| # BSD Sockets compatible API |
| |
| # Copyright (c) 2017 Linaro Limited. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig NET_SOCKETS |
| bool "BSD Sockets compatible API" |
| select FDTABLE |
| help |
| Provide BSD Sockets like API on top of native Zephyr networking API. |
| |
| if NET_SOCKETS |
| |
| config NET_SOCKETS_PRIORITY_DEFAULT |
| int "Default processing priority for sockets" |
| default 50 |
| help |
| Default processing priority for socket implementations. This defines |
| the order of processing of particular socket implementations when |
| creating a new socket, lower value indicate earlier processing. This |
| allows to for instance prioritize offloaded socket processing during |
| socket creation over the native one, or vice versa. |
| |
| config NET_SOCKETS_POSIX_NAMES |
| bool "POSIX names for Sockets API (without full POSIX API)" |
| default y if !POSIX_API |
| depends on !POSIX_API |
| help |
| With this option, Socket API functions are available under the |
| standard POSIX names like socket(), recv(), and close(), etc., |
| even if full POSIX API (CONFIG_POSIX_API) is not enabled. (Note |
| that close() may require a special attention, as in POSIX it |
| closes any file descriptor, while with this option enabled, it |
| will apply only to sockets.) |
| |
| Various networking libraries require either |
| CONFIG_NET_SOCKETS_POSIX_NAMES or CONFIG_POSIX_API to be set. |
| If both are disabled, Zephyr's socket functions will be |
| available (only) with ``zsock_`` prefix, (e.g. `zsock_socket`). |
| This is useful only in peculiar cases, e.g. when integrating |
| with 3rd-party socket libraries. |
| |
| config NET_SOCKETS_POLL_MAX |
| int "Max number of supported poll() entries" |
| default 6 if WIFI_NM_WPA_SUPPLICANT |
| default 3 |
| help |
| Maximum number of entries supported for poll() call. |
| |
| config NET_SOCKETS_CONNECT_TIMEOUT |
| int "Timeout value in milliseconds to CONNECT" |
| default 3000 |
| range 0 60000 |
| help |
| This variable specifies time in milliseconds after connect() |
| API call will timeout if we have not received SYN-ACK from |
| peer. |
| |
| config NET_SOCKETS_DNS_TIMEOUT |
| int "Timeout value in milliseconds for DNS queries" |
| default 2000 |
| range 1000 300000 |
| depends on DNS_RESOLVER |
| help |
| This variable specifies time in milliseconds after which DNS |
| query is considered timeout. Minimum timeout is 1 second and |
| maximum timeout is 5 min. |
| |
| config NET_SOCKET_MAX_SEND_WAIT |
| int "Max time in milliseconds waiting for a send command" |
| default 10000 |
| help |
| The maximum time a socket is waiting for a blocked connection before |
| returning an ENOBUFS error. |
| |
| config NET_SOCKETS_SERVICE |
| bool "Socket service support [EXPERIMENTAL]" |
| select EXPERIMENTAL |
| select EVENTFD |
| help |
| The socket service can monitor multiple sockets and save memory |
| by only having one thread listening socket data. If data is received |
| in the monitored socket, a user supplied work is called. |
| Note that you need to set CONFIG_NET_SOCKETS_POLL_MAX high enough |
| so that enough sockets entries can be serviced. This depends on |
| system needs as multiple services can be activated at the same time |
| depending on network configuration. |
| |
| config NET_SOCKETS_SERVICE_THREAD_PRIO |
| int "Priority of the socket service dispatcher thread" |
| default NUM_PREEMPT_PRIORITIES |
| depends on NET_SOCKETS_SERVICE |
| help |
| Set the priority of the socket service dispatcher thread. This handler |
| polls the sockets and either places the triggered socket to work queue |
| for asynchronous handlers, or calls the user supplied callback directly |
| for synchronous handlers. |
| The value should be selected carefully because if this thread priority |
| is too high, the work queue handlers might not be able to run if using |
| asynchronous handlers that are called via a work queue. |
| |
| Note that >= 0 value means preemptive thread priority, the lowest |
| value is NUM_PREEMPT_PRIORITIES. |
| Highest preemptive thread priority is 0. |
| Lowest cooperative thread priority is -1. |
| Highest cooperative thread priority is -NUM_COOP_PRIORITIES. |
| Make sure the priority is lower than workqueue priority so that |
| we never block the workqueue handler. |
| |
| config NET_SOCKETS_SERVICE_STACK_SIZE |
| int "Stack size for the thread handling socket services" |
| default 2400 if NET_DHCPV4_SERVER |
| default 1200 |
| depends on NET_SOCKETS_SERVICE |
| help |
| Set the internal stack size for the thread that polls sockets. |
| |
| config NET_SOCKETS_SERVICE_INIT_PRIO |
| int "Startup priority for the network socket service" |
| default 95 |
| depends on NET_SOCKETS_SERVICE |
| |
| config NET_SOCKETS_SOCKOPT_TLS |
| bool "TCP TLS socket option support [EXPERIMENTAL]" |
| imply TLS_CREDENTIALS |
| select MBEDTLS if NET_NATIVE |
| select EXPERIMENTAL |
| help |
| Enable TLS socket option support which automatically establishes |
| a TLS connection to the remote host. |
| |
| config NET_SOCKETS_TLS_PRIORITY |
| int "Default processing priority for TLS sockets" |
| default 45 |
| help |
| Processing priority for TLS sockets. Should be lower than |
| NET_SOCKETS_PRIORITY_DEFAULT in order to be processed correctly. |
| |
| config NET_SOCKETS_TLS_SET_MAX_FRAGMENT_LENGTH |
| bool "Set Maximum Fragment Length (MFL)" |
| default y |
| help |
| Call mbedtls_ssl_conf_max_frag_len() on created TLS context |
| configuration, so that Maximum Fragment Length (MFL) will be sent to |
| peer using RFC 6066 max_fragment_length extension. |
| |
| Maximum Fragment Length (MFL) value is automatically chosen based on |
| MBEDTLS_SSL_OUT_CONTENT_LEN and MBEDTLS_SSL_IN_CONTENT_LEN mbed TLS |
| macros (which are configured by CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN in |
| case of default mbed TLS config). |
| |
| This is mostly useful for TLS client side to tell TLS server what is |
| the maximum supported receive record length. |
| |
| config NET_SOCKETS_ENABLE_DTLS |
| bool "DTLS socket support [EXPERIMENTAL]" |
| depends on NET_SOCKETS_SOCKOPT_TLS |
| select MBEDTLS_DTLS if NET_NATIVE |
| select EXPERIMENTAL |
| help |
| Enable DTLS socket support. By default only TLS over TCP is supported. |
| |
| config NET_SOCKETS_DTLS_TIMEOUT |
| int "Timeout value in milliseconds for DTLS connection" |
| default 5000 |
| depends on NET_SOCKETS_ENABLE_DTLS |
| help |
| This variable specifies time in milliseconds after which DTLS |
| connection is considered dead by TLS server and DTLS resources are |
| freed. This is needed to prevent situation when DTLS client shuts down |
| without closing connection gracefully, which can prevent other peers |
| from connecting. Value of 0 indicates no timeout - resources will be |
| freed only when connection is gracefully closed by peer sending TLS |
| notification or socket is closed. |
| |
| config NET_SOCKETS_TLS_MAX_CONTEXTS |
| int "Maximum number of TLS/DTLS contexts" |
| default 1 |
| depends on NET_SOCKETS_SOCKOPT_TLS |
| help |
| "This variable specifies maximum number of TLS/DTLS contexts that can |
| be allocated at the same time." |
| |
| config NET_SOCKETS_TLS_MAX_CREDENTIALS |
| int "Maximum number of TLS/DTLS credentials per socket" |
| default 4 |
| depends on NET_SOCKETS_SOCKOPT_TLS |
| help |
| This variable sets maximum number of TLS/DTLS credentials that can be |
| used with a specific socket. |
| |
| config NET_SOCKETS_TLS_MAX_CIPHERSUITES |
| int "Maximum number of TLS/DTLS ciphersuites per socket" |
| default 4 |
| depends on NET_SOCKETS_SOCKOPT_TLS |
| help |
| This variable sets maximum number of TLS/DTLS ciphersuites that can |
| be used with specific socket, if set explicitly by socket option. |
| By default, all ciphersuites that are available in the system are |
| available to the socket. |
| |
| config NET_SOCKETS_TLS_MAX_APP_PROTOCOLS |
| int "Maximum number of supported application layer protocols" |
| default 2 |
| depends on NET_SOCKETS_SOCKOPT_TLS && MBEDTLS_SSL_ALPN |
| help |
| This variable sets maximum number of supported application layer |
| protocols over TLS/DTLS that can be set explicitly by a socket option. |
| By default, no supported application layer protocol is set. |
| |
| config NET_SOCKETS_TLS_MAX_CLIENT_SESSION_COUNT |
| int "Maximum number of stored client TLS/DTLS sessions" |
| default 1 |
| depends on NET_SOCKETS_SOCKOPT_TLS |
| help |
| This variable specifies maximum number of stored TLS/DTLS sessions, |
| used for TLS/DTLS session resumption. |
| |
| config NET_SOCKETS_OFFLOAD |
| bool "Offload Socket APIs" |
| help |
| Enables direct offloading of socket operations to dedicated TCP/IP |
| hardware. |
| This feature is intended to save resources by bypassing the Zephyr |
| TCP/IP stack in the case where there is only one network interface |
| required in the system, providing full BSD socket offload capability. |
| As a result, it bypasses any potential IP routing that Zephyr might |
| provide between multiple network interfaces. |
| See NET_OFFLOAD for a more deeply integrated approach which offloads |
| from the net_context() API within the Zephyr IP stack. |
| |
| config NET_SOCKETS_OFFLOAD_PRIORITY |
| int "Default processing priority for offloaded sockets" |
| default 40 |
| help |
| Processing priority for offloaded sockets. |
| |
| If native TLS is enabled, lower value than NET_SOCKETS_TLS_PRIORITY |
| means that TLS will be offloaded as well (if supported by offloaded |
| socket implementation). Higher value than NET_SOCKETS_TLS_PRIORITY |
| means that native TLS will be used. |
| |
| config NET_SOCKETS_OFFLOAD_DISPATCHER |
| bool "Intermediate socket offloading layer" |
| depends on NET_SOCKETS_OFFLOAD |
| help |
| If enabled, an intermediate socket offloading layer is included |
| (called socket dispatcher), allowing to select an offloaded network |
| interface and thus socket implementation with SO_BINDTODEVICE socket |
| option. This can be useful, when multiple offloaded sockets |
| implementations are available in the system, allowing to easily bind |
| a socket to a particular implementation. |
| |
| config NET_SOCKETS_OFFLOAD_DISPATCHER_CONTEXT_MAX |
| int "Maximum number of dispatcher sockets created" |
| default 4 |
| depends on NET_SOCKETS_OFFLOAD_DISPATCHER |
| help |
| Maximum number of dispatcher sockets created at a time. Note, that |
| only sockets that has not been dispatched yet count into the limit. |
| After a proper socket has been created for a given file descriptor, |
| the dispatcher context is released and can be reused. |
| |
| config NET_SOCKETS_PACKET |
| bool "Packet socket support" |
| select NET_CONNECTION_SOCKETS |
| help |
| This is an initial version of packet socket support (special type |
| raw socket). Packets are passed to and from the device driver |
| without any changes in the packet headers. It's API caller |
| responsibility to provide all the headers (e.g L2, L3 and so on) |
| while sending. While receiving, packets (including all the headers) |
| will be fed to sockets unchanged as provided by the driver. |
| |
| config NET_SOCKETS_PACKET_DGRAM |
| bool "Packet socket SOCK_DGRAM support" |
| depends on NET_SOCKETS_PACKET |
| default y |
| help |
| For AF_PACKET sockets with SOCK_DGRAM type, the L2 header |
| is removed before the packet is passed to the user. Packets sent |
| through a SOCK_DGRAM packet socket get a suitable L2 header based |
| on the information in the sockaddr_ll destination address before |
| they are queued. |
| |
| config NET_SOCKETS_CAN |
| bool "Socket CAN support [EXPERIMENTAL]" |
| select NET_L2_CANBUS_RAW |
| select NET_CONNECTION_SOCKETS |
| select EXPERIMENTAL |
| help |
| The value depends on your network needs. |
| |
| config NET_SOCKETS_CAN_RECEIVERS |
| int "How many simultaneous SocketCAN receivers are allowed" |
| default 1 |
| depends on NET_SOCKETS_CAN |
| help |
| The value tells how many sockets can receive data from same |
| Socket-CAN interface. |
| |
| config NET_SOCKETPAIR |
| bool "Support for socketpair" |
| select PIPES |
| help |
| Communicate over a pair of connected, unnamed UNIX domain sockets. |
| |
| if NET_SOCKETPAIR |
| |
| config NET_SOCKETPAIR_BUFFER_SIZE |
| int "Size of the intermediate buffer, in bytes" |
| default 4096 if WIFI_NM_WPA_SUPPLICANT |
| default 64 |
| range 1 4096 |
| help |
| Buffer size for socketpair(2) |
| |
| choice |
| prompt "Memory management for socketpair" |
| default NET_SOCKETPAIR_HEAP if HEAP_MEM_POOL_SIZE != 0 |
| |
| config NET_SOCKETPAIR_STATIC |
| bool "Pre-allocate memory statically" |
| |
| config NET_SOCKETPAIR_HEAP |
| bool "Use heap for allocating socketpairs" |
| depends on HEAP_MEM_POOL_SIZE != 0 |
| |
| endchoice |
| |
| if NET_SOCKETPAIR_STATIC |
| config NET_SOCKETPAIR_MAX |
| int "How many socketpairs to pre-allocate" |
| default 1 |
| endif |
| endif |
| |
| config NET_SOCKETS_NET_MGMT |
| bool "Network management socket support [EXPERIMENTAL]" |
| depends on NET_MGMT_EVENT |
| select NET_MGMT_EVENT_INFO |
| select EXPERIMENTAL |
| help |
| Select this if you want to use socket API to get network |
| managements events to your application. |
| |
| config NET_SOCKETS_NET_MGMT_MAX_LISTENERS |
| int "Max number of sockets to listen" |
| default 1 |
| depends on NET_SOCKETS_NET_MGMT |
| help |
| This sets the maximum number of net_mgmt sockets that can |
| be set by the socket interface. So if you have two separate |
| sockets that are used for listening events, you need to set |
| this to two. |
| |
| module = NET_SOCKETS |
| module-dep = NET_LOG |
| module-str = Log level for BSD sockets compatible API calls |
| module-help = Enables logging for sockets code. |
| source "subsys/net/Kconfig.template.log_config.net" |
| |
| config NET_SOCKETS_OBJ_CORE |
| bool "Object core socket support [EXPERIMENTAL]" |
| depends on OBJ_CORE |
| select OBJ_CORE_STATS |
| select EXPERIMENTAL |
| help |
| Select this if you want to use object core with socket API to get |
| network socket information and statistics via object core. |
| The net-shell "net sockets" command will use this functionality |
| to show the socket information. |
| |
| endif # NET_SOCKETS |
