samples/drivers/fpga/fpga_controller/README.md - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 # Zephyr FPGA controller
 This module is an FPGA driver that can easily load a bitstream, reset it, check its status, enable or disable the FPGA.
 This sample demonstrates how to use the FPGA driver API.
 Currently the sample works with [Quicklogic Quickfeather board](https://github.com/QuickLogic-Corp/quick-feather-dev-board).

 ## Requirements
 * Zephyr RTOS
 * [Quicklogic Quickfeather board](https://github.com/QuickLogic-Corp/quick-feather-dev-board)

 ## Building

 For the QuickLogic QuickFeather board:
 ```bash
 west build -b quick_feather samples/drivers/fpga/fpga_controller
 ```

 ## Running
 See [QuickFeather programming and debugging](https://docs.zephyrproject.org/latest/boards/arm/quick_feather/doc/index.html#programming-and-debugging) on how to load an image to the board.

 ## Sample output
 Once the board is programmed, the LED should alternately flash red and green.
	# Zephyr FPGA controller
	This module is an FPGA driver that can easily load a bitstream, reset it, check its status, enable or disable the FPGA.
	This sample demonstrates how to use the FPGA driver API.
	Currently the sample works with [Quicklogic Quickfeather board](https://github.com/QuickLogic-Corp/quick-feather-dev-board).

	## Requirements
	* Zephyr RTOS
	* [Quicklogic Quickfeather board](https://github.com/QuickLogic-Corp/quick-feather-dev-board)

	## Building

	For the QuickLogic QuickFeather board:
	```bash
	west build -b quick_feather samples/drivers/fpga/fpga_controller
	```

	## Running
	See [QuickFeather programming and debugging](https://docs.zephyrproject.org/latest/boards/arm/quick_feather/doc/index.html#programming-and-debugging) on how to load an image to the board.

	## Sample output
	Once the board is programmed, the LED should alternately flash red and green.