| # Copyright (c) 2017 Linaro Limited |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig LWM2M_IPSO_SUPPORT |
| bool "IPSO Alliance Smart Object Support" |
| help |
| This option adds general support for IPSO objects |
| |
| if LWM2M_IPSO_SUPPORT |
| |
| config LWM2M_IPSO_TIMESTAMP_EXTENSIONS |
| bool "Nonstandard IPSO object Timestamp resources" |
| help |
| If you enable this option, various IPSO objects supported below |
| will optionally include timestamp resources (ID 5518). |
| This is an LWM2M protocol extension which can be useful to associate |
| times with events. If unsure, leave at the default n. |
| |
| config LWM2M_IPSO_TEMP_SENSOR |
| bool "IPSO Temperature Sensor Support" |
| help |
| This IPSO object should be used with a temperature sensor to |
| report a temperature measurement. It also provides resources for |
| minimum/maximum measured values and the minimum/maximum range |
| that can be measured by the temperature sensor. |
| |
| config LWM2M_IPSO_TEMP_SENSOR_INSTANCE_COUNT |
| int "Maximum # of IPSO Temperature Sensor object instances" |
| default 1 |
| depends on LWM2M_IPSO_TEMP_SENSOR |
| help |
| This setting establishes the total count of IPSO Temperature |
| Sensor instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_TEMP_SENSOR_TIMESTAMP |
| bool "Add timestamp resources to IPSO temperature objects" |
| default y |
| depends on LWM2M_IPSO_TEMP_SENSOR && LWM2M_IPSO_TIMESTAMP_EXTENSIONS |
| help |
| Add a non-standard timestamp resource to each temperature object. |
| |
| config LWM2M_IPSO_LIGHT_CONTROL |
| bool "IPSO Light Control Support" |
| help |
| This Object is used to control a light source, such as a LED or other |
| light. It allows a light to be turned on or off and its dimmer |
| setting to be controlled as a % between 0 and 100. An optional color |
| setting enables a string to be used to indicate the desired color. |
| |
| config LWM2M_IPSO_LIGHT_CONTROL_INSTANCE_COUNT |
| int "Maximum # of IPSO Light Control object instances" |
| default 1 |
| depends on LWM2M_IPSO_LIGHT_CONTROL |
| help |
| This setting establishes the total count of IPSO Light Control |
| instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_ACCELEROMETER |
| bool "IPSO Accelerometer Support" |
| help |
| This Object is used to used to represent a 1-3 axis accelerometer. |
| |
| config LWM2M_IPSO_ACCELEROMETER_INSTANCE_COUNT |
| int "Maximum # of IPSO Accelerometer object instances" |
| default 1 |
| depends on LWM2M_IPSO_ACCELEROMETER |
| help |
| This setting establishes the total count of IPSO Accelerometer |
| instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_ACCELEROMETER_TIMESTAMP |
| bool "Add timestamp resources to IPSO accelerometer objects" |
| default y |
| depends on LWM2M_IPSO_ACCELEROMETER && LWM2M_IPSO_TIMESTAMP_EXTENSIONS |
| help |
| Add a non-standard timestamp resource to each accelerometer object. |
| |
| config LWM2M_IPSO_BUZZER |
| bool "IPSO Buzzer Support" |
| help |
| This Object is used to actuate an audible alarm such as a buzzer, |
| beeper, or vibration alarm. |
| |
| config LWM2M_IPSO_BUZZER_INSTANCE_COUNT |
| int "Maximum # of IPSO Buzzer instances" |
| default 1 |
| depends on LWM2M_IPSO_BUZZER |
| help |
| This setting establishes the total count of IPSO Buzzer |
| instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_TIMER |
| bool "IPSO Light Control Support" |
| help |
| This Object is used to time events / actions |
| |
| config LWM2M_IPSO_TIMER_INSTANCE_COUNT |
| int "Maximum # of IPSO Timer object instances" |
| default 1 |
| depends on LWM2M_IPSO_TIMER |
| help |
| This setting establishes the total count of IPSO Timer |
| instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_ONOFF_SWITCH |
| bool "IPSO On/Off Switch Support" |
| help |
| This object is used with an On/Off switch to report it's state. |
| |
| config LWM2M_IPSO_ONOFF_SWITCH_INSTANCE_COUNT |
| int "Maximum # of IPSO On/Off Switch object instances" |
| default 1 |
| depends on LWM2M_IPSO_ONOFF_SWITCH |
| help |
| This setting establishes the total count of IPSO On/Off Switch |
| instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_ONOFF_SWITCH_TIMESTAMP |
| bool "Add a timestamp resource to IPSO on/off switch objects" |
| default y |
| depends on LWM2M_IPSO_ONOFF_SWITCH && LWM2M_IPSO_TIMESTAMP_EXTENSIONS |
| help |
| Add a non-standard timestamp resource to each on/off switch object. |
| |
| config LWM2M_IPSO_PUSH_BUTTON |
| bool "IPSO Push Button Support" |
| help |
| This Object is used to report the state of a momentary action push |
| button control and to count the number of times the control has |
| been operated since the last observation. |
| |
| config LWM2M_IPSO_PUSH_BUTTON_INSTANCE_COUNT |
| int "Maximum # of IPSO On/Off Switch object instances" |
| default 1 |
| depends on LWM2M_IPSO_PUSH_BUTTON |
| help |
| This setting establishes the total count of IPSO Push Button |
| instances available to the LWM2M client. |
| |
| config LWM2M_IPSO_PUSH_BUTTON_TIMESTAMP |
| bool "Add a timestamp resource to IPSO Push Button objects" |
| default y |
| depends on LWM2M_IPSO_PUSH_BUTTON && LWM2M_IPSO_TIMESTAMP_EXTENSIONS |
| help |
| Add a non-standard timestamp resource to each Push Button object. |
| |
| endif # LWM2M_LWM2M_IPSO_SUPPORT |
