boards/arm/stm32h747i_disco/stm32h747i_disco_m7_defconfig

# SPDX-License-Identifier: Apache-2.0

CONFIG_SOC_SERIES_STM32H7X=y
CONFIG_SOC_STM32H747XX=y

# Board config should be specified since there are 2 possible targets
CONFIG_BOARD_STM32H747I_DISCO_M7=y

# enable pinmux
CONFIG_PINMUX=y

# enable GPIO
CONFIG_GPIO=y

# clock configuration
CONFIG_CLOCK_CONTROL=y

# Clock configuration for Cube Clock control driver
CONFIG_CLOCK_STM32_HSE_CLOCK=25000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y

# use HSE (bypass) as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
CONFIG_CLOCK_STM32_HSE_BYPASS=y

# produce 400MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=5
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=160
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2

# Enable MPU
CONFIG_ARM_MPU=y

# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y

# Disable following to assign serial ports to m4 core

# enable uart driver
CONFIG_SERIAL=y
# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y