blob: ec843328b9c6ceacc54a8ae8bcd7bbac25d8f45a [file] [log] [blame]
/*
* Copyright (c) 2019-2020 Nordic Semiconductor ASA
* Copyright (c) 2019 Piotr Mienkowski
* Copyright (c) 2017 ARM Ltd
* Copyright (c) 2015-2016 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief Public APIs for GPIO drivers
*/
#ifndef ZEPHYR_INCLUDE_DRIVERS_GPIO_H_
#define ZEPHYR_INCLUDE_DRIVERS_GPIO_H_
#include <sys/__assert.h>
#include <sys/slist.h>
#include <zephyr/types.h>
#include <stddef.h>
#include <device.h>
#include <dt-bindings/gpio/gpio.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief GPIO Driver APIs
* @defgroup gpio_interface GPIO Driver APIs
* @ingroup io_interfaces
* @{
*/
/**
* @name GPIO input/output configuration flags
* @{
*/
/** Enables pin as input. */
#define GPIO_INPUT (1U << 8)
/** Enables pin as output, no change to the output state. */
#define GPIO_OUTPUT (1U << 9)
/** Disables pin for both input and output. */
#define GPIO_DISCONNECTED 0
/** @cond INTERNAL_HIDDEN */
/* Initializes output to a low state. */
#define GPIO_OUTPUT_INIT_LOW (1U << 10)
/* Initializes output to a high state. */
#define GPIO_OUTPUT_INIT_HIGH (1U << 11)
/* Initializes output based on logic level */
#define GPIO_OUTPUT_INIT_LOGICAL (1U << 12)
/** @endcond */
/** Configures GPIO pin as output and initializes it to a low state. */
#define GPIO_OUTPUT_LOW (GPIO_OUTPUT | GPIO_OUTPUT_INIT_LOW)
/** Configures GPIO pin as output and initializes it to a high state. */
#define GPIO_OUTPUT_HIGH (GPIO_OUTPUT | GPIO_OUTPUT_INIT_HIGH)
/** Configures GPIO pin as output and initializes it to a logic 0. */
#define GPIO_OUTPUT_INACTIVE (GPIO_OUTPUT | \
GPIO_OUTPUT_INIT_LOW | \
GPIO_OUTPUT_INIT_LOGICAL)
/** Configures GPIO pin as output and initializes it to a logic 1. */
#define GPIO_OUTPUT_ACTIVE (GPIO_OUTPUT | \
GPIO_OUTPUT_INIT_HIGH | \
GPIO_OUTPUT_INIT_LOGICAL)
/** @} */
/**
* @name GPIO interrupt configuration flags
* The `GPIO_INT_*` flags are used to specify how input GPIO pins will trigger
* interrupts. The interrupts can be sensitive to pin physical or logical level.
* Interrupts sensitive to pin logical level take into account GPIO_ACTIVE_LOW
* flag. If a pin was configured as Active Low, physical level low will be
* considered as logical level 1 (an active state), physical level high will
* be considered as logical level 0 (an inactive state).
* @{
*/
/** Disables GPIO pin interrupt. */
#define GPIO_INT_DISABLE (1U << 13)
/** @cond INTERNAL_HIDDEN */
/* Enables GPIO pin interrupt. */
#define GPIO_INT_ENABLE (1U << 14)
/* GPIO interrupt is sensitive to logical levels.
*
* This is a component flag that should be combined with other
* `GPIO_INT_*` flags to produce a meaningful configuration.
*/
#define GPIO_INT_LEVELS_LOGICAL (1U << 15)
/* GPIO interrupt is edge sensitive.
*
* Note: by default interrupts are level sensitive.
*
* This is a component flag that should be combined with other
* `GPIO_INT_*` flags to produce a meaningful configuration.
*/
#define GPIO_INT_EDGE (1U << 16)
/* Trigger detection when input state is (or transitions to) physical low or
* logical 0 level.
*
* This is a component flag that should be combined with other
* `GPIO_INT_*` flags to produce a meaningful configuration.
*/
#define GPIO_INT_LOW_0 (1U << 17)
/* Trigger detection on input state is (or transitions to) physical high or
* logical 1 level.
*
* This is a component flag that should be combined with other
* `GPIO_INT_*` flags to produce a meaningful configuration.
*/
#define GPIO_INT_HIGH_1 (1U << 18)
#define GPIO_INT_MASK (GPIO_INT_DISABLE | \
GPIO_INT_ENABLE | \
GPIO_INT_LEVELS_LOGICAL | \
GPIO_INT_EDGE | \
GPIO_INT_LOW_0 | \
GPIO_INT_HIGH_1)
/** @endcond */
/** Configures GPIO interrupt to be triggered on pin rising edge and enables it.
*/
#define GPIO_INT_EDGE_RISING (GPIO_INT_ENABLE | \
GPIO_INT_EDGE | \
GPIO_INT_HIGH_1)
/** Configures GPIO interrupt to be triggered on pin falling edge and enables
* it.
*/
#define GPIO_INT_EDGE_FALLING (GPIO_INT_ENABLE | \
GPIO_INT_EDGE | \
GPIO_INT_LOW_0)
/** Configures GPIO interrupt to be triggered on pin rising or falling edge and
* enables it.
*/
#define GPIO_INT_EDGE_BOTH (GPIO_INT_ENABLE | \
GPIO_INT_EDGE | \
GPIO_INT_LOW_0 | \
GPIO_INT_HIGH_1)
/** Configures GPIO interrupt to be triggered on pin physical level low and
* enables it.
*/
#define GPIO_INT_LEVEL_LOW (GPIO_INT_ENABLE | \
GPIO_INT_LOW_0)
/** Configures GPIO interrupt to be triggered on pin physical level high and
* enables it.
*/
#define GPIO_INT_LEVEL_HIGH (GPIO_INT_ENABLE | \
GPIO_INT_HIGH_1)
/** Configures GPIO interrupt to be triggered on pin state change to logical
* level 0 and enables it.
*/
#define GPIO_INT_EDGE_TO_INACTIVE (GPIO_INT_ENABLE | \
GPIO_INT_LEVELS_LOGICAL | \
GPIO_INT_EDGE | \
GPIO_INT_LOW_0)
/** Configures GPIO interrupt to be triggered on pin state change to logical
* level 1 and enables it.
*/
#define GPIO_INT_EDGE_TO_ACTIVE (GPIO_INT_ENABLE | \
GPIO_INT_LEVELS_LOGICAL | \
GPIO_INT_EDGE | \
GPIO_INT_HIGH_1)
/** Configures GPIO interrupt to be triggered on pin logical level 0 and enables
* it.
*/
#define GPIO_INT_LEVEL_INACTIVE (GPIO_INT_ENABLE | \
GPIO_INT_LEVELS_LOGICAL | \
GPIO_INT_LOW_0)
/** Configures GPIO interrupt to be triggered on pin logical level 1 and enables
* it.
*/
#define GPIO_INT_LEVEL_ACTIVE (GPIO_INT_ENABLE | \
GPIO_INT_LEVELS_LOGICAL | \
GPIO_INT_HIGH_1)
/** @} */
/** Enable GPIO pin debounce.
*
* @note Drivers that do not support a debounce feature should ignore
* this flag rather than rejecting the configuration with -ENOTSUP.
*/
#define GPIO_INT_DEBOUNCE (1U << 19)
/**
* @name GPIO drive strength flags
* The `GPIO_DS_*` flags are used with `gpio_pin_configure` to specify the drive
* strength configuration of a GPIO pin.
*
* The drive strength of individual pins can be configured
* independently for when the pin output is low and high.
*
* The `GPIO_DS_*_LOW` enumerations define the drive strength of a pin
* when output is low.
* The `GPIO_DS_*_HIGH` enumerations define the drive strength of a pin
* when output is high.
*
* The interface supports two different drive strengths:
* `DFLT` - The lowest drive strength supported by the HW
* `ALT` - The highest drive strength supported by the HW
*
* On hardware that supports only one standard drive strength, both
* `DFLT` and `ALT` have the same behavior.
* @{
*/
/** @cond INTERNAL_HIDDEN */
#define GPIO_DS_LOW_POS 20
#define GPIO_DS_LOW_MASK (0x3U << GPIO_DS_LOW_POS)
/** @endcond */
/** Default drive strength standard when GPIO pin output is low.
*/
#define GPIO_DS_DFLT_LOW (0x0U << GPIO_DS_LOW_POS)
/** Alternative drive strength when GPIO pin output is low.
* For hardware that does not support configurable drive strength
* use the default drive strength.
*/
#define GPIO_DS_ALT_LOW (0x1U << GPIO_DS_LOW_POS)
/** @cond INTERNAL_HIDDEN */
#define GPIO_DS_HIGH_POS 22
#define GPIO_DS_HIGH_MASK (0x3U << GPIO_DS_HIGH_POS)
/** @endcond */
/** Default drive strength when GPIO pin output is high.
*/
#define GPIO_DS_DFLT_HIGH (0x0U << GPIO_DS_HIGH_POS)
/** Alternative drive strength when GPIO pin output is high.
* For hardware that does not support configurable drive strengths
* use the default drive strength.
*/
#define GPIO_DS_ALT_HIGH (0x1U << GPIO_DS_HIGH_POS)
/** Combined default drive strength.
*/
#define GPIO_DS_DFLT (GPIO_DS_DFLT_LOW | GPIO_DS_DFLT_HIGH)
/** Combined alternative drive strength.
*/
#define GPIO_DS_ALT (GPIO_DS_ALT_LOW | GPIO_DS_ALT_HIGH)
/** @cond INTERNAL_HIDDEN */
#define GPIO_DS_MASK (GPIO_DS_LOW_MASK | GPIO_DS_HIGH_MASK)
/** @endcond */
/** @} */
/** @cond INTERNAL_HIDDEN */
#define GPIO_DIR_MASK (GPIO_INPUT | GPIO_OUTPUT)
/** @endcond */
/**
* @brief Identifies a set of pins associated with a port.
*
* The pin with index n is present in the set if and only if the bit
* identified by (1U << n) is set.
*/
typedef uint32_t gpio_port_pins_t;
/**
* @brief Provides values for a set of pins associated with a port.
*
* The value for a pin with index n is high (physical mode) or active
* (logical mode) if and only if the bit identified by (1U << n) is set.
* Otherwise the value for the pin is low (physical mode) or inactive
* (logical mode).
*
* Values of this type are often paired with a `gpio_port_pins_t` value
* that specifies which encoded pin values are valid for the operation.
*/
typedef uint32_t gpio_port_value_t;
/**
* @brief Provides a type to hold a GPIO pin index.
*
* This reduced-size type is sufficient to record a pin number,
* e.g. from a devicetree GPIOS property.
*/
typedef uint8_t gpio_pin_t;
/**
* @brief Provides a type to hold GPIO devicetree flags.
*
* All GPIO flags that can be expressed in devicetree fit in the low 8
* bits of the full flags field, so use a reduced-size type to record
* that part of a GPIOS property.
*/
typedef uint8_t gpio_dt_flags_t;
/**
* @brief Provides a type to hold GPIO configuration flags.
*
* This type is sufficient to hold all flags used to control GPIO
* configuration, whether pin or interrupt.
*/
typedef uint32_t gpio_flags_t;
/**
* @brief Container for GPIO pin information specified in devicetree
*
* This type contains a pointer to a GPIO device, pin number for a pin
* controlled by that device, and the subset of pin configuration
* flags which may be given in devicetree.
*
* @see GPIO_DT_SPEC_GET_BY_IDX
* @see GPIO_DT_SPEC_GET_BY_IDX_OR
* @see GPIO_DT_SPEC_GET
* @see GPIO_DT_SPEC_GET_OR
*/
struct gpio_dt_spec {
/** GPIO device controlling the pin */
const struct device *port;
/** The pin's number on the device */
gpio_pin_t pin;
/** The pin's configuration flags as specified in devicetree */
gpio_dt_flags_t dt_flags;
};
/**
* @brief Static initializer for a @p gpio_dt_spec
*
* This returns a static initializer for a @p gpio_dt_spec structure given a
* devicetree node identifier, a property specifying a GPIO and an index.
*
* Example devicetree fragment:
*
* n: node {
* foo-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>,
* <&gpio1 2 GPIO_ACTIVE_LOW>;
* }
*
* Example usage:
*
* const struct gpio_dt_spec spec = GPIO_DT_SPEC_GET_BY_IDX(DT_NODELABEL(n),
* foo_gpios, 1);
* // Initializes 'spec' to:
* // {
* // .port = DEVICE_DT_GET(DT_NODELABEL(gpio1)),
* // .pin = 2,
* // .dt_flags = GPIO_ACTIVE_LOW
* // }
*
* The 'gpio' field must still be checked for readiness, e.g. using
* device_is_ready(). It is an error to use this macro unless the node
* exists, has the given property, and that property specifies a GPIO
* controller, pin number, and flags as shown above.
*
* @param node_id devicetree node identifier
* @param prop lowercase-and-underscores property name
* @param idx logical index into "prop"
* @return static initializer for a struct gpio_dt_spec for the property
*/
#define GPIO_DT_SPEC_GET_BY_IDX(node_id, prop, idx) \
{ \
.port = DEVICE_DT_GET(DT_GPIO_CTLR_BY_IDX(node_id, prop, idx)),\
.pin = DT_GPIO_PIN_BY_IDX(node_id, prop, idx), \
.dt_flags = DT_GPIO_FLAGS_BY_IDX(node_id, prop, idx), \
}
/**
* @brief Like GPIO_DT_SPEC_GET_BY_IDX(), with a fallback to a default value
*
* If the devicetree node identifier 'node_id' refers to a node with a
* property 'prop', this expands to
* <tt>GPIO_DT_SPEC_GET_BY_IDX(node_id, prop, idx)</tt>. The @p
* default_value parameter is not expanded in this case.
*
* Otherwise, this expands to @p default_value.
*
* @param node_id devicetree node identifier
* @param prop lowercase-and-underscores property name
* @param idx logical index into "prop"
* @param default_value fallback value to expand to
* @return static initializer for a struct gpio_dt_spec for the property,
* or default_value if the node or property do not exist
*/
#define GPIO_DT_SPEC_GET_BY_IDX_OR(node_id, prop, idx, default_value) \
COND_CODE_1(DT_NODE_HAS_PROP(node_id, prop), \
(GPIO_DT_SPEC_GET_BY_IDX(node_id, prop, idx)), \
(default_value))
/**
* @brief Equivalent to GPIO_DT_SPEC_GET_BY_IDX(node_id, prop, 0).
*
* @param node_id devicetree node identifier
* @param prop lowercase-and-underscores property name
* @return static initializer for a struct gpio_dt_spec for the property
* @see GPIO_DT_SPEC_GET_BY_IDX()
*/
#define GPIO_DT_SPEC_GET(node_id, prop) \
GPIO_DT_SPEC_GET_BY_IDX(node_id, prop, 0)
/**
* @brief Equivalent to
* GPIO_DT_SPEC_GET_BY_IDX_OR(node_id, prop, 0, default_value).
*
* @param node_id devicetree node identifier
* @param prop lowercase-and-underscores property name
* @param default_value fallback value to expand to
* @return static initializer for a struct gpio_dt_spec for the property
* @see GPIO_DT_SPEC_GET_BY_IDX_OR()
*/
#define GPIO_DT_SPEC_GET_OR(node_id, prop, default_value) \
GPIO_DT_SPEC_GET_BY_IDX_OR(node_id, prop, 0, default_value)
/**
* @brief Static initializer for a @p gpio_dt_spec from a DT_DRV_COMPAT
* instance's GPIO property at an index.
*
* @param inst DT_DRV_COMPAT instance number
* @param prop lowercase-and-underscores property name
* @param idx logical index into "prop"
* @return static initializer for a struct gpio_dt_spec for the property
* @see GPIO_DT_SPEC_GET_BY_IDX()
*/
#define GPIO_DT_SPEC_INST_GET_BY_IDX(inst, prop, idx) \
GPIO_DT_SPEC_GET_BY_IDX(DT_DRV_INST(inst), prop, idx)
/**
* @brief Static initializer for a @p gpio_dt_spec from a DT_DRV_COMPAT
* instance's GPIO property at an index, with fallback
*
* @param inst DT_DRV_COMPAT instance number
* @param prop lowercase-and-underscores property name
* @param idx logical index into "prop"
* @param default_value fallback value to expand to
* @return static initializer for a struct gpio_dt_spec for the property
* @see GPIO_DT_SPEC_GET_BY_IDX()
*/
#define GPIO_DT_SPEC_INST_GET_BY_IDX_OR(inst, prop, idx, default_value) \
GPIO_DT_SPEC_GET_BY_IDX_OR(DT_DRV_INST(inst), prop, idx, default_value)
/**
* @brief Equivalent to GPIO_DT_SPEC_INST_GET_BY_IDX(inst, prop, 0).
*
* @param inst DT_DRV_COMPAT instance number
* @param prop lowercase-and-underscores property name
* @return static initializer for a struct gpio_dt_spec for the property
* @see GPIO_DT_SPEC_INST_GET_BY_IDX()
*/
#define GPIO_DT_SPEC_INST_GET(inst, prop) \
GPIO_DT_SPEC_INST_GET_BY_IDX(inst, prop, 0)
/**
* @brief Equivalent to
* GPIO_DT_SPEC_INST_GET_BY_IDX_OR(inst, prop, 0, default_value).
*
* @param inst DT_DRV_COMPAT instance number
* @param prop lowercase-and-underscores property name
* @param default_value fallback value to expand to
* @return static initializer for a struct gpio_dt_spec for the property
* @see GPIO_DT_SPEC_INST_GET_BY_IDX()
*/
#define GPIO_DT_SPEC_INST_GET_OR(inst, prop, default_value) \
GPIO_DT_SPEC_INST_GET_BY_IDX_OR(inst, prop, 0, default_value)
/**
* @brief Maximum number of pins that are supported by `gpio_port_pins_t`.
*/
#define GPIO_MAX_PINS_PER_PORT (sizeof(gpio_port_pins_t) * __CHAR_BIT__)
/**
* This structure is common to all GPIO drivers and is expected to be
* the first element in the object pointed to by the config field
* in the device structure.
*/
struct gpio_driver_config {
/* Mask identifying pins supported by the controller.
*
* Initialization of this mask is the responsibility of device
* instance generation in the driver.
*/
gpio_port_pins_t port_pin_mask;
};
/**
* This structure is common to all GPIO drivers and is expected to be the first
* element in the driver's struct driver_data declaration.
*/
struct gpio_driver_data {
/* Mask identifying pins that are configured as active low.
*
* Management of this mask is the responsibility of the
* wrapper functions in this header.
*/
gpio_port_pins_t invert;
};
struct gpio_callback;
/**
* @typedef gpio_callback_handler_t
* @brief Define the application callback handler function signature
*
* @param port Device struct for the GPIO device.
* @param cb Original struct gpio_callback owning this handler
* @param pins Mask of pins that triggers the callback handler
*
* Note: cb pointer can be used to retrieve private data through
* CONTAINER_OF() if original struct gpio_callback is stored in
* another private structure.
*/
typedef void (*gpio_callback_handler_t)(const struct device *port,
struct gpio_callback *cb,
gpio_port_pins_t pins);
/**
* @brief GPIO callback structure
*
* Used to register a callback in the driver instance callback list.
* As many callbacks as needed can be added as long as each of them
* are unique pointers of struct gpio_callback.
* Beware such structure should not be allocated on stack.
*
* Note: To help setting it, see gpio_init_callback() below
*/
struct gpio_callback {
/** This is meant to be used in the driver and the user should not
* mess with it (see drivers/gpio/gpio_utils.h)
*/
sys_snode_t node;
/** Actual callback function being called when relevant. */
gpio_callback_handler_t handler;
/** A mask of pins the callback is interested in, if 0 the callback
* will never be called. Such pin_mask can be modified whenever
* necessary by the owner, and thus will affect the handler being
* called or not. The selected pins must be configured to trigger
* an interrupt.
*/
gpio_port_pins_t pin_mask;
};
/**
* @cond INTERNAL_HIDDEN
*
* For internal use only, skip these in public documentation.
*/
/* Used by driver api function pin_interrupt_configure, these are defined
* in terms of the public flags so we can just mask and pass them
* through to the driver api
*/
enum gpio_int_mode {
GPIO_INT_MODE_DISABLED = GPIO_INT_DISABLE,
GPIO_INT_MODE_LEVEL = GPIO_INT_ENABLE,
GPIO_INT_MODE_EDGE = GPIO_INT_ENABLE | GPIO_INT_EDGE,
};
enum gpio_int_trig {
/* Trigger detection when input state is (or transitions to)
* physical low. (Edge Failing or Active Low) */
GPIO_INT_TRIG_LOW = GPIO_INT_LOW_0,
/* Trigger detection when input state is (or transitions to)
* physical high. (Edge Rising or Active High) */
GPIO_INT_TRIG_HIGH = GPIO_INT_HIGH_1,
/* Trigger detection on pin rising or falling edge. */
GPIO_INT_TRIG_BOTH = GPIO_INT_LOW_0 | GPIO_INT_HIGH_1,
};
__subsystem struct gpio_driver_api {
int (*pin_configure)(const struct device *port, gpio_pin_t pin,
gpio_flags_t flags);
int (*port_get_raw)(const struct device *port,
gpio_port_value_t *value);
int (*port_set_masked_raw)(const struct device *port,
gpio_port_pins_t mask,
gpio_port_value_t value);
int (*port_set_bits_raw)(const struct device *port,
gpio_port_pins_t pins);
int (*port_clear_bits_raw)(const struct device *port,
gpio_port_pins_t pins);
int (*port_toggle_bits)(const struct device *port,
gpio_port_pins_t pins);
int (*pin_interrupt_configure)(const struct device *port,
gpio_pin_t pin,
enum gpio_int_mode, enum gpio_int_trig);
int (*manage_callback)(const struct device *port,
struct gpio_callback *cb,
bool set);
uint32_t (*get_pending_int)(const struct device *dev);
};
/**
* @endcond
*/
/**
* @brief Configure pin interrupt.
*
* @note This function can also be used to configure interrupts on pins
* not controlled directly by the GPIO module. That is, pins which are
* routed to other modules such as I2C, SPI, UART.
*
* @param port Pointer to device structure for the driver instance.
* @param pin Pin number.
* @param flags Interrupt configuration flags as defined by GPIO_INT_*.
*
* @retval 0 If successful.
* @retval -ENOTSUP If any of the configuration options is not supported
* (unless otherwise directed by flag documentation).
* @retval -EINVAL Invalid argument.
* @retval -EBUSY Interrupt line required to configure pin interrupt is
* already in use.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_pin_interrupt_configure(const struct device *port,
gpio_pin_t pin,
gpio_flags_t flags);
static inline int z_impl_gpio_pin_interrupt_configure(const struct device *port,
gpio_pin_t pin,
gpio_flags_t flags)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
const struct gpio_driver_data *const data =
(const struct gpio_driver_data *)port->data;
enum gpio_int_trig trig;
enum gpio_int_mode mode;
__ASSERT_NO_MSG((flags & GPIO_INT_DEBOUNCE) == 0);
__ASSERT((flags & (GPIO_INT_DISABLE | GPIO_INT_ENABLE))
!= (GPIO_INT_DISABLE | GPIO_INT_ENABLE),
"Cannot both enable and disable interrupts");
__ASSERT((flags & (GPIO_INT_DISABLE | GPIO_INT_ENABLE)) != 0U,
"Must either enable or disable interrupts");
__ASSERT(((flags & GPIO_INT_ENABLE) == 0) ||
((flags & GPIO_INT_EDGE) != 0) ||
((flags & (GPIO_INT_LOW_0 | GPIO_INT_HIGH_1)) !=
(GPIO_INT_LOW_0 | GPIO_INT_HIGH_1)),
"Only one of GPIO_INT_LOW_0, GPIO_INT_HIGH_1 can be "
"enabled for a level interrupt.");
__ASSERT(((flags & GPIO_INT_ENABLE) == 0) ||
((flags & (GPIO_INT_LOW_0 | GPIO_INT_HIGH_1)) != 0),
"At least one of GPIO_INT_LOW_0, GPIO_INT_HIGH_1 has to be "
"enabled.");
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
if (((flags & GPIO_INT_LEVELS_LOGICAL) != 0) &&
((data->invert & (gpio_port_pins_t)BIT(pin)) != 0)) {
/* Invert signal bits */
flags ^= (GPIO_INT_LOW_0 | GPIO_INT_HIGH_1);
}
trig = (enum gpio_int_trig)(flags & (GPIO_INT_LOW_0 | GPIO_INT_HIGH_1));
mode = (enum gpio_int_mode)(flags & (GPIO_INT_EDGE | GPIO_INT_DISABLE | GPIO_INT_ENABLE));
return api->pin_interrupt_configure(port, pin, mode, trig);
}
/**
* @brief Configure pin interrupts from a @p gpio_dt_spec.
*
* This is equivalent to:
*
* gpio_pin_interrupt_configure(spec->port, spec->pin, flags);
*
* The <tt>spec->dt_flags</tt> value is not used.
*
* @param spec GPIO specification from devicetree
* @param flags interrupt configuration flags
* @return a value from gpio_pin_interrupt_configure()
*/
static inline int gpio_pin_interrupt_configure_dt(const struct gpio_dt_spec *spec,
gpio_flags_t flags)
{
return gpio_pin_interrupt_configure(spec->port, spec->pin, flags);
}
/**
* @brief Configure a single pin.
*
* @param port Pointer to device structure for the driver instance.
* @param pin Pin number to configure.
* @param flags Flags for pin configuration: 'GPIO input/output configuration
* flags', 'GPIO drive strength flags', 'GPIO pin drive flags', 'GPIO pin
* bias flags', GPIO_INT_DEBOUNCE.
*
* @retval 0 If successful.
* @retval -ENOTSUP if any of the configuration options is not supported
* (unless otherwise directed by flag documentation).
* @retval -EINVAL Invalid argument.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_pin_configure(const struct device *port,
gpio_pin_t pin,
gpio_flags_t flags);
static inline int z_impl_gpio_pin_configure(const struct device *port,
gpio_pin_t pin,
gpio_flags_t flags)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
struct gpio_driver_data *data =
(struct gpio_driver_data *)port->data;
__ASSERT((flags & GPIO_INT_MASK) == 0,
"Interrupt flags are not supported");
__ASSERT((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) !=
(GPIO_PULL_UP | GPIO_PULL_DOWN),
"Pull Up and Pull Down should not be enabled simultaneously");
__ASSERT((flags & GPIO_OUTPUT) != 0 || (flags & GPIO_SINGLE_ENDED) == 0,
"Output needs to be enabled for 'Open Drain', 'Open Source' "
"mode to be supported");
__ASSERT_NO_MSG((flags & GPIO_SINGLE_ENDED) != 0 ||
(flags & GPIO_LINE_OPEN_DRAIN) == 0);
__ASSERT((flags & (GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH)) == 0
|| (flags & GPIO_OUTPUT) != 0,
"Output needs to be enabled to be initialized low or high");
__ASSERT((flags & (GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH))
!= (GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH),
"Output cannot be initialized low and high");
if (((flags & GPIO_OUTPUT_INIT_LOGICAL) != 0)
&& ((flags & (GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH)) != 0)
&& ((flags & GPIO_ACTIVE_LOW) != 0)) {
flags ^= GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH;
}
flags &= ~GPIO_OUTPUT_INIT_LOGICAL;
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
if ((flags & GPIO_ACTIVE_LOW) != 0) {
data->invert |= (gpio_port_pins_t)BIT(pin);
} else {
data->invert &= ~(gpio_port_pins_t)BIT(pin);
}
return api->pin_configure(port, pin, flags);
}
/**
* @brief Configure a single pin from a @p gpio_dt_spec and some extra flags.
*
* This is equivalent to:
*
* gpio_pin_configure(spec->port, spec->pin, spec->dt_flags | extra_flags);
*
* @param spec GPIO specification from devicetree
* @param extra_flags additional flags
* @return a value from gpio_pin_configure()
*/
static inline int gpio_pin_configure_dt(const struct gpio_dt_spec *spec,
gpio_flags_t extra_flags)
{
return gpio_pin_configure(spec->port,
spec->pin,
spec->dt_flags | extra_flags);
}
/**
* @brief Get physical level of all input pins in a port.
*
* A low physical level on the pin will be interpreted as value 0. A high
* physical level will be interpreted as value 1. This function ignores
* GPIO_ACTIVE_LOW flag.
*
* Value of a pin with index n will be represented by bit n in the returned
* port value.
*
* @param port Pointer to the device structure for the driver instance.
* @param value Pointer to a variable where pin values will be stored.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_port_get_raw(const struct device *port,
gpio_port_value_t *value);
static inline int z_impl_gpio_port_get_raw(const struct device *port,
gpio_port_value_t *value)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
return api->port_get_raw(port, value);
}
/**
* @brief Get logical level of all input pins in a port.
*
* Get logical level of an input pin taking into account GPIO_ACTIVE_LOW flag.
* If pin is configured as Active High, a low physical level will be interpreted
* as logical value 0. If pin is configured as Active Low, a low physical level
* will be interpreted as logical value 1.
*
* Value of a pin with index n will be represented by bit n in the returned
* port value.
*
* @param port Pointer to the device structure for the driver instance.
* @param value Pointer to a variable where pin values will be stored.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_port_get(const struct device *port,
gpio_port_value_t *value)
{
const struct gpio_driver_data *const data =
(const struct gpio_driver_data *)port->data;
int ret;
ret = gpio_port_get_raw(port, value);
if (ret == 0) {
*value ^= data->invert;
}
return ret;
}
/**
* @brief Set physical level of output pins in a port.
*
* Writing value 0 to the pin will set it to a low physical level. Writing
* value 1 will set it to a high physical level. This function ignores
* GPIO_ACTIVE_LOW flag.
*
* Pin with index n is represented by bit n in mask and value parameter.
*
* @param port Pointer to the device structure for the driver instance.
* @param mask Mask indicating which pins will be modified.
* @param value Value assigned to the output pins.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_port_set_masked_raw(const struct device *port,
gpio_port_pins_t mask,
gpio_port_value_t value);
static inline int z_impl_gpio_port_set_masked_raw(const struct device *port,
gpio_port_pins_t mask,
gpio_port_value_t value)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
return api->port_set_masked_raw(port, mask, value);
}
/**
* @brief Set logical level of output pins in a port.
*
* Set logical level of an output pin taking into account GPIO_ACTIVE_LOW flag.
* Value 0 sets the pin in logical 0 / inactive state. Value 1 sets the pin in
* logical 1 / active state. If pin is configured as Active High, the default,
* setting it in inactive state will force the pin to a low physical level. If
* pin is configured as Active Low, setting it in inactive state will force the
* pin to a high physical level.
*
* Pin with index n is represented by bit n in mask and value parameter.
*
* @param port Pointer to the device structure for the driver instance.
* @param mask Mask indicating which pins will be modified.
* @param value Value assigned to the output pins.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_port_set_masked(const struct device *port,
gpio_port_pins_t mask,
gpio_port_value_t value)
{
const struct gpio_driver_data *const data =
(const struct gpio_driver_data *)port->data;
value ^= data->invert;
return gpio_port_set_masked_raw(port, mask, value);
}
/**
* @brief Set physical level of selected output pins to high.
*
* @param port Pointer to the device structure for the driver instance.
* @param pins Value indicating which pins will be modified.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_port_set_bits_raw(const struct device *port,
gpio_port_pins_t pins);
static inline int z_impl_gpio_port_set_bits_raw(const struct device *port,
gpio_port_pins_t pins)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
return api->port_set_bits_raw(port, pins);
}
/**
* @brief Set logical level of selected output pins to active.
*
* @param port Pointer to the device structure for the driver instance.
* @param pins Value indicating which pins will be modified.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_port_set_bits(const struct device *port,
gpio_port_pins_t pins)
{
return gpio_port_set_masked(port, pins, pins);
}
/**
* @brief Set physical level of selected output pins to low.
*
* @param port Pointer to the device structure for the driver instance.
* @param pins Value indicating which pins will be modified.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_port_clear_bits_raw(const struct device *port,
gpio_port_pins_t pins);
static inline int z_impl_gpio_port_clear_bits_raw(const struct device *port,
gpio_port_pins_t pins)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
return api->port_clear_bits_raw(port, pins);
}
/**
* @brief Set logical level of selected output pins to inactive.
*
* @param port Pointer to the device structure for the driver instance.
* @param pins Value indicating which pins will be modified.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_port_clear_bits(const struct device *port,
gpio_port_pins_t pins)
{
return gpio_port_set_masked(port, pins, 0);
}
/**
* @brief Toggle level of selected output pins.
*
* @param port Pointer to the device structure for the driver instance.
* @param pins Value indicating which pins will be modified.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
__syscall int gpio_port_toggle_bits(const struct device *port,
gpio_port_pins_t pins);
static inline int z_impl_gpio_port_toggle_bits(const struct device *port,
gpio_port_pins_t pins)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
return api->port_toggle_bits(port, pins);
}
/**
* @brief Set physical level of selected output pins.
*
* @param port Pointer to the device structure for the driver instance.
* @param set_pins Value indicating which pins will be set to high.
* @param clear_pins Value indicating which pins will be set to low.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_port_set_clr_bits_raw(const struct device *port,
gpio_port_pins_t set_pins,
gpio_port_pins_t clear_pins)
{
__ASSERT((set_pins & clear_pins) == 0, "Set and Clear pins overlap");
return gpio_port_set_masked_raw(port, set_pins | clear_pins, set_pins);
}
/**
* @brief Set logical level of selected output pins.
*
* @param port Pointer to the device structure for the driver instance.
* @param set_pins Value indicating which pins will be set to active.
* @param clear_pins Value indicating which pins will be set to inactive.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_port_set_clr_bits(const struct device *port,
gpio_port_pins_t set_pins,
gpio_port_pins_t clear_pins)
{
__ASSERT((set_pins & clear_pins) == 0, "Set and Clear pins overlap");
return gpio_port_set_masked(port, set_pins | clear_pins, set_pins);
}
/**
* @brief Get physical level of an input pin.
*
* A low physical level on the pin will be interpreted as value 0. A high
* physical level will be interpreted as value 1. This function ignores
* GPIO_ACTIVE_LOW flag.
*
* @param port Pointer to the device structure for the driver instance.
* @param pin Pin number.
*
* @retval 1 If pin physical level is high.
* @retval 0 If pin physical level is low.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_pin_get_raw(const struct device *port, gpio_pin_t pin)
{
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
gpio_port_value_t value;
int ret;
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
ret = gpio_port_get_raw(port, &value);
if (ret == 0) {
ret = (value & (gpio_port_pins_t)BIT(pin)) != 0 ? 1 : 0;
}
return ret;
}
/**
* @brief Get logical level of an input pin.
*
* Get logical level of an input pin taking into account GPIO_ACTIVE_LOW flag.
* If pin is configured as Active High, a low physical level will be interpreted
* as logical value 0. If pin is configured as Active Low, a low physical level
* will be interpreted as logical value 1.
*
* Note: If pin is configured as Active High, the default, gpio_pin_get()
* function is equivalent to gpio_pin_get_raw().
*
* @param port Pointer to the device structure for the driver instance.
* @param pin Pin number.
*
* @retval 1 If pin logical value is 1 / active.
* @retval 0 If pin logical value is 0 / inactive.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_pin_get(const struct device *port, gpio_pin_t pin)
{
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
gpio_port_value_t value;
int ret;
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
ret = gpio_port_get(port, &value);
if (ret == 0) {
ret = (value & (gpio_port_pins_t)BIT(pin)) != 0 ? 1 : 0;
}
return ret;
}
/**
* @brief Get logical level of an input pin from a @p gpio_dt_spec.
*
* This is equivalent to:
*
* gpio_pin_get(spec->port, spec->pin);
*
* @param spec GPIO specification from devicetree
* @return a value from gpio_pin_get()
*/
static inline int gpio_pin_get_dt(const struct gpio_dt_spec *spec)
{
return gpio_pin_get(spec->port, spec->pin);
}
/**
* @brief Set physical level of an output pin.
*
* Writing value 0 to the pin will set it to a low physical level. Writing any
* value other than 0 will set it to a high physical level. This function
* ignores GPIO_ACTIVE_LOW flag.
*
* @param port Pointer to the device structure for the driver instance.
* @param pin Pin number.
* @param value Value assigned to the pin.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_pin_set_raw(const struct device *port, gpio_pin_t pin,
int value)
{
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
int ret;
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
if (value != 0) {
ret = gpio_port_set_bits_raw(port, (gpio_port_pins_t)BIT(pin));
} else {
ret = gpio_port_clear_bits_raw(port, (gpio_port_pins_t)BIT(pin));
}
return ret;
}
/**
* @brief Set logical level of an output pin.
*
* Set logical level of an output pin taking into account GPIO_ACTIVE_LOW flag.
* Value 0 sets the pin in logical 0 / inactive state. Any value other than 0
* sets the pin in logical 1 / active state. If pin is configured as Active
* High, the default, setting it in inactive state will force the pin to a low
* physical level. If pin is configured as Active Low, setting it in inactive
* state will force the pin to a high physical level.
*
* Note: If pin is configured as Active High, gpio_pin_set() function is
* equivalent to gpio_pin_set_raw().
*
* @param port Pointer to the device structure for the driver instance.
* @param pin Pin number.
* @param value Value assigned to the pin.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_pin_set(const struct device *port, gpio_pin_t pin,
int value)
{
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
const struct gpio_driver_data *const data =
(const struct gpio_driver_data *)port->data;
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
if (data->invert & (gpio_port_pins_t)BIT(pin)) {
value = (value != 0) ? 0 : 1;
}
return gpio_pin_set_raw(port, pin, value);
}
/**
* @brief Set logical level of a output pin from a @p gpio_dt_spec.
*
* This is equivalent to:
*
* gpio_pin_set(spec->port, spec->pin, value);
*
* @param spec GPIO specification from devicetree
* @param value Value assigned to the pin.
* @return a value from gpio_pin_set()
*/
static inline int gpio_pin_set_dt(const struct gpio_dt_spec *spec, int value)
{
return gpio_pin_set(spec->port, spec->pin, value);
}
/**
* @brief Toggle pin level.
*
* @param port Pointer to the device structure for the driver instance.
* @param pin Pin number.
*
* @retval 0 If successful.
* @retval -EIO I/O error when accessing an external GPIO chip.
* @retval -EWOULDBLOCK if operation would block.
*/
static inline int gpio_pin_toggle(const struct device *port, gpio_pin_t pin)
{
const struct gpio_driver_config *const cfg =
(const struct gpio_driver_config *)port->config;
(void)cfg;
__ASSERT((cfg->port_pin_mask & (gpio_port_pins_t)BIT(pin)) != 0U,
"Unsupported pin");
return gpio_port_toggle_bits(port, (gpio_port_pins_t)BIT(pin));
}
/**
* @brief Toggle pin level from a @p gpio_dt_spec.
*
* This is equivalent to:
*
* gpio_pin_toggle(spec->port, spec->pin);
*
* @param spec GPIO specification from devicetree
* @return a value from gpio_pin_toggle()
*/
static inline int gpio_pin_toggle_dt(const struct gpio_dt_spec *spec)
{
return gpio_pin_toggle(spec->port, spec->pin);
}
/**
* @brief Helper to initialize a struct gpio_callback properly
* @param callback A valid Application's callback structure pointer.
* @param handler A valid handler function pointer.
* @param pin_mask A bit mask of relevant pins for the handler
*/
static inline void gpio_init_callback(struct gpio_callback *callback,
gpio_callback_handler_t handler,
gpio_port_pins_t pin_mask)
{
__ASSERT(callback, "Callback pointer should not be NULL");
__ASSERT(handler, "Callback handler pointer should not be NULL");
callback->handler = handler;
callback->pin_mask = pin_mask;
}
/**
* @brief Add an application callback.
* @param port Pointer to the device structure for the driver instance.
* @param callback A valid Application's callback structure pointer.
* @return 0 if successful, negative errno code on failure.
*
* @note Callbacks may be added to the device from within a callback
* handler invocation, but whether they are invoked for the current
* GPIO event is not specified.
*
* Note: enables to add as many callback as needed on the same port.
*/
static inline int gpio_add_callback(const struct device *port,
struct gpio_callback *callback)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
if (api->manage_callback == NULL) {
return -ENOTSUP;
}
return api->manage_callback(port, callback, true);
}
/**
* @brief Remove an application callback.
* @param port Pointer to the device structure for the driver instance.
* @param callback A valid application's callback structure pointer.
* @return 0 if successful, negative errno code on failure.
*
* @warning It is explicitly permitted, within a callback handler, to
* remove the registration for the callback that is running, i.e. @p
* callback. Attempts to remove other registrations on the same
* device may result in undefined behavior, including failure to
* invoke callbacks that remain registered and unintended invocation
* of removed callbacks.
*
* Note: enables to remove as many callbacks as added through
* gpio_add_callback().
*/
static inline int gpio_remove_callback(const struct device *port,
struct gpio_callback *callback)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)port->api;
if (api->manage_callback == NULL) {
return -ENOTSUP;
}
return api->manage_callback(port, callback, false);
}
/**
* @brief Function to get pending interrupts
*
* The purpose of this function is to return the interrupt
* status register for the device.
* This is especially useful when waking up from
* low power states to check the wake up source.
*
* @param dev Pointer to the device structure for the driver instance.
*
* @retval status != 0 if at least one gpio interrupt is pending.
* @retval 0 if no gpio interrupt is pending.
*/
__syscall int gpio_get_pending_int(const struct device *dev);
static inline int z_impl_gpio_get_pending_int(const struct device *dev)
{
const struct gpio_driver_api *api =
(const struct gpio_driver_api *)dev->api;
if (api->get_pending_int == NULL) {
return -ENOTSUP;
}
return api->get_pending_int(dev);
}
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#include <syscalls/gpio.h>
#endif /* ZEPHYR_INCLUDE_DRIVERS_GPIO_H_ */