blob: 3a14c7367acadea2ab94380cad2b6c1daac463d2 [file] [log] [blame]
Title: Send Tracing Formated Packet To The Host With Supported Backends
Description:
This application can be used to demonstrate the tracing feature. The tracing
formated packet will be sent to the host with the currently supported tracing
backend under tracing generic infrastructure.
--------------------------------------------------------------------------------
Usage for UART Tracing Backend:
Build a UART-tracing image with:
cmake -DBOARD=mps2_an521 -DCONF_FILE=prj_uart.conf ..
or:
cmake -DBOARD=mps2_an521 -DCONF_FILE=prj_uart_ctf.conf ..
After the application has run for a while, check the trace output file.
--------------------------------------------------------------------------------
Usage for USB Tracing Backend
Build a USB-tracing image with:
cmake -DBOARD=sam_e70_xplained -DCONF_FILE=prj_usb.conf ..
or:
cmake -DBOARD=sam_e70_xplained -DCONF_FILE=prj_usb_ctf.conf ..
After the serial console has stable output like this:
threadA: Hello World!
threadB: Hello World!
threadA: Hello World!
threadB: Hello World!
connect the board's USB port to the host device and
run the trace_capture_usb.py script on the host:
sudo python3 trace_capture_usb.py -v 0x2FE9 -p 0x100 -o channel0_0
The VID and PID of USB device can be configured, just adjusting it accordingly.
--------------------------------------------------------------------------------
Usage for POSIX Tracing Backend
Build a POSIX-tracing image with:
cmake -DBOARD=native_posix -DCONF_FILE=prj_native_posix.conf ..
or:
cmake -DBOARD=native_posix -DCONF_FILE=prj_native_posix_ctf.conf ..
After the application has run for a while, check the trace output file.