| # SPDX-License-Identifier: Apache-2.0 |
| |
| # Platform Configuration |
| CONFIG_SOC_SERIES_STM32F1X=y |
| CONFIG_SOC_STM32F100XB=y |
| |
| # 24MHz system clock |
| CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=24000000 |
| |
| # Enable MPU |
| CONFIG_ARM_MPU=y |
| |
| # Enable HW stack protection |
| CONFIG_HW_STACK_PROTECTION=y |
| |
| # enable uart driver |
| CONFIG_SERIAL=y |
| |
| # enable console |
| CONFIG_CONSOLE=y |
| CONFIG_UART_CONSOLE=y |
| |
| # enable pinmux |
| CONFIG_PINMUX=y |
| |
| # enable GPIO |
| CONFIG_GPIO=y |
| |
| # clock configuration |
| CONFIG_CLOCK_CONTROL=y |
| |
| CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y |
| |
| CONFIG_CLOCK_STM32_PLL_SRC_HSI=y |
| # produce 24MHz clock from PLL output using 8MHz oscillator on the board |
| CONFIG_CLOCK_STM32_PLL_MULTIPLIER=6 |
| CONFIG_CLOCK_STM32_AHB_PRESCALER=1 |
| CONFIG_CLOCK_STM32_APB1_PRESCALER=2 |
| CONFIG_CLOCK_STM32_APB2_PRESCALER=1 |
