blob: ef06b6da7f000f972de9733903f745753f1d9f4b [file] [log] [blame]
/*
* Copyright (c) 2023 Nordic Semiconductor ASA
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nordic_npm1300
#include <errno.h>
#include <zephyr/drivers/i2c.h>
#include <zephyr/sys/util.h>
#include <zephyr/sys/byteorder.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/gpio/gpio_utils.h>
#include <zephyr/drivers/mfd/npm1300.h>
#define TIME_BASE 0x07U
#define MAIN_BASE 0x00U
#define SHIP_BASE 0x0BU
#define GPIO_BASE 0x06U
#define TIME_OFFSET_LOAD 0x03U
#define TIME_OFFSET_TIMER 0x08U
#define MAIN_OFFSET_RESET 0x01U
#define MAIN_OFFSET_SET 0x00U
#define MAIN_OFFSET_CLR 0x01U
#define MAIN_OFFSET_INTENSET 0x02U
#define MAIN_OFFSET_INTENCLR 0x03U
#define SHIP_OFFSET_HIBERNATE 0x00U
#define GPIO_OFFSET_MODE 0x00U
#define TIMER_PRESCALER_MS 16U
#define TIMER_MAX 0xFFFFFFU
#define MAIN_SIZE 0x26U
#define GPIO_MODE_GPOIRQ 5
struct mfd_npm1300_config {
struct i2c_dt_spec i2c;
struct gpio_dt_spec host_int_gpios;
uint8_t pmic_int_pin;
};
struct mfd_npm1300_data {
struct k_mutex mutex;
const struct device *dev;
struct gpio_callback gpio_cb;
struct k_work work;
sys_slist_t callbacks;
};
struct event_reg_t {
uint8_t offset;
uint8_t mask;
};
static const struct event_reg_t event_reg[NPM1300_EVENT_MAX] = {
[NPM1300_EVENT_CHG_COMPLETED] = {0x0AU, 0x10U},
[NPM1300_EVENT_CHG_ERROR] = {0x0AU, 0x20U},
[NPM1300_EVENT_BATTERY_DETECTED] = {0x0EU, 0x01U},
[NPM1300_EVENT_BATTERY_REMOVED] = {0x0EU, 0x02U},
[NPM1300_EVENT_SHIPHOLD_PRESS] = {0x12U, 0x01U},
[NPM1300_EVENT_SHIPHOLD_RELEASE] = {0x12U, 0x02U},
[NPM1300_EVENT_WATCHDOG_WARN] = {0x12U, 0x08U},
[NPM1300_EVENT_VBUS_DETECTED] = {0x16U, 0x01U},
[NPM1300_EVENT_VBUS_REMOVED] = {0x16U, 0x02U}};
static void gpio_callback(const struct device *dev, struct gpio_callback *cb, uint32_t pins)
{
struct mfd_npm1300_data *data = CONTAINER_OF(cb, struct mfd_npm1300_data, gpio_cb);
k_work_submit(&data->work);
}
static void work_callback(struct k_work *work)
{
struct mfd_npm1300_data *data = CONTAINER_OF(work, struct mfd_npm1300_data, work);
const struct mfd_npm1300_config *config = data->dev->config;
uint8_t buf[MAIN_SIZE];
int ret;
/* Read all MAIN registers into temporary buffer */
ret = mfd_npm1300_reg_read_burst(data->dev, MAIN_BASE, 0U, buf, sizeof(buf));
if (ret < 0) {
k_work_submit(&data->work);
return;
}
for (int i = 0; i < NPM1300_EVENT_MAX; i++) {
int offset = event_reg[i].offset + MAIN_OFFSET_CLR;
if ((buf[offset] & event_reg[i].mask) != 0U) {
gpio_fire_callbacks(&data->callbacks, data->dev, BIT(i));
ret = mfd_npm1300_reg_write(data->dev, MAIN_BASE, offset,
event_reg[i].mask);
if (ret < 0) {
k_work_submit(&data->work);
return;
}
}
}
/* Resubmit handler to queue if interrupt is still active */
if (gpio_pin_get_dt(&config->host_int_gpios) != 0) {
k_work_submit(&data->work);
}
}
static int mfd_npm1300_init(const struct device *dev)
{
const struct mfd_npm1300_config *config = dev->config;
struct mfd_npm1300_data *mfd_data = dev->data;
int ret;
if (!i2c_is_ready_dt(&config->i2c)) {
return -ENODEV;
}
k_mutex_init(&mfd_data->mutex);
mfd_data->dev = dev;
if (config->host_int_gpios.port != NULL) {
/* Set specified PMIC pin to be interrupt output */
ret = mfd_npm1300_reg_write(dev, GPIO_BASE, GPIO_OFFSET_MODE + config->pmic_int_pin,
GPIO_MODE_GPOIRQ);
if (ret < 0) {
return ret;
}
/* Configure host interrupt GPIO */
if (!gpio_is_ready_dt(&config->host_int_gpios)) {
return -ENODEV;
}
ret = gpio_pin_configure_dt(&config->host_int_gpios, GPIO_INPUT);
if (ret < 0) {
return ret;
}
gpio_init_callback(&mfd_data->gpio_cb, gpio_callback,
BIT(config->host_int_gpios.pin));
ret = gpio_add_callback(config->host_int_gpios.port, &mfd_data->gpio_cb);
if (ret < 0) {
return ret;
}
mfd_data->work.handler = work_callback;
ret = gpio_pin_interrupt_configure_dt(&config->host_int_gpios,
GPIO_INT_EDGE_TO_ACTIVE);
if (ret < 0) {
return ret;
}
}
return 0;
}
int mfd_npm1300_reg_read_burst(const struct device *dev, uint8_t base, uint8_t offset, void *data,
size_t len)
{
const struct mfd_npm1300_config *config = dev->config;
uint8_t buff[] = {base, offset};
return i2c_write_read_dt(&config->i2c, buff, sizeof(buff), data, len);
}
int mfd_npm1300_reg_read(const struct device *dev, uint8_t base, uint8_t offset, uint8_t *data)
{
return mfd_npm1300_reg_read_burst(dev, base, offset, data, 1U);
}
int mfd_npm1300_reg_write(const struct device *dev, uint8_t base, uint8_t offset, uint8_t data)
{
const struct mfd_npm1300_config *config = dev->config;
uint8_t buff[] = {base, offset, data};
return i2c_write_dt(&config->i2c, buff, sizeof(buff));
}
int mfd_npm1300_reg_write2(const struct device *dev, uint8_t base, uint8_t offset, uint8_t data1,
uint8_t data2)
{
const struct mfd_npm1300_config *config = dev->config;
uint8_t buff[] = {base, offset, data1, data2};
return i2c_write_dt(&config->i2c, buff, sizeof(buff));
}
int mfd_npm1300_reg_update(const struct device *dev, uint8_t base, uint8_t offset, uint8_t data,
uint8_t mask)
{
struct mfd_npm1300_data *mfd_data = dev->data;
uint8_t reg;
int ret;
k_mutex_lock(&mfd_data->mutex, K_FOREVER);
ret = mfd_npm1300_reg_read(dev, base, offset, &reg);
if (ret == 0) {
reg = (reg & ~mask) | (data & mask);
ret = mfd_npm1300_reg_write(dev, base, offset, reg);
}
k_mutex_unlock(&mfd_data->mutex);
return ret;
}
int mfd_npm1300_set_timer(const struct device *dev, uint32_t time_ms)
{
const struct mfd_npm1300_config *config = dev->config;
uint8_t buff[5] = {TIME_BASE, TIME_OFFSET_TIMER};
uint32_t ticks = time_ms / TIMER_PRESCALER_MS;
if (ticks > TIMER_MAX) {
return -EINVAL;
}
sys_put_be24(ticks, &buff[2]);
int ret = i2c_write_dt(&config->i2c, buff, sizeof(buff));
if (ret != 0) {
return ret;
}
return mfd_npm1300_reg_write(dev, TIME_BASE, TIME_OFFSET_LOAD, 1U);
}
int mfd_npm1300_reset(const struct device *dev)
{
return mfd_npm1300_reg_write(dev, MAIN_BASE, MAIN_OFFSET_RESET, 1U);
}
int mfd_npm1300_hibernate(const struct device *dev, uint32_t time_ms)
{
int ret = mfd_npm1300_set_timer(dev, time_ms);
if (ret != 0) {
return ret;
}
return mfd_npm1300_reg_write(dev, SHIP_BASE, SHIP_OFFSET_HIBERNATE, 1U);
}
int mfd_npm1300_add_callback(const struct device *dev, struct gpio_callback *callback)
{
struct mfd_npm1300_data *data = dev->data;
/* Enable interrupts for specified events */
for (int i = 0; i < NPM1300_EVENT_MAX; i++) {
if ((callback->pin_mask & BIT(i)) != 0U) {
/* Clear pending interrupt */
int ret = mfd_npm1300_reg_write(data->dev, MAIN_BASE,
event_reg[i].offset + MAIN_OFFSET_CLR,
event_reg[i].mask);
if (ret < 0) {
return ret;
}
ret = mfd_npm1300_reg_write(data->dev, MAIN_BASE,
event_reg[i].offset + MAIN_OFFSET_INTENSET,
event_reg[i].mask);
if (ret < 0) {
return ret;
}
}
}
return gpio_manage_callback(&data->callbacks, callback, true);
}
int mfd_npm1300_remove_callback(const struct device *dev, struct gpio_callback *callback)
{
struct mfd_npm1300_data *data = dev->data;
return gpio_manage_callback(&data->callbacks, callback, false);
}
#define MFD_NPM1300_DEFINE(inst) \
static struct mfd_npm1300_data data_##inst; \
\
static const struct mfd_npm1300_config config##inst = { \
.i2c = I2C_DT_SPEC_INST_GET(inst), \
.host_int_gpios = GPIO_DT_SPEC_INST_GET_OR(inst, host_int_gpios, {0}), \
.pmic_int_pin = DT_INST_PROP_OR(inst, pmic_int_pin, 0), \
}; \
\
DEVICE_DT_INST_DEFINE(inst, mfd_npm1300_init, NULL, &data_##inst, &config##inst, \
POST_KERNEL, CONFIG_MFD_NPM1300_INIT_PRIORITY, NULL);
DT_INST_FOREACH_STATUS_OKAY(MFD_NPM1300_DEFINE)