blob: 5c8f319a7c51d2a9d655b6fb454f2595290e93b2 [file] [log] [blame]
# Copyright (c) 2021 TOKITA Hiroshi <tokita.hiroshi@gmail.com>
# SPDX-License-Identifier: Apache-2.0
description: |
Nuclei System Timer
The Nuclei system timer provides RISC-V privileged mtime and mtimecmp
registers.
compatible: "nuclei,systimer"
include: base.yaml
properties:
reg:
required: true
interrupts:
required: true
clk-divider:
type: int
description: |
clk-divider specifies the division ratio to the CPU frequency that
clock used by the system timer.
This property supports the case that the system timer and CPU use
different clock sources.
This configuration is used sometimes for such as low power consumption.
For example, the CPU clock frequency is 108MHz, and the system timer
uses 27MHz, which is the CPU clock divided by 4.
In this case, the CPU clock frequency is defined in the CPU node
as follows
clock-frequency = <108000000>;
This property takes exponent of the power of 2.
The relationship with the frequency division ratio is as
following equation.
division_ratio = 2^n
n = log_2(division_ratio)
Setting clk-divider to 2 specifies the system timer uses the clock
that CPU clock frequency divided by (2^2=)4, or 27MHz.
Division ratio constants can be found in the
dt-bindings/timer/nuclei-systimer.h header file.