blob: d4e517cc094898c1298f494669e09d1046cd2d9e [file] [log] [blame]
/*
* Copyright (c) 2015 Intel Corporation.
* Copyright (c) 2020 Norbit ODM AS
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nxp_pca95xx
/**
* @file Driver for PCA95XX I2C-based GPIO driver.
*/
#include <errno.h>
#include <kernel.h>
#include <device.h>
#include <init.h>
#include <sys/byteorder.h>
#include <sys/util.h>
#include <drivers/gpio.h>
#include <drivers/i2c.h>
#include "gpio_utils.h"
#define LOG_LEVEL CONFIG_GPIO_LOG_LEVEL
#include <logging/log.h>
LOG_MODULE_REGISTER(gpio_pca95xx);
/* Register definitions */
#define REG_INPUT_PORT0 0x00
#define REG_INPUT_PORT1 0x01
#define REG_OUTPUT_PORT0 0x02
#define REG_OUTPUT_PORT1 0x03
#define REG_POL_INV_PORT0 0x04
#define REG_POL_INV_PORT1 0x05
#define REG_CONF_PORT0 0x06
#define REG_CONG_PORT1 0x07
#define REG_OUT_DRV_STRENGTH_PORT0_L 0x40
#define REG_OUT_DRV_STRENGTH_PORT0_H 0x41
#define REG_OUT_DRV_STRENGTH_PORT1_L 0x42
#define REG_OUT_DRV_STRENGTH_PORT1_H 0x43
#define REG_INPUT_LATCH_PORT0 0x44
#define REG_INPUT_LATCH_PORT1 0x45
#define REG_PUD_EN_PORT0 0x46
#define REG_PUD_EN_PORT1 0x47
#define REG_PUD_SEL_PORT0 0x48
#define REG_PUD_SEL_PORT1 0x49
#define REG_INT_MASK_PORT0 0x4A
#define REG_INT_MASK_PORT1 0x4B
#define REG_INT_STATUS_PORT0 0x4C
#define REG_INT_STATUS_PORT1 0x4D
#define REG_OUTPUT_PORT_CONF 0x4F
/* Driver flags */
#define PCA_HAS_PUD BIT(0)
#define PCA_HAS_INTERRUPT BIT(1)
/** Configuration data */
struct gpio_pca95xx_config {
/* gpio_driver_config needs to be first */
struct gpio_driver_config common;
/** The master I2C device's name */
const char * const i2c_master_dev_name;
/** The slave address of the chip */
uint16_t i2c_slave_addr;
uint8_t capabilities;
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
/* Interrupt pin definition */
const char *int_gpio_port;
gpio_pin_t int_gpio_pin;
gpio_flags_t int_gpio_flags;
#endif
};
/** Runtime driver data */
struct gpio_pca95xx_drv_data {
/* gpio_driver_data needs to be first */
struct gpio_driver_data common;
/** Master I2C device */
const struct device *i2c_master;
struct {
uint16_t input;
uint16_t output;
uint16_t dir;
uint16_t pud_en;
uint16_t pud_sel;
} reg_cache;
struct k_sem lock;
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
/* Self-reference to the driver instance */
const struct device *instance;
/* port ISR callback routine address */
sys_slist_t callbacks;
/* interrupt triggering pin masks */
struct {
uint16_t edge_rising;
uint16_t edge_falling;
uint16_t level_high;
uint16_t level_low;
} interrupts;
struct gpio_callback gpio_callback;
struct k_work interrupt_worker;
bool interrupt_active;
#endif
};
/**
* @brief Read both port 0 and port 1 registers of certain register function.
*
* Given the register in reg, read the pair of port 0 and port 1.
*
* @param dev Device struct of the PCA95XX.
* @param reg Register to read (the PORT0 of the pair of registers).
* @param cache Pointer to the cache to be updated after successful read.
* @param buf Buffer to read data into.
*
* @return 0 if successful, failed otherwise.
*/
static int read_port_regs(const struct device *dev, uint8_t reg,
uint16_t *cache, uint16_t *buf)
{
const struct gpio_pca95xx_config * const config = dev->config;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
const struct device *i2c_master = drv_data->i2c_master;
uint16_t i2c_addr = config->i2c_slave_addr;
uint16_t port_data, value;
int ret;
ret = i2c_burst_read(i2c_master, i2c_addr, reg,
(uint8_t *)&port_data, sizeof(port_data));
if (ret != 0) {
LOG_ERR("PCA95XX[0x%X]: error reading register 0x%X (%d)",
i2c_addr, reg, ret);
return ret;
}
value = sys_le16_to_cpu(port_data);
*cache = value;
*buf = value;
LOG_DBG("PCA95XX[0x%X]: Read: REG[0x%X] = 0x%X, REG[0x%X] = 0x%X",
i2c_addr, reg, (*buf & 0xFF), (reg + 1), (*buf >> 8));
return 0;
}
/**
* @brief Write both port 0 and port 1 registers of certain register function.
*
* Given the register in reg, write the pair of port 0 and port 1.
*
* @param dev Device struct of the PCA95XX.
* @param reg Register to write into (the PORT0 of the pair of registers).
* @param cache Pointer to the cache to be updated after successful write.
* @param value New value to set.
*
* @return 0 if successful, failed otherwise.
*/
static int write_port_regs(const struct device *dev, uint8_t reg,
uint16_t *cache, uint16_t value)
{
const struct gpio_pca95xx_config * const config = dev->config;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
const struct device *i2c_master = drv_data->i2c_master;
uint16_t i2c_addr = config->i2c_slave_addr;
uint8_t buf[3];
int ret;
LOG_DBG("PCA95XX[0x%X]: Write: REG[0x%X] = 0x%X, REG[0x%X] = "
"0x%X", i2c_addr, reg, (value & 0xFF),
(reg + 1), (value >> 8));
buf[0] = reg;
sys_put_le16(value, &buf[1]);
ret = i2c_write(i2c_master, buf, sizeof(buf), i2c_addr);
if (ret == 0) {
*cache = value;
} else {
LOG_ERR("PCA95XX[0x%X]: error writing to register 0x%X "
"(%d)", i2c_addr, reg, ret);
}
return ret;
}
static inline int update_input_regs(const struct device *dev, uint16_t *buf)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
return read_port_regs(dev, REG_INPUT_PORT0,
&drv_data->reg_cache.input, buf);
}
static inline int update_output_regs(const struct device *dev, uint16_t value)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
return write_port_regs(dev, REG_OUTPUT_PORT0,
&drv_data->reg_cache.output, value);
}
static inline int update_direction_regs(const struct device *dev,
uint16_t value)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
return write_port_regs(dev, REG_CONF_PORT0,
&drv_data->reg_cache.dir, value);
}
static inline int update_pul_sel_regs(const struct device *dev,
uint16_t value)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
return write_port_regs(dev, REG_PUD_SEL_PORT0,
&drv_data->reg_cache.pud_sel, value);
}
static inline int update_pul_en_regs(const struct device *dev, uint16_t value)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
return write_port_regs(dev, REG_PUD_EN_PORT0,
&drv_data->reg_cache.pud_en, value);
}
/**
* @brief Setup the pin direction (input or output)
*
* @param dev Device struct of the PCA95XX
* @param pin The pin number
* @param flags Flags of pin or port
*
* @return 0 if successful, failed otherwise
*/
static int setup_pin_dir(const struct device *dev, uint32_t pin, int flags)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
uint16_t reg_dir = drv_data->reg_cache.dir;
uint16_t reg_out = drv_data->reg_cache.output;
int ret;
/* For each pin, 0 == output, 1 == input */
if ((flags & GPIO_OUTPUT) != 0U) {
if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
reg_out |= BIT(pin);
} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
reg_out &= ~BIT(pin);
}
reg_dir &= ~BIT(pin);
} else {
reg_dir |= BIT(pin);
}
ret = update_output_regs(dev, reg_out);
if (ret != 0) {
return ret;
}
ret = update_direction_regs(dev, reg_dir);
return ret;
}
/**
* @brief Setup the pin pull up/pull down status
*
* @param dev Device struct of the PCA95XX
* @param pin The pin number
* @param flags Flags of pin or port
*
* @return 0 if successful, failed otherwise
*/
static int setup_pin_pullupdown(const struct device *dev, uint32_t pin,
int flags)
{
const struct gpio_pca95xx_config * const config = dev->config;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
uint16_t reg_pud;
int ret;
if ((config->capabilities & PCA_HAS_PUD) == 0) {
/* Chip does not support pull up/pull down */
if ((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0U) {
return -ENOTSUP;
}
/* If both GPIO_PULL_UP and GPIO_PULL_DOWN are not set,
* we should disable them in hardware. But need to skip
* if the chip does not support pull up/pull down.
*/
return 0;
}
/* If disabling pull up/down, there is no need to set the selection
* register. Just go straight to disabling.
*/
if ((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0U) {
/* Setup pin pull up or pull down */
reg_pud = drv_data->reg_cache.pud_sel;
/* pull down == 0, pull up == 1 */
WRITE_BIT(reg_pud, pin, (flags & GPIO_PULL_UP) != 0U);
ret = update_pul_sel_regs(dev, reg_pud);
if (ret) {
return ret;
}
}
/* enable/disable pull up/down */
reg_pud = drv_data->reg_cache.pud_en;
WRITE_BIT(reg_pud, pin,
(flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0U);
ret = update_pul_en_regs(dev, reg_pud);
return ret;
}
/**
* @brief Configure pin or port
*
* @param dev Device struct of the PCA95XX
* @param pin The pin number
* @param flags Flags of pin or port
*
* @return 0 if successful, failed otherwise
*/
static int gpio_pca95xx_config(const struct device *dev,
gpio_pin_t pin, gpio_flags_t flags)
{
int ret;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
#if (CONFIG_GPIO_LOG_LEVEL >= LOG_LEVEL_DEBUG)
const struct gpio_pca95xx_config * const config = dev->config;
uint16_t i2c_addr = config->i2c_slave_addr;
#endif
/* Does not support disconnected pin */
if ((flags & (GPIO_INPUT | GPIO_OUTPUT)) == GPIO_DISCONNECTED) {
return -ENOTSUP;
}
/* Open-drain support is per port, not per pin.
* So can't really support the API as-is.
*/
if ((flags & GPIO_SINGLE_ENDED) != 0U) {
return -ENOTSUP;
}
/* Can't do I2C bus operations from an ISR */
if (k_is_in_isr()) {
return -EWOULDBLOCK;
}
k_sem_take(&drv_data->lock, K_FOREVER);
ret = setup_pin_dir(dev, pin, flags);
if (ret) {
LOG_ERR("PCA95XX[0x%X]: error setting pin direction (%d)",
i2c_addr, ret);
goto done;
}
ret = setup_pin_pullupdown(dev, pin, flags);
if (ret) {
LOG_ERR("PCA95XX[0x%X]: error setting pin pull up/down "
"(%d)", i2c_addr, ret);
goto done;
}
done:
k_sem_give(&drv_data->lock);
return ret;
}
static int gpio_pca95xx_port_get_raw(const struct device *dev,
uint32_t *value)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
uint16_t buf;
int ret;
/* Can't do I2C bus operations from an ISR */
if (k_is_in_isr()) {
return -EWOULDBLOCK;
}
k_sem_take(&drv_data->lock, K_FOREVER);
ret = update_input_regs(dev, &buf);
if (ret != 0) {
goto done;
}
*value = buf;
done:
k_sem_give(&drv_data->lock);
return ret;
}
static int gpio_pca95xx_port_set_masked_raw(const struct device *dev,
uint32_t mask, uint32_t value)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
uint16_t reg_out;
int ret;
/* Can't do I2C bus operations from an ISR */
if (k_is_in_isr()) {
return -EWOULDBLOCK;
}
k_sem_take(&drv_data->lock, K_FOREVER);
reg_out = drv_data->reg_cache.output;
reg_out = (reg_out & ~mask) | (mask & value);
ret = update_output_regs(dev, reg_out);
k_sem_give(&drv_data->lock);
return ret;
}
static int gpio_pca95xx_port_set_bits_raw(const struct device *dev,
uint32_t mask)
{
return gpio_pca95xx_port_set_masked_raw(dev, mask, mask);
}
static int gpio_pca95xx_port_clear_bits_raw(const struct device *dev,
uint32_t mask)
{
return gpio_pca95xx_port_set_masked_raw(dev, mask, 0);
}
static int gpio_pca95xx_port_toggle_bits(const struct device *dev,
uint32_t mask)
{
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
uint16_t reg_out;
int ret;
/* Can't do I2C bus operations from an ISR */
if (k_is_in_isr()) {
return -EWOULDBLOCK;
}
k_sem_take(&drv_data->lock, K_FOREVER);
reg_out = drv_data->reg_cache.output;
reg_out ^= mask;
ret = update_output_regs(dev, reg_out);
k_sem_give(&drv_data->lock);
return ret;
}
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
static void gpio_pca95xx_interrupt_worker(struct k_work *work)
{
struct gpio_pca95xx_drv_data * const drv_data = CONTAINER_OF(
work, struct gpio_pca95xx_drv_data, interrupt_worker);
uint16_t input_new, input_cache, changed_pins, trig_edge;
uint16_t trig_level = 0;
uint32_t triggered_int = 0;
int ret;
k_sem_take(&drv_data->lock, K_FOREVER);
input_cache = drv_data->reg_cache.input;
ret = update_input_regs(drv_data->instance, &input_new);
if (ret == 0) {
/* Note: PCA Interrupt status is cleared by reading inputs */
changed_pins = (input_cache ^ input_new);
trig_edge = (changed_pins & input_new &
drv_data->interrupts.edge_rising);
trig_edge |= (changed_pins & input_cache &
drv_data->interrupts.edge_falling);
trig_level = (input_new & drv_data->interrupts.level_high);
trig_level |= (~input_new & drv_data->interrupts.level_low);
triggered_int = (trig_edge | trig_level);
}
k_sem_give(&drv_data->lock);
if (triggered_int != 0) {
gpio_fire_callbacks(&drv_data->callbacks, drv_data->instance,
triggered_int);
}
/* Emulate level triggering */
if (trig_level != 0) {
/* Reschedule worker */
k_work_submit(&drv_data->interrupt_worker);
}
}
static void gpio_pca95xx_interrupt_callback(const struct device *dev,
struct gpio_callback *cb,
gpio_port_pins_t pins)
{
struct gpio_pca95xx_drv_data * const drv_data =
CONTAINER_OF(cb, struct gpio_pca95xx_drv_data, gpio_callback);
ARG_UNUSED(pins);
/* Cannot read PCA95xx registers from ISR context, queue worker */
k_work_submit(&drv_data->interrupt_worker);
}
#endif /* CONFIG_GPIO_PCA95XX_INTERRUPT */
static int gpio_pca95xx_pin_interrupt_configure(const struct device *dev,
gpio_pin_t pin,
enum gpio_int_mode mode,
enum gpio_int_trig trig)
{
int ret = 0;
if (!IS_ENABLED(CONFIG_GPIO_PCA95XX_INTERRUPT)
&& (mode != GPIO_INT_MODE_DISABLED)) {
return -ENOTSUP;
}
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
const struct gpio_pca95xx_config * const config = dev->config;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
const struct device *int_gpio_dev;
uint16_t reg;
bool enabled, edge, level, active;
/* Check if GPIO port supports interrupts */
if ((config->capabilities & PCA_HAS_INTERRUPT) == 0U) {
return -ENOTSUP;
}
/* Check for an invalid pin number */
if (BIT(pin) > config->common.port_pin_mask) {
return -EINVAL;
}
/* Check configured pin direction */
if ((mode != GPIO_INT_MODE_DISABLED) &&
(BIT(pin) & drv_data->reg_cache.dir) != BIT(pin)) {
LOG_ERR("PCA95XX[0x%X]: output pin cannot trigger interrupt",
config->i2c_slave_addr);
return -ENOTSUP;
}
k_sem_take(&drv_data->lock, K_FOREVER);
/* Update interrupt masks */
enabled = ((mode & GPIO_INT_MODE_DISABLED) == 0U);
edge = (mode == GPIO_INT_MODE_EDGE);
level = (mode == GPIO_INT_MODE_LEVEL);
WRITE_BIT(drv_data->interrupts.edge_rising, pin, (enabled &&
edge && ((trig & GPIO_INT_TRIG_HIGH) == GPIO_INT_TRIG_HIGH)));
WRITE_BIT(drv_data->interrupts.edge_falling, pin, (enabled &&
edge && ((trig & GPIO_INT_TRIG_LOW) == GPIO_INT_TRIG_LOW)));
WRITE_BIT(drv_data->interrupts.level_high, pin, (enabled &&
level && ((trig & GPIO_INT_TRIG_HIGH) == GPIO_INT_TRIG_HIGH)));
WRITE_BIT(drv_data->interrupts.level_low, pin, (enabled &&
level && ((trig & GPIO_INT_TRIG_LOW) == GPIO_INT_TRIG_LOW)));
active = ((drv_data->interrupts.edge_rising ||
drv_data->interrupts.edge_falling ||
drv_data->interrupts.level_high ||
drv_data->interrupts.level_low) > 0);
/* Enable / disable interrupt as needed */
if (active != drv_data->interrupt_active) {
int_gpio_dev = device_get_binding(config->int_gpio_port);
ret = gpio_pin_interrupt_configure(int_gpio_dev,
config->int_gpio_pin, (active ?
GPIO_INT_EDGE_TO_ACTIVE :
GPIO_INT_MODE_DISABLED));
if (ret != 0) {
LOG_ERR("PCA95XX[0x%X]: failed to configure interrupt "
"on pin %d (%d)", config->i2c_slave_addr,
config->int_gpio_pin, ret);
goto err;
}
drv_data->interrupt_active = active;
if (active) {
/* Read current status to reset any
* active signal on INT line
*/
update_input_regs(dev, &reg);
}
}
err:
k_sem_give(&drv_data->lock);
#endif /* CONFIG_GPIO_PCA95XX_INTERRUPT */
return ret;
}
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
static int gpio_pca95xx_manage_callback(const struct device *dev,
struct gpio_callback *callback,
bool set)
{
const struct gpio_pca95xx_config * const config = dev->config;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
if ((config->capabilities & PCA_HAS_INTERRUPT) == 0U) {
return -ENOTSUP;
}
k_sem_take(&drv_data->lock, K_FOREVER);
gpio_manage_callback(&drv_data->callbacks, callback, set);
k_sem_give(&drv_data->lock);
return 0;
}
#endif
static const struct gpio_driver_api gpio_pca95xx_drv_api_funcs = {
.pin_configure = gpio_pca95xx_config,
.port_get_raw = gpio_pca95xx_port_get_raw,
.port_set_masked_raw = gpio_pca95xx_port_set_masked_raw,
.port_set_bits_raw = gpio_pca95xx_port_set_bits_raw,
.port_clear_bits_raw = gpio_pca95xx_port_clear_bits_raw,
.port_toggle_bits = gpio_pca95xx_port_toggle_bits,
.pin_interrupt_configure = gpio_pca95xx_pin_interrupt_configure,
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
.manage_callback = gpio_pca95xx_manage_callback,
#endif
};
/**
* @brief Initialization function of PCA95XX
*
* @param dev Device struct
* @return 0 if successful, failed otherwise.
*/
static int gpio_pca95xx_init(const struct device *dev)
{
const struct gpio_pca95xx_config * const config = dev->config;
struct gpio_pca95xx_drv_data * const drv_data =
(struct gpio_pca95xx_drv_data * const)dev->data;
const struct device *i2c_master;
/* Find out the device struct of the I2C master */
i2c_master = device_get_binding((char *)config->i2c_master_dev_name);
if (!i2c_master) {
return -EINVAL;
}
drv_data->i2c_master = i2c_master;
k_sem_init(&drv_data->lock, 1, 1);
#ifdef CONFIG_GPIO_PCA95XX_INTERRUPT
/* Check if GPIO port supports interrupts */
if ((config->capabilities & PCA_HAS_INTERRUPT) != 0) {
const struct device *int_gpio_dev;
int ret;
/* Store self-reference for interrupt handling */
drv_data->instance = dev;
/* Prepare interrupt worker */
k_work_init(&drv_data->interrupt_worker,
gpio_pca95xx_interrupt_worker);
/* Configure GPIO interrupt pin */
int_gpio_dev = device_get_binding(config->int_gpio_port);
if (int_gpio_dev == NULL) {
LOG_ERR("PCA95XX[0x%X]: error getting interrupt GPIO"
" device (%s)", config->i2c_slave_addr,
config->int_gpio_port);
return -ENODEV;
}
ret = gpio_pin_configure(int_gpio_dev, config->int_gpio_pin,
(config->int_gpio_flags | GPIO_INPUT));
if (ret != 0) {
LOG_ERR("PCA95XX[0x%X]: failed to configure interrupt"
" pin %d (%d)", config->i2c_slave_addr,
config->int_gpio_pin, ret);
return ret;
}
/* Prepare GPIO callback for interrupt pin */
gpio_init_callback(&drv_data->gpio_callback,
gpio_pca95xx_interrupt_callback,
BIT(config->int_gpio_pin));
gpio_add_callback(int_gpio_dev, &drv_data->gpio_callback);
}
#endif
return 0;
}
#define GPIO_PCA95XX_DEVICE_INSTANCE(inst) \
static const struct gpio_pca95xx_config gpio_pca95xx_##inst##_cfg = { \
.common = { \
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(inst), \
}, \
.i2c_master_dev_name = DT_INST_BUS_LABEL(inst), \
.i2c_slave_addr = DT_INST_REG_ADDR(inst), \
.capabilities = \
(DT_INST_PROP(inst, has_pud) ? \
PCA_HAS_PUD : 0) | \
IF_ENABLED(CONFIG_GPIO_PCA95XX_INTERRUPT, ( \
(DT_INST_NODE_HAS_PROP(inst, interrupt_gpios) ? \
PCA_HAS_INTERRUPT : 0) | \
)) \
0, \
IF_ENABLED(CONFIG_GPIO_PCA95XX_INTERRUPT, ( \
IF_ENABLED(DT_INST_NODE_HAS_PROP(inst, interrupt_gpios), ( \
.int_gpio_port = DT_INST_GPIO_LABEL(inst, interrupt_gpios), \
.int_gpio_pin = DT_INST_GPIO_PIN(inst, interrupt_gpios), \
.int_gpio_flags = DT_INST_GPIO_FLAGS(inst, interrupt_gpios), \
)))) \
}; \
\
static struct gpio_pca95xx_drv_data gpio_pca95xx_##inst##_drvdata = { \
.reg_cache.input = 0x0, \
.reg_cache.output = 0xFFFF, \
.reg_cache.dir = 0xFFFF, \
.reg_cache.pud_en = 0x0, \
.reg_cache.pud_sel = 0xFFFF, \
IF_ENABLED(CONFIG_GPIO_PCA95XX_INTERRUPT, ( \
.interrupt_active = false, \
)) \
}; \
\
DEVICE_DT_INST_DEFINE(inst, \
gpio_pca95xx_init, \
NULL, \
&gpio_pca95xx_##inst##_drvdata, \
&gpio_pca95xx_##inst##_cfg, \
POST_KERNEL, CONFIG_GPIO_PCA95XX_INIT_PRIORITY, \
&gpio_pca95xx_drv_api_funcs);
DT_INST_FOREACH_STATUS_OKAY(GPIO_PCA95XX_DEVICE_INSTANCE)