Release v1.9.1
diff --git a/Include/stm32l010x4.h b/Include/stm32l010x4.h index db98708..1def135 100644 --- a/Include/stm32l010x4.h +++ b/Include/stm32l010x4.h
@@ -14,7 +14,7 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright(c) 2018 STMicroelectronics. + * <h2><center>© Copyright(c) 2016 STMicroelectronics. * All rights reserved.</center></h2> * * This software component is licensed by ST under BSD 3-Clause license, @@ -2972,7 +2972,10 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ +/* Note: No specific macro feature on this device */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -4644,13 +4647,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5703,9 +5700,6 @@ #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM21)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l010x6.h b/Include/stm32l010x6.h index 6e7e2ca..56ad96a 100644 --- a/Include/stm32l010x6.h +++ b/Include/stm32l010x6.h
@@ -14,7 +14,7 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright(c) 2018 STMicroelectronics. + * <h2><center>© Copyright(c) 2016 STMicroelectronics. * All rights reserved.</center></h2> * * This software component is licensed by ST under BSD 3-Clause license, @@ -2981,7 +2981,9 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ /******************** Bit definition for RCC_CR register ********************/ @@ -4697,13 +4699,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5760,9 +5756,6 @@ #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM21)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l010x8.h b/Include/stm32l010x8.h index 6e0515d..1fc6719 100644 --- a/Include/stm32l010x8.h +++ b/Include/stm32l010x8.h
@@ -14,7 +14,7 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright(c) 2018 STMicroelectronics. + * <h2><center>© Copyright(c) 2016 STMicroelectronics. * All rights reserved.</center></h2> * * This software component is licensed by ST under BSD 3-Clause license, @@ -2980,7 +2980,9 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ /******************** Bit definition for RCC_CR register ********************/ @@ -4690,13 +4692,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5755,9 +5751,6 @@ #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM21)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l010xb.h b/Include/stm32l010xb.h index 58fab12..005e8af 100644 --- a/Include/stm32l010xb.h +++ b/Include/stm32l010xb.h
@@ -14,7 +14,7 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright(c) 2018 STMicroelectronics. + * <h2><center>© Copyright(c) 2016 STMicroelectronics. * All rights reserved.</center></h2> * * This software component is licensed by ST under BSD 3-Clause license, @@ -2988,7 +2988,9 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ /******************** Bit definition for RCC_CR register ********************/ @@ -4738,13 +4740,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5831,9 +5827,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l011xx.h b/Include/stm32l011xx.h index 81071fc..60201f6 100644 --- a/Include/stm32l011xx.h +++ b/Include/stm32l011xx.h
@@ -3081,7 +3081,10 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ +/* Note: No specific macro feature on this device */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -4771,13 +4774,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5845,9 +5842,6 @@ #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM21)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l021xx.h b/Include/stm32l021xx.h index ff12ac3..a3b41e8 100644 --- a/Include/stm32l021xx.h +++ b/Include/stm32l021xx.h
@@ -3209,7 +3209,10 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ +/* Note: No specific macro feature on this device */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -4908,13 +4911,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5985,9 +5982,6 @@ #define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM21)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l031xx.h b/Include/stm32l031xx.h index feb2ba0..ecfcf1d 100644 --- a/Include/stm32l031xx.h +++ b/Include/stm32l031xx.h
@@ -3147,8 +3147,12 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -4893,13 +4897,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -5989,9 +5987,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l041xx.h b/Include/stm32l041xx.h index 988a5ed..01b2585 100644 --- a/Include/stm32l041xx.h +++ b/Include/stm32l041xx.h
@@ -3275,8 +3275,12 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5030,13 +5034,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -6129,9 +6127,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l051xx.h b/Include/stm32l051xx.h index a573419..63810d9 100644 --- a/Include/stm32l051xx.h +++ b/Include/stm32l051xx.h
@@ -3222,8 +3222,12 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF0_SUPPORT /*!<Support MCO3 on Alternate Function AF2 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5047,13 +5051,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -6152,9 +6150,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l052xx.h b/Include/stm32l052xx.h index 2596ae5..929be1a 100644 --- a/Include/stm32l052xx.h +++ b/Include/stm32l052xx.h
@@ -3511,7 +3511,9 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ @@ -5448,13 +5450,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7229,9 +7225,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l053xx.h b/Include/stm32l053xx.h index 1e28ead..7046d07 100644 --- a/Include/stm32l053xx.h +++ b/Include/stm32l053xx.h
@@ -3653,9 +3653,13 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF0_SUPPORT /*!<Support MCO3 on Alternate Function AF2 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5605,13 +5609,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7386,9 +7384,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l061xx.h b/Include/stm32l061xx.h deleted file mode 100644 index 40d5ef8..0000000 --- a/Include/stm32l061xx.h +++ /dev/null
@@ -1,6405 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l061xx.h - * @author MCD Application Team - * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for stm32l061xx devices. - * - * This file contains: - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral's registers hardware - * - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright(c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32l061xx - * @{ - */ - -#ifndef __STM32L061xx_H -#define __STM32L061xx_H - -#ifdef __cplusplus - extern "C" { -#endif - - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ -/** - * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals - */ -#define __CM0PLUS_REV 0U /*!< Core Revision r0p0 */ -#define __MPU_PRESENT 1U /*!< STM32L0xx provides an MPU */ -#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ -#define __NVIC_PRIO_BITS 2U /*!< STM32L0xx uses 2 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ - -/** - * @} - */ - -/** @addtogroup Peripheral_interrupt_number_definition - * @{ - */ - -/** - * @brief stm32l061xx Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ - -/*!< Interrupt Number Definition */ -typedef enum -{ -/****** Cortex-M0 Processor Exceptions Numbers ******************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - HardFault_IRQn = -13, /*!< 3 Cortex-M0+ Hard Fault Interrupt */ - SVC_IRQn = -5, /*!< 11 Cortex-M0+ SV Call Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M0+ Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M0+ System Tick Interrupt */ - -/****** STM32L-0 specific Interrupt Numbers *********************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detect Interrupt */ - RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ - FLASH_IRQn = 3, /*!< FLASH Interrupt */ - RCC_IRQn = 4, /*!< RCC Interrupt */ - EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ - EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ - EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ - DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ - DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ - DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 Interrupts */ - ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts */ - LPTIM1_IRQn = 13, /*!< LPTIM1 Interrupt */ - TIM2_IRQn = 15, /*!< TIM2 Interrupt */ - TIM6_IRQn = 17, /*!< TIM6 Interrupt */ - TIM21_IRQn = 20, /*!< TIM21 Interrupt */ - TIM22_IRQn = 22, /*!< TIM22 Interrupt */ - I2C1_IRQn = 23, /*!< I2C1 Interrupt */ - I2C2_IRQn = 24, /*!< I2C2 Interrupt */ - SPI1_IRQn = 25, /*!< SPI1 Interrupt */ - SPI2_IRQn = 26, /*!< SPI2 Interrupt */ - USART1_IRQn = 27, /*!< USART1 Interrupt */ - USART2_IRQn = 28, /*!< USART2 Interrupt */ - AES_LPUART1_IRQn = 29, /*!< AES and LPUART1 Interrupts */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm0plus.h" -#include "system_stm32l0xx.h" -#include <stdint.h> - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */ - __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */ - __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */ - __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */ - __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */ - __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */ - uint32_t RESERVED1; /*!< Reserved, 0x18 */ - uint32_t RESERVED2; /*!< Reserved, 0x1C */ - __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */ - uint32_t RESERVED3; /*!< Reserved, 0x24 */ - __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */ - uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */ - __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */ - uint32_t RESERVED5[28]; /*!< Reserved, 0x44 - 0xB0 */ - __IO uint32_t CALFACT; /*!< ADC data register, Address offset:0xB4 */ -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CCR; -} ADC_Common_TypeDef; - -/** - * @brief AES hardware accelerator - */ - -typedef struct -{ - __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ - __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ - __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ - __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ - __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ - __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ - __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ - __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ - __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ - __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ - __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ -} AES_TypeDef; - -/** - * @brief Comparator - */ - -typedef struct -{ - __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x18 */ -} COMP_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ -} COMP_Common_TypeDef; - - -/** -* @brief CRC calculation unit -*/ - -typedef struct -{ -__IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ -__IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ -uint8_t RESERVED0; /*!< Reserved, 0x05 */ -uint16_t RESERVED1; /*!< Reserved, 0x06 */ -__IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ -uint32_t RESERVED2; /*!< Reserved, 0x0C */ -__IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ -__IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ -} CRC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ - __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ - __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ - __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ -}DBGMCU_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; /*!< DMA channel x configuration register */ - __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ - __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ - __IO uint32_t CMAR; /*!< DMA channel x memory address register */ -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ - __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ -} DMA_TypeDef; - -typedef struct -{ - __IO uint32_t CSELR; /*!< DMA channel selection register, Address offset: 0xA8 */ -} DMA_Request_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */ - __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */ - __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */ - __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */ - __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */ - __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */ -}EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ -typedef struct -{ - __IO uint32_t ACR; /*!< Access control register, Address offset: 0x00 */ - __IO uint32_t PECR; /*!< Program/erase control register, Address offset: 0x04 */ - __IO uint32_t PDKEYR; /*!< Power down key register, Address offset: 0x08 */ - __IO uint32_t PEKEYR; /*!< Program/erase key register, Address offset: 0x0c */ - __IO uint32_t PRGKEYR; /*!< Program memory key register, Address offset: 0x10 */ - __IO uint32_t OPTKEYR; /*!< Option byte key register, Address offset: 0x14 */ - __IO uint32_t SR; /*!< Status register, Address offset: 0x18 */ - __IO uint32_t OPTR; /*!< Option byte register, Address offset: 0x1c */ - __IO uint32_t WRPR; /*!< Write protection register, Address offset: 0x20 */ -} FLASH_TypeDef; - - -/** - * @brief Option Bytes Registers - */ -typedef struct -{ - __IO uint32_t RDP; /*!< Read protection register, Address offset: 0x00 */ - __IO uint32_t USER; /*!< user register, Address offset: 0x04 */ - __IO uint32_t WRP01; /*!< write protection Bytes 0 and 1 Address offset: 0x08 */ -} OB_TypeDef; - - -/** - * @brief General Purpose IO - */ - -typedef struct -{ - __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ - __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ - __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ - __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ - __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ - __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ - __IO uint32_t BSRR; /*!< GPIO port bit set/reset registerBSRR, Address offset: 0x18 */ - __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ - __IO uint32_t AFR[2]; /*!< GPIO alternate function register, Address offset: 0x20-0x24 */ - __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */ -}GPIO_TypeDef; - -/** - * @brief LPTIMIMER - */ -typedef struct -{ - __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ - __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ - __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ - __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ - __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ - __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ - __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ -} LPTIM_TypeDef; - -/** - * @brief SysTem Configuration - */ - -typedef struct -{ - __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ - __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x04 */ - __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */ - uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ - __IO uint32_t CFGR3; /*!< SYSCFG configuration register 3, Address offset: 0x20 */ -} SYSCFG_TypeDef; - - - -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ - __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ - __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ - __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ - __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ - __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ - __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ - __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ - __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ - __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ -}I2C_TypeDef; - - -/** - * @brief Independent WATCHDOG - */ -typedef struct -{ - __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ - __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ - __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ - __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ -} IWDG_TypeDef; - -/** - * @brief MIFARE Firewall - */ -typedef struct -{ - __IO uint32_t CSSA; /*!< Code Segment Start Address register, Address offset: 0x00 */ - __IO uint32_t CSL; /*!< Code Segment Length register, Address offset: 0x04 */ - __IO uint32_t NVDSSA; /*!< NON volatile data Segment Start Address register, Address offset: 0x08 */ - __IO uint32_t NVDSL; /*!< NON volatile data Segment Length register, Address offset: 0x0C */ - __IO uint32_t VDSSA ; /*!< Volatile data Segment Start Address register, Address offset: 0x10 */ - __IO uint32_t VDSL ; /*!< Volatile data Segment Length register, Address offset: 0x14 */ - __IO uint32_t LSSA ; /*!< Library Segment Start Address register, Address offset: 0x18 */ - __IO uint32_t LSL ; /*!< Library Segment Length register, Address offset: 0x1C */ - __IO uint32_t CR ; /*!< Configuration register, Address offset: 0x20 */ - -} FIREWALL_TypeDef; - -/** - * @brief Power Control - */ -typedef struct -{ - __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ - __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ -typedef struct -{ - __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ - __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */ - __IO uint32_t CRRCR; /*!< RCC Clock recovery RC register, Address offset: 0x08 */ - __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x0C */ - __IO uint32_t CIER; /*!< RCC Clock interrupt enable register, Address offset: 0x10 */ - __IO uint32_t CIFR; /*!< RCC Clock interrupt flag register, Address offset: 0x14 */ - __IO uint32_t CICR; /*!< RCC Clock interrupt clear register, Address offset: 0x18 */ - __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x1C */ - __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x20 */ - __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ - __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x28 */ - __IO uint32_t IOPENR; /*!< RCC Clock IO port enable register, Address offset: 0x2C */ - __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x30 */ - __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral enable register, Address offset: 0x34 */ - __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral enable register, Address offset: 0x38 */ - __IO uint32_t IOPSMENR; /*!< RCC IO port clock enable in sleep mode register, Address offset: 0x3C */ - __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clock enable in sleep mode register, Address offset: 0x40 */ - __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clock enable in sleep mode register, Address offset: 0x44 */ - __IO uint32_t APB1SMENR; /*!< RCC APB1 peripheral clock enable in sleep mode register, Address offset: 0x48 */ - __IO uint32_t CCIPR; /*!< RCC clock configuration register, Address offset: 0x4C */ - __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x50 */ -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ -typedef struct -{ - __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ - __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ - __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ - __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ - uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ - __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ - __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ - __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ - __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ - __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ - __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ - __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ - __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ - __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ - __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ - __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ - __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ - __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ - __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ - __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ - __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ - __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ - __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ -} RTC_TypeDef; - - -/** - * @brief Serial Peripheral Interface - */ -typedef struct -{ - __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ - __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ - __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ - __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ - __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ - __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ - __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ - __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ - __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ -} SPI_TypeDef; - -/** - * @brief TIM - */ -typedef struct -{ - __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ - __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ - __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ - __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ - __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - uint32_t RESERVED12;/*!< Reserved Address offset: 0x30 */ - __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ - __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ - __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ - __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - uint32_t RESERVED17;/*!< Reserved, Address offset: 0x44 */ - __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ - __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ -} TIM_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ -typedef struct -{ - __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ - __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ - __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ - __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ - __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ - __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ - __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ - __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ - __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ - __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ -} USART_TypeDef; - -/** - * @brief Window WATCHDOG - */ -typedef struct -{ - __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ - __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ -} WWDG_TypeDef; - - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ -#define FLASH_BASE (0x08000000UL) /*!< FLASH base address in the alias region */ - -#define DATA_EEPROM_BASE (0x08080000UL) /*!< DATA_EEPROM base address in the alias region */ -#define DATA_EEPROM_END (0x080807FFUL) /*!< DATA EEPROM end address in the alias region */ -#define SRAM_BASE (0x20000000UL) /*!< SRAM base address in the alias region */ -#define SRAM_SIZE_MAX (0x00002000UL) /*!< maximum SRAM size (up to 8KBytes) */ - -#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address in the alias region */ - -/*!< Peripheral memory map */ -#define APBPERIPH_BASE PERIPH_BASE -#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) -#define IOPPERIPH_BASE (PERIPH_BASE + 0x10000000UL) - -#define TIM2_BASE (APBPERIPH_BASE + 0x00000000UL) -#define TIM6_BASE (APBPERIPH_BASE + 0x00001000UL) -#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) -#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) -#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) -#define SPI2_BASE (APBPERIPH_BASE + 0x00003800UL) -#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) -#define LPUART1_BASE (APBPERIPH_BASE + 0x00004800UL) -#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) -#define I2C2_BASE (APBPERIPH_BASE + 0x00005800UL) -#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) -#define LPTIM1_BASE (APBPERIPH_BASE + 0x00007C00UL) - -#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) -#define COMP1_BASE (APBPERIPH_BASE + 0x00010018UL) -#define COMP2_BASE (APBPERIPH_BASE + 0x0001001CUL) -#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP1_BASE) -#define EXTI_BASE (APBPERIPH_BASE + 0x00010400UL) -#define TIM21_BASE (APBPERIPH_BASE + 0x00010800UL) -#define TIM22_BASE (APBPERIPH_BASE + 0x00011400UL) -#define FIREWALL_BASE (APBPERIPH_BASE + 0x00011C00UL) -#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) -#define ADC_BASE (APBPERIPH_BASE + 0x00012708UL) -#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) -#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) -#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800UL) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000UL) -#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) -#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) -#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) -#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) -#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) -#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) -#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) -#define DMA1_CSELR_BASE (DMA1_BASE + 0x000000A8UL) - - -#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) /*!< FLASH registers base address */ -#define OB_BASE (0x1FF80000UL) /*!< FLASH Option Bytes base address */ -#define FLASHSIZE_BASE (0x1FF8007CUL) /*!< FLASH Size register base address */ -#define UID_BASE (0x1FF80050UL) /*!< Unique device ID register base address */ -#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) -#define AES_BASE (AHBPERIPH_BASE + 0x00006000UL) - -#define GPIOA_BASE (IOPPERIPH_BASE + 0x00000000UL) -#define GPIOB_BASE (IOPPERIPH_BASE + 0x00000400UL) -#define GPIOC_BASE (IOPPERIPH_BASE + 0x00000800UL) -#define GPIOD_BASE (IOPPERIPH_BASE + 0x00000C00UL) -#define GPIOH_BASE (IOPPERIPH_BASE + 0x00001C00UL) - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ - -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) - -#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) -#define COMP1 ((COMP_TypeDef *) COMP1_BASE) -#define COMP2 ((COMP_TypeDef *) COMP2_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define TIM21 ((TIM_TypeDef *) TIM21_BASE) -#define TIM22 ((TIM_TypeDef *) TIM22_BASE) -#define FIREWALL ((FIREWALL_TypeDef *) FIREWALL_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC_BASE) -/* Legacy defines */ -#define ADC ADC1_COMMON -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#define DMA1_CSELR ((DMA_Request_TypeDef *) DMA1_CSELR_BASE) - - -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define OB ((OB_TypeDef *) OB_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define AES ((AES_TypeDef *) AES_BASE) - -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers Bits Definition */ -/******************************************************************************/ -/******************************************************************************/ -/* */ -/* Analog to Digital Converter (ADC) */ -/* */ -/******************************************************************************/ -/******************** Bits definition for ADC_ISR register ******************/ -#define ADC_ISR_EOCAL_Pos (11U) -#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ -#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< End of calibration flag */ -#define ADC_ISR_AWD_Pos (7U) -#define ADC_ISR_AWD_Msk (0x1UL << ADC_ISR_AWD_Pos) /*!< 0x00000080 */ -#define ADC_ISR_AWD ADC_ISR_AWD_Msk /*!< Analog watchdog flag */ -#define ADC_ISR_OVR_Pos (4U) -#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ -#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< Overrun flag */ -#define ADC_ISR_EOSEQ_Pos (3U) -#define ADC_ISR_EOSEQ_Msk (0x1UL << ADC_ISR_EOSEQ_Pos) /*!< 0x00000008 */ -#define ADC_ISR_EOSEQ ADC_ISR_EOSEQ_Msk /*!< End of Sequence flag */ -#define ADC_ISR_EOC_Pos (2U) -#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ -#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< End of Conversion */ -#define ADC_ISR_EOSMP_Pos (1U) -#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ -#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< End of sampling flag */ -#define ADC_ISR_ADRDY_Pos (0U) -#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ -#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC Ready */ - -/* Old EOSEQ bit definition, maintained for legacy purpose */ -#define ADC_ISR_EOS ADC_ISR_EOSEQ - -/******************** Bits definition for ADC_IER register ******************/ -#define ADC_IER_EOCALIE_Pos (11U) -#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ -#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< Enf Of Calibration interrupt enable */ -#define ADC_IER_AWDIE_Pos (7U) -#define ADC_IER_AWDIE_Msk (0x1UL << ADC_IER_AWDIE_Pos) /*!< 0x00000080 */ -#define ADC_IER_AWDIE ADC_IER_AWDIE_Msk /*!< Analog Watchdog interrupt enable */ -#define ADC_IER_OVRIE_Pos (4U) -#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ -#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< Overrun interrupt enable */ -#define ADC_IER_EOSEQIE_Pos (3U) -#define ADC_IER_EOSEQIE_Msk (0x1UL << ADC_IER_EOSEQIE_Pos) /*!< 0x00000008 */ -#define ADC_IER_EOSEQIE ADC_IER_EOSEQIE_Msk /*!< End of Sequence of conversion interrupt enable */ -#define ADC_IER_EOCIE_Pos (2U) -#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ -#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< End of Conversion interrupt enable */ -#define ADC_IER_EOSMPIE_Pos (1U) -#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ -#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< End of sampling interrupt enable */ -#define ADC_IER_ADRDYIE_Pos (0U) -#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ -#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC Ready interrupt enable */ - -/* Old EOSEQIE bit definition, maintained for legacy purpose */ -#define ADC_IER_EOSIE ADC_IER_EOSEQIE - -/******************** Bits definition for ADC_CR register *******************/ -#define ADC_CR_ADCAL_Pos (31U) -#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ -#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ -#define ADC_CR_ADVREGEN_Pos (28U) -#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ -#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC Voltage Regulator Enable */ -#define ADC_CR_ADSTP_Pos (4U) -#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ -#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC stop of conversion command */ -#define ADC_CR_ADSTART_Pos (2U) -#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ -#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC start of conversion */ -#define ADC_CR_ADDIS_Pos (1U) -#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ -#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable command */ -#define ADC_CR_ADEN_Pos (0U) -#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ -#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable control */ /*#### TBV */ - -/******************* Bits definition for ADC_CFGR1 register *****************/ -#define ADC_CFGR1_AWDCH_Pos (26U) -#define ADC_CFGR1_AWDCH_Msk (0x1FUL << ADC_CFGR1_AWDCH_Pos) /*!< 0x7C000000 */ -#define ADC_CFGR1_AWDCH ADC_CFGR1_AWDCH_Msk /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ -#define ADC_CFGR1_AWDCH_0 (0x01UL << ADC_CFGR1_AWDCH_Pos) /*!< 0x04000000 */ -#define ADC_CFGR1_AWDCH_1 (0x02UL << ADC_CFGR1_AWDCH_Pos) /*!< 0x08000000 */ -#define ADC_CFGR1_AWDCH_2 (0x04UL << ADC_CFGR1_AWDCH_Pos) /*!< 0x10000000 */ -#define ADC_CFGR1_AWDCH_3 (0x08UL << ADC_CFGR1_AWDCH_Pos) /*!< 0x20000000 */ -#define ADC_CFGR1_AWDCH_4 (0x10UL << ADC_CFGR1_AWDCH_Pos) /*!< 0x40000000 */ -#define ADC_CFGR1_AWDEN_Pos (23U) -#define ADC_CFGR1_AWDEN_Msk (0x1UL << ADC_CFGR1_AWDEN_Pos) /*!< 0x00800000 */ -#define ADC_CFGR1_AWDEN ADC_CFGR1_AWDEN_Msk /*!< Analog watchdog enable on regular channels */ -#define ADC_CFGR1_AWDSGL_Pos (22U) -#define ADC_CFGR1_AWDSGL_Msk (0x1UL << ADC_CFGR1_AWDSGL_Pos) /*!< 0x00400000 */ -#define ADC_CFGR1_AWDSGL ADC_CFGR1_AWDSGL_Msk /*!< Enable the watchdog on a single channel or on all channels */ -#define ADC_CFGR1_DISCEN_Pos (16U) -#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ -#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< Discontinuous mode on regular channels */ -#define ADC_CFGR1_AUTOFF_Pos (15U) -#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ -#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC auto power off */ -#define ADC_CFGR1_WAIT_Pos (14U) -#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ -#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC wait conversion mode */ -#define ADC_CFGR1_CONT_Pos (13U) -#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ -#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< Continuous Conversion */ -#define ADC_CFGR1_OVRMOD_Pos (12U) -#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ -#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< Overrun mode */ -#define ADC_CFGR1_EXTEN_Pos (10U) -#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ -#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */ -#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ -#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ -#define ADC_CFGR1_EXTSEL_Pos (6U) -#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ -#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ -#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ -#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ -#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ -#define ADC_CFGR1_ALIGN_Pos (5U) -#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ -#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< Data Alignment */ -#define ADC_CFGR1_RES_Pos (3U) -#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ -#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< RES[1:0] bits (Resolution) */ -#define ADC_CFGR1_RES_0 (0x1UL << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ -#define ADC_CFGR1_RES_1 (0x2UL << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ -#define ADC_CFGR1_SCANDIR_Pos (2U) -#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ -#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< Sequence scan direction */ -#define ADC_CFGR1_DMACFG_Pos (1U) -#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ -#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< Direct memory access configuration */ -#define ADC_CFGR1_DMAEN_Pos (0U) -#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ -#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< Direct memory access enable */ - -/* Old WAIT bit definition, maintained for legacy purpose */ -#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT - -/******************* Bits definition for ADC_CFGR2 register *****************/ -#define ADC_CFGR2_TOVS_Pos (9U) -#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x80000200 */ -#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< Triggered Oversampling */ -#define ADC_CFGR2_OVSS_Pos (5U) -#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ -#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< OVSS [3:0] bits (Oversampling shift) */ -#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ -#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ -#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ -#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ -#define ADC_CFGR2_OVSR_Pos (2U) -#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ -#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< OVSR [2:0] bits (Oversampling ratio) */ -#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ -#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ -#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ -#define ADC_CFGR2_OVSE_Pos (0U) -#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ -#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< Oversampler Enable */ -#define ADC_CFGR2_CKMODE_Pos (30U) -#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ -#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< CKMODE [1:0] bits (ADC clock mode) */ -#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ -#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ - - -/****************** Bit definition for ADC_SMPR register ********************/ -#define ADC_SMPR_SMP_Pos (0U) -#define ADC_SMPR_SMP_Msk (0x7UL << ADC_SMPR_SMP_Pos) /*!< 0x00000007 */ -#define ADC_SMPR_SMP ADC_SMPR_SMP_Msk /*!< SMPR[2:0] bits (Sampling time selection) */ -#define ADC_SMPR_SMP_0 (0x1UL << ADC_SMPR_SMP_Pos) /*!< 0x00000001 */ -#define ADC_SMPR_SMP_1 (0x2UL << ADC_SMPR_SMP_Pos) /*!< 0x00000002 */ -#define ADC_SMPR_SMP_2 (0x4UL << ADC_SMPR_SMP_Pos) /*!< 0x00000004 */ - -/* Legacy defines */ -#define ADC_SMPR_SMPR ADC_SMPR_SMP -#define ADC_SMPR_SMPR_0 ADC_SMPR_SMP_0 -#define ADC_SMPR_SMPR_1 ADC_SMPR_SMP_1 -#define ADC_SMPR_SMPR_2 ADC_SMPR_SMP_2 - -/******************* Bit definition for ADC_TR register ********************/ -#define ADC_TR_HT_Pos (16U) -#define ADC_TR_HT_Msk (0xFFFUL << ADC_TR_HT_Pos) /*!< 0x0FFF0000 */ -#define ADC_TR_HT ADC_TR_HT_Msk /*!< Analog watchdog high threshold */ -#define ADC_TR_LT_Pos (0U) -#define ADC_TR_LT_Msk (0xFFFUL << ADC_TR_LT_Pos) /*!< 0x00000FFF */ -#define ADC_TR_LT ADC_TR_LT_Msk /*!< Analog watchdog low threshold */ - -/****************** Bit definition for ADC_CHSELR register ******************/ -#define ADC_CHSELR_CHSEL_Pos (0U) -#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ -#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels */ -#define ADC_CHSELR_CHSEL18_Pos (18U) -#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ -#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< Channel 18 selection */ -#define ADC_CHSELR_CHSEL17_Pos (17U) -#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ -#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< Channel 17 selection */ -#define ADC_CHSELR_CHSEL15_Pos (15U) -#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ -#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< Channel 15 selection */ -#define ADC_CHSELR_CHSEL14_Pos (14U) -#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ -#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< Channel 14 selection */ -#define ADC_CHSELR_CHSEL13_Pos (13U) -#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ -#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< Channel 13 selection */ -#define ADC_CHSELR_CHSEL12_Pos (12U) -#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ -#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< Channel 12 selection */ -#define ADC_CHSELR_CHSEL11_Pos (11U) -#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ -#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< Channel 11 selection */ -#define ADC_CHSELR_CHSEL10_Pos (10U) -#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ -#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< Channel 10 selection */ -#define ADC_CHSELR_CHSEL9_Pos (9U) -#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ -#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< Channel 9 selection */ -#define ADC_CHSELR_CHSEL8_Pos (8U) -#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ -#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< Channel 8 selection */ -#define ADC_CHSELR_CHSEL7_Pos (7U) -#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ -#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< Channel 7 selection */ -#define ADC_CHSELR_CHSEL6_Pos (6U) -#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ -#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< Channel 6 selection */ -#define ADC_CHSELR_CHSEL5_Pos (5U) -#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ -#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< Channel 5 selection */ -#define ADC_CHSELR_CHSEL4_Pos (4U) -#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ -#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< Channel 4 selection */ -#define ADC_CHSELR_CHSEL3_Pos (3U) -#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ -#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< Channel 3 selection */ -#define ADC_CHSELR_CHSEL2_Pos (2U) -#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ -#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< Channel 2 selection */ -#define ADC_CHSELR_CHSEL1_Pos (1U) -#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ -#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< Channel 1 selection */ -#define ADC_CHSELR_CHSEL0_Pos (0U) -#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ -#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< Channel 0 selection */ - -/******************** Bit definition for ADC_DR register ********************/ -#define ADC_DR_DATA_Pos (0U) -#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ -#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< Regular data */ - -/******************** Bit definition for ADC_CALFACT register ********************/ -#define ADC_CALFACT_CALFACT_Pos (0U) -#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ -#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< Calibration factor */ - -/******************* Bit definition for ADC_CCR register ********************/ -#define ADC_CCR_LFMEN_Pos (25U) -#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ -#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Low Frequency Mode enable */ -#define ADC_CCR_TSEN_Pos (23U) -#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ -#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< Temperature sensore enable */ -#define ADC_CCR_VREFEN_Pos (22U) -#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ -#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< Vrefint enable */ -#define ADC_CCR_PRESC_Pos (18U) -#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ -#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< PRESC [3:0] bits (ADC prescaler) */ -#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ -#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ -#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ -#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ - -/******************************************************************************/ -/* */ -/* Advanced Encryption Standard (AES) */ -/* */ -/******************************************************************************/ -/******************* Bit definition for AES_CR register *********************/ -#define AES_CR_EN_Pos (0U) -#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ -#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ -#define AES_CR_DATATYPE_Pos (1U) -#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ -#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ -#define AES_CR_DATATYPE_0 (0x1UL << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ -#define AES_CR_DATATYPE_1 (0x2UL << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ - -#define AES_CR_MODE_Pos (3U) -#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ -#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ -#define AES_CR_MODE_0 (0x1UL << AES_CR_MODE_Pos) /*!< 0x00000008 */ -#define AES_CR_MODE_1 (0x2UL << AES_CR_MODE_Pos) /*!< 0x00000010 */ - -#define AES_CR_CHMOD_Pos (5U) -#define AES_CR_CHMOD_Msk (0x3UL << AES_CR_CHMOD_Pos) /*!< 0x00000060 */ -#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ -#define AES_CR_CHMOD_0 (0x1UL << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ -#define AES_CR_CHMOD_1 (0x2UL << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ - -#define AES_CR_CCFC_Pos (7U) -#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ -#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ -#define AES_CR_ERRC_Pos (8U) -#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ -#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ -#define AES_CR_CCIE_Pos (9U) -#define AES_CR_CCIE_Msk (0x1UL << AES_CR_CCIE_Pos) /*!< 0x00000200 */ -#define AES_CR_CCIE AES_CR_CCIE_Msk /*!< Computation Complete Interrupt Enable */ -#define AES_CR_ERRIE_Pos (10U) -#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ -#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ -#define AES_CR_DMAINEN_Pos (11U) -#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ -#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< DMA ENable managing the data input phase */ -#define AES_CR_DMAOUTEN_Pos (12U) -#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ -#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< DMA Enable managing the data output phase */ - -/******************* Bit definition for AES_SR register *********************/ -#define AES_SR_CCF_Pos (0U) -#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ -#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ -#define AES_SR_RDERR_Pos (1U) -#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ -#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ -#define AES_SR_WRERR_Pos (2U) -#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ -#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ - -/******************* Bit definition for AES_DINR register *******************/ -#define AES_DINR_Pos (0U) -#define AES_DINR_Msk (0xFFFFUL << AES_DINR_Pos) /*!< 0x0000FFFF */ -#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ - -/******************* Bit definition for AES_DOUTR register ******************/ -#define AES_DOUTR_Pos (0U) -#define AES_DOUTR_Msk (0xFFFFUL << AES_DOUTR_Pos) /*!< 0x0000FFFF */ -#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ - -/******************* Bit definition for AES_KEYR0 register ******************/ -#define AES_KEYR0_Pos (0U) -#define AES_KEYR0_Msk (0xFFFFUL << AES_KEYR0_Pos) /*!< 0x0000FFFF */ -#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ - -/******************* Bit definition for AES_KEYR1 register ******************/ -#define AES_KEYR1_Pos (0U) -#define AES_KEYR1_Msk (0xFFFFUL << AES_KEYR1_Pos) /*!< 0x0000FFFF */ -#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ - -/******************* Bit definition for AES_KEYR2 register ******************/ -#define AES_KEYR2_Pos (0U) -#define AES_KEYR2_Msk (0xFFFFUL << AES_KEYR2_Pos) /*!< 0x0000FFFF */ -#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ - -/******************* Bit definition for AES_KEYR3 register ******************/ -#define AES_KEYR3_Pos (0U) -#define AES_KEYR3_Msk (0xFFFFUL << AES_KEYR3_Pos) /*!< 0x0000FFFF */ -#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ - -/******************* Bit definition for AES_IVR0 register *******************/ -#define AES_IVR0_Pos (0U) -#define AES_IVR0_Msk (0xFFFFUL << AES_IVR0_Pos) /*!< 0x0000FFFF */ -#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ - -/******************* Bit definition for AES_IVR1 register *******************/ -#define AES_IVR1_Pos (0U) -#define AES_IVR1_Msk (0xFFFFUL << AES_IVR1_Pos) /*!< 0x0000FFFF */ -#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ - -/******************* Bit definition for AES_IVR2 register *******************/ -#define AES_IVR2_Pos (0U) -#define AES_IVR2_Msk (0xFFFFUL << AES_IVR2_Pos) /*!< 0x0000FFFF */ -#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ - -/******************* Bit definition for AES_IVR3 register *******************/ -#define AES_IVR3_Pos (0U) -#define AES_IVR3_Msk (0xFFFFUL << AES_IVR3_Pos) /*!< 0x0000FFFF */ -#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ - -/******************************************************************************/ -/* */ -/* Analog Comparators (COMP) */ -/* */ -/******************************************************************************/ -/************* Bit definition for COMP_CSR register (COMP1 and COMP2) **************/ -/* COMP1 bits definition */ -#define COMP_CSR_COMP1EN_Pos (0U) -#define COMP_CSR_COMP1EN_Msk (0x1UL << COMP_CSR_COMP1EN_Pos) /*!< 0x00000001 */ -#define COMP_CSR_COMP1EN COMP_CSR_COMP1EN_Msk /*!< COMP1 enable */ -#define COMP_CSR_COMP1INNSEL_Pos (4U) -#define COMP_CSR_COMP1INNSEL_Msk (0x3UL << COMP_CSR_COMP1INNSEL_Pos) /*!< 0x00000030 */ -#define COMP_CSR_COMP1INNSEL COMP_CSR_COMP1INNSEL_Msk /*!< COMP1 inverting input select */ -#define COMP_CSR_COMP1INNSEL_0 (0x1UL << COMP_CSR_COMP1INNSEL_Pos) /*!< 0x00000010 */ -#define COMP_CSR_COMP1INNSEL_1 (0x2UL << COMP_CSR_COMP1INNSEL_Pos) /*!< 0x00000020 */ -#define COMP_CSR_COMP1WM_Pos (8U) -#define COMP_CSR_COMP1WM_Msk (0x1UL << COMP_CSR_COMP1WM_Pos) /*!< 0x00000100 */ -#define COMP_CSR_COMP1WM COMP_CSR_COMP1WM_Msk /*!< Comparators window mode enable */ -#define COMP_CSR_COMP1LPTIM1IN1_Pos (12U) -#define COMP_CSR_COMP1LPTIM1IN1_Msk (0x1UL << COMP_CSR_COMP1LPTIM1IN1_Pos) /*!< 0x00001000 */ -#define COMP_CSR_COMP1LPTIM1IN1 COMP_CSR_COMP1LPTIM1IN1_Msk /*!< COMP1 LPTIM1 IN1 connection */ -#define COMP_CSR_COMP1POLARITY_Pos (15U) -#define COMP_CSR_COMP1POLARITY_Msk (0x1UL << COMP_CSR_COMP1POLARITY_Pos) /*!< 0x00008000 */ -#define COMP_CSR_COMP1POLARITY COMP_CSR_COMP1POLARITY_Msk /*!< COMP1 output polarity */ -#define COMP_CSR_COMP1VALUE_Pos (30U) -#define COMP_CSR_COMP1VALUE_Msk (0x1UL << COMP_CSR_COMP1VALUE_Pos) /*!< 0x40000000 */ -#define COMP_CSR_COMP1VALUE COMP_CSR_COMP1VALUE_Msk /*!< COMP1 output level */ -#define COMP_CSR_COMP1LOCK_Pos (31U) -#define COMP_CSR_COMP1LOCK_Msk (0x1UL << COMP_CSR_COMP1LOCK_Pos) /*!< 0x80000000 */ -#define COMP_CSR_COMP1LOCK COMP_CSR_COMP1LOCK_Msk /*!< COMP1 lock */ -/* COMP2 bits definition */ -#define COMP_CSR_COMP2EN_Pos (0U) -#define COMP_CSR_COMP2EN_Msk (0x1UL << COMP_CSR_COMP2EN_Pos) /*!< 0x00000001 */ -#define COMP_CSR_COMP2EN COMP_CSR_COMP2EN_Msk /*!< COMP2 enable */ -#define COMP_CSR_COMP2SPEED_Pos (3U) -#define COMP_CSR_COMP2SPEED_Msk (0x1UL << COMP_CSR_COMP2SPEED_Pos) /*!< 0x00000008 */ -#define COMP_CSR_COMP2SPEED COMP_CSR_COMP2SPEED_Msk /*!< COMP2 power mode */ -#define COMP_CSR_COMP2INNSEL_Pos (4U) -#define COMP_CSR_COMP2INNSEL_Msk (0x7UL << COMP_CSR_COMP2INNSEL_Pos) /*!< 0x00000070 */ -#define COMP_CSR_COMP2INNSEL COMP_CSR_COMP2INNSEL_Msk /*!< COMP2 inverting input select */ -#define COMP_CSR_COMP2INNSEL_0 (0x1UL << COMP_CSR_COMP2INNSEL_Pos) /*!< 0x00000010 */ -#define COMP_CSR_COMP2INNSEL_1 (0x2UL << COMP_CSR_COMP2INNSEL_Pos) /*!< 0x00000020 */ -#define COMP_CSR_COMP2INNSEL_2 (0x4UL << COMP_CSR_COMP2INNSEL_Pos) /*!< 0x00000040 */ -#define COMP_CSR_COMP2INPSEL_Pos (8U) -#define COMP_CSR_COMP2INPSEL_Msk (0x7UL << COMP_CSR_COMP2INPSEL_Pos) /*!< 0x00000700 */ -#define COMP_CSR_COMP2INPSEL COMP_CSR_COMP2INPSEL_Msk /*!< COMPx non inverting input select */ -#define COMP_CSR_COMP2INPSEL_0 (0x1UL << COMP_CSR_COMP2INPSEL_Pos) /*!< 0x00000100 */ -#define COMP_CSR_COMP2INPSEL_1 (0x2UL << COMP_CSR_COMP2INPSEL_Pos) /*!< 0x00000200 */ -#define COMP_CSR_COMP2INPSEL_2 (0x4UL << COMP_CSR_COMP2INPSEL_Pos) /*!< 0x00000400 */ -#define COMP_CSR_COMP2LPTIM1IN2_Pos (12U) -#define COMP_CSR_COMP2LPTIM1IN2_Msk (0x1UL << COMP_CSR_COMP2LPTIM1IN2_Pos) /*!< 0x00001000 */ -#define COMP_CSR_COMP2LPTIM1IN2 COMP_CSR_COMP2LPTIM1IN2_Msk /*!< COMP2 LPTIM1 IN2 connection */ -#define COMP_CSR_COMP2LPTIM1IN1_Pos (13U) -#define COMP_CSR_COMP2LPTIM1IN1_Msk (0x1UL << COMP_CSR_COMP2LPTIM1IN1_Pos) /*!< 0x00002000 */ -#define COMP_CSR_COMP2LPTIM1IN1 COMP_CSR_COMP2LPTIM1IN1_Msk /*!< COMP2 LPTIM1 IN1 connection */ -#define COMP_CSR_COMP2POLARITY_Pos (15U) -#define COMP_CSR_COMP2POLARITY_Msk (0x1UL << COMP_CSR_COMP2POLARITY_Pos) /*!< 0x00008000 */ -#define COMP_CSR_COMP2POLARITY COMP_CSR_COMP2POLARITY_Msk /*!< COMP2 output polarity */ -#define COMP_CSR_COMP2VALUE_Pos (30U) -#define COMP_CSR_COMP2VALUE_Msk (0x1UL << COMP_CSR_COMP2VALUE_Pos) /*!< 0x40000000 */ -#define COMP_CSR_COMP2VALUE COMP_CSR_COMP2VALUE_Msk /*!< COMP2 output level */ -#define COMP_CSR_COMP2LOCK_Pos (31U) -#define COMP_CSR_COMP2LOCK_Msk (0x1UL << COMP_CSR_COMP2LOCK_Pos) /*!< 0x80000000 */ -#define COMP_CSR_COMP2LOCK COMP_CSR_COMP2LOCK_Msk /*!< COMP2 lock */ - -/********************** Bit definition for COMP_CSR register common ****************/ -#define COMP_CSR_COMPxEN_Pos (0U) -#define COMP_CSR_COMPxEN_Msk (0x1UL << COMP_CSR_COMPxEN_Pos) /*!< 0x00000001 */ -#define COMP_CSR_COMPxEN COMP_CSR_COMPxEN_Msk /*!< COMPx enable */ -#define COMP_CSR_COMPxPOLARITY_Pos (15U) -#define COMP_CSR_COMPxPOLARITY_Msk (0x1UL << COMP_CSR_COMPxPOLARITY_Pos) /*!< 0x00008000 */ -#define COMP_CSR_COMPxPOLARITY COMP_CSR_COMPxPOLARITY_Msk /*!< COMPx output polarity */ -#define COMP_CSR_COMPxOUTVALUE_Pos (30U) -#define COMP_CSR_COMPxOUTVALUE_Msk (0x1UL << COMP_CSR_COMPxOUTVALUE_Pos) /*!< 0x40000000 */ -#define COMP_CSR_COMPxOUTVALUE COMP_CSR_COMPxOUTVALUE_Msk /*!< COMPx output level */ -#define COMP_CSR_COMPxLOCK_Pos (31U) -#define COMP_CSR_COMPxLOCK_Msk (0x1UL << COMP_CSR_COMPxLOCK_Pos) /*!< 0x80000000 */ -#define COMP_CSR_COMPxLOCK COMP_CSR_COMPxLOCK_Msk /*!< COMPx lock */ - -/* Reference defines */ -#define COMP_CSR_WINMODE COMP_CSR_COMP1WM /*!< Bit intended to be used with COMP common instance (COMP_Common_TypeDef) */ - -/******************************************************************************/ -/* */ -/* CRC calculation unit (CRC) */ -/* */ -/******************************************************************************/ -/******************* Bit definition for CRC_DR register *********************/ -#define CRC_DR_DR_Pos (0U) -#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ -#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ - -/******************* Bit definition for CRC_IDR register ********************/ -#define CRC_IDR_IDR (0xFFU) /*!< General-purpose 8-bit data register bits */ - -/******************** Bit definition for CRC_CR register ********************/ -#define CRC_CR_RESET_Pos (0U) -#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ -#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ -#define CRC_CR_POLYSIZE_Pos (3U) -#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ -#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ -#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ -#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ -#define CRC_CR_REV_IN_Pos (5U) -#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ -#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ -#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ -#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ -#define CRC_CR_REV_OUT_Pos (7U) -#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ -#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ - -/******************* Bit definition for CRC_INIT register *******************/ -#define CRC_INIT_INIT_Pos (0U) -#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ -#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ - -/******************* Bit definition for CRC_POL register ********************/ -#define CRC_POL_POL_Pos (0U) -#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ -#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ - -/******************************************************************************/ -/* */ -/* Debug MCU (DBGMCU) */ -/* */ -/******************************************************************************/ - -/**************** Bit definition for DBGMCU_IDCODE register *****************/ -#define DBGMCU_IDCODE_DEV_ID_Pos (0U) -#define DBGMCU_IDCODE_DEV_ID_Msk (0xFFFUL << DBGMCU_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */ -#define DBGMCU_IDCODE_DEV_ID DBGMCU_IDCODE_DEV_ID_Msk /*!< Device Identifier */ - -#define DBGMCU_IDCODE_REV_ID_Pos (16U) -#define DBGMCU_IDCODE_REV_ID_Msk (0xFFFFUL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */ -#define DBGMCU_IDCODE_REV_ID DBGMCU_IDCODE_REV_ID_Msk /*!< REV_ID[15:0] bits (Revision Identifier) */ -#define DBGMCU_IDCODE_REV_ID_0 (0x0001UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00010000 */ -#define DBGMCU_IDCODE_REV_ID_1 (0x0002UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00020000 */ -#define DBGMCU_IDCODE_REV_ID_2 (0x0004UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00040000 */ -#define DBGMCU_IDCODE_REV_ID_3 (0x0008UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00080000 */ -#define DBGMCU_IDCODE_REV_ID_4 (0x0010UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00100000 */ -#define DBGMCU_IDCODE_REV_ID_5 (0x0020UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00200000 */ -#define DBGMCU_IDCODE_REV_ID_6 (0x0040UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00400000 */ -#define DBGMCU_IDCODE_REV_ID_7 (0x0080UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00800000 */ -#define DBGMCU_IDCODE_REV_ID_8 (0x0100UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x01000000 */ -#define DBGMCU_IDCODE_REV_ID_9 (0x0200UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x02000000 */ -#define DBGMCU_IDCODE_REV_ID_10 (0x0400UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x04000000 */ -#define DBGMCU_IDCODE_REV_ID_11 (0x0800UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x08000000 */ -#define DBGMCU_IDCODE_REV_ID_12 (0x1000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x10000000 */ -#define DBGMCU_IDCODE_REV_ID_13 (0x2000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x20000000 */ -#define DBGMCU_IDCODE_REV_ID_14 (0x4000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x40000000 */ -#define DBGMCU_IDCODE_REV_ID_15 (0x8000UL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for DBGMCU_CR register *******************/ -#define DBGMCU_CR_DBG_Pos (0U) -#define DBGMCU_CR_DBG_Msk (0x7UL << DBGMCU_CR_DBG_Pos) /*!< 0x00000007 */ -#define DBGMCU_CR_DBG DBGMCU_CR_DBG_Msk /*!< Debug mode mask */ -#define DBGMCU_CR_DBG_SLEEP_Pos (0U) -#define DBGMCU_CR_DBG_SLEEP_Msk (0x1UL << DBGMCU_CR_DBG_SLEEP_Pos) /*!< 0x00000001 */ -#define DBGMCU_CR_DBG_SLEEP DBGMCU_CR_DBG_SLEEP_Msk /*!< Debug Sleep Mode */ -#define DBGMCU_CR_DBG_STOP_Pos (1U) -#define DBGMCU_CR_DBG_STOP_Msk (0x1UL << DBGMCU_CR_DBG_STOP_Pos) /*!< 0x00000002 */ -#define DBGMCU_CR_DBG_STOP DBGMCU_CR_DBG_STOP_Msk /*!< Debug Stop Mode */ -#define DBGMCU_CR_DBG_STANDBY_Pos (2U) -#define DBGMCU_CR_DBG_STANDBY_Msk (0x1UL << DBGMCU_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */ -#define DBGMCU_CR_DBG_STANDBY DBGMCU_CR_DBG_STANDBY_Msk /*!< Debug Standby mode */ - -/****************** Bit definition for DBGMCU_APB1_FZ register **************/ -#define DBGMCU_APB1_FZ_DBG_TIM2_STOP_Pos (0U) -#define DBGMCU_APB1_FZ_DBG_TIM2_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_TIM2_STOP_Pos) /*!< 0x00000001 */ -#define DBGMCU_APB1_FZ_DBG_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP_Msk /*!< TIM2 counter stopped when core is halted */ -#define DBGMCU_APB1_FZ_DBG_TIM6_STOP_Pos (4U) -#define DBGMCU_APB1_FZ_DBG_TIM6_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_TIM6_STOP_Pos) /*!< 0x00000010 */ -#define DBGMCU_APB1_FZ_DBG_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP_Msk /*!< TIM6 counter stopped when core is halted */ -#define DBGMCU_APB1_FZ_DBG_RTC_STOP_Pos (10U) -#define DBGMCU_APB1_FZ_DBG_RTC_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ -#define DBGMCU_APB1_FZ_DBG_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP_Msk /*!< RTC Calendar frozen when core is halted */ -#define DBGMCU_APB1_FZ_DBG_WWDG_STOP_Pos (11U) -#define DBGMCU_APB1_FZ_DBG_WWDG_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_WWDG_STOP_Pos) /*!< 0x00000800 */ -#define DBGMCU_APB1_FZ_DBG_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP_Msk /*!< Debug Window Watchdog stopped when Core is halted */ -#define DBGMCU_APB1_FZ_DBG_IWDG_STOP_Pos (12U) -#define DBGMCU_APB1_FZ_DBG_IWDG_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ -#define DBGMCU_APB1_FZ_DBG_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP_Msk /*!< Debug Independent Watchdog stopped when Core is halted */ -#define DBGMCU_APB1_FZ_DBG_I2C1_STOP_Pos (21U) -#define DBGMCU_APB1_FZ_DBG_I2C1_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_I2C1_STOP_Pos) /*!< 0x00200000 */ -#define DBGMCU_APB1_FZ_DBG_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_STOP_Msk /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ -#define DBGMCU_APB1_FZ_DBG_I2C2_STOP_Pos (22U) -#define DBGMCU_APB1_FZ_DBG_I2C2_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_I2C2_STOP_Pos) /*!< 0x00400000 */ -#define DBGMCU_APB1_FZ_DBG_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_STOP_Msk /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ -#define DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Pos (31U) -#define DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Msk (0x1UL << DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Pos) /*!< 0x80000000 */ -#define DBGMCU_APB1_FZ_DBG_LPTIMER_STOP DBGMCU_APB1_FZ_DBG_LPTIMER_STOP_Msk /*!< LPTIM1 counter stopped when core is halted */ -/****************** Bit definition for DBGMCU_APB2_FZ register **************/ -#define DBGMCU_APB2_FZ_DBG_TIM22_STOP_Pos (5U) -#define DBGMCU_APB2_FZ_DBG_TIM22_STOP_Msk (0x1UL << DBGMCU_APB2_FZ_DBG_TIM22_STOP_Pos) /*!< 0x00000020 */ -#define DBGMCU_APB2_FZ_DBG_TIM22_STOP DBGMCU_APB2_FZ_DBG_TIM22_STOP_Msk /*!< TIM22 counter stopped when core is halted */ -#define DBGMCU_APB2_FZ_DBG_TIM21_STOP_Pos (2U) -#define DBGMCU_APB2_FZ_DBG_TIM21_STOP_Msk (0x1UL << DBGMCU_APB2_FZ_DBG_TIM21_STOP_Pos) /*!< 0x00000004 */ -#define DBGMCU_APB2_FZ_DBG_TIM21_STOP DBGMCU_APB2_FZ_DBG_TIM21_STOP_Msk /*!< TIM21 counter stopped when core is halted */ - -/******************************************************************************/ -/* */ -/* DMA Controller (DMA) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for DMA_ISR register ********************/ -#define DMA_ISR_GIF1_Pos (0U) -#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ -#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ -#define DMA_ISR_TCIF1_Pos (1U) -#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ -#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ -#define DMA_ISR_HTIF1_Pos (2U) -#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ -#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ -#define DMA_ISR_TEIF1_Pos (3U) -#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ -#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ -#define DMA_ISR_GIF2_Pos (4U) -#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ -#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ -#define DMA_ISR_TCIF2_Pos (5U) -#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ -#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ -#define DMA_ISR_HTIF2_Pos (6U) -#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ -#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ -#define DMA_ISR_TEIF2_Pos (7U) -#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ -#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ -#define DMA_ISR_GIF3_Pos (8U) -#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ -#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ -#define DMA_ISR_TCIF3_Pos (9U) -#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ -#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ -#define DMA_ISR_HTIF3_Pos (10U) -#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ -#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ -#define DMA_ISR_TEIF3_Pos (11U) -#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ -#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ -#define DMA_ISR_GIF4_Pos (12U) -#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ -#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ -#define DMA_ISR_TCIF4_Pos (13U) -#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ -#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ -#define DMA_ISR_HTIF4_Pos (14U) -#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ -#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ -#define DMA_ISR_TEIF4_Pos (15U) -#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ -#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ -#define DMA_ISR_GIF5_Pos (16U) -#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ -#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ -#define DMA_ISR_TCIF5_Pos (17U) -#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ -#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ -#define DMA_ISR_HTIF5_Pos (18U) -#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ -#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ -#define DMA_ISR_TEIF5_Pos (19U) -#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ -#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ -#define DMA_ISR_GIF6_Pos (20U) -#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ -#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ -#define DMA_ISR_TCIF6_Pos (21U) -#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ -#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ -#define DMA_ISR_HTIF6_Pos (22U) -#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ -#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ -#define DMA_ISR_TEIF6_Pos (23U) -#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ -#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ -#define DMA_ISR_GIF7_Pos (24U) -#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ -#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ -#define DMA_ISR_TCIF7_Pos (25U) -#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ -#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ -#define DMA_ISR_HTIF7_Pos (26U) -#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ -#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ -#define DMA_ISR_TEIF7_Pos (27U) -#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ -#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ - -/******************* Bit definition for DMA_IFCR register *******************/ -#define DMA_IFCR_CGIF1_Pos (0U) -#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ -#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ -#define DMA_IFCR_CTCIF1_Pos (1U) -#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ -#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ -#define DMA_IFCR_CHTIF1_Pos (2U) -#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ -#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ -#define DMA_IFCR_CTEIF1_Pos (3U) -#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ -#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ -#define DMA_IFCR_CGIF2_Pos (4U) -#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ -#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ -#define DMA_IFCR_CTCIF2_Pos (5U) -#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ -#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ -#define DMA_IFCR_CHTIF2_Pos (6U) -#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ -#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ -#define DMA_IFCR_CTEIF2_Pos (7U) -#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ -#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ -#define DMA_IFCR_CGIF3_Pos (8U) -#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ -#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ -#define DMA_IFCR_CTCIF3_Pos (9U) -#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ -#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ -#define DMA_IFCR_CHTIF3_Pos (10U) -#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ -#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ -#define DMA_IFCR_CTEIF3_Pos (11U) -#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ -#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ -#define DMA_IFCR_CGIF4_Pos (12U) -#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ -#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ -#define DMA_IFCR_CTCIF4_Pos (13U) -#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ -#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ -#define DMA_IFCR_CHTIF4_Pos (14U) -#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ -#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ -#define DMA_IFCR_CTEIF4_Pos (15U) -#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ -#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ -#define DMA_IFCR_CGIF5_Pos (16U) -#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ -#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ -#define DMA_IFCR_CTCIF5_Pos (17U) -#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ -#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ -#define DMA_IFCR_CHTIF5_Pos (18U) -#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ -#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ -#define DMA_IFCR_CTEIF5_Pos (19U) -#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ -#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ -#define DMA_IFCR_CGIF6_Pos (20U) -#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ -#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ -#define DMA_IFCR_CTCIF6_Pos (21U) -#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ -#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ -#define DMA_IFCR_CHTIF6_Pos (22U) -#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ -#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ -#define DMA_IFCR_CTEIF6_Pos (23U) -#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ -#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ -#define DMA_IFCR_CGIF7_Pos (24U) -#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ -#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ -#define DMA_IFCR_CTCIF7_Pos (25U) -#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ -#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ -#define DMA_IFCR_CHTIF7_Pos (26U) -#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ -#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ -#define DMA_IFCR_CTEIF7_Pos (27U) -#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ -#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ - -/******************* Bit definition for DMA_CCR register ********************/ -#define DMA_CCR_EN_Pos (0U) -#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ -#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ -#define DMA_CCR_TCIE_Pos (1U) -#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ -#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ -#define DMA_CCR_HTIE_Pos (2U) -#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ -#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ -#define DMA_CCR_TEIE_Pos (3U) -#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ -#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ -#define DMA_CCR_DIR_Pos (4U) -#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ -#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ -#define DMA_CCR_CIRC_Pos (5U) -#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ -#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ -#define DMA_CCR_PINC_Pos (6U) -#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ -#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ -#define DMA_CCR_MINC_Pos (7U) -#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ -#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ - -#define DMA_CCR_PSIZE_Pos (8U) -#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ -#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ -#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ - -#define DMA_CCR_MSIZE_Pos (10U) -#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ -#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ -#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ - -#define DMA_CCR_PL_Pos (12U) -#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ -#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ -#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ -#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ - -#define DMA_CCR_MEM2MEM_Pos (14U) -#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ -#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ - -/****************** Bit definition for DMA_CNDTR register *******************/ -#define DMA_CNDTR_NDT_Pos (0U) -#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ -#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CPAR register ********************/ -#define DMA_CPAR_PA_Pos (0U) -#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ -#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CMAR register ********************/ -#define DMA_CMAR_MA_Pos (0U) -#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ -#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ - - -/******************* Bit definition for DMA_CSELR register *******************/ -#define DMA_CSELR_C1S_Pos (0U) -#define DMA_CSELR_C1S_Msk (0xFUL << DMA_CSELR_C1S_Pos) /*!< 0x0000000F */ -#define DMA_CSELR_C1S DMA_CSELR_C1S_Msk /*!< Channel 1 Selection */ -#define DMA_CSELR_C2S_Pos (4U) -#define DMA_CSELR_C2S_Msk (0xFUL << DMA_CSELR_C2S_Pos) /*!< 0x000000F0 */ -#define DMA_CSELR_C2S DMA_CSELR_C2S_Msk /*!< Channel 2 Selection */ -#define DMA_CSELR_C3S_Pos (8U) -#define DMA_CSELR_C3S_Msk (0xFUL << DMA_CSELR_C3S_Pos) /*!< 0x00000F00 */ -#define DMA_CSELR_C3S DMA_CSELR_C3S_Msk /*!< Channel 3 Selection */ -#define DMA_CSELR_C4S_Pos (12U) -#define DMA_CSELR_C4S_Msk (0xFUL << DMA_CSELR_C4S_Pos) /*!< 0x0000F000 */ -#define DMA_CSELR_C4S DMA_CSELR_C4S_Msk /*!< Channel 4 Selection */ -#define DMA_CSELR_C5S_Pos (16U) -#define DMA_CSELR_C5S_Msk (0xFUL << DMA_CSELR_C5S_Pos) /*!< 0x000F0000 */ -#define DMA_CSELR_C5S DMA_CSELR_C5S_Msk /*!< Channel 5 Selection */ -#define DMA_CSELR_C6S_Pos (20U) -#define DMA_CSELR_C6S_Msk (0xFUL << DMA_CSELR_C6S_Pos) /*!< 0x00F00000 */ -#define DMA_CSELR_C6S DMA_CSELR_C6S_Msk /*!< Channel 6 Selection */ -#define DMA_CSELR_C7S_Pos (24U) -#define DMA_CSELR_C7S_Msk (0xFUL << DMA_CSELR_C7S_Pos) /*!< 0x0F000000 */ -#define DMA_CSELR_C7S DMA_CSELR_C7S_Msk /*!< Channel 7 Selection */ - -/******************************************************************************/ -/* */ -/* External Interrupt/Event Controller (EXTI) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for EXTI_IMR register *******************/ -#define EXTI_IMR_IM0_Pos (0U) -#define EXTI_IMR_IM0_Msk (0x1UL << EXTI_IMR_IM0_Pos) /*!< 0x00000001 */ -#define EXTI_IMR_IM0 EXTI_IMR_IM0_Msk /*!< Interrupt Mask on line 0 */ -#define EXTI_IMR_IM1_Pos (1U) -#define EXTI_IMR_IM1_Msk (0x1UL << EXTI_IMR_IM1_Pos) /*!< 0x00000002 */ -#define EXTI_IMR_IM1 EXTI_IMR_IM1_Msk /*!< Interrupt Mask on line 1 */ -#define EXTI_IMR_IM2_Pos (2U) -#define EXTI_IMR_IM2_Msk (0x1UL << EXTI_IMR_IM2_Pos) /*!< 0x00000004 */ -#define EXTI_IMR_IM2 EXTI_IMR_IM2_Msk /*!< Interrupt Mask on line 2 */ -#define EXTI_IMR_IM3_Pos (3U) -#define EXTI_IMR_IM3_Msk (0x1UL << EXTI_IMR_IM3_Pos) /*!< 0x00000008 */ -#define EXTI_IMR_IM3 EXTI_IMR_IM3_Msk /*!< Interrupt Mask on line 3 */ -#define EXTI_IMR_IM4_Pos (4U) -#define EXTI_IMR_IM4_Msk (0x1UL << EXTI_IMR_IM4_Pos) /*!< 0x00000010 */ -#define EXTI_IMR_IM4 EXTI_IMR_IM4_Msk /*!< Interrupt Mask on line 4 */ -#define EXTI_IMR_IM5_Pos (5U) -#define EXTI_IMR_IM5_Msk (0x1UL << EXTI_IMR_IM5_Pos) /*!< 0x00000020 */ -#define EXTI_IMR_IM5 EXTI_IMR_IM5_Msk /*!< Interrupt Mask on line 5 */ -#define EXTI_IMR_IM6_Pos (6U) -#define EXTI_IMR_IM6_Msk (0x1UL << EXTI_IMR_IM6_Pos) /*!< 0x00000040 */ -#define EXTI_IMR_IM6 EXTI_IMR_IM6_Msk /*!< Interrupt Mask on line 6 */ -#define EXTI_IMR_IM7_Pos (7U) -#define EXTI_IMR_IM7_Msk (0x1UL << EXTI_IMR_IM7_Pos) /*!< 0x00000080 */ -#define EXTI_IMR_IM7 EXTI_IMR_IM7_Msk /*!< Interrupt Mask on line 7 */ -#define EXTI_IMR_IM8_Pos (8U) -#define EXTI_IMR_IM8_Msk (0x1UL << EXTI_IMR_IM8_Pos) /*!< 0x00000100 */ -#define EXTI_IMR_IM8 EXTI_IMR_IM8_Msk /*!< Interrupt Mask on line 8 */ -#define EXTI_IMR_IM9_Pos (9U) -#define EXTI_IMR_IM9_Msk (0x1UL << EXTI_IMR_IM9_Pos) /*!< 0x00000200 */ -#define EXTI_IMR_IM9 EXTI_IMR_IM9_Msk /*!< Interrupt Mask on line 9 */ -#define EXTI_IMR_IM10_Pos (10U) -#define EXTI_IMR_IM10_Msk (0x1UL << EXTI_IMR_IM10_Pos) /*!< 0x00000400 */ -#define EXTI_IMR_IM10 EXTI_IMR_IM10_Msk /*!< Interrupt Mask on line 10 */ -#define EXTI_IMR_IM11_Pos (11U) -#define EXTI_IMR_IM11_Msk (0x1UL << EXTI_IMR_IM11_Pos) /*!< 0x00000800 */ -#define EXTI_IMR_IM11 EXTI_IMR_IM11_Msk /*!< Interrupt Mask on line 11 */ -#define EXTI_IMR_IM12_Pos (12U) -#define EXTI_IMR_IM12_Msk (0x1UL << EXTI_IMR_IM12_Pos) /*!< 0x00001000 */ -#define EXTI_IMR_IM12 EXTI_IMR_IM12_Msk /*!< Interrupt Mask on line 12 */ -#define EXTI_IMR_IM13_Pos (13U) -#define EXTI_IMR_IM13_Msk (0x1UL << EXTI_IMR_IM13_Pos) /*!< 0x00002000 */ -#define EXTI_IMR_IM13 EXTI_IMR_IM13_Msk /*!< Interrupt Mask on line 13 */ -#define EXTI_IMR_IM14_Pos (14U) -#define EXTI_IMR_IM14_Msk (0x1UL << EXTI_IMR_IM14_Pos) /*!< 0x00004000 */ -#define EXTI_IMR_IM14 EXTI_IMR_IM14_Msk /*!< Interrupt Mask on line 14 */ -#define EXTI_IMR_IM15_Pos (15U) -#define EXTI_IMR_IM15_Msk (0x1UL << EXTI_IMR_IM15_Pos) /*!< 0x00008000 */ -#define EXTI_IMR_IM15 EXTI_IMR_IM15_Msk /*!< Interrupt Mask on line 15 */ -#define EXTI_IMR_IM16_Pos (16U) -#define EXTI_IMR_IM16_Msk (0x1UL << EXTI_IMR_IM16_Pos) /*!< 0x00010000 */ -#define EXTI_IMR_IM16 EXTI_IMR_IM16_Msk /*!< Interrupt Mask on line 16 */ -#define EXTI_IMR_IM17_Pos (17U) -#define EXTI_IMR_IM17_Msk (0x1UL << EXTI_IMR_IM17_Pos) /*!< 0x00020000 */ -#define EXTI_IMR_IM17 EXTI_IMR_IM17_Msk /*!< Interrupt Mask on line 17 */ -#define EXTI_IMR_IM18_Pos (18U) -#define EXTI_IMR_IM18_Msk (0x1UL << EXTI_IMR_IM18_Pos) /*!< 0x00040000 */ -#define EXTI_IMR_IM18 EXTI_IMR_IM18_Msk /*!< Interrupt Mask on line 18 */ -#define EXTI_IMR_IM19_Pos (19U) -#define EXTI_IMR_IM19_Msk (0x1UL << EXTI_IMR_IM19_Pos) /*!< 0x00080000 */ -#define EXTI_IMR_IM19 EXTI_IMR_IM19_Msk /*!< Interrupt Mask on line 19 */ -#define EXTI_IMR_IM20_Pos (20U) -#define EXTI_IMR_IM20_Msk (0x1UL << EXTI_IMR_IM20_Pos) /*!< 0x00100000 */ -#define EXTI_IMR_IM20 EXTI_IMR_IM20_Msk /*!< Interrupt Mask on line 20 */ -#define EXTI_IMR_IM21_Pos (21U) -#define EXTI_IMR_IM21_Msk (0x1UL << EXTI_IMR_IM21_Pos) /*!< 0x00200000 */ -#define EXTI_IMR_IM21 EXTI_IMR_IM21_Msk /*!< Interrupt Mask on line 21 */ -#define EXTI_IMR_IM22_Pos (22U) -#define EXTI_IMR_IM22_Msk (0x1UL << EXTI_IMR_IM22_Pos) /*!< 0x00400000 */ -#define EXTI_IMR_IM22 EXTI_IMR_IM22_Msk /*!< Interrupt Mask on line 22 */ -#define EXTI_IMR_IM23_Pos (23U) -#define EXTI_IMR_IM23_Msk (0x1UL << EXTI_IMR_IM23_Pos) /*!< 0x00800000 */ -#define EXTI_IMR_IM23 EXTI_IMR_IM23_Msk /*!< Interrupt Mask on line 23 */ -#define EXTI_IMR_IM25_Pos (25U) -#define EXTI_IMR_IM25_Msk (0x1UL << EXTI_IMR_IM25_Pos) /*!< 0x02000000 */ -#define EXTI_IMR_IM25 EXTI_IMR_IM25_Msk /*!< Interrupt Mask on line 25 */ -#define EXTI_IMR_IM26_Pos (26U) -#define EXTI_IMR_IM26_Msk (0x1UL << EXTI_IMR_IM26_Pos) /*!< 0x04000000 */ -#define EXTI_IMR_IM26 EXTI_IMR_IM26_Msk /*!< Interrupt Mask on line 26 */ -#define EXTI_IMR_IM28_Pos (28U) -#define EXTI_IMR_IM28_Msk (0x1UL << EXTI_IMR_IM28_Pos) /*!< 0x10000000 */ -#define EXTI_IMR_IM28 EXTI_IMR_IM28_Msk /*!< Interrupt Mask on line 28 */ -#define EXTI_IMR_IM29_Pos (29U) -#define EXTI_IMR_IM29_Msk (0x1UL << EXTI_IMR_IM29_Pos) /*!< 0x20000000 */ -#define EXTI_IMR_IM29 EXTI_IMR_IM29_Msk /*!< Interrupt Mask on line 29 */ - -#define EXTI_IMR_IM_Pos (0U) -#define EXTI_IMR_IM_Msk (0x36FFFFFFUL << EXTI_IMR_IM_Pos) /*!< 0x36FFFFFF */ -#define EXTI_IMR_IM EXTI_IMR_IM_Msk /*!< Interrupt Mask All */ - -/****************** Bit definition for EXTI_EMR register ********************/ -#define EXTI_EMR_EM0_Pos (0U) -#define EXTI_EMR_EM0_Msk (0x1UL << EXTI_EMR_EM0_Pos) /*!< 0x00000001 */ -#define EXTI_EMR_EM0 EXTI_EMR_EM0_Msk /*!< Event Mask on line 0 */ -#define EXTI_EMR_EM1_Pos (1U) -#define EXTI_EMR_EM1_Msk (0x1UL << EXTI_EMR_EM1_Pos) /*!< 0x00000002 */ -#define EXTI_EMR_EM1 EXTI_EMR_EM1_Msk /*!< Event Mask on line 1 */ -#define EXTI_EMR_EM2_Pos (2U) -#define EXTI_EMR_EM2_Msk (0x1UL << EXTI_EMR_EM2_Pos) /*!< 0x00000004 */ -#define EXTI_EMR_EM2 EXTI_EMR_EM2_Msk /*!< Event Mask on line 2 */ -#define EXTI_EMR_EM3_Pos (3U) -#define EXTI_EMR_EM3_Msk (0x1UL << EXTI_EMR_EM3_Pos) /*!< 0x00000008 */ -#define EXTI_EMR_EM3 EXTI_EMR_EM3_Msk /*!< Event Mask on line 3 */ -#define EXTI_EMR_EM4_Pos (4U) -#define EXTI_EMR_EM4_Msk (0x1UL << EXTI_EMR_EM4_Pos) /*!< 0x00000010 */ -#define EXTI_EMR_EM4 EXTI_EMR_EM4_Msk /*!< Event Mask on line 4 */ -#define EXTI_EMR_EM5_Pos (5U) -#define EXTI_EMR_EM5_Msk (0x1UL << EXTI_EMR_EM5_Pos) /*!< 0x00000020 */ -#define EXTI_EMR_EM5 EXTI_EMR_EM5_Msk /*!< Event Mask on line 5 */ -#define EXTI_EMR_EM6_Pos (6U) -#define EXTI_EMR_EM6_Msk (0x1UL << EXTI_EMR_EM6_Pos) /*!< 0x00000040 */ -#define EXTI_EMR_EM6 EXTI_EMR_EM6_Msk /*!< Event Mask on line 6 */ -#define EXTI_EMR_EM7_Pos (7U) -#define EXTI_EMR_EM7_Msk (0x1UL << EXTI_EMR_EM7_Pos) /*!< 0x00000080 */ -#define EXTI_EMR_EM7 EXTI_EMR_EM7_Msk /*!< Event Mask on line 7 */ -#define EXTI_EMR_EM8_Pos (8U) -#define EXTI_EMR_EM8_Msk (0x1UL << EXTI_EMR_EM8_Pos) /*!< 0x00000100 */ -#define EXTI_EMR_EM8 EXTI_EMR_EM8_Msk /*!< Event Mask on line 8 */ -#define EXTI_EMR_EM9_Pos (9U) -#define EXTI_EMR_EM9_Msk (0x1UL << EXTI_EMR_EM9_Pos) /*!< 0x00000200 */ -#define EXTI_EMR_EM9 EXTI_EMR_EM9_Msk /*!< Event Mask on line 9 */ -#define EXTI_EMR_EM10_Pos (10U) -#define EXTI_EMR_EM10_Msk (0x1UL << EXTI_EMR_EM10_Pos) /*!< 0x00000400 */ -#define EXTI_EMR_EM10 EXTI_EMR_EM10_Msk /*!< Event Mask on line 10 */ -#define EXTI_EMR_EM11_Pos (11U) -#define EXTI_EMR_EM11_Msk (0x1UL << EXTI_EMR_EM11_Pos) /*!< 0x00000800 */ -#define EXTI_EMR_EM11 EXTI_EMR_EM11_Msk /*!< Event Mask on line 11 */ -#define EXTI_EMR_EM12_Pos (12U) -#define EXTI_EMR_EM12_Msk (0x1UL << EXTI_EMR_EM12_Pos) /*!< 0x00001000 */ -#define EXTI_EMR_EM12 EXTI_EMR_EM12_Msk /*!< Event Mask on line 12 */ -#define EXTI_EMR_EM13_Pos (13U) -#define EXTI_EMR_EM13_Msk (0x1UL << EXTI_EMR_EM13_Pos) /*!< 0x00002000 */ -#define EXTI_EMR_EM13 EXTI_EMR_EM13_Msk /*!< Event Mask on line 13 */ -#define EXTI_EMR_EM14_Pos (14U) -#define EXTI_EMR_EM14_Msk (0x1UL << EXTI_EMR_EM14_Pos) /*!< 0x00004000 */ -#define EXTI_EMR_EM14 EXTI_EMR_EM14_Msk /*!< Event Mask on line 14 */ -#define EXTI_EMR_EM15_Pos (15U) -#define EXTI_EMR_EM15_Msk (0x1UL << EXTI_EMR_EM15_Pos) /*!< 0x00008000 */ -#define EXTI_EMR_EM15 EXTI_EMR_EM15_Msk /*!< Event Mask on line 15 */ -#define EXTI_EMR_EM16_Pos (16U) -#define EXTI_EMR_EM16_Msk (0x1UL << EXTI_EMR_EM16_Pos) /*!< 0x00010000 */ -#define EXTI_EMR_EM16 EXTI_EMR_EM16_Msk /*!< Event Mask on line 16 */ -#define EXTI_EMR_EM17_Pos (17U) -#define EXTI_EMR_EM17_Msk (0x1UL << EXTI_EMR_EM17_Pos) /*!< 0x00020000 */ -#define EXTI_EMR_EM17 EXTI_EMR_EM17_Msk /*!< Event Mask on line 17 */ -#define EXTI_EMR_EM18_Pos (18U) -#define EXTI_EMR_EM18_Msk (0x1UL << EXTI_EMR_EM18_Pos) /*!< 0x00040000 */ -#define EXTI_EMR_EM18 EXTI_EMR_EM18_Msk /*!< Event Mask on line 18 */ -#define EXTI_EMR_EM19_Pos (19U) -#define EXTI_EMR_EM19_Msk (0x1UL << EXTI_EMR_EM19_Pos) /*!< 0x00080000 */ -#define EXTI_EMR_EM19 EXTI_EMR_EM19_Msk /*!< Event Mask on line 19 */ -#define EXTI_EMR_EM20_Pos (20U) -#define EXTI_EMR_EM20_Msk (0x1UL << EXTI_EMR_EM20_Pos) /*!< 0x00100000 */ -#define EXTI_EMR_EM20 EXTI_EMR_EM20_Msk /*!< Event Mask on line 20 */ -#define EXTI_EMR_EM21_Pos (21U) -#define EXTI_EMR_EM21_Msk (0x1UL << EXTI_EMR_EM21_Pos) /*!< 0x00200000 */ -#define EXTI_EMR_EM21 EXTI_EMR_EM21_Msk /*!< Event Mask on line 21 */ -#define EXTI_EMR_EM22_Pos (22U) -#define EXTI_EMR_EM22_Msk (0x1UL << EXTI_EMR_EM22_Pos) /*!< 0x00400000 */ -#define EXTI_EMR_EM22 EXTI_EMR_EM22_Msk /*!< Event Mask on line 22 */ -#define EXTI_EMR_EM23_Pos (23U) -#define EXTI_EMR_EM23_Msk (0x1UL << EXTI_EMR_EM23_Pos) /*!< 0x00800000 */ -#define EXTI_EMR_EM23 EXTI_EMR_EM23_Msk /*!< Event Mask on line 23 */ -#define EXTI_EMR_EM25_Pos (25U) -#define EXTI_EMR_EM25_Msk (0x1UL << EXTI_EMR_EM25_Pos) /*!< 0x02000000 */ -#define EXTI_EMR_EM25 EXTI_EMR_EM25_Msk /*!< Event Mask on line 25 */ -#define EXTI_EMR_EM26_Pos (26U) -#define EXTI_EMR_EM26_Msk (0x1UL << EXTI_EMR_EM26_Pos) /*!< 0x04000000 */ -#define EXTI_EMR_EM26 EXTI_EMR_EM26_Msk /*!< Event Mask on line 26 */ -#define EXTI_EMR_EM28_Pos (28U) -#define EXTI_EMR_EM28_Msk (0x1UL << EXTI_EMR_EM28_Pos) /*!< 0x10000000 */ -#define EXTI_EMR_EM28 EXTI_EMR_EM28_Msk /*!< Event Mask on line 28 */ -#define EXTI_EMR_EM29_Pos (29U) -#define EXTI_EMR_EM29_Msk (0x1UL << EXTI_EMR_EM29_Pos) /*!< 0x20000000 */ -#define EXTI_EMR_EM29 EXTI_EMR_EM29_Msk /*!< Event Mask on line 29 */ - -/******************* Bit definition for EXTI_RTSR register ******************/ -#define EXTI_RTSR_RT0_Pos (0U) -#define EXTI_RTSR_RT0_Msk (0x1UL << EXTI_RTSR_RT0_Pos) /*!< 0x00000001 */ -#define EXTI_RTSR_RT0 EXTI_RTSR_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ -#define EXTI_RTSR_RT1_Pos (1U) -#define EXTI_RTSR_RT1_Msk (0x1UL << EXTI_RTSR_RT1_Pos) /*!< 0x00000002 */ -#define EXTI_RTSR_RT1 EXTI_RTSR_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ -#define EXTI_RTSR_RT2_Pos (2U) -#define EXTI_RTSR_RT2_Msk (0x1UL << EXTI_RTSR_RT2_Pos) /*!< 0x00000004 */ -#define EXTI_RTSR_RT2 EXTI_RTSR_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ -#define EXTI_RTSR_RT3_Pos (3U) -#define EXTI_RTSR_RT3_Msk (0x1UL << EXTI_RTSR_RT3_Pos) /*!< 0x00000008 */ -#define EXTI_RTSR_RT3 EXTI_RTSR_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ -#define EXTI_RTSR_RT4_Pos (4U) -#define EXTI_RTSR_RT4_Msk (0x1UL << EXTI_RTSR_RT4_Pos) /*!< 0x00000010 */ -#define EXTI_RTSR_RT4 EXTI_RTSR_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ -#define EXTI_RTSR_RT5_Pos (5U) -#define EXTI_RTSR_RT5_Msk (0x1UL << EXTI_RTSR_RT5_Pos) /*!< 0x00000020 */ -#define EXTI_RTSR_RT5 EXTI_RTSR_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ -#define EXTI_RTSR_RT6_Pos (6U) -#define EXTI_RTSR_RT6_Msk (0x1UL << EXTI_RTSR_RT6_Pos) /*!< 0x00000040 */ -#define EXTI_RTSR_RT6 EXTI_RTSR_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ -#define EXTI_RTSR_RT7_Pos (7U) -#define EXTI_RTSR_RT7_Msk (0x1UL << EXTI_RTSR_RT7_Pos) /*!< 0x00000080 */ -#define EXTI_RTSR_RT7 EXTI_RTSR_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ -#define EXTI_RTSR_RT8_Pos (8U) -#define EXTI_RTSR_RT8_Msk (0x1UL << EXTI_RTSR_RT8_Pos) /*!< 0x00000100 */ -#define EXTI_RTSR_RT8 EXTI_RTSR_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ -#define EXTI_RTSR_RT9_Pos (9U) -#define EXTI_RTSR_RT9_Msk (0x1UL << EXTI_RTSR_RT9_Pos) /*!< 0x00000200 */ -#define EXTI_RTSR_RT9 EXTI_RTSR_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ -#define EXTI_RTSR_RT10_Pos (10U) -#define EXTI_RTSR_RT10_Msk (0x1UL << EXTI_RTSR_RT10_Pos) /*!< 0x00000400 */ -#define EXTI_RTSR_RT10 EXTI_RTSR_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ -#define EXTI_RTSR_RT11_Pos (11U) -#define EXTI_RTSR_RT11_Msk (0x1UL << EXTI_RTSR_RT11_Pos) /*!< 0x00000800 */ -#define EXTI_RTSR_RT11 EXTI_RTSR_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ -#define EXTI_RTSR_RT12_Pos (12U) -#define EXTI_RTSR_RT12_Msk (0x1UL << EXTI_RTSR_RT12_Pos) /*!< 0x00001000 */ -#define EXTI_RTSR_RT12 EXTI_RTSR_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ -#define EXTI_RTSR_RT13_Pos (13U) -#define EXTI_RTSR_RT13_Msk (0x1UL << EXTI_RTSR_RT13_Pos) /*!< 0x00002000 */ -#define EXTI_RTSR_RT13 EXTI_RTSR_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ -#define EXTI_RTSR_RT14_Pos (14U) -#define EXTI_RTSR_RT14_Msk (0x1UL << EXTI_RTSR_RT14_Pos) /*!< 0x00004000 */ -#define EXTI_RTSR_RT14 EXTI_RTSR_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ -#define EXTI_RTSR_RT15_Pos (15U) -#define EXTI_RTSR_RT15_Msk (0x1UL << EXTI_RTSR_RT15_Pos) /*!< 0x00008000 */ -#define EXTI_RTSR_RT15 EXTI_RTSR_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ -#define EXTI_RTSR_RT16_Pos (16U) -#define EXTI_RTSR_RT16_Msk (0x1UL << EXTI_RTSR_RT16_Pos) /*!< 0x00010000 */ -#define EXTI_RTSR_RT16 EXTI_RTSR_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ -#define EXTI_RTSR_RT17_Pos (17U) -#define EXTI_RTSR_RT17_Msk (0x1UL << EXTI_RTSR_RT17_Pos) /*!< 0x00020000 */ -#define EXTI_RTSR_RT17 EXTI_RTSR_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ -#define EXTI_RTSR_RT19_Pos (19U) -#define EXTI_RTSR_RT19_Msk (0x1UL << EXTI_RTSR_RT19_Pos) /*!< 0x00080000 */ -#define EXTI_RTSR_RT19 EXTI_RTSR_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ -#define EXTI_RTSR_RT20_Pos (20U) -#define EXTI_RTSR_RT20_Msk (0x1UL << EXTI_RTSR_RT20_Pos) /*!< 0x00100000 */ -#define EXTI_RTSR_RT20 EXTI_RTSR_RT20_Msk /*!< Rising trigger event configuration bit of line 20 */ -#define EXTI_RTSR_RT21_Pos (21U) -#define EXTI_RTSR_RT21_Msk (0x1UL << EXTI_RTSR_RT21_Pos) /*!< 0x00200000 */ -#define EXTI_RTSR_RT21 EXTI_RTSR_RT21_Msk /*!< Rising trigger event configuration bit of line 21 */ -#define EXTI_RTSR_RT22_Pos (22U) -#define EXTI_RTSR_RT22_Msk (0x1UL << EXTI_RTSR_RT22_Pos) /*!< 0x00400000 */ -#define EXTI_RTSR_RT22 EXTI_RTSR_RT22_Msk /*!< Rising trigger event configuration bit of line 22 */ - -/* Legacy defines */ -#define EXTI_RTSR_TR0 EXTI_RTSR_RT0 -#define EXTI_RTSR_TR1 EXTI_RTSR_RT1 -#define EXTI_RTSR_TR2 EXTI_RTSR_RT2 -#define EXTI_RTSR_TR3 EXTI_RTSR_RT3 -#define EXTI_RTSR_TR4 EXTI_RTSR_RT4 -#define EXTI_RTSR_TR5 EXTI_RTSR_RT5 -#define EXTI_RTSR_TR6 EXTI_RTSR_RT6 -#define EXTI_RTSR_TR7 EXTI_RTSR_RT7 -#define EXTI_RTSR_TR8 EXTI_RTSR_RT8 -#define EXTI_RTSR_TR9 EXTI_RTSR_RT9 -#define EXTI_RTSR_TR10 EXTI_RTSR_RT10 -#define EXTI_RTSR_TR11 EXTI_RTSR_RT11 -#define EXTI_RTSR_TR12 EXTI_RTSR_RT12 -#define EXTI_RTSR_TR13 EXTI_RTSR_RT13 -#define EXTI_RTSR_TR14 EXTI_RTSR_RT14 -#define EXTI_RTSR_TR15 EXTI_RTSR_RT15 -#define EXTI_RTSR_TR16 EXTI_RTSR_RT16 -#define EXTI_RTSR_TR17 EXTI_RTSR_RT17 -#define EXTI_RTSR_TR19 EXTI_RTSR_RT19 -#define EXTI_RTSR_TR20 EXTI_RTSR_RT20 -#define EXTI_RTSR_TR21 EXTI_RTSR_RT21 -#define EXTI_RTSR_TR22 EXTI_RTSR_RT22 - -/******************* Bit definition for EXTI_FTSR register *******************/ -#define EXTI_FTSR_FT0_Pos (0U) -#define EXTI_FTSR_FT0_Msk (0x1UL << EXTI_FTSR_FT0_Pos) /*!< 0x00000001 */ -#define EXTI_FTSR_FT0 EXTI_FTSR_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ -#define EXTI_FTSR_FT1_Pos (1U) -#define EXTI_FTSR_FT1_Msk (0x1UL << EXTI_FTSR_FT1_Pos) /*!< 0x00000002 */ -#define EXTI_FTSR_FT1 EXTI_FTSR_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ -#define EXTI_FTSR_FT2_Pos (2U) -#define EXTI_FTSR_FT2_Msk (0x1UL << EXTI_FTSR_FT2_Pos) /*!< 0x00000004 */ -#define EXTI_FTSR_FT2 EXTI_FTSR_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ -#define EXTI_FTSR_FT3_Pos (3U) -#define EXTI_FTSR_FT3_Msk (0x1UL << EXTI_FTSR_FT3_Pos) /*!< 0x00000008 */ -#define EXTI_FTSR_FT3 EXTI_FTSR_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ -#define EXTI_FTSR_FT4_Pos (4U) -#define EXTI_FTSR_FT4_Msk (0x1UL << EXTI_FTSR_FT4_Pos) /*!< 0x00000010 */ -#define EXTI_FTSR_FT4 EXTI_FTSR_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ -#define EXTI_FTSR_FT5_Pos (5U) -#define EXTI_FTSR_FT5_Msk (0x1UL << EXTI_FTSR_FT5_Pos) /*!< 0x00000020 */ -#define EXTI_FTSR_FT5 EXTI_FTSR_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ -#define EXTI_FTSR_FT6_Pos (6U) -#define EXTI_FTSR_FT6_Msk (0x1UL << EXTI_FTSR_FT6_Pos) /*!< 0x00000040 */ -#define EXTI_FTSR_FT6 EXTI_FTSR_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ -#define EXTI_FTSR_FT7_Pos (7U) -#define EXTI_FTSR_FT7_Msk (0x1UL << EXTI_FTSR_FT7_Pos) /*!< 0x00000080 */ -#define EXTI_FTSR_FT7 EXTI_FTSR_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ -#define EXTI_FTSR_FT8_Pos (8U) -#define EXTI_FTSR_FT8_Msk (0x1UL << EXTI_FTSR_FT8_Pos) /*!< 0x00000100 */ -#define EXTI_FTSR_FT8 EXTI_FTSR_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ -#define EXTI_FTSR_FT9_Pos (9U) -#define EXTI_FTSR_FT9_Msk (0x1UL << EXTI_FTSR_FT9_Pos) /*!< 0x00000200 */ -#define EXTI_FTSR_FT9 EXTI_FTSR_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ -#define EXTI_FTSR_FT10_Pos (10U) -#define EXTI_FTSR_FT10_Msk (0x1UL << EXTI_FTSR_FT10_Pos) /*!< 0x00000400 */ -#define EXTI_FTSR_FT10 EXTI_FTSR_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ -#define EXTI_FTSR_FT11_Pos (11U) -#define EXTI_FTSR_FT11_Msk (0x1UL << EXTI_FTSR_FT11_Pos) /*!< 0x00000800 */ -#define EXTI_FTSR_FT11 EXTI_FTSR_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ -#define EXTI_FTSR_FT12_Pos (12U) -#define EXTI_FTSR_FT12_Msk (0x1UL << EXTI_FTSR_FT12_Pos) /*!< 0x00001000 */ -#define EXTI_FTSR_FT12 EXTI_FTSR_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ -#define EXTI_FTSR_FT13_Pos (13U) -#define EXTI_FTSR_FT13_Msk (0x1UL << EXTI_FTSR_FT13_Pos) /*!< 0x00002000 */ -#define EXTI_FTSR_FT13 EXTI_FTSR_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ -#define EXTI_FTSR_FT14_Pos (14U) -#define EXTI_FTSR_FT14_Msk (0x1UL << EXTI_FTSR_FT14_Pos) /*!< 0x00004000 */ -#define EXTI_FTSR_FT14 EXTI_FTSR_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ -#define EXTI_FTSR_FT15_Pos (15U) -#define EXTI_FTSR_FT15_Msk (0x1UL << EXTI_FTSR_FT15_Pos) /*!< 0x00008000 */ -#define EXTI_FTSR_FT15 EXTI_FTSR_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ -#define EXTI_FTSR_FT16_Pos (16U) -#define EXTI_FTSR_FT16_Msk (0x1UL << EXTI_FTSR_FT16_Pos) /*!< 0x00010000 */ -#define EXTI_FTSR_FT16 EXTI_FTSR_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ -#define EXTI_FTSR_FT17_Pos (17U) -#define EXTI_FTSR_FT17_Msk (0x1UL << EXTI_FTSR_FT17_Pos) /*!< 0x00020000 */ -#define EXTI_FTSR_FT17 EXTI_FTSR_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ -#define EXTI_FTSR_FT19_Pos (19U) -#define EXTI_FTSR_FT19_Msk (0x1UL << EXTI_FTSR_FT19_Pos) /*!< 0x00080000 */ -#define EXTI_FTSR_FT19 EXTI_FTSR_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ -#define EXTI_FTSR_FT20_Pos (20U) -#define EXTI_FTSR_FT20_Msk (0x1UL << EXTI_FTSR_FT20_Pos) /*!< 0x00100000 */ -#define EXTI_FTSR_FT20 EXTI_FTSR_FT20_Msk /*!< Falling trigger event configuration bit of line 20 */ -#define EXTI_FTSR_FT21_Pos (21U) -#define EXTI_FTSR_FT21_Msk (0x1UL << EXTI_FTSR_FT21_Pos) /*!< 0x00200000 */ -#define EXTI_FTSR_FT21 EXTI_FTSR_FT21_Msk /*!< Falling trigger event configuration bit of line 21 */ -#define EXTI_FTSR_FT22_Pos (22U) -#define EXTI_FTSR_FT22_Msk (0x1UL << EXTI_FTSR_FT22_Pos) /*!< 0x00400000 */ -#define EXTI_FTSR_FT22 EXTI_FTSR_FT22_Msk /*!< Falling trigger event configuration bit of line 22 */ - -/* Legacy defines */ -#define EXTI_FTSR_TR0 EXTI_FTSR_FT0 -#define EXTI_FTSR_TR1 EXTI_FTSR_FT1 -#define EXTI_FTSR_TR2 EXTI_FTSR_FT2 -#define EXTI_FTSR_TR3 EXTI_FTSR_FT3 -#define EXTI_FTSR_TR4 EXTI_FTSR_FT4 -#define EXTI_FTSR_TR5 EXTI_FTSR_FT5 -#define EXTI_FTSR_TR6 EXTI_FTSR_FT6 -#define EXTI_FTSR_TR7 EXTI_FTSR_FT7 -#define EXTI_FTSR_TR8 EXTI_FTSR_FT8 -#define EXTI_FTSR_TR9 EXTI_FTSR_FT9 -#define EXTI_FTSR_TR10 EXTI_FTSR_FT10 -#define EXTI_FTSR_TR11 EXTI_FTSR_FT11 -#define EXTI_FTSR_TR12 EXTI_FTSR_FT12 -#define EXTI_FTSR_TR13 EXTI_FTSR_FT13 -#define EXTI_FTSR_TR14 EXTI_FTSR_FT14 -#define EXTI_FTSR_TR15 EXTI_FTSR_FT15 -#define EXTI_FTSR_TR16 EXTI_FTSR_FT16 -#define EXTI_FTSR_TR17 EXTI_FTSR_FT17 -#define EXTI_FTSR_TR19 EXTI_FTSR_FT19 -#define EXTI_FTSR_TR20 EXTI_FTSR_FT20 -#define EXTI_FTSR_TR21 EXTI_FTSR_FT21 -#define EXTI_FTSR_TR22 EXTI_FTSR_FT22 - -/******************* Bit definition for EXTI_SWIER register *******************/ -#define EXTI_SWIER_SWI0_Pos (0U) -#define EXTI_SWIER_SWI0_Msk (0x1UL << EXTI_SWIER_SWI0_Pos) /*!< 0x00000001 */ -#define EXTI_SWIER_SWI0 EXTI_SWIER_SWI0_Msk /*!< Software Interrupt on line 0 */ -#define EXTI_SWIER_SWI1_Pos (1U) -#define EXTI_SWIER_SWI1_Msk (0x1UL << EXTI_SWIER_SWI1_Pos) /*!< 0x00000002 */ -#define EXTI_SWIER_SWI1 EXTI_SWIER_SWI1_Msk /*!< Software Interrupt on line 1 */ -#define EXTI_SWIER_SWI2_Pos (2U) -#define EXTI_SWIER_SWI2_Msk (0x1UL << EXTI_SWIER_SWI2_Pos) /*!< 0x00000004 */ -#define EXTI_SWIER_SWI2 EXTI_SWIER_SWI2_Msk /*!< Software Interrupt on line 2 */ -#define EXTI_SWIER_SWI3_Pos (3U) -#define EXTI_SWIER_SWI3_Msk (0x1UL << EXTI_SWIER_SWI3_Pos) /*!< 0x00000008 */ -#define EXTI_SWIER_SWI3 EXTI_SWIER_SWI3_Msk /*!< Software Interrupt on line 3 */ -#define EXTI_SWIER_SWI4_Pos (4U) -#define EXTI_SWIER_SWI4_Msk (0x1UL << EXTI_SWIER_SWI4_Pos) /*!< 0x00000010 */ -#define EXTI_SWIER_SWI4 EXTI_SWIER_SWI4_Msk /*!< Software Interrupt on line 4 */ -#define EXTI_SWIER_SWI5_Pos (5U) -#define EXTI_SWIER_SWI5_Msk (0x1UL << EXTI_SWIER_SWI5_Pos) /*!< 0x00000020 */ -#define EXTI_SWIER_SWI5 EXTI_SWIER_SWI5_Msk /*!< Software Interrupt on line 5 */ -#define EXTI_SWIER_SWI6_Pos (6U) -#define EXTI_SWIER_SWI6_Msk (0x1UL << EXTI_SWIER_SWI6_Pos) /*!< 0x00000040 */ -#define EXTI_SWIER_SWI6 EXTI_SWIER_SWI6_Msk /*!< Software Interrupt on line 6 */ -#define EXTI_SWIER_SWI7_Pos (7U) -#define EXTI_SWIER_SWI7_Msk (0x1UL << EXTI_SWIER_SWI7_Pos) /*!< 0x00000080 */ -#define EXTI_SWIER_SWI7 EXTI_SWIER_SWI7_Msk /*!< Software Interrupt on line 7 */ -#define EXTI_SWIER_SWI8_Pos (8U) -#define EXTI_SWIER_SWI8_Msk (0x1UL << EXTI_SWIER_SWI8_Pos) /*!< 0x00000100 */ -#define EXTI_SWIER_SWI8 EXTI_SWIER_SWI8_Msk /*!< Software Interrupt on line 8 */ -#define EXTI_SWIER_SWI9_Pos (9U) -#define EXTI_SWIER_SWI9_Msk (0x1UL << EXTI_SWIER_SWI9_Pos) /*!< 0x00000200 */ -#define EXTI_SWIER_SWI9 EXTI_SWIER_SWI9_Msk /*!< Software Interrupt on line 9 */ -#define EXTI_SWIER_SWI10_Pos (10U) -#define EXTI_SWIER_SWI10_Msk (0x1UL << EXTI_SWIER_SWI10_Pos) /*!< 0x00000400 */ -#define EXTI_SWIER_SWI10 EXTI_SWIER_SWI10_Msk /*!< Software Interrupt on line 10 */ -#define EXTI_SWIER_SWI11_Pos (11U) -#define EXTI_SWIER_SWI11_Msk (0x1UL << EXTI_SWIER_SWI11_Pos) /*!< 0x00000800 */ -#define EXTI_SWIER_SWI11 EXTI_SWIER_SWI11_Msk /*!< Software Interrupt on line 11 */ -#define EXTI_SWIER_SWI12_Pos (12U) -#define EXTI_SWIER_SWI12_Msk (0x1UL << EXTI_SWIER_SWI12_Pos) /*!< 0x00001000 */ -#define EXTI_SWIER_SWI12 EXTI_SWIER_SWI12_Msk /*!< Software Interrupt on line 12 */ -#define EXTI_SWIER_SWI13_Pos (13U) -#define EXTI_SWIER_SWI13_Msk (0x1UL << EXTI_SWIER_SWI13_Pos) /*!< 0x00002000 */ -#define EXTI_SWIER_SWI13 EXTI_SWIER_SWI13_Msk /*!< Software Interrupt on line 13 */ -#define EXTI_SWIER_SWI14_Pos (14U) -#define EXTI_SWIER_SWI14_Msk (0x1UL << EXTI_SWIER_SWI14_Pos) /*!< 0x00004000 */ -#define EXTI_SWIER_SWI14 EXTI_SWIER_SWI14_Msk /*!< Software Interrupt on line 14 */ -#define EXTI_SWIER_SWI15_Pos (15U) -#define EXTI_SWIER_SWI15_Msk (0x1UL << EXTI_SWIER_SWI15_Pos) /*!< 0x00008000 */ -#define EXTI_SWIER_SWI15 EXTI_SWIER_SWI15_Msk /*!< Software Interrupt on line 15 */ -#define EXTI_SWIER_SWI16_Pos (16U) -#define EXTI_SWIER_SWI16_Msk (0x1UL << EXTI_SWIER_SWI16_Pos) /*!< 0x00010000 */ -#define EXTI_SWIER_SWI16 EXTI_SWIER_SWI16_Msk /*!< Software Interrupt on line 16 */ -#define EXTI_SWIER_SWI17_Pos (17U) -#define EXTI_SWIER_SWI17_Msk (0x1UL << EXTI_SWIER_SWI17_Pos) /*!< 0x00020000 */ -#define EXTI_SWIER_SWI17 EXTI_SWIER_SWI17_Msk /*!< Software Interrupt on line 17 */ -#define EXTI_SWIER_SWI19_Pos (19U) -#define EXTI_SWIER_SWI19_Msk (0x1UL << EXTI_SWIER_SWI19_Pos) /*!< 0x00080000 */ -#define EXTI_SWIER_SWI19 EXTI_SWIER_SWI19_Msk /*!< Software Interrupt on line 19 */ -#define EXTI_SWIER_SWI20_Pos (20U) -#define EXTI_SWIER_SWI20_Msk (0x1UL << EXTI_SWIER_SWI20_Pos) /*!< 0x00100000 */ -#define EXTI_SWIER_SWI20 EXTI_SWIER_SWI20_Msk /*!< Software Interrupt on line 20 */ -#define EXTI_SWIER_SWI21_Pos (21U) -#define EXTI_SWIER_SWI21_Msk (0x1UL << EXTI_SWIER_SWI21_Pos) /*!< 0x00200000 */ -#define EXTI_SWIER_SWI21 EXTI_SWIER_SWI21_Msk /*!< Software Interrupt on line 21 */ -#define EXTI_SWIER_SWI22_Pos (22U) -#define EXTI_SWIER_SWI22_Msk (0x1UL << EXTI_SWIER_SWI22_Pos) /*!< 0x00400000 */ -#define EXTI_SWIER_SWI22 EXTI_SWIER_SWI22_Msk /*!< Software Interrupt on line 22 */ - -/* Legacy defines */ -#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWI0 -#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWI1 -#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWI2 -#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWI3 -#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWI4 -#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWI5 -#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWI6 -#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWI7 -#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWI8 -#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWI9 -#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWI10 -#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWI11 -#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWI12 -#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWI13 -#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWI14 -#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWI15 -#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWI16 -#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWI17 -#define EXTI_SWIER_SWIER19 EXTI_SWIER_SWI19 -#define EXTI_SWIER_SWIER20 EXTI_SWIER_SWI20 -#define EXTI_SWIER_SWIER21 EXTI_SWIER_SWI21 -#define EXTI_SWIER_SWIER22 EXTI_SWIER_SWI22 - -/****************** Bit definition for EXTI_PR register *********************/ -#define EXTI_PR_PIF0_Pos (0U) -#define EXTI_PR_PIF0_Msk (0x1UL << EXTI_PR_PIF0_Pos) /*!< 0x00000001 */ -#define EXTI_PR_PIF0 EXTI_PR_PIF0_Msk /*!< Pending bit 0 */ -#define EXTI_PR_PIF1_Pos (1U) -#define EXTI_PR_PIF1_Msk (0x1UL << EXTI_PR_PIF1_Pos) /*!< 0x00000002 */ -#define EXTI_PR_PIF1 EXTI_PR_PIF1_Msk /*!< Pending bit 1 */ -#define EXTI_PR_PIF2_Pos (2U) -#define EXTI_PR_PIF2_Msk (0x1UL << EXTI_PR_PIF2_Pos) /*!< 0x00000004 */ -#define EXTI_PR_PIF2 EXTI_PR_PIF2_Msk /*!< Pending bit 2 */ -#define EXTI_PR_PIF3_Pos (3U) -#define EXTI_PR_PIF3_Msk (0x1UL << EXTI_PR_PIF3_Pos) /*!< 0x00000008 */ -#define EXTI_PR_PIF3 EXTI_PR_PIF3_Msk /*!< Pending bit 3 */ -#define EXTI_PR_PIF4_Pos (4U) -#define EXTI_PR_PIF4_Msk (0x1UL << EXTI_PR_PIF4_Pos) /*!< 0x00000010 */ -#define EXTI_PR_PIF4 EXTI_PR_PIF4_Msk /*!< Pending bit 4 */ -#define EXTI_PR_PIF5_Pos (5U) -#define EXTI_PR_PIF5_Msk (0x1UL << EXTI_PR_PIF5_Pos) /*!< 0x00000020 */ -#define EXTI_PR_PIF5 EXTI_PR_PIF5_Msk /*!< Pending bit 5 */ -#define EXTI_PR_PIF6_Pos (6U) -#define EXTI_PR_PIF6_Msk (0x1UL << EXTI_PR_PIF6_Pos) /*!< 0x00000040 */ -#define EXTI_PR_PIF6 EXTI_PR_PIF6_Msk /*!< Pending bit 6 */ -#define EXTI_PR_PIF7_Pos (7U) -#define EXTI_PR_PIF7_Msk (0x1UL << EXTI_PR_PIF7_Pos) /*!< 0x00000080 */ -#define EXTI_PR_PIF7 EXTI_PR_PIF7_Msk /*!< Pending bit 7 */ -#define EXTI_PR_PIF8_Pos (8U) -#define EXTI_PR_PIF8_Msk (0x1UL << EXTI_PR_PIF8_Pos) /*!< 0x00000100 */ -#define EXTI_PR_PIF8 EXTI_PR_PIF8_Msk /*!< Pending bit 8 */ -#define EXTI_PR_PIF9_Pos (9U) -#define EXTI_PR_PIF9_Msk (0x1UL << EXTI_PR_PIF9_Pos) /*!< 0x00000200 */ -#define EXTI_PR_PIF9 EXTI_PR_PIF9_Msk /*!< Pending bit 9 */ -#define EXTI_PR_PIF10_Pos (10U) -#define EXTI_PR_PIF10_Msk (0x1UL << EXTI_PR_PIF10_Pos) /*!< 0x00000400 */ -#define EXTI_PR_PIF10 EXTI_PR_PIF10_Msk /*!< Pending bit 10 */ -#define EXTI_PR_PIF11_Pos (11U) -#define EXTI_PR_PIF11_Msk (0x1UL << EXTI_PR_PIF11_Pos) /*!< 0x00000800 */ -#define EXTI_PR_PIF11 EXTI_PR_PIF11_Msk /*!< Pending bit 11 */ -#define EXTI_PR_PIF12_Pos (12U) -#define EXTI_PR_PIF12_Msk (0x1UL << EXTI_PR_PIF12_Pos) /*!< 0x00001000 */ -#define EXTI_PR_PIF12 EXTI_PR_PIF12_Msk /*!< Pending bit 12 */ -#define EXTI_PR_PIF13_Pos (13U) -#define EXTI_PR_PIF13_Msk (0x1UL << EXTI_PR_PIF13_Pos) /*!< 0x00002000 */ -#define EXTI_PR_PIF13 EXTI_PR_PIF13_Msk /*!< Pending bit 13 */ -#define EXTI_PR_PIF14_Pos (14U) -#define EXTI_PR_PIF14_Msk (0x1UL << EXTI_PR_PIF14_Pos) /*!< 0x00004000 */ -#define EXTI_PR_PIF14 EXTI_PR_PIF14_Msk /*!< Pending bit 14 */ -#define EXTI_PR_PIF15_Pos (15U) -#define EXTI_PR_PIF15_Msk (0x1UL << EXTI_PR_PIF15_Pos) /*!< 0x00008000 */ -#define EXTI_PR_PIF15 EXTI_PR_PIF15_Msk /*!< Pending bit 15 */ -#define EXTI_PR_PIF16_Pos (16U) -#define EXTI_PR_PIF16_Msk (0x1UL << EXTI_PR_PIF16_Pos) /*!< 0x00010000 */ -#define EXTI_PR_PIF16 EXTI_PR_PIF16_Msk /*!< Pending bit 16 */ -#define EXTI_PR_PIF17_Pos (17U) -#define EXTI_PR_PIF17_Msk (0x1UL << EXTI_PR_PIF17_Pos) /*!< 0x00020000 */ -#define EXTI_PR_PIF17 EXTI_PR_PIF17_Msk /*!< Pending bit 17 */ -#define EXTI_PR_PIF19_Pos (19U) -#define EXTI_PR_PIF19_Msk (0x1UL << EXTI_PR_PIF19_Pos) /*!< 0x00080000 */ -#define EXTI_PR_PIF19 EXTI_PR_PIF19_Msk /*!< Pending bit 19 */ -#define EXTI_PR_PIF20_Pos (20U) -#define EXTI_PR_PIF20_Msk (0x1UL << EXTI_PR_PIF20_Pos) /*!< 0x00100000 */ -#define EXTI_PR_PIF20 EXTI_PR_PIF20_Msk /*!< Pending bit 20 */ -#define EXTI_PR_PIF21_Pos (21U) -#define EXTI_PR_PIF21_Msk (0x1UL << EXTI_PR_PIF21_Pos) /*!< 0x00200000 */ -#define EXTI_PR_PIF21 EXTI_PR_PIF21_Msk /*!< Pending bit 21 */ -#define EXTI_PR_PIF22_Pos (22U) -#define EXTI_PR_PIF22_Msk (0x1UL << EXTI_PR_PIF22_Pos) /*!< 0x00400000 */ -#define EXTI_PR_PIF22 EXTI_PR_PIF22_Msk /*!< Pending bit 22 */ - -/* Legacy defines */ -#define EXTI_PR_PR0 EXTI_PR_PIF0 -#define EXTI_PR_PR1 EXTI_PR_PIF1 -#define EXTI_PR_PR2 EXTI_PR_PIF2 -#define EXTI_PR_PR3 EXTI_PR_PIF3 -#define EXTI_PR_PR4 EXTI_PR_PIF4 -#define EXTI_PR_PR5 EXTI_PR_PIF5 -#define EXTI_PR_PR6 EXTI_PR_PIF6 -#define EXTI_PR_PR7 EXTI_PR_PIF7 -#define EXTI_PR_PR8 EXTI_PR_PIF8 -#define EXTI_PR_PR9 EXTI_PR_PIF9 -#define EXTI_PR_PR10 EXTI_PR_PIF10 -#define EXTI_PR_PR11 EXTI_PR_PIF11 -#define EXTI_PR_PR12 EXTI_PR_PIF12 -#define EXTI_PR_PR13 EXTI_PR_PIF13 -#define EXTI_PR_PR14 EXTI_PR_PIF14 -#define EXTI_PR_PR15 EXTI_PR_PIF15 -#define EXTI_PR_PR16 EXTI_PR_PIF16 -#define EXTI_PR_PR17 EXTI_PR_PIF17 -#define EXTI_PR_PR19 EXTI_PR_PIF19 -#define EXTI_PR_PR20 EXTI_PR_PIF20 -#define EXTI_PR_PR21 EXTI_PR_PIF21 -#define EXTI_PR_PR22 EXTI_PR_PIF22 - -/******************************************************************************/ -/* */ -/* FLASH and Option Bytes Registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for FLASH_ACR register ******************/ -#define FLASH_ACR_LATENCY_Pos (0U) -#define FLASH_ACR_LATENCY_Msk (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ -#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< LATENCY bit (Latency) */ -#define FLASH_ACR_PRFTEN_Pos (1U) -#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000002 */ -#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch Buffer Enable */ -#define FLASH_ACR_SLEEP_PD_Pos (3U) -#define FLASH_ACR_SLEEP_PD_Msk (0x1UL << FLASH_ACR_SLEEP_PD_Pos) /*!< 0x00000008 */ -#define FLASH_ACR_SLEEP_PD FLASH_ACR_SLEEP_PD_Msk /*!< Flash mode during sleep mode */ -#define FLASH_ACR_RUN_PD_Pos (4U) -#define FLASH_ACR_RUN_PD_Msk (0x1UL << FLASH_ACR_RUN_PD_Pos) /*!< 0x00000010 */ -#define FLASH_ACR_RUN_PD FLASH_ACR_RUN_PD_Msk /*!< Flash mode during RUN mode */ -#define FLASH_ACR_DISAB_BUF_Pos (5U) -#define FLASH_ACR_DISAB_BUF_Msk (0x1UL << FLASH_ACR_DISAB_BUF_Pos) /*!< 0x00000020 */ -#define FLASH_ACR_DISAB_BUF FLASH_ACR_DISAB_BUF_Msk /*!< Disable Buffer */ -#define FLASH_ACR_PRE_READ_Pos (6U) -#define FLASH_ACR_PRE_READ_Msk (0x1UL << FLASH_ACR_PRE_READ_Pos) /*!< 0x00000040 */ -#define FLASH_ACR_PRE_READ FLASH_ACR_PRE_READ_Msk /*!< Pre-read data address */ - -/******************* Bit definition for FLASH_PECR register ******************/ -#define FLASH_PECR_PELOCK_Pos (0U) -#define FLASH_PECR_PELOCK_Msk (0x1UL << FLASH_PECR_PELOCK_Pos) /*!< 0x00000001 */ -#define FLASH_PECR_PELOCK FLASH_PECR_PELOCK_Msk /*!< FLASH_PECR and Flash data Lock */ -#define FLASH_PECR_PRGLOCK_Pos (1U) -#define FLASH_PECR_PRGLOCK_Msk (0x1UL << FLASH_PECR_PRGLOCK_Pos) /*!< 0x00000002 */ -#define FLASH_PECR_PRGLOCK FLASH_PECR_PRGLOCK_Msk /*!< Program matrix Lock */ -#define FLASH_PECR_OPTLOCK_Pos (2U) -#define FLASH_PECR_OPTLOCK_Msk (0x1UL << FLASH_PECR_OPTLOCK_Pos) /*!< 0x00000004 */ -#define FLASH_PECR_OPTLOCK FLASH_PECR_OPTLOCK_Msk /*!< Option byte matrix Lock */ -#define FLASH_PECR_PROG_Pos (3U) -#define FLASH_PECR_PROG_Msk (0x1UL << FLASH_PECR_PROG_Pos) /*!< 0x00000008 */ -#define FLASH_PECR_PROG FLASH_PECR_PROG_Msk /*!< Program matrix selection */ -#define FLASH_PECR_DATA_Pos (4U) -#define FLASH_PECR_DATA_Msk (0x1UL << FLASH_PECR_DATA_Pos) /*!< 0x00000010 */ -#define FLASH_PECR_DATA FLASH_PECR_DATA_Msk /*!< Data matrix selection */ -#define FLASH_PECR_FIX_Pos (8U) -#define FLASH_PECR_FIX_Msk (0x1UL << FLASH_PECR_FIX_Pos) /*!< 0x00000100 */ -#define FLASH_PECR_FIX FLASH_PECR_FIX_Msk /*!< Fixed Time Data write for Word/Half Word/Byte programming */ -#define FLASH_PECR_ERASE_Pos (9U) -#define FLASH_PECR_ERASE_Msk (0x1UL << FLASH_PECR_ERASE_Pos) /*!< 0x00000200 */ -#define FLASH_PECR_ERASE FLASH_PECR_ERASE_Msk /*!< Page erasing mode */ -#define FLASH_PECR_FPRG_Pos (10U) -#define FLASH_PECR_FPRG_Msk (0x1UL << FLASH_PECR_FPRG_Pos) /*!< 0x00000400 */ -#define FLASH_PECR_FPRG FLASH_PECR_FPRG_Msk /*!< Fast Page/Half Page programming mode */ -#define FLASH_PECR_EOPIE_Pos (16U) -#define FLASH_PECR_EOPIE_Msk (0x1UL << FLASH_PECR_EOPIE_Pos) /*!< 0x00010000 */ -#define FLASH_PECR_EOPIE FLASH_PECR_EOPIE_Msk /*!< End of programming interrupt */ -#define FLASH_PECR_ERRIE_Pos (17U) -#define FLASH_PECR_ERRIE_Msk (0x1UL << FLASH_PECR_ERRIE_Pos) /*!< 0x00020000 */ -#define FLASH_PECR_ERRIE FLASH_PECR_ERRIE_Msk /*!< Error interrupt */ -#define FLASH_PECR_OBL_LAUNCH_Pos (18U) -#define FLASH_PECR_OBL_LAUNCH_Msk (0x1UL << FLASH_PECR_OBL_LAUNCH_Pos) /*!< 0x00040000 */ -#define FLASH_PECR_OBL_LAUNCH FLASH_PECR_OBL_LAUNCH_Msk /*!< Launch the option byte loading */ -#define FLASH_PECR_HALF_ARRAY_Pos (19U) -#define FLASH_PECR_HALF_ARRAY_Msk (0x1UL << FLASH_PECR_HALF_ARRAY_Pos) /*!< 0x00080000 */ -#define FLASH_PECR_HALF_ARRAY FLASH_PECR_HALF_ARRAY_Msk /*!< Half array mode */ - -/****************** Bit definition for FLASH_PDKEYR register ******************/ -#define FLASH_PDKEYR_PDKEYR_Pos (0U) -#define FLASH_PDKEYR_PDKEYR_Msk (0xFFFFFFFFUL << FLASH_PDKEYR_PDKEYR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_PDKEYR_PDKEYR FLASH_PDKEYR_PDKEYR_Msk /*!< FLASH_PEC and data matrix Key */ - -/****************** Bit definition for FLASH_PEKEYR register ******************/ -#define FLASH_PEKEYR_PEKEYR_Pos (0U) -#define FLASH_PEKEYR_PEKEYR_Msk (0xFFFFFFFFUL << FLASH_PEKEYR_PEKEYR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_PEKEYR_PEKEYR FLASH_PEKEYR_PEKEYR_Msk /*!< FLASH_PEC and data matrix Key */ - -/****************** Bit definition for FLASH_PRGKEYR register ******************/ -#define FLASH_PRGKEYR_PRGKEYR_Pos (0U) -#define FLASH_PRGKEYR_PRGKEYR_Msk (0xFFFFFFFFUL << FLASH_PRGKEYR_PRGKEYR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_PRGKEYR_PRGKEYR FLASH_PRGKEYR_PRGKEYR_Msk /*!< Program matrix Key */ - -/****************** Bit definition for FLASH_OPTKEYR register ******************/ -#define FLASH_OPTKEYR_OPTKEYR_Pos (0U) -#define FLASH_OPTKEYR_OPTKEYR_Msk (0xFFFFFFFFUL << FLASH_OPTKEYR_OPTKEYR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_OPTKEYR_OPTKEYR FLASH_OPTKEYR_OPTKEYR_Msk /*!< Option bytes matrix Key */ - -/****************** Bit definition for FLASH_SR register *******************/ -#define FLASH_SR_BSY_Pos (0U) -#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00000001 */ -#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Busy */ -#define FLASH_SR_EOP_Pos (1U) -#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000002 */ -#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End Of Programming*/ -#define FLASH_SR_HVOFF_Pos (2U) -#define FLASH_SR_HVOFF_Msk (0x1UL << FLASH_SR_HVOFF_Pos) /*!< 0x00000004 */ -#define FLASH_SR_HVOFF FLASH_SR_HVOFF_Msk /*!< End of high voltage */ -#define FLASH_SR_READY_Pos (3U) -#define FLASH_SR_READY_Msk (0x1UL << FLASH_SR_READY_Pos) /*!< 0x00000008 */ -#define FLASH_SR_READY FLASH_SR_READY_Msk /*!< Flash ready after low power mode */ - -#define FLASH_SR_WRPERR_Pos (8U) -#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000100 */ -#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ -#define FLASH_SR_PGAERR_Pos (9U) -#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000200 */ -#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming Alignment Error */ -#define FLASH_SR_SIZERR_Pos (10U) -#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000400 */ -#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ -#define FLASH_SR_OPTVERR_Pos (11U) -#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00000800 */ -#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option Valid error */ -#define FLASH_SR_RDERR_Pos (13U) -#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00002000 */ -#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< Read protected error */ -#define FLASH_SR_NOTZEROERR_Pos (16U) -#define FLASH_SR_NOTZEROERR_Msk (0x1UL << FLASH_SR_NOTZEROERR_Pos) /*!< 0x00010000 */ -#define FLASH_SR_NOTZEROERR FLASH_SR_NOTZEROERR_Msk /*!< Not Zero error */ -#define FLASH_SR_FWWERR_Pos (17U) -#define FLASH_SR_FWWERR_Msk (0x1UL << FLASH_SR_FWWERR_Pos) /*!< 0x00020000 */ -#define FLASH_SR_FWWERR FLASH_SR_FWWERR_Msk /*!< Write/Errase operation aborted */ - -/* Legacy defines */ -#define FLASH_SR_FWWER FLASH_SR_FWWERR -#define FLASH_SR_ENHV FLASH_SR_HVOFF -#define FLASH_SR_ENDHV FLASH_SR_HVOFF - -/****************** Bit definition for FLASH_OPTR register *******************/ -#define FLASH_OPTR_RDPROT_Pos (0U) -#define FLASH_OPTR_RDPROT_Msk (0xFFUL << FLASH_OPTR_RDPROT_Pos) /*!< 0x000000FF */ -#define FLASH_OPTR_RDPROT FLASH_OPTR_RDPROT_Msk /*!< Read Protection */ -#define FLASH_OPTR_WPRMOD_Pos (8U) -#define FLASH_OPTR_WPRMOD_Msk (0x1UL << FLASH_OPTR_WPRMOD_Pos) /*!< 0x00000100 */ -#define FLASH_OPTR_WPRMOD FLASH_OPTR_WPRMOD_Msk /*!< Selection of protection mode of WPR bits */ -#define FLASH_OPTR_BOR_LEV_Pos (16U) -#define FLASH_OPTR_BOR_LEV_Msk (0xFUL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x000F0000 */ -#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR_LEV[3:0] Brown Out Reset Threshold Level*/ -#define FLASH_OPTR_IWDG_SW_Pos (20U) -#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00100000 */ -#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< IWDG_SW */ -#define FLASH_OPTR_nRST_STOP_Pos (21U) -#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00200000 */ -#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< nRST_STOP */ -#define FLASH_OPTR_nRST_STDBY_Pos (22U) -#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00400000 */ -#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< nRST_STDBY */ -#define FLASH_OPTR_USER_Pos (20U) -#define FLASH_OPTR_USER_Msk (0x7UL << FLASH_OPTR_USER_Pos) /*!< 0x00700000 */ -#define FLASH_OPTR_USER FLASH_OPTR_USER_Msk /*!< User Option Bytes */ -#define FLASH_OPTR_BOOT1_Pos (31U) -#define FLASH_OPTR_BOOT1_Msk (0x1UL << FLASH_OPTR_BOOT1_Pos) /*!< 0x80000000 */ -#define FLASH_OPTR_BOOT1 FLASH_OPTR_BOOT1_Msk /*!< BOOT1 */ - -/****************** Bit definition for FLASH_WRPR register ******************/ -#define FLASH_WRPR_WRP_Pos (0U) -#define FLASH_WRPR_WRP_Msk (0xFFFFUL << FLASH_WRPR_WRP_Pos) /*!< 0x0000FFFF */ -#define FLASH_WRPR_WRP FLASH_WRPR_WRP_Msk /*!< Write Protection bits */ - -/******************************************************************************/ -/* */ -/* General Purpose IOs (GPIO) */ -/* */ -/******************************************************************************/ -/******************* Bit definition for GPIO_MODER register *****************/ -#define GPIO_MODER_MODE0_Pos (0U) -#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ -#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk -#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ -#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ -#define GPIO_MODER_MODE1_Pos (2U) -#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ -#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk -#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ -#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ -#define GPIO_MODER_MODE2_Pos (4U) -#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ -#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk -#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ -#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ -#define GPIO_MODER_MODE3_Pos (6U) -#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ -#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk -#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ -#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ -#define GPIO_MODER_MODE4_Pos (8U) -#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ -#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk -#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ -#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ -#define GPIO_MODER_MODE5_Pos (10U) -#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ -#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk -#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ -#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ -#define GPIO_MODER_MODE6_Pos (12U) -#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ -#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk -#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ -#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ -#define GPIO_MODER_MODE7_Pos (14U) -#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ -#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk -#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ -#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ -#define GPIO_MODER_MODE8_Pos (16U) -#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ -#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk -#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ -#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ -#define GPIO_MODER_MODE9_Pos (18U) -#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ -#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk -#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ -#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ -#define GPIO_MODER_MODE10_Pos (20U) -#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ -#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk -#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ -#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ -#define GPIO_MODER_MODE11_Pos (22U) -#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ -#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk -#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ -#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ -#define GPIO_MODER_MODE12_Pos (24U) -#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ -#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk -#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ -#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ -#define GPIO_MODER_MODE13_Pos (26U) -#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ -#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk -#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ -#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ -#define GPIO_MODER_MODE14_Pos (28U) -#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ -#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk -#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ -#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ -#define GPIO_MODER_MODE15_Pos (30U) -#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ -#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk -#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ -#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for GPIO_OTYPER register *****************/ -#define GPIO_OTYPER_OT_0 (0x00000001U) -#define GPIO_OTYPER_OT_1 (0x00000002U) -#define GPIO_OTYPER_OT_2 (0x00000004U) -#define GPIO_OTYPER_OT_3 (0x00000008U) -#define GPIO_OTYPER_OT_4 (0x00000010U) -#define GPIO_OTYPER_OT_5 (0x00000020U) -#define GPIO_OTYPER_OT_6 (0x00000040U) -#define GPIO_OTYPER_OT_7 (0x00000080U) -#define GPIO_OTYPER_OT_8 (0x00000100U) -#define GPIO_OTYPER_OT_9 (0x00000200U) -#define GPIO_OTYPER_OT_10 (0x00000400U) -#define GPIO_OTYPER_OT_11 (0x00000800U) -#define GPIO_OTYPER_OT_12 (0x00001000U) -#define GPIO_OTYPER_OT_13 (0x00002000U) -#define GPIO_OTYPER_OT_14 (0x00004000U) -#define GPIO_OTYPER_OT_15 (0x00008000U) - -/**************** Bit definition for GPIO_OSPEEDR register ******************/ -#define GPIO_OSPEEDER_OSPEED0_Pos (0U) -#define GPIO_OSPEEDER_OSPEED0_Msk (0x3UL << GPIO_OSPEEDER_OSPEED0_Pos) /*!< 0x00000003 */ -#define GPIO_OSPEEDER_OSPEED0 GPIO_OSPEEDER_OSPEED0_Msk -#define GPIO_OSPEEDER_OSPEED0_0 (0x1UL << GPIO_OSPEEDER_OSPEED0_Pos) /*!< 0x00000001 */ -#define GPIO_OSPEEDER_OSPEED0_1 (0x2UL << GPIO_OSPEEDER_OSPEED0_Pos) /*!< 0x00000002 */ -#define GPIO_OSPEEDER_OSPEED1_Pos (2U) -#define GPIO_OSPEEDER_OSPEED1_Msk (0x3UL << GPIO_OSPEEDER_OSPEED1_Pos) /*!< 0x0000000C */ -#define GPIO_OSPEEDER_OSPEED1 GPIO_OSPEEDER_OSPEED1_Msk -#define GPIO_OSPEEDER_OSPEED1_0 (0x1UL << GPIO_OSPEEDER_OSPEED1_Pos) /*!< 0x00000004 */ -#define GPIO_OSPEEDER_OSPEED1_1 (0x2UL << GPIO_OSPEEDER_OSPEED1_Pos) /*!< 0x00000008 */ -#define GPIO_OSPEEDER_OSPEED2_Pos (4U) -#define GPIO_OSPEEDER_OSPEED2_Msk (0x3UL << GPIO_OSPEEDER_OSPEED2_Pos) /*!< 0x00000030 */ -#define GPIO_OSPEEDER_OSPEED2 GPIO_OSPEEDER_OSPEED2_Msk -#define GPIO_OSPEEDER_OSPEED2_0 (0x1UL << GPIO_OSPEEDER_OSPEED2_Pos) /*!< 0x00000010 */ -#define GPIO_OSPEEDER_OSPEED2_1 (0x2UL << GPIO_OSPEEDER_OSPEED2_Pos) /*!< 0x00000020 */ -#define GPIO_OSPEEDER_OSPEED3_Pos (6U) -#define GPIO_OSPEEDER_OSPEED3_Msk (0x3UL << GPIO_OSPEEDER_OSPEED3_Pos) /*!< 0x000000C0 */ -#define GPIO_OSPEEDER_OSPEED3 GPIO_OSPEEDER_OSPEED3_Msk -#define GPIO_OSPEEDER_OSPEED3_0 (0x1UL << GPIO_OSPEEDER_OSPEED3_Pos) /*!< 0x00000040 */ -#define GPIO_OSPEEDER_OSPEED3_1 (0x2UL << GPIO_OSPEEDER_OSPEED3_Pos) /*!< 0x00000080 */ -#define GPIO_OSPEEDER_OSPEED4_Pos (8U) -#define GPIO_OSPEEDER_OSPEED4_Msk (0x3UL << GPIO_OSPEEDER_OSPEED4_Pos) /*!< 0x00000300 */ -#define GPIO_OSPEEDER_OSPEED4 GPIO_OSPEEDER_OSPEED4_Msk -#define GPIO_OSPEEDER_OSPEED4_0 (0x1UL << GPIO_OSPEEDER_OSPEED4_Pos) /*!< 0x00000100 */ -#define GPIO_OSPEEDER_OSPEED4_1 (0x2UL << GPIO_OSPEEDER_OSPEED4_Pos) /*!< 0x00000200 */ -#define GPIO_OSPEEDER_OSPEED5_Pos (10U) -#define GPIO_OSPEEDER_OSPEED5_Msk (0x3UL << GPIO_OSPEEDER_OSPEED5_Pos) /*!< 0x00000C00 */ -#define GPIO_OSPEEDER_OSPEED5 GPIO_OSPEEDER_OSPEED5_Msk -#define GPIO_OSPEEDER_OSPEED5_0 (0x1UL << GPIO_OSPEEDER_OSPEED5_Pos) /*!< 0x00000400 */ -#define GPIO_OSPEEDER_OSPEED5_1 (0x2UL << GPIO_OSPEEDER_OSPEED5_Pos) /*!< 0x00000800 */ -#define GPIO_OSPEEDER_OSPEED6_Pos (12U) -#define GPIO_OSPEEDER_OSPEED6_Msk (0x3UL << GPIO_OSPEEDER_OSPEED6_Pos) /*!< 0x00003000 */ -#define GPIO_OSPEEDER_OSPEED6 GPIO_OSPEEDER_OSPEED6_Msk -#define GPIO_OSPEEDER_OSPEED6_0 (0x1UL << GPIO_OSPEEDER_OSPEED6_Pos) /*!< 0x00001000 */ -#define GPIO_OSPEEDER_OSPEED6_1 (0x2UL << GPIO_OSPEEDER_OSPEED6_Pos) /*!< 0x00002000 */ -#define GPIO_OSPEEDER_OSPEED7_Pos (14U) -#define GPIO_OSPEEDER_OSPEED7_Msk (0x3UL << GPIO_OSPEEDER_OSPEED7_Pos) /*!< 0x0000C000 */ -#define GPIO_OSPEEDER_OSPEED7 GPIO_OSPEEDER_OSPEED7_Msk -#define GPIO_OSPEEDER_OSPEED7_0 (0x1UL << GPIO_OSPEEDER_OSPEED7_Pos) /*!< 0x00004000 */ -#define GPIO_OSPEEDER_OSPEED7_1 (0x2UL << GPIO_OSPEEDER_OSPEED7_Pos) /*!< 0x00008000 */ -#define GPIO_OSPEEDER_OSPEED8_Pos (16U) -#define GPIO_OSPEEDER_OSPEED8_Msk (0x3UL << GPIO_OSPEEDER_OSPEED8_Pos) /*!< 0x00030000 */ -#define GPIO_OSPEEDER_OSPEED8 GPIO_OSPEEDER_OSPEED8_Msk -#define GPIO_OSPEEDER_OSPEED8_0 (0x1UL << GPIO_OSPEEDER_OSPEED8_Pos) /*!< 0x00010000 */ -#define GPIO_OSPEEDER_OSPEED8_1 (0x2UL << GPIO_OSPEEDER_OSPEED8_Pos) /*!< 0x00020000 */ -#define GPIO_OSPEEDER_OSPEED9_Pos (18U) -#define GPIO_OSPEEDER_OSPEED9_Msk (0x3UL << GPIO_OSPEEDER_OSPEED9_Pos) /*!< 0x000C0000 */ -#define GPIO_OSPEEDER_OSPEED9 GPIO_OSPEEDER_OSPEED9_Msk -#define GPIO_OSPEEDER_OSPEED9_0 (0x1UL << GPIO_OSPEEDER_OSPEED9_Pos) /*!< 0x00040000 */ -#define GPIO_OSPEEDER_OSPEED9_1 (0x2UL << GPIO_OSPEEDER_OSPEED9_Pos) /*!< 0x00080000 */ -#define GPIO_OSPEEDER_OSPEED10_Pos (20U) -#define GPIO_OSPEEDER_OSPEED10_Msk (0x3UL << GPIO_OSPEEDER_OSPEED10_Pos) /*!< 0x00300000 */ -#define GPIO_OSPEEDER_OSPEED10 GPIO_OSPEEDER_OSPEED10_Msk -#define GPIO_OSPEEDER_OSPEED10_0 (0x1UL << GPIO_OSPEEDER_OSPEED10_Pos) /*!< 0x00100000 */ -#define GPIO_OSPEEDER_OSPEED10_1 (0x2UL << GPIO_OSPEEDER_OSPEED10_Pos) /*!< 0x00200000 */ -#define GPIO_OSPEEDER_OSPEED11_Pos (22U) -#define GPIO_OSPEEDER_OSPEED11_Msk (0x3UL << GPIO_OSPEEDER_OSPEED11_Pos) /*!< 0x00C00000 */ -#define GPIO_OSPEEDER_OSPEED11 GPIO_OSPEEDER_OSPEED11_Msk -#define GPIO_OSPEEDER_OSPEED11_0 (0x1UL << GPIO_OSPEEDER_OSPEED11_Pos) /*!< 0x00400000 */ -#define GPIO_OSPEEDER_OSPEED11_1 (0x2UL << GPIO_OSPEEDER_OSPEED11_Pos) /*!< 0x00800000 */ -#define GPIO_OSPEEDER_OSPEED12_Pos (24U) -#define GPIO_OSPEEDER_OSPEED12_Msk (0x3UL << GPIO_OSPEEDER_OSPEED12_Pos) /*!< 0x03000000 */ -#define GPIO_OSPEEDER_OSPEED12 GPIO_OSPEEDER_OSPEED12_Msk -#define GPIO_OSPEEDER_OSPEED12_0 (0x1UL << GPIO_OSPEEDER_OSPEED12_Pos) /*!< 0x01000000 */ -#define GPIO_OSPEEDER_OSPEED12_1 (0x2UL << GPIO_OSPEEDER_OSPEED12_Pos) /*!< 0x02000000 */ -#define GPIO_OSPEEDER_OSPEED13_Pos (26U) -#define GPIO_OSPEEDER_OSPEED13_Msk (0x3UL << GPIO_OSPEEDER_OSPEED13_Pos) /*!< 0x0C000000 */ -#define GPIO_OSPEEDER_OSPEED13 GPIO_OSPEEDER_OSPEED13_Msk -#define GPIO_OSPEEDER_OSPEED13_0 (0x1UL << GPIO_OSPEEDER_OSPEED13_Pos) /*!< 0x04000000 */ -#define GPIO_OSPEEDER_OSPEED13_1 (0x2UL << GPIO_OSPEEDER_OSPEED13_Pos) /*!< 0x08000000 */ -#define GPIO_OSPEEDER_OSPEED14_Pos (28U) -#define GPIO_OSPEEDER_OSPEED14_Msk (0x3UL << GPIO_OSPEEDER_OSPEED14_Pos) /*!< 0x30000000 */ -#define GPIO_OSPEEDER_OSPEED14 GPIO_OSPEEDER_OSPEED14_Msk -#define GPIO_OSPEEDER_OSPEED14_0 (0x1UL << GPIO_OSPEEDER_OSPEED14_Pos) /*!< 0x10000000 */ -#define GPIO_OSPEEDER_OSPEED14_1 (0x2UL << GPIO_OSPEEDER_OSPEED14_Pos) /*!< 0x20000000 */ -#define GPIO_OSPEEDER_OSPEED15_Pos (30U) -#define GPIO_OSPEEDER_OSPEED15_Msk (0x3UL << GPIO_OSPEEDER_OSPEED15_Pos) /*!< 0xC0000000 */ -#define GPIO_OSPEEDER_OSPEED15 GPIO_OSPEEDER_OSPEED15_Msk -#define GPIO_OSPEEDER_OSPEED15_0 (0x1UL << GPIO_OSPEEDER_OSPEED15_Pos) /*!< 0x40000000 */ -#define GPIO_OSPEEDER_OSPEED15_1 (0x2UL << GPIO_OSPEEDER_OSPEED15_Pos) /*!< 0x80000000 */ - -/******************* Bit definition for GPIO_PUPDR register ******************/ -#define GPIO_PUPDR_PUPD0_Pos (0U) -#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ -#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk -#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ -#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ -#define GPIO_PUPDR_PUPD1_Pos (2U) -#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ -#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk -#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ -#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ -#define GPIO_PUPDR_PUPD2_Pos (4U) -#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ -#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk -#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ -#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ -#define GPIO_PUPDR_PUPD3_Pos (6U) -#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ -#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk -#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ -#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ -#define GPIO_PUPDR_PUPD4_Pos (8U) -#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ -#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk -#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ -#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ -#define GPIO_PUPDR_PUPD5_Pos (10U) -#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ -#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk -#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ -#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ -#define GPIO_PUPDR_PUPD6_Pos (12U) -#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ -#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk -#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ -#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ -#define GPIO_PUPDR_PUPD7_Pos (14U) -#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ -#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk -#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ -#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ -#define GPIO_PUPDR_PUPD8_Pos (16U) -#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ -#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk -#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ -#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ -#define GPIO_PUPDR_PUPD9_Pos (18U) -#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ -#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk -#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ -#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ -#define GPIO_PUPDR_PUPD10_Pos (20U) -#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ -#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk -#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ -#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ -#define GPIO_PUPDR_PUPD11_Pos (22U) -#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ -#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk -#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ -#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ -#define GPIO_PUPDR_PUPD12_Pos (24U) -#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ -#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk -#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ -#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ -#define GPIO_PUPDR_PUPD13_Pos (26U) -#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ -#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk -#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ -#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ -#define GPIO_PUPDR_PUPD14_Pos (28U) -#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ -#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk -#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ -#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ -#define GPIO_PUPDR_PUPD15_Pos (30U) -#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ -#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk -#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ -#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ - -/******************* Bit definition for GPIO_IDR register *******************/ -#define GPIO_IDR_ID0_Pos (0U) -#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ -#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk -#define GPIO_IDR_ID1_Pos (1U) -#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ -#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk -#define GPIO_IDR_ID2_Pos (2U) -#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ -#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk -#define GPIO_IDR_ID3_Pos (3U) -#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ -#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk -#define GPIO_IDR_ID4_Pos (4U) -#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ -#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk -#define GPIO_IDR_ID5_Pos (5U) -#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ -#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk -#define GPIO_IDR_ID6_Pos (6U) -#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ -#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk -#define GPIO_IDR_ID7_Pos (7U) -#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ -#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk -#define GPIO_IDR_ID8_Pos (8U) -#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ -#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk -#define GPIO_IDR_ID9_Pos (9U) -#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ -#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk -#define GPIO_IDR_ID10_Pos (10U) -#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ -#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk -#define GPIO_IDR_ID11_Pos (11U) -#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ -#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk -#define GPIO_IDR_ID12_Pos (12U) -#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ -#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk -#define GPIO_IDR_ID13_Pos (13U) -#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ -#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk -#define GPIO_IDR_ID14_Pos (14U) -#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ -#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk -#define GPIO_IDR_ID15_Pos (15U) -#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ -#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk - -/****************** Bit definition for GPIO_ODR register ********************/ -#define GPIO_ODR_OD0_Pos (0U) -#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ -#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk -#define GPIO_ODR_OD1_Pos (1U) -#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ -#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk -#define GPIO_ODR_OD2_Pos (2U) -#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ -#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk -#define GPIO_ODR_OD3_Pos (3U) -#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ -#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk -#define GPIO_ODR_OD4_Pos (4U) -#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ -#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk -#define GPIO_ODR_OD5_Pos (5U) -#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ -#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk -#define GPIO_ODR_OD6_Pos (6U) -#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ -#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk -#define GPIO_ODR_OD7_Pos (7U) -#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ -#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk -#define GPIO_ODR_OD8_Pos (8U) -#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ -#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk -#define GPIO_ODR_OD9_Pos (9U) -#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ -#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk -#define GPIO_ODR_OD10_Pos (10U) -#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ -#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk -#define GPIO_ODR_OD11_Pos (11U) -#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ -#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk -#define GPIO_ODR_OD12_Pos (12U) -#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ -#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk -#define GPIO_ODR_OD13_Pos (13U) -#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ -#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk -#define GPIO_ODR_OD14_Pos (14U) -#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ -#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk -#define GPIO_ODR_OD15_Pos (15U) -#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ -#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk - -/****************** Bit definition for GPIO_BSRR register ********************/ -#define GPIO_BSRR_BS_0 (0x00000001U) -#define GPIO_BSRR_BS_1 (0x00000002U) -#define GPIO_BSRR_BS_2 (0x00000004U) -#define GPIO_BSRR_BS_3 (0x00000008U) -#define GPIO_BSRR_BS_4 (0x00000010U) -#define GPIO_BSRR_BS_5 (0x00000020U) -#define GPIO_BSRR_BS_6 (0x00000040U) -#define GPIO_BSRR_BS_7 (0x00000080U) -#define GPIO_BSRR_BS_8 (0x00000100U) -#define GPIO_BSRR_BS_9 (0x00000200U) -#define GPIO_BSRR_BS_10 (0x00000400U) -#define GPIO_BSRR_BS_11 (0x00000800U) -#define GPIO_BSRR_BS_12 (0x00001000U) -#define GPIO_BSRR_BS_13 (0x00002000U) -#define GPIO_BSRR_BS_14 (0x00004000U) -#define GPIO_BSRR_BS_15 (0x00008000U) -#define GPIO_BSRR_BR_0 (0x00010000U) -#define GPIO_BSRR_BR_1 (0x00020000U) -#define GPIO_BSRR_BR_2 (0x00040000U) -#define GPIO_BSRR_BR_3 (0x00080000U) -#define GPIO_BSRR_BR_4 (0x00100000U) -#define GPIO_BSRR_BR_5 (0x00200000U) -#define GPIO_BSRR_BR_6 (0x00400000U) -#define GPIO_BSRR_BR_7 (0x00800000U) -#define GPIO_BSRR_BR_8 (0x01000000U) -#define GPIO_BSRR_BR_9 (0x02000000U) -#define GPIO_BSRR_BR_10 (0x04000000U) -#define GPIO_BSRR_BR_11 (0x08000000U) -#define GPIO_BSRR_BR_12 (0x10000000U) -#define GPIO_BSRR_BR_13 (0x20000000U) -#define GPIO_BSRR_BR_14 (0x40000000U) -#define GPIO_BSRR_BR_15 (0x80000000U) - -/****************** Bit definition for GPIO_LCKR register ********************/ -#define GPIO_LCKR_LCK0_Pos (0U) -#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ -#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk -#define GPIO_LCKR_LCK1_Pos (1U) -#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ -#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk -#define GPIO_LCKR_LCK2_Pos (2U) -#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ -#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk -#define GPIO_LCKR_LCK3_Pos (3U) -#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ -#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk -#define GPIO_LCKR_LCK4_Pos (4U) -#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ -#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk -#define GPIO_LCKR_LCK5_Pos (5U) -#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ -#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk -#define GPIO_LCKR_LCK6_Pos (6U) -#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ -#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk -#define GPIO_LCKR_LCK7_Pos (7U) -#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ -#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk -#define GPIO_LCKR_LCK8_Pos (8U) -#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ -#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk -#define GPIO_LCKR_LCK9_Pos (9U) -#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ -#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk -#define GPIO_LCKR_LCK10_Pos (10U) -#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ -#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk -#define GPIO_LCKR_LCK11_Pos (11U) -#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ -#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk -#define GPIO_LCKR_LCK12_Pos (12U) -#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ -#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk -#define GPIO_LCKR_LCK13_Pos (13U) -#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ -#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk -#define GPIO_LCKR_LCK14_Pos (14U) -#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ -#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk -#define GPIO_LCKR_LCK15_Pos (15U) -#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ -#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk -#define GPIO_LCKR_LCKK_Pos (16U) -#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ -#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk - -/****************** Bit definition for GPIO_AFRL register ********************/ -#define GPIO_AFRL_AFSEL0_Pos (0U) -#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ -#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk -#define GPIO_AFRL_AFSEL1_Pos (4U) -#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ -#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk -#define GPIO_AFRL_AFSEL2_Pos (8U) -#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ -#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk -#define GPIO_AFRL_AFSEL3_Pos (12U) -#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ -#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk -#define GPIO_AFRL_AFSEL4_Pos (16U) -#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ -#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk -#define GPIO_AFRL_AFSEL5_Pos (20U) -#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ -#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk -#define GPIO_AFRL_AFSEL6_Pos (24U) -#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ -#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk -#define GPIO_AFRL_AFSEL7_Pos (28U) -#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ -#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk - -/****************** Bit definition for GPIO_AFRH register ********************/ -#define GPIO_AFRH_AFSEL8_Pos (0U) -#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ -#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk -#define GPIO_AFRH_AFSEL9_Pos (4U) -#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ -#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk -#define GPIO_AFRH_AFSEL10_Pos (8U) -#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ -#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk -#define GPIO_AFRH_AFSEL11_Pos (12U) -#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ -#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk -#define GPIO_AFRH_AFSEL12_Pos (16U) -#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ -#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk -#define GPIO_AFRH_AFSEL13_Pos (20U) -#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ -#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk -#define GPIO_AFRH_AFSEL14_Pos (24U) -#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ -#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk -#define GPIO_AFRH_AFSEL15_Pos (28U) -#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ -#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk - -/****************** Bit definition for GPIO_BRR register *********************/ -#define GPIO_BRR_BR_0 (0x00000001U) -#define GPIO_BRR_BR_1 (0x00000002U) -#define GPIO_BRR_BR_2 (0x00000004U) -#define GPIO_BRR_BR_3 (0x00000008U) -#define GPIO_BRR_BR_4 (0x00000010U) -#define GPIO_BRR_BR_5 (0x00000020U) -#define GPIO_BRR_BR_6 (0x00000040U) -#define GPIO_BRR_BR_7 (0x00000080U) -#define GPIO_BRR_BR_8 (0x00000100U) -#define GPIO_BRR_BR_9 (0x00000200U) -#define GPIO_BRR_BR_10 (0x00000400U) -#define GPIO_BRR_BR_11 (0x00000800U) -#define GPIO_BRR_BR_12 (0x00001000U) -#define GPIO_BRR_BR_13 (0x00002000U) -#define GPIO_BRR_BR_14 (0x00004000U) -#define GPIO_BRR_BR_15 (0x00008000U) - -/******************************************************************************/ -/* */ -/* Inter-integrated Circuit Interface (I2C) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for I2C_CR1 register *******************/ -#define I2C_CR1_PE_Pos (0U) -#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ -#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ -#define I2C_CR1_TXIE_Pos (1U) -#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ -#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ -#define I2C_CR1_RXIE_Pos (2U) -#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ -#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ -#define I2C_CR1_ADDRIE_Pos (3U) -#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ -#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ -#define I2C_CR1_NACKIE_Pos (4U) -#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ -#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ -#define I2C_CR1_STOPIE_Pos (5U) -#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ -#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ -#define I2C_CR1_TCIE_Pos (6U) -#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ -#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ -#define I2C_CR1_ERRIE_Pos (7U) -#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ -#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ -#define I2C_CR1_DNF_Pos (8U) -#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ -#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ -#define I2C_CR1_ANFOFF_Pos (12U) -#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ -#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ -#define I2C_CR1_TXDMAEN_Pos (14U) -#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ -#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ -#define I2C_CR1_RXDMAEN_Pos (15U) -#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ -#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ -#define I2C_CR1_SBC_Pos (16U) -#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ -#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ -#define I2C_CR1_NOSTRETCH_Pos (17U) -#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ -#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ -#define I2C_CR1_WUPEN_Pos (18U) -#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ -#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ -#define I2C_CR1_GCEN_Pos (19U) -#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ -#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ -#define I2C_CR1_SMBHEN_Pos (20U) -#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ -#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ -#define I2C_CR1_SMBDEN_Pos (21U) -#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ -#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ -#define I2C_CR1_ALERTEN_Pos (22U) -#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ -#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ -#define I2C_CR1_PECEN_Pos (23U) -#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ -#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ - -/****************** Bit definition for I2C_CR2 register ********************/ -#define I2C_CR2_SADD_Pos (0U) -#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ -#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ -#define I2C_CR2_RD_WRN_Pos (10U) -#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ -#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ -#define I2C_CR2_ADD10_Pos (11U) -#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ -#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ -#define I2C_CR2_HEAD10R_Pos (12U) -#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ -#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ -#define I2C_CR2_START_Pos (13U) -#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ -#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ -#define I2C_CR2_STOP_Pos (14U) -#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ -#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ -#define I2C_CR2_NACK_Pos (15U) -#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ -#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ -#define I2C_CR2_NBYTES_Pos (16U) -#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ -#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ -#define I2C_CR2_RELOAD_Pos (24U) -#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ -#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ -#define I2C_CR2_AUTOEND_Pos (25U) -#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ -#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ -#define I2C_CR2_PECBYTE_Pos (26U) -#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ -#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ - -/******************* Bit definition for I2C_OAR1 register ******************/ -#define I2C_OAR1_OA1_Pos (0U) -#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ -#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ -#define I2C_OAR1_OA1MODE_Pos (10U) -#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ -#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ -#define I2C_OAR1_OA1EN_Pos (15U) -#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ -#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ - -/******************* Bit definition for I2C_OAR2 register ******************/ -#define I2C_OAR2_OA2_Pos (1U) -#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ -#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ -#define I2C_OAR2_OA2MSK_Pos (8U) -#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ -#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ -#define I2C_OAR2_OA2NOMASK (0x00000000U) /*!< No mask */ -#define I2C_OAR2_OA2MASK01_Pos (8U) -#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ -#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ -#define I2C_OAR2_OA2MASK02_Pos (9U) -#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ -#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ -#define I2C_OAR2_OA2MASK03_Pos (8U) -#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ -#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ -#define I2C_OAR2_OA2MASK04_Pos (10U) -#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ -#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ -#define I2C_OAR2_OA2MASK05_Pos (8U) -#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ -#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ -#define I2C_OAR2_OA2MASK06_Pos (9U) -#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ -#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ -#define I2C_OAR2_OA2MASK07_Pos (8U) -#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ -#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ -#define I2C_OAR2_OA2EN_Pos (15U) -#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ -#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ - -/******************* Bit definition for I2C_TIMINGR register *******************/ -#define I2C_TIMINGR_SCLL_Pos (0U) -#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ -#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ -#define I2C_TIMINGR_SCLH_Pos (8U) -#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ -#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ -#define I2C_TIMINGR_SDADEL_Pos (16U) -#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ -#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ -#define I2C_TIMINGR_SCLDEL_Pos (20U) -#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ -#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ -#define I2C_TIMINGR_PRESC_Pos (28U) -#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ -#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ - -/******************* Bit definition for I2C_TIMEOUTR register *******************/ -#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) -#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ -#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ -#define I2C_TIMEOUTR_TIDLE_Pos (12U) -#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ -#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ -#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) -#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ -#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ -#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) -#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ -#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ -#define I2C_TIMEOUTR_TEXTEN_Pos (31U) -#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ -#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ - -/****************** Bit definition for I2C_ISR register *********************/ -#define I2C_ISR_TXE_Pos (0U) -#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ -#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ -#define I2C_ISR_TXIS_Pos (1U) -#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ -#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ -#define I2C_ISR_RXNE_Pos (2U) -#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ -#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ -#define I2C_ISR_ADDR_Pos (3U) -#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ -#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ -#define I2C_ISR_NACKF_Pos (4U) -#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ -#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ -#define I2C_ISR_STOPF_Pos (5U) -#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ -#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ -#define I2C_ISR_TC_Pos (6U) -#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ -#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ -#define I2C_ISR_TCR_Pos (7U) -#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ -#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ -#define I2C_ISR_BERR_Pos (8U) -#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ -#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ -#define I2C_ISR_ARLO_Pos (9U) -#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ -#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ -#define I2C_ISR_OVR_Pos (10U) -#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ -#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ -#define I2C_ISR_PECERR_Pos (11U) -#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ -#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ -#define I2C_ISR_TIMEOUT_Pos (12U) -#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ -#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ -#define I2C_ISR_ALERT_Pos (13U) -#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ -#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ -#define I2C_ISR_BUSY_Pos (15U) -#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ -#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ -#define I2C_ISR_DIR_Pos (16U) -#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ -#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ -#define I2C_ISR_ADDCODE_Pos (17U) -#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ -#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ - -/****************** Bit definition for I2C_ICR register *********************/ -#define I2C_ICR_ADDRCF_Pos (3U) -#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ -#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ -#define I2C_ICR_NACKCF_Pos (4U) -#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ -#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ -#define I2C_ICR_STOPCF_Pos (5U) -#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ -#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ -#define I2C_ICR_BERRCF_Pos (8U) -#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ -#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ -#define I2C_ICR_ARLOCF_Pos (9U) -#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ -#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ -#define I2C_ICR_OVRCF_Pos (10U) -#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ -#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ -#define I2C_ICR_PECCF_Pos (11U) -#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ -#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ -#define I2C_ICR_TIMOUTCF_Pos (12U) -#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ -#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ -#define I2C_ICR_ALERTCF_Pos (13U) -#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ -#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ - -/****************** Bit definition for I2C_PECR register *********************/ -#define I2C_PECR_PEC_Pos (0U) -#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ -#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ - -/****************** Bit definition for I2C_RXDR register *********************/ -#define I2C_RXDR_RXDATA_Pos (0U) -#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ -#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ - -/****************** Bit definition for I2C_TXDR register *********************/ -#define I2C_TXDR_TXDATA_Pos (0U) -#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ -#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ - -/******************************************************************************/ -/* */ -/* Independent WATCHDOG (IWDG) */ -/* */ -/******************************************************************************/ -/******************* Bit definition for IWDG_KR register ********************/ -#define IWDG_KR_KEY_Pos (0U) -#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ -#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*!< Key value (write only, read 0000h) */ - -/******************* Bit definition for IWDG_PR register ********************/ -#define IWDG_PR_PR_Pos (0U) -#define IWDG_PR_PR_Msk (0x7UL << IWDG_PR_PR_Pos) /*!< 0x00000007 */ -#define IWDG_PR_PR IWDG_PR_PR_Msk /*!< PR[2:0] (Prescaler divider) */ -#define IWDG_PR_PR_0 (0x1UL << IWDG_PR_PR_Pos) /*!< 0x00000001 */ -#define IWDG_PR_PR_1 (0x2UL << IWDG_PR_PR_Pos) /*!< 0x00000002 */ -#define IWDG_PR_PR_2 (0x4UL << IWDG_PR_PR_Pos) /*!< 0x00000004 */ - -/******************* Bit definition for IWDG_RLR register *******************/ -#define IWDG_RLR_RL_Pos (0U) -#define IWDG_RLR_RL_Msk (0xFFFUL << IWDG_RLR_RL_Pos) /*!< 0x00000FFF */ -#define IWDG_RLR_RL IWDG_RLR_RL_Msk /*!< Watchdog counter reload value */ - -/******************* Bit definition for IWDG_SR register ********************/ -#define IWDG_SR_PVU_Pos (0U) -#define IWDG_SR_PVU_Msk (0x1UL << IWDG_SR_PVU_Pos) /*!< 0x00000001 */ -#define IWDG_SR_PVU IWDG_SR_PVU_Msk /*!< Watchdog prescaler value update */ -#define IWDG_SR_RVU_Pos (1U) -#define IWDG_SR_RVU_Msk (0x1UL << IWDG_SR_RVU_Pos) /*!< 0x00000002 */ -#define IWDG_SR_RVU IWDG_SR_RVU_Msk /*!< Watchdog counter reload value update */ -#define IWDG_SR_WVU_Pos (2U) -#define IWDG_SR_WVU_Msk (0x1UL << IWDG_SR_WVU_Pos) /*!< 0x00000004 */ -#define IWDG_SR_WVU IWDG_SR_WVU_Msk /*!< Watchdog counter window value update */ - -/******************* Bit definition for IWDG_KR register ********************/ -#define IWDG_WINR_WIN_Pos (0U) -#define IWDG_WINR_WIN_Msk (0xFFFUL << IWDG_WINR_WIN_Pos) /*!< 0x00000FFF */ -#define IWDG_WINR_WIN IWDG_WINR_WIN_Msk /*!< Watchdog counter window value */ - -/******************************************************************************/ -/* */ -/* Low Power Timer (LPTTIM) */ -/* */ -/******************************************************************************/ -/****************** Bit definition for LPTIM_ISR register *******************/ -#define LPTIM_ISR_CMPM_Pos (0U) -#define LPTIM_ISR_CMPM_Msk (0x1UL << LPTIM_ISR_CMPM_Pos) /*!< 0x00000001 */ -#define LPTIM_ISR_CMPM LPTIM_ISR_CMPM_Msk /*!< Compare match */ -#define LPTIM_ISR_ARRM_Pos (1U) -#define LPTIM_ISR_ARRM_Msk (0x1UL << LPTIM_ISR_ARRM_Pos) /*!< 0x00000002 */ -#define LPTIM_ISR_ARRM LPTIM_ISR_ARRM_Msk /*!< Autoreload match */ -#define LPTIM_ISR_EXTTRIG_Pos (2U) -#define LPTIM_ISR_EXTTRIG_Msk (0x1UL << LPTIM_ISR_EXTTRIG_Pos) /*!< 0x00000004 */ -#define LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG_Msk /*!< External trigger edge event */ -#define LPTIM_ISR_CMPOK_Pos (3U) -#define LPTIM_ISR_CMPOK_Msk (0x1UL << LPTIM_ISR_CMPOK_Pos) /*!< 0x00000008 */ -#define LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK_Msk /*!< Compare register update OK */ -#define LPTIM_ISR_ARROK_Pos (4U) -#define LPTIM_ISR_ARROK_Msk (0x1UL << LPTIM_ISR_ARROK_Pos) /*!< 0x00000010 */ -#define LPTIM_ISR_ARROK LPTIM_ISR_ARROK_Msk /*!< Autoreload register update OK */ -#define LPTIM_ISR_UP_Pos (5U) -#define LPTIM_ISR_UP_Msk (0x1UL << LPTIM_ISR_UP_Pos) /*!< 0x00000020 */ -#define LPTIM_ISR_UP LPTIM_ISR_UP_Msk /*!< Counter direction change down to up */ -#define LPTIM_ISR_DOWN_Pos (6U) -#define LPTIM_ISR_DOWN_Msk (0x1UL << LPTIM_ISR_DOWN_Pos) /*!< 0x00000040 */ -#define LPTIM_ISR_DOWN LPTIM_ISR_DOWN_Msk /*!< Counter direction change up to down */ - -/****************** Bit definition for LPTIM_ICR register *******************/ -#define LPTIM_ICR_CMPMCF_Pos (0U) -#define LPTIM_ICR_CMPMCF_Msk (0x1UL << LPTIM_ICR_CMPMCF_Pos) /*!< 0x00000001 */ -#define LPTIM_ICR_CMPMCF LPTIM_ICR_CMPMCF_Msk /*!< Compare match Clear Flag */ -#define LPTIM_ICR_ARRMCF_Pos (1U) -#define LPTIM_ICR_ARRMCF_Msk (0x1UL << LPTIM_ICR_ARRMCF_Pos) /*!< 0x00000002 */ -#define LPTIM_ICR_ARRMCF LPTIM_ICR_ARRMCF_Msk /*!< Autoreload match Clear Flag */ -#define LPTIM_ICR_EXTTRIGCF_Pos (2U) -#define LPTIM_ICR_EXTTRIGCF_Msk (0x1UL << LPTIM_ICR_EXTTRIGCF_Pos) /*!< 0x00000004 */ -#define LPTIM_ICR_EXTTRIGCF LPTIM_ICR_EXTTRIGCF_Msk /*!< External trigger edge event Clear Flag */ -#define LPTIM_ICR_CMPOKCF_Pos (3U) -#define LPTIM_ICR_CMPOKCF_Msk (0x1UL << LPTIM_ICR_CMPOKCF_Pos) /*!< 0x00000008 */ -#define LPTIM_ICR_CMPOKCF LPTIM_ICR_CMPOKCF_Msk /*!< Compare register update OK Clear Flag */ -#define LPTIM_ICR_ARROKCF_Pos (4U) -#define LPTIM_ICR_ARROKCF_Msk (0x1UL << LPTIM_ICR_ARROKCF_Pos) /*!< 0x00000010 */ -#define LPTIM_ICR_ARROKCF LPTIM_ICR_ARROKCF_Msk /*!< Autoreload register update OK Clear Flag */ -#define LPTIM_ICR_UPCF_Pos (5U) -#define LPTIM_ICR_UPCF_Msk (0x1UL << LPTIM_ICR_UPCF_Pos) /*!< 0x00000020 */ -#define LPTIM_ICR_UPCF LPTIM_ICR_UPCF_Msk /*!< Counter direction change down to up Clear Flag */ -#define LPTIM_ICR_DOWNCF_Pos (6U) -#define LPTIM_ICR_DOWNCF_Msk (0x1UL << LPTIM_ICR_DOWNCF_Pos) /*!< 0x00000040 */ -#define LPTIM_ICR_DOWNCF LPTIM_ICR_DOWNCF_Msk /*!< Counter direction change up to down Clear Flag */ - -/****************** Bit definition for LPTIM_IER register ********************/ -#define LPTIM_IER_CMPMIE_Pos (0U) -#define LPTIM_IER_CMPMIE_Msk (0x1UL << LPTIM_IER_CMPMIE_Pos) /*!< 0x00000001 */ -#define LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE_Msk /*!< Compare match Interrupt Enable */ -#define LPTIM_IER_ARRMIE_Pos (1U) -#define LPTIM_IER_ARRMIE_Msk (0x1UL << LPTIM_IER_ARRMIE_Pos) /*!< 0x00000002 */ -#define LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE_Msk /*!< Autoreload match Interrupt Enable */ -#define LPTIM_IER_EXTTRIGIE_Pos (2U) -#define LPTIM_IER_EXTTRIGIE_Msk (0x1UL << LPTIM_IER_EXTTRIGIE_Pos) /*!< 0x00000004 */ -#define LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE_Msk /*!< External trigger edge event Interrupt Enable */ -#define LPTIM_IER_CMPOKIE_Pos (3U) -#define LPTIM_IER_CMPOKIE_Msk (0x1UL << LPTIM_IER_CMPOKIE_Pos) /*!< 0x00000008 */ -#define LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE_Msk /*!< Compare register update OK Interrupt Enable */ -#define LPTIM_IER_ARROKIE_Pos (4U) -#define LPTIM_IER_ARROKIE_Msk (0x1UL << LPTIM_IER_ARROKIE_Pos) /*!< 0x00000010 */ -#define LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE_Msk /*!< Autoreload register update OK Interrupt Enable */ -#define LPTIM_IER_UPIE_Pos (5U) -#define LPTIM_IER_UPIE_Msk (0x1UL << LPTIM_IER_UPIE_Pos) /*!< 0x00000020 */ -#define LPTIM_IER_UPIE LPTIM_IER_UPIE_Msk /*!< Counter direction change down to up Interrupt Enable */ -#define LPTIM_IER_DOWNIE_Pos (6U) -#define LPTIM_IER_DOWNIE_Msk (0x1UL << LPTIM_IER_DOWNIE_Pos) /*!< 0x00000040 */ -#define LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE_Msk /*!< Counter direction change up to down Interrupt Enable */ - -/****************** Bit definition for LPTIM_CFGR register *******************/ -#define LPTIM_CFGR_CKSEL_Pos (0U) -#define LPTIM_CFGR_CKSEL_Msk (0x1UL << LPTIM_CFGR_CKSEL_Pos) /*!< 0x00000001 */ -#define LPTIM_CFGR_CKSEL LPTIM_CFGR_CKSEL_Msk /*!< Clock selector */ - -#define LPTIM_CFGR_CKPOL_Pos (1U) -#define LPTIM_CFGR_CKPOL_Msk (0x3UL << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000006 */ -#define LPTIM_CFGR_CKPOL LPTIM_CFGR_CKPOL_Msk /*!< CKPOL[1:0] bits (Clock polarity) */ -#define LPTIM_CFGR_CKPOL_0 (0x1UL << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000002 */ -#define LPTIM_CFGR_CKPOL_1 (0x2UL << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000004 */ - -#define LPTIM_CFGR_CKFLT_Pos (3U) -#define LPTIM_CFGR_CKFLT_Msk (0x3UL << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000018 */ -#define LPTIM_CFGR_CKFLT LPTIM_CFGR_CKFLT_Msk /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */ -#define LPTIM_CFGR_CKFLT_0 (0x1UL << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000008 */ -#define LPTIM_CFGR_CKFLT_1 (0x2UL << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000010 */ - -#define LPTIM_CFGR_TRGFLT_Pos (6U) -#define LPTIM_CFGR_TRGFLT_Msk (0x3UL << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x000000C0 */ -#define LPTIM_CFGR_TRGFLT LPTIM_CFGR_TRGFLT_Msk /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */ -#define LPTIM_CFGR_TRGFLT_0 (0x1UL << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x00000040 */ -#define LPTIM_CFGR_TRGFLT_1 (0x2UL << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x00000080 */ - -#define LPTIM_CFGR_PRESC_Pos (9U) -#define LPTIM_CFGR_PRESC_Msk (0x7UL << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000E00 */ -#define LPTIM_CFGR_PRESC LPTIM_CFGR_PRESC_Msk /*!< PRESC[2:0] bits (Clock prescaler) */ -#define LPTIM_CFGR_PRESC_0 (0x1UL << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000200 */ -#define LPTIM_CFGR_PRESC_1 (0x2UL << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000400 */ -#define LPTIM_CFGR_PRESC_2 (0x4UL << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000800 */ - -#define LPTIM_CFGR_TRIGSEL_Pos (13U) -#define LPTIM_CFGR_TRIGSEL_Msk (0x7UL << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x0000E000 */ -#define LPTIM_CFGR_TRIGSEL LPTIM_CFGR_TRIGSEL_Msk /*!< TRIGSEL[2:0]] bits (Trigger selector) */ -#define LPTIM_CFGR_TRIGSEL_0 (0x1UL << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00002000 */ -#define LPTIM_CFGR_TRIGSEL_1 (0x2UL << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00004000 */ -#define LPTIM_CFGR_TRIGSEL_2 (0x4UL << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00008000 */ - -#define LPTIM_CFGR_TRIGEN_Pos (17U) -#define LPTIM_CFGR_TRIGEN_Msk (0x3UL << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00060000 */ -#define LPTIM_CFGR_TRIGEN LPTIM_CFGR_TRIGEN_Msk /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */ -#define LPTIM_CFGR_TRIGEN_0 (0x1UL << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00020000 */ -#define LPTIM_CFGR_TRIGEN_1 (0x2UL << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00040000 */ - -#define LPTIM_CFGR_TIMOUT_Pos (19U) -#define LPTIM_CFGR_TIMOUT_Msk (0x1UL << LPTIM_CFGR_TIMOUT_Pos) /*!< 0x00080000 */ -#define LPTIM_CFGR_TIMOUT LPTIM_CFGR_TIMOUT_Msk /*!< Timout enable */ -#define LPTIM_CFGR_WAVE_Pos (20U) -#define LPTIM_CFGR_WAVE_Msk (0x1UL << LPTIM_CFGR_WAVE_Pos) /*!< 0x00100000 */ -#define LPTIM_CFGR_WAVE LPTIM_CFGR_WAVE_Msk /*!< Waveform shape */ -#define LPTIM_CFGR_WAVPOL_Pos (21U) -#define LPTIM_CFGR_WAVPOL_Msk (0x1UL << LPTIM_CFGR_WAVPOL_Pos) /*!< 0x00200000 */ -#define LPTIM_CFGR_WAVPOL LPTIM_CFGR_WAVPOL_Msk /*!< Waveform shape polarity */ -#define LPTIM_CFGR_PRELOAD_Pos (22U) -#define LPTIM_CFGR_PRELOAD_Msk (0x1UL << LPTIM_CFGR_PRELOAD_Pos) /*!< 0x00400000 */ -#define LPTIM_CFGR_PRELOAD LPTIM_CFGR_PRELOAD_Msk /*!< Reg update mode */ -#define LPTIM_CFGR_COUNTMODE_Pos (23U) -#define LPTIM_CFGR_COUNTMODE_Msk (0x1UL << LPTIM_CFGR_COUNTMODE_Pos) /*!< 0x00800000 */ -#define LPTIM_CFGR_COUNTMODE LPTIM_CFGR_COUNTMODE_Msk /*!< Counter mode enable */ -#define LPTIM_CFGR_ENC_Pos (24U) -#define LPTIM_CFGR_ENC_Msk (0x1UL << LPTIM_CFGR_ENC_Pos) /*!< 0x01000000 */ -#define LPTIM_CFGR_ENC LPTIM_CFGR_ENC_Msk /*!< Encoder mode enable */ - -/****************** Bit definition for LPTIM_CR register ********************/ -#define LPTIM_CR_ENABLE_Pos (0U) -#define LPTIM_CR_ENABLE_Msk (0x1UL << LPTIM_CR_ENABLE_Pos) /*!< 0x00000001 */ -#define LPTIM_CR_ENABLE LPTIM_CR_ENABLE_Msk /*!< LPTIMer enable */ -#define LPTIM_CR_SNGSTRT_Pos (1U) -#define LPTIM_CR_SNGSTRT_Msk (0x1UL << LPTIM_CR_SNGSTRT_Pos) /*!< 0x00000002 */ -#define LPTIM_CR_SNGSTRT LPTIM_CR_SNGSTRT_Msk /*!< Timer start in single mode */ -#define LPTIM_CR_CNTSTRT_Pos (2U) -#define LPTIM_CR_CNTSTRT_Msk (0x1UL << LPTIM_CR_CNTSTRT_Pos) /*!< 0x00000004 */ -#define LPTIM_CR_CNTSTRT LPTIM_CR_CNTSTRT_Msk /*!< Timer start in continuous mode */ - -/****************** Bit definition for LPTIM_CMP register *******************/ -#define LPTIM_CMP_CMP_Pos (0U) -#define LPTIM_CMP_CMP_Msk (0xFFFFUL << LPTIM_CMP_CMP_Pos) /*!< 0x0000FFFF */ -#define LPTIM_CMP_CMP LPTIM_CMP_CMP_Msk /*!< Compare register */ - -/****************** Bit definition for LPTIM_ARR register *******************/ -#define LPTIM_ARR_ARR_Pos (0U) -#define LPTIM_ARR_ARR_Msk (0xFFFFUL << LPTIM_ARR_ARR_Pos) /*!< 0x0000FFFF */ -#define LPTIM_ARR_ARR LPTIM_ARR_ARR_Msk /*!< Auto reload register */ - -/****************** Bit definition for LPTIM_CNT register *******************/ -#define LPTIM_CNT_CNT_Pos (0U) -#define LPTIM_CNT_CNT_Msk (0xFFFFUL << LPTIM_CNT_CNT_Pos) /*!< 0x0000FFFF */ -#define LPTIM_CNT_CNT LPTIM_CNT_CNT_Msk /*!< Counter register */ - -/******************************************************************************/ -/* */ -/* MIFARE Firewall */ -/* */ -/******************************************************************************/ - -/*******Bit definition for CSSA;CSL;NVDSSA;NVDSL;VDSSA;VDSL register */ -#define FW_CSSA_ADD_Pos (8U) -#define FW_CSSA_ADD_Msk (0xFFFFUL << FW_CSSA_ADD_Pos) /*!< 0x00FFFF00 */ -#define FW_CSSA_ADD FW_CSSA_ADD_Msk /*!< Code Segment Start Address */ -#define FW_CSL_LENG_Pos (8U) -#define FW_CSL_LENG_Msk (0x3FFFUL << FW_CSL_LENG_Pos) /*!< 0x003FFF00 */ -#define FW_CSL_LENG FW_CSL_LENG_Msk /*!< Code Segment Length */ -#define FW_NVDSSA_ADD_Pos (8U) -#define FW_NVDSSA_ADD_Msk (0xFFFFUL << FW_NVDSSA_ADD_Pos) /*!< 0x00FFFF00 */ -#define FW_NVDSSA_ADD FW_NVDSSA_ADD_Msk /*!< Non Volatile Dat Segment Start Address */ -#define FW_NVDSL_LENG_Pos (8U) -#define FW_NVDSL_LENG_Msk (0x3FFFUL << FW_NVDSL_LENG_Pos) /*!< 0x003FFF00 */ -#define FW_NVDSL_LENG FW_NVDSL_LENG_Msk /*!< Non Volatile Data Segment Length */ -#define FW_VDSSA_ADD_Pos (6U) -#define FW_VDSSA_ADD_Msk (0x3FFUL << FW_VDSSA_ADD_Pos) /*!< 0x0000FFC0 */ -#define FW_VDSSA_ADD FW_VDSSA_ADD_Msk /*!< Volatile Data Segment Start Address */ -#define FW_VDSL_LENG_Pos (6U) -#define FW_VDSL_LENG_Msk (0x3FFUL << FW_VDSL_LENG_Pos) /*!< 0x0000FFC0 */ -#define FW_VDSL_LENG FW_VDSL_LENG_Msk /*!< Volatile Data Segment Length */ - -/**************************Bit definition for CR register *********************/ -#define FW_CR_FPA_Pos (0U) -#define FW_CR_FPA_Msk (0x1UL << FW_CR_FPA_Pos) /*!< 0x00000001 */ -#define FW_CR_FPA FW_CR_FPA_Msk /*!< Firewall Pre Arm*/ -#define FW_CR_VDS_Pos (1U) -#define FW_CR_VDS_Msk (0x1UL << FW_CR_VDS_Pos) /*!< 0x00000002 */ -#define FW_CR_VDS FW_CR_VDS_Msk /*!< Volatile Data Sharing*/ -#define FW_CR_VDE_Pos (2U) -#define FW_CR_VDE_Msk (0x1UL << FW_CR_VDE_Pos) /*!< 0x00000004 */ -#define FW_CR_VDE FW_CR_VDE_Msk /*!< Volatile Data Execution*/ - -/******************************************************************************/ -/* */ -/* Power Control (PWR) */ -/* */ -/******************************************************************************/ - -#define PWR_PVD_SUPPORT /*!< PVD feature available on all devices: Power Voltage Detection feature */ - -/******************** Bit definition for PWR_CR register ********************/ -#define PWR_CR_LPSDSR_Pos (0U) -#define PWR_CR_LPSDSR_Msk (0x1UL << PWR_CR_LPSDSR_Pos) /*!< 0x00000001 */ -#define PWR_CR_LPSDSR PWR_CR_LPSDSR_Msk /*!< Low-power deepsleep/sleep/low power run */ -#define PWR_CR_PDDS_Pos (1U) -#define PWR_CR_PDDS_Msk (0x1UL << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ -#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ -#define PWR_CR_CWUF_Pos (2U) -#define PWR_CR_CWUF_Msk (0x1UL << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ -#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ -#define PWR_CR_CSBF_Pos (3U) -#define PWR_CR_CSBF_Msk (0x1UL << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ -#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ -#define PWR_CR_PVDE_Pos (4U) -#define PWR_CR_PVDE_Msk (0x1UL << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ -#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ - -#define PWR_CR_PLS_Pos (5U) -#define PWR_CR_PLS_Msk (0x7UL << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ -#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ -#define PWR_CR_PLS_0 (0x1UL << PWR_CR_PLS_Pos) /*!< 0x00000020 */ -#define PWR_CR_PLS_1 (0x2UL << PWR_CR_PLS_Pos) /*!< 0x00000040 */ -#define PWR_CR_PLS_2 (0x4UL << PWR_CR_PLS_Pos) /*!< 0x00000080 */ - -/*!< PVD level configuration */ -#define PWR_CR_PLS_LEV0 (0x00000000U) /*!< PVD level 0 */ -#define PWR_CR_PLS_LEV1 (0x00000020U) /*!< PVD level 1 */ -#define PWR_CR_PLS_LEV2 (0x00000040U) /*!< PVD level 2 */ -#define PWR_CR_PLS_LEV3 (0x00000060U) /*!< PVD level 3 */ -#define PWR_CR_PLS_LEV4 (0x00000080U) /*!< PVD level 4 */ -#define PWR_CR_PLS_LEV5 (0x000000A0U) /*!< PVD level 5 */ -#define PWR_CR_PLS_LEV6 (0x000000C0U) /*!< PVD level 6 */ -#define PWR_CR_PLS_LEV7 (0x000000E0U) /*!< PVD level 7 */ - -#define PWR_CR_DBP_Pos (8U) -#define PWR_CR_DBP_Msk (0x1UL << PWR_CR_DBP_Pos) /*!< 0x00000100 */ -#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ -#define PWR_CR_ULP_Pos (9U) -#define PWR_CR_ULP_Msk (0x1UL << PWR_CR_ULP_Pos) /*!< 0x00000200 */ -#define PWR_CR_ULP PWR_CR_ULP_Msk /*!< Ultra Low Power mode */ -#define PWR_CR_FWU_Pos (10U) -#define PWR_CR_FWU_Msk (0x1UL << PWR_CR_FWU_Pos) /*!< 0x00000400 */ -#define PWR_CR_FWU PWR_CR_FWU_Msk /*!< Fast wakeup */ - -#define PWR_CR_VOS_Pos (11U) -#define PWR_CR_VOS_Msk (0x3UL << PWR_CR_VOS_Pos) /*!< 0x00001800 */ -#define PWR_CR_VOS PWR_CR_VOS_Msk /*!< VOS[1:0] bits (Voltage scaling range selection) */ -#define PWR_CR_VOS_0 (0x1UL << PWR_CR_VOS_Pos) /*!< 0x00000800 */ -#define PWR_CR_VOS_1 (0x2UL << PWR_CR_VOS_Pos) /*!< 0x00001000 */ -#define PWR_CR_DSEEKOFF_Pos (13U) -#define PWR_CR_DSEEKOFF_Msk (0x1UL << PWR_CR_DSEEKOFF_Pos) /*!< 0x00002000 */ -#define PWR_CR_DSEEKOFF PWR_CR_DSEEKOFF_Msk /*!< Deep Sleep mode with EEPROM kept Off */ -#define PWR_CR_LPRUN_Pos (14U) -#define PWR_CR_LPRUN_Msk (0x1UL << PWR_CR_LPRUN_Pos) /*!< 0x00004000 */ -#define PWR_CR_LPRUN PWR_CR_LPRUN_Msk /*!< Low power run mode */ - -/******************* Bit definition for PWR_CSR register ********************/ -#define PWR_CSR_WUF_Pos (0U) -#define PWR_CSR_WUF_Msk (0x1UL << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ -#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ -#define PWR_CSR_SBF_Pos (1U) -#define PWR_CSR_SBF_Msk (0x1UL << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ -#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ -#define PWR_CSR_PVDO_Pos (2U) -#define PWR_CSR_PVDO_Msk (0x1UL << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ -#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ -#define PWR_CSR_VREFINTRDYF_Pos (3U) -#define PWR_CSR_VREFINTRDYF_Msk (0x1UL << PWR_CSR_VREFINTRDYF_Pos) /*!< 0x00000008 */ -#define PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF_Msk /*!< Internal voltage reference (VREFINT) ready flag */ -#define PWR_CSR_VOSF_Pos (4U) -#define PWR_CSR_VOSF_Msk (0x1UL << PWR_CSR_VOSF_Pos) /*!< 0x00000010 */ -#define PWR_CSR_VOSF PWR_CSR_VOSF_Msk /*!< Voltage Scaling select flag */ -#define PWR_CSR_REGLPF_Pos (5U) -#define PWR_CSR_REGLPF_Msk (0x1UL << PWR_CSR_REGLPF_Pos) /*!< 0x00000020 */ -#define PWR_CSR_REGLPF PWR_CSR_REGLPF_Msk /*!< Regulator LP flag */ - -#define PWR_CSR_EWUP1_Pos (8U) -#define PWR_CSR_EWUP1_Msk (0x1UL << PWR_CSR_EWUP1_Pos) /*!< 0x00000100 */ -#define PWR_CSR_EWUP1 PWR_CSR_EWUP1_Msk /*!< Enable WKUP pin 1 */ -#define PWR_CSR_EWUP2_Pos (9U) -#define PWR_CSR_EWUP2_Msk (0x1UL << PWR_CSR_EWUP2_Pos) /*!< 0x00000200 */ -#define PWR_CSR_EWUP2 PWR_CSR_EWUP2_Msk /*!< Enable WKUP pin 2 */ - -/******************************************************************************/ -/* */ -/* Reset and Clock Control */ -/* */ -/******************************************************************************/ - -#define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ - -/******************** Bit definition for RCC_CR register ********************/ -#define RCC_CR_HSION_Pos (0U) -#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ -#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ -#define RCC_CR_HSIKERON_Pos (1U) -#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000002 */ -#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed clock enable for some IPs Kernel */ -#define RCC_CR_HSIRDY_Pos (2U) -#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000004 */ -#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ -#define RCC_CR_HSIDIVEN_Pos (3U) -#define RCC_CR_HSIDIVEN_Msk (0x1UL << RCC_CR_HSIDIVEN_Pos) /*!< 0x00000008 */ -#define RCC_CR_HSIDIVEN RCC_CR_HSIDIVEN_Msk /*!< Internal High Speed clock divider enable */ -#define RCC_CR_HSIDIVF_Pos (4U) -#define RCC_CR_HSIDIVF_Msk (0x1UL << RCC_CR_HSIDIVF_Pos) /*!< 0x00000010 */ -#define RCC_CR_HSIDIVF RCC_CR_HSIDIVF_Msk /*!< Internal High Speed clock divider flag */ -#define RCC_CR_MSION_Pos (8U) -#define RCC_CR_MSION_Msk (0x1UL << RCC_CR_MSION_Pos) /*!< 0x00000100 */ -#define RCC_CR_MSION RCC_CR_MSION_Msk /*!< Internal Multi Speed clock enable */ -#define RCC_CR_MSIRDY_Pos (9U) -#define RCC_CR_MSIRDY_Msk (0x1UL << RCC_CR_MSIRDY_Pos) /*!< 0x00000200 */ -#define RCC_CR_MSIRDY RCC_CR_MSIRDY_Msk /*!< Internal Multi Speed clock ready flag */ -#define RCC_CR_HSEON_Pos (16U) -#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ -#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ -#define RCC_CR_HSERDY_Pos (17U) -#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ -#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ -#define RCC_CR_HSEBYP_Pos (18U) -#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ -#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ -#define RCC_CR_CSSHSEON_Pos (19U) -#define RCC_CR_CSSHSEON_Msk (0x1UL << RCC_CR_CSSHSEON_Pos) /*!< 0x00080000 */ -#define RCC_CR_CSSHSEON RCC_CR_CSSHSEON_Msk /*!< HSE Clock Security System enable */ -#define RCC_CR_RTCPRE_Pos (20U) -#define RCC_CR_RTCPRE_Msk (0x3UL << RCC_CR_RTCPRE_Pos) /*!< 0x00300000 */ -#define RCC_CR_RTCPRE RCC_CR_RTCPRE_Msk /*!< RTC prescaler [1:0] bits */ -#define RCC_CR_RTCPRE_0 (0x1UL << RCC_CR_RTCPRE_Pos) /*!< 0x00100000 */ -#define RCC_CR_RTCPRE_1 (0x2UL << RCC_CR_RTCPRE_Pos) /*!< 0x00200000 */ -#define RCC_CR_PLLON_Pos (24U) -#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ -#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ -#define RCC_CR_PLLRDY_Pos (25U) -#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ -#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ - -/* Reference defines */ -#define RCC_CR_CSSON RCC_CR_CSSHSEON - -/******************** Bit definition for RCC_ICSCR register *****************/ -#define RCC_ICSCR_HSICAL_Pos (0U) -#define RCC_ICSCR_HSICAL_Msk (0xFFUL << RCC_ICSCR_HSICAL_Pos) /*!< 0x000000FF */ -#define RCC_ICSCR_HSICAL RCC_ICSCR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ -#define RCC_ICSCR_HSITRIM_Pos (8U) -#define RCC_ICSCR_HSITRIM_Msk (0x1FUL << RCC_ICSCR_HSITRIM_Pos) /*!< 0x00001F00 */ -#define RCC_ICSCR_HSITRIM RCC_ICSCR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ - -#define RCC_ICSCR_MSIRANGE_Pos (13U) -#define RCC_ICSCR_MSIRANGE_Msk (0x7UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x0000E000 */ -#define RCC_ICSCR_MSIRANGE RCC_ICSCR_MSIRANGE_Msk /*!< Internal Multi Speed clock Range */ -#define RCC_ICSCR_MSIRANGE_0 (0x0UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x00000000 */ -#define RCC_ICSCR_MSIRANGE_1 (0x1UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x00002000 */ -#define RCC_ICSCR_MSIRANGE_2 (0x2UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x00004000 */ -#define RCC_ICSCR_MSIRANGE_3 (0x3UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x00006000 */ -#define RCC_ICSCR_MSIRANGE_4 (0x4UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x00008000 */ -#define RCC_ICSCR_MSIRANGE_5 (0x5UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x0000A000 */ -#define RCC_ICSCR_MSIRANGE_6 (0x6UL << RCC_ICSCR_MSIRANGE_Pos) /*!< 0x0000C000 */ -#define RCC_ICSCR_MSICAL_Pos (16U) -#define RCC_ICSCR_MSICAL_Msk (0xFFUL << RCC_ICSCR_MSICAL_Pos) /*!< 0x00FF0000 */ -#define RCC_ICSCR_MSICAL RCC_ICSCR_MSICAL_Msk /*!< Internal Multi Speed clock Calibration */ -#define RCC_ICSCR_MSITRIM_Pos (24U) -#define RCC_ICSCR_MSITRIM_Msk (0xFFUL << RCC_ICSCR_MSITRIM_Pos) /*!< 0xFF000000 */ -#define RCC_ICSCR_MSITRIM RCC_ICSCR_MSITRIM_Msk /*!< Internal Multi Speed clock trimming */ - - -/******************* Bit definition for RCC_CFGR register *******************/ -/*!< SW configuration */ -#define RCC_CFGR_SW_Pos (0U) -#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ -#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ -#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ -#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ - -#define RCC_CFGR_SW_MSI (0x00000000U) /*!< MSI selected as system clock */ -#define RCC_CFGR_SW_HSI (0x00000001U) /*!< HSI selected as system clock */ -#define RCC_CFGR_SW_HSE (0x00000002U) /*!< HSE selected as system clock */ -#define RCC_CFGR_SW_PLL (0x00000003U) /*!< PLL selected as system clock */ - -/*!< SWS configuration */ -#define RCC_CFGR_SWS_Pos (2U) -#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ -#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ -#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ -#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ - -#define RCC_CFGR_SWS_MSI (0x00000000U) /*!< MSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSI (0x00000004U) /*!< HSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSE (0x00000008U) /*!< HSE oscillator used as system clock */ -#define RCC_CFGR_SWS_PLL (0x0000000CU) /*!< PLL used as system clock */ - -/*!< HPRE configuration */ -#define RCC_CFGR_HPRE_Pos (4U) -#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ -#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ -#define RCC_CFGR_HPRE_0 (0x1UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ -#define RCC_CFGR_HPRE_1 (0x2UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ -#define RCC_CFGR_HPRE_2 (0x4UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ -#define RCC_CFGR_HPRE_3 (0x8UL << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ - -#define RCC_CFGR_HPRE_DIV1 (0x00000000U) /*!< SYSCLK not divided */ -#define RCC_CFGR_HPRE_DIV2 (0x00000080U) /*!< SYSCLK divided by 2 */ -#define RCC_CFGR_HPRE_DIV4 (0x00000090U) /*!< SYSCLK divided by 4 */ -#define RCC_CFGR_HPRE_DIV8 (0x000000A0U) /*!< SYSCLK divided by 8 */ -#define RCC_CFGR_HPRE_DIV16 (0x000000B0U) /*!< SYSCLK divided by 16 */ -#define RCC_CFGR_HPRE_DIV64 (0x000000C0U) /*!< SYSCLK divided by 64 */ -#define RCC_CFGR_HPRE_DIV128 (0x000000D0U) /*!< SYSCLK divided by 128 */ -#define RCC_CFGR_HPRE_DIV256 (0x000000E0U) /*!< SYSCLK divided by 256 */ -#define RCC_CFGR_HPRE_DIV512 (0x000000F0U) /*!< SYSCLK divided by 512 */ - -/*!< PPRE1 configuration */ -#define RCC_CFGR_PPRE1_Pos (8U) -#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ -#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ -#define RCC_CFGR_PPRE1_0 (0x1UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ -#define RCC_CFGR_PPRE1_1 (0x2UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ -#define RCC_CFGR_PPRE1_2 (0x4UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ - -#define RCC_CFGR_PPRE1_DIV1 (0x00000000U) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE1_DIV2 (0x00000400U) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE1_DIV4 (0x00000500U) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE1_DIV8 (0x00000600U) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE1_DIV16 (0x00000700U) /*!< HCLK divided by 16 */ - -/*!< PPRE2 configuration */ -#define RCC_CFGR_PPRE2_Pos (11U) -#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ -#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ -#define RCC_CFGR_PPRE2_0 (0x1UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ -#define RCC_CFGR_PPRE2_1 (0x2UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ -#define RCC_CFGR_PPRE2_2 (0x4UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ - -#define RCC_CFGR_PPRE2_DIV1 (0x00000000U) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE2_DIV2 (0x00002000U) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE2_DIV4 (0x00002800U) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE2_DIV8 (0x00003000U) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE2_DIV16 (0x00003800U) /*!< HCLK divided by 16 */ - -#define RCC_CFGR_STOPWUCK_Pos (15U) -#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00008000 */ -#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from Stop Clock selection */ - -/*!< PLL entry clock source*/ -#define RCC_CFGR_PLLSRC_Pos (16U) -#define RCC_CFGR_PLLSRC_Msk (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ -#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ - -#define RCC_CFGR_PLLSRC_HSI (0x00000000U) /*!< HSI as PLL entry clock source */ -#define RCC_CFGR_PLLSRC_HSE (0x00010000U) /*!< HSE as PLL entry clock source */ - - -/*!< PLLMUL configuration */ -#define RCC_CFGR_PLLMUL_Pos (18U) -#define RCC_CFGR_PLLMUL_Msk (0xFUL << RCC_CFGR_PLLMUL_Pos) /*!< 0x003C0000 */ -#define RCC_CFGR_PLLMUL RCC_CFGR_PLLMUL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ -#define RCC_CFGR_PLLMUL_0 (0x1UL << RCC_CFGR_PLLMUL_Pos) /*!< 0x00040000 */ -#define RCC_CFGR_PLLMUL_1 (0x2UL << RCC_CFGR_PLLMUL_Pos) /*!< 0x00080000 */ -#define RCC_CFGR_PLLMUL_2 (0x4UL << RCC_CFGR_PLLMUL_Pos) /*!< 0x00100000 */ -#define RCC_CFGR_PLLMUL_3 (0x8UL << RCC_CFGR_PLLMUL_Pos) /*!< 0x00200000 */ - -#define RCC_CFGR_PLLMUL3 (0x00000000U) /*!< PLL input clock * 3 */ -#define RCC_CFGR_PLLMUL4 (0x00040000U) /*!< PLL input clock * 4 */ -#define RCC_CFGR_PLLMUL6 (0x00080000U) /*!< PLL input clock * 6 */ -#define RCC_CFGR_PLLMUL8 (0x000C0000U) /*!< PLL input clock * 8 */ -#define RCC_CFGR_PLLMUL12 (0x00100000U) /*!< PLL input clock * 12 */ -#define RCC_CFGR_PLLMUL16 (0x00140000U) /*!< PLL input clock * 16 */ -#define RCC_CFGR_PLLMUL24 (0x00180000U) /*!< PLL input clock * 24 */ -#define RCC_CFGR_PLLMUL32 (0x001C0000U) /*!< PLL input clock * 32 */ -#define RCC_CFGR_PLLMUL48 (0x00200000U) /*!< PLL input clock * 48 */ - -/*!< PLLDIV configuration */ -#define RCC_CFGR_PLLDIV_Pos (22U) -#define RCC_CFGR_PLLDIV_Msk (0x3UL << RCC_CFGR_PLLDIV_Pos) /*!< 0x00C00000 */ -#define RCC_CFGR_PLLDIV RCC_CFGR_PLLDIV_Msk /*!< PLLDIV[1:0] bits (PLL Output Division) */ -#define RCC_CFGR_PLLDIV_0 (0x1UL << RCC_CFGR_PLLDIV_Pos) /*!< 0x00400000 */ -#define RCC_CFGR_PLLDIV_1 (0x2UL << RCC_CFGR_PLLDIV_Pos) /*!< 0x00800000 */ - -#define RCC_CFGR_PLLDIV2_Pos (22U) -#define RCC_CFGR_PLLDIV2_Msk (0x1UL << RCC_CFGR_PLLDIV2_Pos) /*!< 0x00400000 */ -#define RCC_CFGR_PLLDIV2 RCC_CFGR_PLLDIV2_Msk /*!< PLL clock output = CKVCO / 2 */ -#define RCC_CFGR_PLLDIV3_Pos (23U) -#define RCC_CFGR_PLLDIV3_Msk (0x1UL << RCC_CFGR_PLLDIV3_Pos) /*!< 0x00800000 */ -#define RCC_CFGR_PLLDIV3 RCC_CFGR_PLLDIV3_Msk /*!< PLL clock output = CKVCO / 3 */ -#define RCC_CFGR_PLLDIV4_Pos (22U) -#define RCC_CFGR_PLLDIV4_Msk (0x3UL << RCC_CFGR_PLLDIV4_Pos) /*!< 0x00C00000 */ -#define RCC_CFGR_PLLDIV4 RCC_CFGR_PLLDIV4_Msk /*!< PLL clock output = CKVCO / 4 */ - -/*!< MCO configuration */ -#define RCC_CFGR_MCOSEL_Pos (24U) -#define RCC_CFGR_MCOSEL_Msk (0xFUL << RCC_CFGR_MCOSEL_Pos) /*!< 0x0F000000 */ -#define RCC_CFGR_MCOSEL RCC_CFGR_MCOSEL_Msk /*!< MCO[3:0] bits (Microcontroller Clock Output) */ -#define RCC_CFGR_MCOSEL_0 (0x1UL << RCC_CFGR_MCOSEL_Pos) /*!< 0x01000000 */ -#define RCC_CFGR_MCOSEL_1 (0x2UL << RCC_CFGR_MCOSEL_Pos) /*!< 0x02000000 */ -#define RCC_CFGR_MCOSEL_2 (0x4UL << RCC_CFGR_MCOSEL_Pos) /*!< 0x04000000 */ -#define RCC_CFGR_MCOSEL_3 (0x8UL << RCC_CFGR_MCOSEL_Pos) /*!< 0x08000000 */ - -#define RCC_CFGR_MCOSEL_NOCLOCK (0x00000000U) /*!< No clock */ -#define RCC_CFGR_MCOSEL_SYSCLK_Pos (24U) -#define RCC_CFGR_MCOSEL_SYSCLK_Msk (0x1UL << RCC_CFGR_MCOSEL_SYSCLK_Pos) /*!< 0x01000000 */ -#define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCOSEL_SYSCLK_Msk /*!< System clock selected as MCO source */ -#define RCC_CFGR_MCOSEL_HSI_Pos (25U) -#define RCC_CFGR_MCOSEL_HSI_Msk (0x1UL << RCC_CFGR_MCOSEL_HSI_Pos) /*!< 0x02000000 */ -#define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCOSEL_HSI_Msk /*!< Internal 16 MHz RC oscillator clock selected */ -#define RCC_CFGR_MCOSEL_MSI_Pos (24U) -#define RCC_CFGR_MCOSEL_MSI_Msk (0x3UL << RCC_CFGR_MCOSEL_MSI_Pos) /*!< 0x03000000 */ -#define RCC_CFGR_MCOSEL_MSI RCC_CFGR_MCOSEL_MSI_Msk /*!< Internal Medium Speed RC oscillator clock selected */ -#define RCC_CFGR_MCOSEL_HSE_Pos (26U) -#define RCC_CFGR_MCOSEL_HSE_Msk (0x1UL << RCC_CFGR_MCOSEL_HSE_Pos) /*!< 0x04000000 */ -#define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCOSEL_HSE_Msk /*!< External 1-25 MHz oscillator clock selected */ -#define RCC_CFGR_MCOSEL_PLL_Pos (24U) -#define RCC_CFGR_MCOSEL_PLL_Msk (0x5UL << RCC_CFGR_MCOSEL_PLL_Pos) /*!< 0x05000000 */ -#define RCC_CFGR_MCOSEL_PLL RCC_CFGR_MCOSEL_PLL_Msk /*!< PLL clock divided */ -#define RCC_CFGR_MCOSEL_LSI_Pos (25U) -#define RCC_CFGR_MCOSEL_LSI_Msk (0x3UL << RCC_CFGR_MCOSEL_LSI_Pos) /*!< 0x06000000 */ -#define RCC_CFGR_MCOSEL_LSI RCC_CFGR_MCOSEL_LSI_Msk /*!< LSI selected */ -#define RCC_CFGR_MCOSEL_LSE_Pos (24U) -#define RCC_CFGR_MCOSEL_LSE_Msk (0x7UL << RCC_CFGR_MCOSEL_LSE_Pos) /*!< 0x07000000 */ -#define RCC_CFGR_MCOSEL_LSE RCC_CFGR_MCOSEL_LSE_Msk /*!< LSE selected */ - -#define RCC_CFGR_MCOPRE_Pos (28U) -#define RCC_CFGR_MCOPRE_Msk (0x7UL << RCC_CFGR_MCOPRE_Pos) /*!< 0x70000000 */ -#define RCC_CFGR_MCOPRE RCC_CFGR_MCOPRE_Msk /*!< MCO prescaler */ -#define RCC_CFGR_MCOPRE_0 (0x1UL << RCC_CFGR_MCOPRE_Pos) /*!< 0x10000000 */ -#define RCC_CFGR_MCOPRE_1 (0x2UL << RCC_CFGR_MCOPRE_Pos) /*!< 0x20000000 */ -#define RCC_CFGR_MCOPRE_2 (0x4UL << RCC_CFGR_MCOPRE_Pos) /*!< 0x40000000 */ - -#define RCC_CFGR_MCOPRE_DIV1 (0x00000000U) /*!< MCO is divided by 1 */ -#define RCC_CFGR_MCOPRE_DIV2 (0x10000000U) /*!< MCO is divided by 2 */ -#define RCC_CFGR_MCOPRE_DIV4 (0x20000000U) /*!< MCO is divided by 4 */ -#define RCC_CFGR_MCOPRE_DIV8 (0x30000000U) /*!< MCO is divided by 8 */ -#define RCC_CFGR_MCOPRE_DIV16 (0x40000000U) /*!< MCO is divided by 16 */ - -/* Legacy defines */ -#define RCC_CFGR_MCO_NOCLOCK RCC_CFGR_MCOSEL_NOCLOCK -#define RCC_CFGR_MCO_SYSCLK RCC_CFGR_MCOSEL_SYSCLK -#define RCC_CFGR_MCO_HSI RCC_CFGR_MCOSEL_HSI -#define RCC_CFGR_MCO_MSI RCC_CFGR_MCOSEL_MSI -#define RCC_CFGR_MCO_HSE RCC_CFGR_MCOSEL_HSE -#define RCC_CFGR_MCO_PLL RCC_CFGR_MCOSEL_PLL -#define RCC_CFGR_MCO_LSI RCC_CFGR_MCOSEL_LSI -#define RCC_CFGR_MCO_LSE RCC_CFGR_MCOSEL_LSE -#ifdef RCC_CFGR_MCOSEL_HSI48 -#define RCC_CFGR_MCO_HSI48 RCC_CFGR_MCOSEL_HSI48 -#endif - -#define RCC_CFGR_MCO_PRE RCC_CFGR_MCOPRE /*!< MCO prescaler */ -#define RCC_CFGR_MCO_PRE_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO is divided by 1 */ -#define RCC_CFGR_MCO_PRE_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO is divided by 1 */ -#define RCC_CFGR_MCO_PRE_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO is divided by 1 */ -#define RCC_CFGR_MCO_PRE_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO is divided by 1 */ -#define RCC_CFGR_MCO_PRE_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO is divided by 1 */ - -/*!<****************** Bit definition for RCC_CIER register ********************/ -#define RCC_CIER_LSIRDYIE_Pos (0U) -#define RCC_CIER_LSIRDYIE_Msk (0x1UL << RCC_CIER_LSIRDYIE_Pos) /*!< 0x00000001 */ -#define RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ -#define RCC_CIER_LSERDYIE_Pos (1U) -#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ -#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ -#define RCC_CIER_HSIRDYIE_Pos (2U) -#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000004 */ -#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ -#define RCC_CIER_HSERDYIE_Pos (3U) -#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000008 */ -#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ -#define RCC_CIER_PLLRDYIE_Pos (4U) -#define RCC_CIER_PLLRDYIE_Msk (0x1UL << RCC_CIER_PLLRDYIE_Pos) /*!< 0x00000010 */ -#define RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ -#define RCC_CIER_MSIRDYIE_Pos (5U) -#define RCC_CIER_MSIRDYIE_Msk (0x1UL << RCC_CIER_MSIRDYIE_Pos) /*!< 0x00000020 */ -#define RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE_Msk /*!< MSI Ready Interrupt Enable */ -#define RCC_CIER_CSSLSE_Pos (7U) -#define RCC_CIER_CSSLSE_Msk (0x1UL << RCC_CIER_CSSLSE_Pos) /*!< 0x00000080 */ -#define RCC_CIER_CSSLSE RCC_CIER_CSSLSE_Msk /*!< LSE CSS Interrupt Enable */ - -/* Reference defines */ -#define RCC_CIER_LSECSSIE RCC_CIER_CSSLSE - -/*!<****************** Bit definition for RCC_CIFR register ********************/ -#define RCC_CIFR_LSIRDYF_Pos (0U) -#define RCC_CIFR_LSIRDYF_Msk (0x1UL << RCC_CIFR_LSIRDYF_Pos) /*!< 0x00000001 */ -#define RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ -#define RCC_CIFR_LSERDYF_Pos (1U) -#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ -#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ -#define RCC_CIFR_HSIRDYF_Pos (2U) -#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000004 */ -#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ -#define RCC_CIFR_HSERDYF_Pos (3U) -#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000008 */ -#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ -#define RCC_CIFR_PLLRDYF_Pos (4U) -#define RCC_CIFR_PLLRDYF_Msk (0x1UL << RCC_CIFR_PLLRDYF_Pos) /*!< 0x00000010 */ -#define RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ -#define RCC_CIFR_MSIRDYF_Pos (5U) -#define RCC_CIFR_MSIRDYF_Msk (0x1UL << RCC_CIFR_MSIRDYF_Pos) /*!< 0x00000020 */ -#define RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF_Msk /*!< MSI Ready Interrupt flag */ -#define RCC_CIFR_CSSLSEF_Pos (7U) -#define RCC_CIFR_CSSLSEF_Msk (0x1UL << RCC_CIFR_CSSLSEF_Pos) /*!< 0x00000080 */ -#define RCC_CIFR_CSSLSEF RCC_CIFR_CSSLSEF_Msk /*!< LSE Clock Security System Interrupt flag */ -#define RCC_CIFR_CSSHSEF_Pos (8U) -#define RCC_CIFR_CSSHSEF_Msk (0x1UL << RCC_CIFR_CSSHSEF_Pos) /*!< 0x00000100 */ -#define RCC_CIFR_CSSHSEF RCC_CIFR_CSSHSEF_Msk /*!< HSE Clock Security System Interrupt flag */ - -/* Reference defines */ -#define RCC_CIFR_LSECSSF RCC_CIFR_CSSLSEF -#define RCC_CIFR_CSSF RCC_CIFR_CSSHSEF - -/*!<****************** Bit definition for RCC_CICR register ********************/ -#define RCC_CICR_LSIRDYC_Pos (0U) -#define RCC_CICR_LSIRDYC_Msk (0x1UL << RCC_CICR_LSIRDYC_Pos) /*!< 0x00000001 */ -#define RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ -#define RCC_CICR_LSERDYC_Pos (1U) -#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ -#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ -#define RCC_CICR_HSIRDYC_Pos (2U) -#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000004 */ -#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ -#define RCC_CICR_HSERDYC_Pos (3U) -#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000008 */ -#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ -#define RCC_CICR_PLLRDYC_Pos (4U) -#define RCC_CICR_PLLRDYC_Msk (0x1UL << RCC_CICR_PLLRDYC_Pos) /*!< 0x00000010 */ -#define RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ -#define RCC_CICR_MSIRDYC_Pos (5U) -#define RCC_CICR_MSIRDYC_Msk (0x1UL << RCC_CICR_MSIRDYC_Pos) /*!< 0x00000020 */ -#define RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC_Msk /*!< MSI Ready Interrupt Clear */ -#define RCC_CICR_CSSLSEC_Pos (7U) -#define RCC_CICR_CSSLSEC_Msk (0x1UL << RCC_CICR_CSSLSEC_Pos) /*!< 0x00000080 */ -#define RCC_CICR_CSSLSEC RCC_CICR_CSSLSEC_Msk /*!< LSE Clock Security System Interrupt Clear */ -#define RCC_CICR_CSSHSEC_Pos (8U) -#define RCC_CICR_CSSHSEC_Msk (0x1UL << RCC_CICR_CSSHSEC_Pos) /*!< 0x00000100 */ -#define RCC_CICR_CSSHSEC RCC_CICR_CSSHSEC_Msk /*!< HSE Clock Security System Interrupt Clear */ - -/* Reference defines */ -#define RCC_CICR_LSECSSC RCC_CICR_CSSLSEC -#define RCC_CICR_CSSC RCC_CICR_CSSHSEC -/***************** Bit definition for RCC_IOPRSTR register ******************/ -#define RCC_IOPRSTR_IOPARST_Pos (0U) -#define RCC_IOPRSTR_IOPARST_Msk (0x1UL << RCC_IOPRSTR_IOPARST_Pos) /*!< 0x00000001 */ -#define RCC_IOPRSTR_IOPARST RCC_IOPRSTR_IOPARST_Msk /*!< GPIO port A reset */ -#define RCC_IOPRSTR_IOPBRST_Pos (1U) -#define RCC_IOPRSTR_IOPBRST_Msk (0x1UL << RCC_IOPRSTR_IOPBRST_Pos) /*!< 0x00000002 */ -#define RCC_IOPRSTR_IOPBRST RCC_IOPRSTR_IOPBRST_Msk /*!< GPIO port B reset */ -#define RCC_IOPRSTR_IOPCRST_Pos (2U) -#define RCC_IOPRSTR_IOPCRST_Msk (0x1UL << RCC_IOPRSTR_IOPCRST_Pos) /*!< 0x00000004 */ -#define RCC_IOPRSTR_IOPCRST RCC_IOPRSTR_IOPCRST_Msk /*!< GPIO port C reset */ -#define RCC_IOPRSTR_IOPDRST_Pos (3U) -#define RCC_IOPRSTR_IOPDRST_Msk (0x1UL << RCC_IOPRSTR_IOPDRST_Pos) /*!< 0x00000008 */ -#define RCC_IOPRSTR_IOPDRST RCC_IOPRSTR_IOPDRST_Msk /*!< GPIO port D reset */ -#define RCC_IOPRSTR_IOPHRST_Pos (7U) -#define RCC_IOPRSTR_IOPHRST_Msk (0x1UL << RCC_IOPRSTR_IOPHRST_Pos) /*!< 0x00000080 */ -#define RCC_IOPRSTR_IOPHRST RCC_IOPRSTR_IOPHRST_Msk /*!< GPIO port H reset */ - -/* Reference defines */ -#define RCC_IOPRSTR_GPIOARST RCC_IOPRSTR_IOPARST /*!< GPIO port A reset */ -#define RCC_IOPRSTR_GPIOBRST RCC_IOPRSTR_IOPBRST /*!< GPIO port B reset */ -#define RCC_IOPRSTR_GPIOCRST RCC_IOPRSTR_IOPCRST /*!< GPIO port C reset */ -#define RCC_IOPRSTR_GPIODRST RCC_IOPRSTR_IOPDRST /*!< GPIO port D reset */ -#define RCC_IOPRSTR_GPIOHRST RCC_IOPRSTR_IOPHRST /*!< GPIO port H reset */ - - -/****************** Bit definition for RCC_AHBRST register ******************/ -#define RCC_AHBRSTR_DMARST_Pos (0U) -#define RCC_AHBRSTR_DMARST_Msk (0x1UL << RCC_AHBRSTR_DMARST_Pos) /*!< 0x00000001 */ -#define RCC_AHBRSTR_DMARST RCC_AHBRSTR_DMARST_Msk /*!< DMA1 reset */ -#define RCC_AHBRSTR_MIFRST_Pos (8U) -#define RCC_AHBRSTR_MIFRST_Msk (0x1UL << RCC_AHBRSTR_MIFRST_Pos) /*!< 0x00000100 */ -#define RCC_AHBRSTR_MIFRST RCC_AHBRSTR_MIFRST_Msk /*!< Memory interface reset */ -#define RCC_AHBRSTR_CRCRST_Pos (12U) -#define RCC_AHBRSTR_CRCRST_Msk (0x1UL << RCC_AHBRSTR_CRCRST_Pos) /*!< 0x00001000 */ -#define RCC_AHBRSTR_CRCRST RCC_AHBRSTR_CRCRST_Msk /*!< CRC reset */ -#define RCC_AHBRSTR_CRYPRST_Pos (24U) -#define RCC_AHBRSTR_CRYPRST_Msk (0x1UL << RCC_AHBRSTR_CRYPRST_Pos) /*!< 0x01000000 */ -#define RCC_AHBRSTR_CRYPRST RCC_AHBRSTR_CRYPRST_Msk /*!< Crypto reset */ - -/* Reference defines */ -#define RCC_AHBRSTR_DMA1RST RCC_AHBRSTR_DMARST /*!< DMA1 reset */ - -/***************** Bit definition for RCC_APB2RSTR register *****************/ -#define RCC_APB2RSTR_SYSCFGRST_Pos (0U) -#define RCC_APB2RSTR_SYSCFGRST_Msk (0x1UL << RCC_APB2RSTR_SYSCFGRST_Pos) /*!< 0x00000001 */ -#define RCC_APB2RSTR_SYSCFGRST RCC_APB2RSTR_SYSCFGRST_Msk /*!< SYSCFG reset */ -#define RCC_APB2RSTR_TIM21RST_Pos (2U) -#define RCC_APB2RSTR_TIM21RST_Msk (0x1UL << RCC_APB2RSTR_TIM21RST_Pos) /*!< 0x00000004 */ -#define RCC_APB2RSTR_TIM21RST RCC_APB2RSTR_TIM21RST_Msk /*!< TIM21 reset */ -#define RCC_APB2RSTR_TIM22RST_Pos (5U) -#define RCC_APB2RSTR_TIM22RST_Msk (0x1UL << RCC_APB2RSTR_TIM22RST_Pos) /*!< 0x00000020 */ -#define RCC_APB2RSTR_TIM22RST RCC_APB2RSTR_TIM22RST_Msk /*!< TIM22 reset */ -#define RCC_APB2RSTR_ADCRST_Pos (9U) -#define RCC_APB2RSTR_ADCRST_Msk (0x1UL << RCC_APB2RSTR_ADCRST_Pos) /*!< 0x00000200 */ -#define RCC_APB2RSTR_ADCRST RCC_APB2RSTR_ADCRST_Msk /*!< ADC1 reset */ -#define RCC_APB2RSTR_SPI1RST_Pos (12U) -#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ -#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI1 reset */ -#define RCC_APB2RSTR_USART1RST_Pos (14U) -#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ -#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ -#define RCC_APB2RSTR_DBGRST_Pos (22U) -#define RCC_APB2RSTR_DBGRST_Msk (0x1UL << RCC_APB2RSTR_DBGRST_Pos) /*!< 0x00400000 */ -#define RCC_APB2RSTR_DBGRST RCC_APB2RSTR_DBGRST_Msk /*!< DBGMCU reset */ - -/* Reference defines */ -#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST /*!< ADC1 reset */ -#define RCC_APB2RSTR_DBGMCURST RCC_APB2RSTR_DBGRST /*!< DBGMCU reset */ - -/***************** Bit definition for RCC_APB1RSTR register *****************/ -#define RCC_APB1RSTR_TIM2RST_Pos (0U) -#define RCC_APB1RSTR_TIM2RST_Msk (0x1UL << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ -#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ -#define RCC_APB1RSTR_TIM6RST_Pos (4U) -#define RCC_APB1RSTR_TIM6RST_Msk (0x1UL << RCC_APB1RSTR_TIM6RST_Pos) /*!< 0x00000010 */ -#define RCC_APB1RSTR_TIM6RST RCC_APB1RSTR_TIM6RST_Msk /*!< Timer 6 reset */ -#define RCC_APB1RSTR_WWDGRST_Pos (11U) -#define RCC_APB1RSTR_WWDGRST_Msk (0x1UL << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ -#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ -#define RCC_APB1RSTR_SPI2RST_Pos (14U) -#define RCC_APB1RSTR_SPI2RST_Msk (0x1UL << RCC_APB1RSTR_SPI2RST_Pos) /*!< 0x00004000 */ -#define RCC_APB1RSTR_SPI2RST RCC_APB1RSTR_SPI2RST_Msk /*!< SPI2 reset */ -#define RCC_APB1RSTR_USART2RST_Pos (17U) -#define RCC_APB1RSTR_USART2RST_Msk (0x1UL << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ -#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ -#define RCC_APB1RSTR_LPUART1RST_Pos (18U) -#define RCC_APB1RSTR_LPUART1RST_Msk (0x1UL << RCC_APB1RSTR_LPUART1RST_Pos) /*!< 0x00040000 */ -#define RCC_APB1RSTR_LPUART1RST RCC_APB1RSTR_LPUART1RST_Msk /*!< LPUART1 reset */ -#define RCC_APB1RSTR_I2C1RST_Pos (21U) -#define RCC_APB1RSTR_I2C1RST_Msk (0x1UL << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ -#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ -#define RCC_APB1RSTR_I2C2RST_Pos (22U) -#define RCC_APB1RSTR_I2C2RST_Msk (0x1UL << RCC_APB1RSTR_I2C2RST_Pos) /*!< 0x00400000 */ -#define RCC_APB1RSTR_I2C2RST RCC_APB1RSTR_I2C2RST_Msk /*!< I2C 2 reset */ -#define RCC_APB1RSTR_PWRRST_Pos (28U) -#define RCC_APB1RSTR_PWRRST_Msk (0x1UL << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ -#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< PWR reset */ -#define RCC_APB1RSTR_LPTIM1RST_Pos (31U) -#define RCC_APB1RSTR_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR_LPTIM1RST_Pos) /*!< 0x80000000 */ -#define RCC_APB1RSTR_LPTIM1RST RCC_APB1RSTR_LPTIM1RST_Msk /*!< LPTIM1 reset */ - -/***************** Bit definition for RCC_IOPENR register ******************/ -#define RCC_IOPENR_IOPAEN_Pos (0U) -#define RCC_IOPENR_IOPAEN_Msk (0x1UL << RCC_IOPENR_IOPAEN_Pos) /*!< 0x00000001 */ -#define RCC_IOPENR_IOPAEN RCC_IOPENR_IOPAEN_Msk /*!< GPIO port A clock enable */ -#define RCC_IOPENR_IOPBEN_Pos (1U) -#define RCC_IOPENR_IOPBEN_Msk (0x1UL << RCC_IOPENR_IOPBEN_Pos) /*!< 0x00000002 */ -#define RCC_IOPENR_IOPBEN RCC_IOPENR_IOPBEN_Msk /*!< GPIO port B clock enable */ -#define RCC_IOPENR_IOPCEN_Pos (2U) -#define RCC_IOPENR_IOPCEN_Msk (0x1UL << RCC_IOPENR_IOPCEN_Pos) /*!< 0x00000004 */ -#define RCC_IOPENR_IOPCEN RCC_IOPENR_IOPCEN_Msk /*!< GPIO port C clock enable */ -#define RCC_IOPENR_IOPDEN_Pos (3U) -#define RCC_IOPENR_IOPDEN_Msk (0x1UL << RCC_IOPENR_IOPDEN_Pos) /*!< 0x00000008 */ -#define RCC_IOPENR_IOPDEN RCC_IOPENR_IOPDEN_Msk /*!< GPIO port D clock enable */ -#define RCC_IOPENR_IOPHEN_Pos (7U) -#define RCC_IOPENR_IOPHEN_Msk (0x1UL << RCC_IOPENR_IOPHEN_Pos) /*!< 0x00000080 */ -#define RCC_IOPENR_IOPHEN RCC_IOPENR_IOPHEN_Msk /*!< GPIO port H clock enable */ - -/* Reference defines */ -#define RCC_IOPENR_GPIOAEN RCC_IOPENR_IOPAEN /*!< GPIO port A clock enable */ -#define RCC_IOPENR_GPIOBEN RCC_IOPENR_IOPBEN /*!< GPIO port B clock enable */ -#define RCC_IOPENR_GPIOCEN RCC_IOPENR_IOPCEN /*!< GPIO port C clock enable */ -#define RCC_IOPENR_GPIODEN RCC_IOPENR_IOPDEN /*!< GPIO port D clock enable */ -#define RCC_IOPENR_GPIOHEN RCC_IOPENR_IOPHEN /*!< GPIO port H clock enable */ - -/***************** Bit definition for RCC_AHBENR register ******************/ -#define RCC_AHBENR_DMAEN_Pos (0U) -#define RCC_AHBENR_DMAEN_Msk (0x1UL << RCC_AHBENR_DMAEN_Pos) /*!< 0x00000001 */ -#define RCC_AHBENR_DMAEN RCC_AHBENR_DMAEN_Msk /*!< DMA1 clock enable */ -#define RCC_AHBENR_MIFEN_Pos (8U) -#define RCC_AHBENR_MIFEN_Msk (0x1UL << RCC_AHBENR_MIFEN_Pos) /*!< 0x00000100 */ -#define RCC_AHBENR_MIFEN RCC_AHBENR_MIFEN_Msk /*!< NVM interface clock enable bit */ -#define RCC_AHBENR_CRCEN_Pos (12U) -#define RCC_AHBENR_CRCEN_Msk (0x1UL << RCC_AHBENR_CRCEN_Pos) /*!< 0x00001000 */ -#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ -#define RCC_AHBENR_CRYPEN_Pos (24U) -#define RCC_AHBENR_CRYPEN_Msk (0x1UL << RCC_AHBENR_CRYPEN_Pos) /*!< 0x01000000 */ -#define RCC_AHBENR_CRYPEN RCC_AHBENR_CRYPEN_Msk /*!< Crypto clock enable*/ - -/* Reference defines */ -#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */ - -/***************** Bit definition for RCC_APB2ENR register ******************/ -#define RCC_APB2ENR_SYSCFGEN_Pos (0U) -#define RCC_APB2ENR_SYSCFGEN_Msk (0x1UL << RCC_APB2ENR_SYSCFGEN_Pos) /*!< 0x00000001 */ -#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGEN_Msk /*!< SYSCFG clock enable */ -#define RCC_APB2ENR_TIM21EN_Pos (2U) -#define RCC_APB2ENR_TIM21EN_Msk (0x1UL << RCC_APB2ENR_TIM21EN_Pos) /*!< 0x00000004 */ -#define RCC_APB2ENR_TIM21EN RCC_APB2ENR_TIM21EN_Msk /*!< TIM21 clock enable */ -#define RCC_APB2ENR_TIM22EN_Pos (5U) -#define RCC_APB2ENR_TIM22EN_Msk (0x1UL << RCC_APB2ENR_TIM22EN_Pos) /*!< 0x00000020 */ -#define RCC_APB2ENR_TIM22EN RCC_APB2ENR_TIM22EN_Msk /*!< TIM22 clock enable */ -#define RCC_APB2ENR_FWEN_Pos (7U) -#define RCC_APB2ENR_FWEN_Msk (0x1UL << RCC_APB2ENR_FWEN_Pos) /*!< 0x00000080 */ -#define RCC_APB2ENR_FWEN RCC_APB2ENR_FWEN_Msk /*!< MiFare Firewall clock enable */ -#define RCC_APB2ENR_ADCEN_Pos (9U) -#define RCC_APB2ENR_ADCEN_Msk (0x1UL << RCC_APB2ENR_ADCEN_Pos) /*!< 0x00000200 */ -#define RCC_APB2ENR_ADCEN RCC_APB2ENR_ADCEN_Msk /*!< ADC1 clock enable */ -#define RCC_APB2ENR_SPI1EN_Pos (12U) -#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ -#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI1 clock enable */ -#define RCC_APB2ENR_USART1EN_Pos (14U) -#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ -#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ -#define RCC_APB2ENR_DBGEN_Pos (22U) -#define RCC_APB2ENR_DBGEN_Msk (0x1UL << RCC_APB2ENR_DBGEN_Pos) /*!< 0x00400000 */ -#define RCC_APB2ENR_DBGEN RCC_APB2ENR_DBGEN_Msk /*!< DBGMCU clock enable */ - -/* Reference defines */ - -#define RCC_APB2ENR_MIFIEN RCC_APB2ENR_FWEN /*!< MiFare Firewall clock enable */ -#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */ -#define RCC_APB2ENR_DBGMCUEN RCC_APB2ENR_DBGEN /*!< DBGMCU clock enable */ - -/***************** Bit definition for RCC_APB1ENR register ******************/ -#define RCC_APB1ENR_TIM2EN_Pos (0U) -#define RCC_APB1ENR_TIM2EN_Msk (0x1UL << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ -#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enable */ -#define RCC_APB1ENR_TIM6EN_Pos (4U) -#define RCC_APB1ENR_TIM6EN_Msk (0x1UL << RCC_APB1ENR_TIM6EN_Pos) /*!< 0x00000010 */ -#define RCC_APB1ENR_TIM6EN RCC_APB1ENR_TIM6EN_Msk /*!< Timer 6 clock enable */ -#define RCC_APB1ENR_WWDGEN_Pos (11U) -#define RCC_APB1ENR_WWDGEN_Msk (0x1UL << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ -#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ -#define RCC_APB1ENR_SPI2EN_Pos (14U) -#define RCC_APB1ENR_SPI2EN_Msk (0x1UL << RCC_APB1ENR_SPI2EN_Pos) /*!< 0x00004000 */ -#define RCC_APB1ENR_SPI2EN RCC_APB1ENR_SPI2EN_Msk /*!< SPI2 clock enable */ -#define RCC_APB1ENR_USART2EN_Pos (17U) -#define RCC_APB1ENR_USART2EN_Msk (0x1UL << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ -#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART2 clock enable */ -#define RCC_APB1ENR_LPUART1EN_Pos (18U) -#define RCC_APB1ENR_LPUART1EN_Msk (0x1UL << RCC_APB1ENR_LPUART1EN_Pos) /*!< 0x00040000 */ -#define RCC_APB1ENR_LPUART1EN RCC_APB1ENR_LPUART1EN_Msk /*!< LPUART1 clock enable */ -#define RCC_APB1ENR_I2C1EN_Pos (21U) -#define RCC_APB1ENR_I2C1EN_Msk (0x1UL << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ -#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C1 clock enable */ -#define RCC_APB1ENR_I2C2EN_Pos (22U) -#define RCC_APB1ENR_I2C2EN_Msk (0x1UL << RCC_APB1ENR_I2C2EN_Pos) /*!< 0x00400000 */ -#define RCC_APB1ENR_I2C2EN RCC_APB1ENR_I2C2EN_Msk /*!< I2C2 clock enable */ -#define RCC_APB1ENR_PWREN_Pos (28U) -#define RCC_APB1ENR_PWREN_Msk (0x1UL << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ -#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< PWR clock enable */ -#define RCC_APB1ENR_LPTIM1EN_Pos (31U) -#define RCC_APB1ENR_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR_LPTIM1EN_Pos) /*!< 0x80000000 */ -#define RCC_APB1ENR_LPTIM1EN RCC_APB1ENR_LPTIM1EN_Msk /*!< LPTIM1 clock enable */ - -/****************** Bit definition for RCC_IOPSMENR register ****************/ -#define RCC_IOPSMENR_IOPASMEN_Pos (0U) -#define RCC_IOPSMENR_IOPASMEN_Msk (0x1UL << RCC_IOPSMENR_IOPASMEN_Pos) /*!< 0x00000001 */ -#define RCC_IOPSMENR_IOPASMEN RCC_IOPSMENR_IOPASMEN_Msk /*!< GPIO port A clock enabled in sleep mode */ -#define RCC_IOPSMENR_IOPBSMEN_Pos (1U) -#define RCC_IOPSMENR_IOPBSMEN_Msk (0x1UL << RCC_IOPSMENR_IOPBSMEN_Pos) /*!< 0x00000002 */ -#define RCC_IOPSMENR_IOPBSMEN RCC_IOPSMENR_IOPBSMEN_Msk /*!< GPIO port B clock enabled in sleep mode */ -#define RCC_IOPSMENR_IOPCSMEN_Pos (2U) -#define RCC_IOPSMENR_IOPCSMEN_Msk (0x1UL << RCC_IOPSMENR_IOPCSMEN_Pos) /*!< 0x00000004 */ -#define RCC_IOPSMENR_IOPCSMEN RCC_IOPSMENR_IOPCSMEN_Msk /*!< GPIO port C clock enabled in sleep mode */ -#define RCC_IOPSMENR_IOPDSMEN_Pos (3U) -#define RCC_IOPSMENR_IOPDSMEN_Msk (0x1UL << RCC_IOPSMENR_IOPDSMEN_Pos) /*!< 0x00000008 */ -#define RCC_IOPSMENR_IOPDSMEN RCC_IOPSMENR_IOPDSMEN_Msk /*!< GPIO port D clock enabled in sleep mode */ -#define RCC_IOPSMENR_IOPHSMEN_Pos (7U) -#define RCC_IOPSMENR_IOPHSMEN_Msk (0x1UL << RCC_IOPSMENR_IOPHSMEN_Pos) /*!< 0x00000080 */ -#define RCC_IOPSMENR_IOPHSMEN RCC_IOPSMENR_IOPHSMEN_Msk /*!< GPIO port H clock enabled in sleep mode */ - -/* Reference defines */ -#define RCC_IOPSMENR_GPIOASMEN RCC_IOPSMENR_IOPASMEN /*!< GPIO port A clock enabled in sleep mode */ -#define RCC_IOPSMENR_GPIOBSMEN RCC_IOPSMENR_IOPBSMEN /*!< GPIO port B clock enabled in sleep mode */ -#define RCC_IOPSMENR_GPIOCSMEN RCC_IOPSMENR_IOPCSMEN /*!< GPIO port C clock enabled in sleep mode */ -#define RCC_IOPSMENR_GPIODSMEN RCC_IOPSMENR_IOPDSMEN /*!< GPIO port D clock enabled in sleep mode */ -#define RCC_IOPSMENR_GPIOHSMEN RCC_IOPSMENR_IOPHSMEN /*!< GPIO port H clock enabled in sleep mode */ - -/***************** Bit definition for RCC_AHBSMENR register ******************/ -#define RCC_AHBSMENR_DMASMEN_Pos (0U) -#define RCC_AHBSMENR_DMASMEN_Msk (0x1UL << RCC_AHBSMENR_DMASMEN_Pos) /*!< 0x00000001 */ -#define RCC_AHBSMENR_DMASMEN RCC_AHBSMENR_DMASMEN_Msk /*!< DMA1 clock enabled in sleep mode */ -#define RCC_AHBSMENR_MIFSMEN_Pos (8U) -#define RCC_AHBSMENR_MIFSMEN_Msk (0x1UL << RCC_AHBSMENR_MIFSMEN_Pos) /*!< 0x00000100 */ -#define RCC_AHBSMENR_MIFSMEN RCC_AHBSMENR_MIFSMEN_Msk /*!< NVM interface clock enable during sleep mode */ -#define RCC_AHBSMENR_SRAMSMEN_Pos (9U) -#define RCC_AHBSMENR_SRAMSMEN_Msk (0x1UL << RCC_AHBSMENR_SRAMSMEN_Pos) /*!< 0x00000200 */ -#define RCC_AHBSMENR_SRAMSMEN RCC_AHBSMENR_SRAMSMEN_Msk /*!< SRAM clock enabled in sleep mode */ -#define RCC_AHBSMENR_CRCSMEN_Pos (12U) -#define RCC_AHBSMENR_CRCSMEN_Msk (0x1UL << RCC_AHBSMENR_CRCSMEN_Pos) /*!< 0x00001000 */ -#define RCC_AHBSMENR_CRCSMEN RCC_AHBSMENR_CRCSMEN_Msk /*!< CRC clock enabled in sleep mode */ -#define RCC_AHBSMENR_CRYPSMEN_Pos (24U) -#define RCC_AHBSMENR_CRYPSMEN_Msk (0x1UL << RCC_AHBSMENR_CRYPSMEN_Pos) /*!< 0x01000000 */ -#define RCC_AHBSMENR_CRYPSMEN RCC_AHBSMENR_CRYPSMEN_Msk /*!< Crypto clock enabled in sleep mode */ - -/* Reference defines */ -#define RCC_AHBSMENR_DMA1SMEN RCC_AHBSMENR_DMASMEN /*!< DMA1 clock enabled in sleep mode */ - -/***************** Bit definition for RCC_APB2SMENR register ******************/ -#define RCC_APB2SMENR_SYSCFGSMEN_Pos (0U) -#define RCC_APB2SMENR_SYSCFGSMEN_Msk (0x1UL << RCC_APB2SMENR_SYSCFGSMEN_Pos) /*!< 0x00000001 */ -#define RCC_APB2SMENR_SYSCFGSMEN RCC_APB2SMENR_SYSCFGSMEN_Msk /*!< SYSCFG clock enabled in sleep mode */ -#define RCC_APB2SMENR_TIM21SMEN_Pos (2U) -#define RCC_APB2SMENR_TIM21SMEN_Msk (0x1UL << RCC_APB2SMENR_TIM21SMEN_Pos) /*!< 0x00000004 */ -#define RCC_APB2SMENR_TIM21SMEN RCC_APB2SMENR_TIM21SMEN_Msk /*!< TIM21 clock enabled in sleep mode */ -#define RCC_APB2SMENR_TIM22SMEN_Pos (5U) -#define RCC_APB2SMENR_TIM22SMEN_Msk (0x1UL << RCC_APB2SMENR_TIM22SMEN_Pos) /*!< 0x00000020 */ -#define RCC_APB2SMENR_TIM22SMEN RCC_APB2SMENR_TIM22SMEN_Msk /*!< TIM22 clock enabled in sleep mode */ -#define RCC_APB2SMENR_ADCSMEN_Pos (9U) -#define RCC_APB2SMENR_ADCSMEN_Msk (0x1UL << RCC_APB2SMENR_ADCSMEN_Pos) /*!< 0x00000200 */ -#define RCC_APB2SMENR_ADCSMEN RCC_APB2SMENR_ADCSMEN_Msk /*!< ADC1 clock enabled in sleep mode */ -#define RCC_APB2SMENR_SPI1SMEN_Pos (12U) -#define RCC_APB2SMENR_SPI1SMEN_Msk (0x1UL << RCC_APB2SMENR_SPI1SMEN_Pos) /*!< 0x00001000 */ -#define RCC_APB2SMENR_SPI1SMEN RCC_APB2SMENR_SPI1SMEN_Msk /*!< SPI1 clock enabled in sleep mode */ -#define RCC_APB2SMENR_USART1SMEN_Pos (14U) -#define RCC_APB2SMENR_USART1SMEN_Msk (0x1UL << RCC_APB2SMENR_USART1SMEN_Pos) /*!< 0x00004000 */ -#define RCC_APB2SMENR_USART1SMEN RCC_APB2SMENR_USART1SMEN_Msk /*!< USART1 clock enabled in sleep mode */ -#define RCC_APB2SMENR_DBGSMEN_Pos (22U) -#define RCC_APB2SMENR_DBGSMEN_Msk (0x1UL << RCC_APB2SMENR_DBGSMEN_Pos) /*!< 0x00400000 */ -#define RCC_APB2SMENR_DBGSMEN RCC_APB2SMENR_DBGSMEN_Msk /*!< DBGMCU clock enabled in sleep mode */ - -/* Reference defines */ -#define RCC_APB2SMENR_ADC1SMEN RCC_APB2SMENR_ADCSMEN /*!< ADC1 clock enabled in sleep mode */ -#define RCC_APB2SMENR_DBGMCUSMEN RCC_APB2SMENR_DBGSMEN /*!< DBGMCU clock enabled in sleep mode */ - -/***************** Bit definition for RCC_APB1SMENR register ******************/ -#define RCC_APB1SMENR_TIM2SMEN_Pos (0U) -#define RCC_APB1SMENR_TIM2SMEN_Msk (0x1UL << RCC_APB1SMENR_TIM2SMEN_Pos) /*!< 0x00000001 */ -#define RCC_APB1SMENR_TIM2SMEN RCC_APB1SMENR_TIM2SMEN_Msk /*!< Timer 2 clock enabled in sleep mode */ -#define RCC_APB1SMENR_TIM6SMEN_Pos (4U) -#define RCC_APB1SMENR_TIM6SMEN_Msk (0x1UL << RCC_APB1SMENR_TIM6SMEN_Pos) /*!< 0x00000010 */ -#define RCC_APB1SMENR_TIM6SMEN RCC_APB1SMENR_TIM6SMEN_Msk /*!< Timer 6 clock enabled in sleep mode */ -#define RCC_APB1SMENR_WWDGSMEN_Pos (11U) -#define RCC_APB1SMENR_WWDGSMEN_Msk (0x1UL << RCC_APB1SMENR_WWDGSMEN_Pos) /*!< 0x00000800 */ -#define RCC_APB1SMENR_WWDGSMEN RCC_APB1SMENR_WWDGSMEN_Msk /*!< Window Watchdog clock enabled in sleep mode */ -#define RCC_APB1SMENR_SPI2SMEN_Pos (14U) -#define RCC_APB1SMENR_SPI2SMEN_Msk (0x1UL << RCC_APB1SMENR_SPI2SMEN_Pos) /*!< 0x00004000 */ -#define RCC_APB1SMENR_SPI2SMEN RCC_APB1SMENR_SPI2SMEN_Msk /*!< SPI2 clock enabled in sleep mode */ -#define RCC_APB1SMENR_USART2SMEN_Pos (17U) -#define RCC_APB1SMENR_USART2SMEN_Msk (0x1UL << RCC_APB1SMENR_USART2SMEN_Pos) /*!< 0x00020000 */ -#define RCC_APB1SMENR_USART2SMEN RCC_APB1SMENR_USART2SMEN_Msk /*!< USART2 clock enabled in sleep mode */ -#define RCC_APB1SMENR_LPUART1SMEN_Pos (18U) -#define RCC_APB1SMENR_LPUART1SMEN_Msk (0x1UL << RCC_APB1SMENR_LPUART1SMEN_Pos) /*!< 0x00040000 */ -#define RCC_APB1SMENR_LPUART1SMEN RCC_APB1SMENR_LPUART1SMEN_Msk /*!< LPUART1 clock enabled in sleep mode */ -#define RCC_APB1SMENR_I2C1SMEN_Pos (21U) -#define RCC_APB1SMENR_I2C1SMEN_Msk (0x1UL << RCC_APB1SMENR_I2C1SMEN_Pos) /*!< 0x00200000 */ -#define RCC_APB1SMENR_I2C1SMEN RCC_APB1SMENR_I2C1SMEN_Msk /*!< I2C1 clock enabled in sleep mode */ -#define RCC_APB1SMENR_I2C2SMEN_Pos (22U) -#define RCC_APB1SMENR_I2C2SMEN_Msk (0x1UL << RCC_APB1SMENR_I2C2SMEN_Pos) /*!< 0x00400000 */ -#define RCC_APB1SMENR_I2C2SMEN RCC_APB1SMENR_I2C2SMEN_Msk /*!< I2C2 clock enabled in sleep mode */ -#define RCC_APB1SMENR_PWRSMEN_Pos (28U) -#define RCC_APB1SMENR_PWRSMEN_Msk (0x1UL << RCC_APB1SMENR_PWRSMEN_Pos) /*!< 0x10000000 */ -#define RCC_APB1SMENR_PWRSMEN RCC_APB1SMENR_PWRSMEN_Msk /*!< PWR clock enabled in sleep mode */ -#define RCC_APB1SMENR_LPTIM1SMEN_Pos (31U) -#define RCC_APB1SMENR_LPTIM1SMEN_Msk (0x1UL << RCC_APB1SMENR_LPTIM1SMEN_Pos) /*!< 0x80000000 */ -#define RCC_APB1SMENR_LPTIM1SMEN RCC_APB1SMENR_LPTIM1SMEN_Msk /*!< LPTIM1 clock enabled in sleep mode */ - -/******************* Bit definition for RCC_CCIPR register *******************/ -/*!< USART1 Clock source selection */ -#define RCC_CCIPR_USART1SEL_Pos (0U) -#define RCC_CCIPR_USART1SEL_Msk (0x3UL << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000003 */ -#define RCC_CCIPR_USART1SEL RCC_CCIPR_USART1SEL_Msk /*!< USART1SEL[1:0] bits */ -#define RCC_CCIPR_USART1SEL_0 (0x1UL << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000001 */ -#define RCC_CCIPR_USART1SEL_1 (0x2UL << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000002 */ - -/*!< USART2 Clock source selection */ -#define RCC_CCIPR_USART2SEL_Pos (2U) -#define RCC_CCIPR_USART2SEL_Msk (0x3UL << RCC_CCIPR_USART2SEL_Pos) /*!< 0x0000000C */ -#define RCC_CCIPR_USART2SEL RCC_CCIPR_USART2SEL_Msk /*!< USART2SEL[1:0] bits */ -#define RCC_CCIPR_USART2SEL_0 (0x1UL << RCC_CCIPR_USART2SEL_Pos) /*!< 0x00000004 */ -#define RCC_CCIPR_USART2SEL_1 (0x2UL << RCC_CCIPR_USART2SEL_Pos) /*!< 0x00000008 */ - -/*!< LPUART1 Clock source selection */ -#define RCC_CCIPR_LPUART1SEL_Pos (10U) -#define RCC_CCIPR_LPUART1SEL_Msk (0x3UL << RCC_CCIPR_LPUART1SEL_Pos) /*!< 0x00000C00 */ -#define RCC_CCIPR_LPUART1SEL RCC_CCIPR_LPUART1SEL_Msk /*!< LPUART1SEL[1:0] bits */ -#define RCC_CCIPR_LPUART1SEL_0 (0x1UL << RCC_CCIPR_LPUART1SEL_Pos) /*!< 0x0000400 */ -#define RCC_CCIPR_LPUART1SEL_1 (0x2UL << RCC_CCIPR_LPUART1SEL_Pos) /*!< 0x0000800 */ - -/*!< I2C1 Clock source selection */ -#define RCC_CCIPR_I2C1SEL_Pos (12U) -#define RCC_CCIPR_I2C1SEL_Msk (0x3UL << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00003000 */ -#define RCC_CCIPR_I2C1SEL RCC_CCIPR_I2C1SEL_Msk /*!< I2C1SEL [1:0] bits */ -#define RCC_CCIPR_I2C1SEL_0 (0x1UL << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00001000 */ -#define RCC_CCIPR_I2C1SEL_1 (0x2UL << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00002000 */ - - -/*!< LPTIM1 Clock source selection */ -#define RCC_CCIPR_LPTIM1SEL_Pos (18U) -#define RCC_CCIPR_LPTIM1SEL_Msk (0x3UL << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x000C0000 */ -#define RCC_CCIPR_LPTIM1SEL RCC_CCIPR_LPTIM1SEL_Msk /*!< LPTIM1SEL [1:0] bits */ -#define RCC_CCIPR_LPTIM1SEL_0 (0x1UL << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x00040000 */ -#define RCC_CCIPR_LPTIM1SEL_1 (0x2UL << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x00080000 */ - -/******************* Bit definition for RCC_CSR register *******************/ -#define RCC_CSR_LSION_Pos (0U) -#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ -#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ -#define RCC_CSR_LSIRDY_Pos (1U) -#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ -#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ - -#define RCC_CSR_LSEON_Pos (8U) -#define RCC_CSR_LSEON_Msk (0x1UL << RCC_CSR_LSEON_Pos) /*!< 0x00000100 */ -#define RCC_CSR_LSEON RCC_CSR_LSEON_Msk /*!< External Low Speed oscillator enable */ -#define RCC_CSR_LSERDY_Pos (9U) -#define RCC_CSR_LSERDY_Msk (0x1UL << RCC_CSR_LSERDY_Pos) /*!< 0x00000200 */ -#define RCC_CSR_LSERDY RCC_CSR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ -#define RCC_CSR_LSEBYP_Pos (10U) -#define RCC_CSR_LSEBYP_Msk (0x1UL << RCC_CSR_LSEBYP_Pos) /*!< 0x00000400 */ -#define RCC_CSR_LSEBYP RCC_CSR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ - -#define RCC_CSR_LSEDRV_Pos (11U) -#define RCC_CSR_LSEDRV_Msk (0x3UL << RCC_CSR_LSEDRV_Pos) /*!< 0x00001800 */ -#define RCC_CSR_LSEDRV RCC_CSR_LSEDRV_Msk /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */ -#define RCC_CSR_LSEDRV_0 (0x1UL << RCC_CSR_LSEDRV_Pos) /*!< 0x00000800 */ -#define RCC_CSR_LSEDRV_1 (0x2UL << RCC_CSR_LSEDRV_Pos) /*!< 0x00001000 */ - -#define RCC_CSR_LSECSSON_Pos (13U) -#define RCC_CSR_LSECSSON_Msk (0x1UL << RCC_CSR_LSECSSON_Pos) /*!< 0x00002000 */ -#define RCC_CSR_LSECSSON RCC_CSR_LSECSSON_Msk /*!< External Low Speed oscillator CSS Enable */ -#define RCC_CSR_LSECSSD_Pos (14U) -#define RCC_CSR_LSECSSD_Msk (0x1UL << RCC_CSR_LSECSSD_Pos) /*!< 0x00004000 */ -#define RCC_CSR_LSECSSD RCC_CSR_LSECSSD_Msk /*!< External Low Speed oscillator CSS Detected */ - -/*!< RTC congiguration */ -#define RCC_CSR_RTCSEL_Pos (16U) -#define RCC_CSR_RTCSEL_Msk (0x3UL << RCC_CSR_RTCSEL_Pos) /*!< 0x00030000 */ -#define RCC_CSR_RTCSEL RCC_CSR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ -#define RCC_CSR_RTCSEL_0 (0x1UL << RCC_CSR_RTCSEL_Pos) /*!< 0x00010000 */ -#define RCC_CSR_RTCSEL_1 (0x2UL << RCC_CSR_RTCSEL_Pos) /*!< 0x00020000 */ - -#define RCC_CSR_RTCSEL_NOCLOCK (0x00000000U) /*!< No clock */ -#define RCC_CSR_RTCSEL_LSE_Pos (16U) -#define RCC_CSR_RTCSEL_LSE_Msk (0x1UL << RCC_CSR_RTCSEL_LSE_Pos) /*!< 0x00010000 */ -#define RCC_CSR_RTCSEL_LSE RCC_CSR_RTCSEL_LSE_Msk /*!< LSE oscillator clock used as RTC clock */ -#define RCC_CSR_RTCSEL_LSI_Pos (17U) -#define RCC_CSR_RTCSEL_LSI_Msk (0x1UL << RCC_CSR_RTCSEL_LSI_Pos) /*!< 0x00020000 */ -#define RCC_CSR_RTCSEL_LSI RCC_CSR_RTCSEL_LSI_Msk /*!< LSI oscillator clock used as RTC clock */ -#define RCC_CSR_RTCSEL_HSE_Pos (16U) -#define RCC_CSR_RTCSEL_HSE_Msk (0x3UL << RCC_CSR_RTCSEL_HSE_Pos) /*!< 0x00030000 */ -#define RCC_CSR_RTCSEL_HSE RCC_CSR_RTCSEL_HSE_Msk /*!< HSE oscillator clock used as RTC clock */ - -#define RCC_CSR_RTCEN_Pos (18U) -#define RCC_CSR_RTCEN_Msk (0x1UL << RCC_CSR_RTCEN_Pos) /*!< 0x00040000 */ -#define RCC_CSR_RTCEN RCC_CSR_RTCEN_Msk /*!< RTC clock enable */ -#define RCC_CSR_RTCRST_Pos (19U) -#define RCC_CSR_RTCRST_Msk (0x1UL << RCC_CSR_RTCRST_Pos) /*!< 0x00080000 */ -#define RCC_CSR_RTCRST RCC_CSR_RTCRST_Msk /*!< RTC software reset */ - -#define RCC_CSR_RMVF_Pos (23U) -#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x00800000 */ -#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ -#define RCC_CSR_FWRSTF_Pos (24U) -#define RCC_CSR_FWRSTF_Msk (0x1UL << RCC_CSR_FWRSTF_Pos) /*!< 0x01000000 */ -#define RCC_CSR_FWRSTF RCC_CSR_FWRSTF_Msk /*!< Mifare Firewall reset flag */ -#define RCC_CSR_OBLRSTF_Pos (25U) -#define RCC_CSR_OBLRSTF_Msk (0x1UL << RCC_CSR_OBLRSTF_Pos) /*!< 0x02000000 */ -#define RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF_Msk /*!< OBL reset flag */ -#define RCC_CSR_PINRSTF_Pos (26U) -#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ -#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ -#define RCC_CSR_PORRSTF_Pos (27U) -#define RCC_CSR_PORRSTF_Msk (0x1UL << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ -#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ -#define RCC_CSR_SFTRSTF_Pos (28U) -#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ -#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ -#define RCC_CSR_IWDGRSTF_Pos (29U) -#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ -#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ -#define RCC_CSR_WWDGRSTF_Pos (30U) -#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ -#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ -#define RCC_CSR_LPWRRSTF_Pos (31U) -#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ -#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ - -/* Reference defines */ -#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */ - - -/******************************************************************************/ -/* */ -/* Real-Time Clock (RTC) */ -/* */ -/******************************************************************************/ -/* -* @brief Specific device feature definitions -*/ -#define RTC_TAMPER1_SUPPORT -#define RTC_TAMPER2_SUPPORT -#define RTC_WAKEUP_SUPPORT -#define RTC_BACKUP_SUPPORT - -/******************** Bits definition for RTC_TR register *******************/ -#define RTC_TR_PM_Pos (22U) -#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ -#define RTC_TR_PM RTC_TR_PM_Msk /*!< */ -#define RTC_TR_HT_Pos (20U) -#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ -#define RTC_TR_HT RTC_TR_HT_Msk /*!< */ -#define RTC_TR_HT_0 (0x1UL << RTC_TR_HT_Pos) /*!< 0x00100000 */ -#define RTC_TR_HT_1 (0x2UL << RTC_TR_HT_Pos) /*!< 0x00200000 */ -#define RTC_TR_HU_Pos (16U) -#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ -#define RTC_TR_HU RTC_TR_HU_Msk /*!< */ -#define RTC_TR_HU_0 (0x1UL << RTC_TR_HU_Pos) /*!< 0x00010000 */ -#define RTC_TR_HU_1 (0x2UL << RTC_TR_HU_Pos) /*!< 0x00020000 */ -#define RTC_TR_HU_2 (0x4UL << RTC_TR_HU_Pos) /*!< 0x00040000 */ -#define RTC_TR_HU_3 (0x8UL << RTC_TR_HU_Pos) /*!< 0x00080000 */ -#define RTC_TR_MNT_Pos (12U) -#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ -#define RTC_TR_MNT RTC_TR_MNT_Msk /*!< */ -#define RTC_TR_MNT_0 (0x1UL << RTC_TR_MNT_Pos) /*!< 0x00001000 */ -#define RTC_TR_MNT_1 (0x2UL << RTC_TR_MNT_Pos) /*!< 0x00002000 */ -#define RTC_TR_MNT_2 (0x4UL << RTC_TR_MNT_Pos) /*!< 0x00004000 */ -#define RTC_TR_MNU_Pos (8U) -#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ -#define RTC_TR_MNU RTC_TR_MNU_Msk /*!< */ -#define RTC_TR_MNU_0 (0x1UL << RTC_TR_MNU_Pos) /*!< 0x00000100 */ -#define RTC_TR_MNU_1 (0x2UL << RTC_TR_MNU_Pos) /*!< 0x00000200 */ -#define RTC_TR_MNU_2 (0x4UL << RTC_TR_MNU_Pos) /*!< 0x00000400 */ -#define RTC_TR_MNU_3 (0x8UL << RTC_TR_MNU_Pos) /*!< 0x00000800 */ -#define RTC_TR_ST_Pos (4U) -#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ -#define RTC_TR_ST RTC_TR_ST_Msk /*!< */ -#define RTC_TR_ST_0 (0x1UL << RTC_TR_ST_Pos) /*!< 0x00000010 */ -#define RTC_TR_ST_1 (0x2UL << RTC_TR_ST_Pos) /*!< 0x00000020 */ -#define RTC_TR_ST_2 (0x4UL << RTC_TR_ST_Pos) /*!< 0x00000040 */ -#define RTC_TR_SU_Pos (0U) -#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ -#define RTC_TR_SU RTC_TR_SU_Msk /*!< */ -#define RTC_TR_SU_0 (0x1UL << RTC_TR_SU_Pos) /*!< 0x00000001 */ -#define RTC_TR_SU_1 (0x2UL << RTC_TR_SU_Pos) /*!< 0x00000002 */ -#define RTC_TR_SU_2 (0x4UL << RTC_TR_SU_Pos) /*!< 0x00000004 */ -#define RTC_TR_SU_3 (0x8UL << RTC_TR_SU_Pos) /*!< 0x00000008 */ - -/******************** Bits definition for RTC_DR register *******************/ -#define RTC_DR_YT_Pos (20U) -#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ -#define RTC_DR_YT RTC_DR_YT_Msk /*!< */ -#define RTC_DR_YT_0 (0x1UL << RTC_DR_YT_Pos) /*!< 0x00100000 */ -#define RTC_DR_YT_1 (0x2UL << RTC_DR_YT_Pos) /*!< 0x00200000 */ -#define RTC_DR_YT_2 (0x4UL << RTC_DR_YT_Pos) /*!< 0x00400000 */ -#define RTC_DR_YT_3 (0x8UL << RTC_DR_YT_Pos) /*!< 0x00800000 */ -#define RTC_DR_YU_Pos (16U) -#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ -#define RTC_DR_YU RTC_DR_YU_Msk /*!< */ -#define RTC_DR_YU_0 (0x1UL << RTC_DR_YU_Pos) /*!< 0x00010000 */ -#define RTC_DR_YU_1 (0x2UL << RTC_DR_YU_Pos) /*!< 0x00020000 */ -#define RTC_DR_YU_2 (0x4UL << RTC_DR_YU_Pos) /*!< 0x00040000 */ -#define RTC_DR_YU_3 (0x8UL << RTC_DR_YU_Pos) /*!< 0x00080000 */ -#define RTC_DR_WDU_Pos (13U) -#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ -#define RTC_DR_WDU RTC_DR_WDU_Msk /*!< */ -#define RTC_DR_WDU_0 (0x1UL << RTC_DR_WDU_Pos) /*!< 0x00002000 */ -#define RTC_DR_WDU_1 (0x2UL << RTC_DR_WDU_Pos) /*!< 0x00004000 */ -#define RTC_DR_WDU_2 (0x4UL << RTC_DR_WDU_Pos) /*!< 0x00008000 */ -#define RTC_DR_MT_Pos (12U) -#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ -#define RTC_DR_MT RTC_DR_MT_Msk /*!< */ -#define RTC_DR_MU_Pos (8U) -#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ -#define RTC_DR_MU RTC_DR_MU_Msk /*!< */ -#define RTC_DR_MU_0 (0x1UL << RTC_DR_MU_Pos) /*!< 0x00000100 */ -#define RTC_DR_MU_1 (0x2UL << RTC_DR_MU_Pos) /*!< 0x00000200 */ -#define RTC_DR_MU_2 (0x4UL << RTC_DR_MU_Pos) /*!< 0x00000400 */ -#define RTC_DR_MU_3 (0x8UL << RTC_DR_MU_Pos) /*!< 0x00000800 */ -#define RTC_DR_DT_Pos (4U) -#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ -#define RTC_DR_DT RTC_DR_DT_Msk /*!< */ -#define RTC_DR_DT_0 (0x1UL << RTC_DR_DT_Pos) /*!< 0x00000010 */ -#define RTC_DR_DT_1 (0x2UL << RTC_DR_DT_Pos) /*!< 0x00000020 */ -#define RTC_DR_DU_Pos (0U) -#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ -#define RTC_DR_DU RTC_DR_DU_Msk /*!< */ -#define RTC_DR_DU_0 (0x1UL << RTC_DR_DU_Pos) /*!< 0x00000001 */ -#define RTC_DR_DU_1 (0x2UL << RTC_DR_DU_Pos) /*!< 0x00000002 */ -#define RTC_DR_DU_2 (0x4UL << RTC_DR_DU_Pos) /*!< 0x00000004 */ -#define RTC_DR_DU_3 (0x8UL << RTC_DR_DU_Pos) /*!< 0x00000008 */ - -/******************** Bits definition for RTC_CR register *******************/ -#define RTC_CR_COE_Pos (23U) -#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ -#define RTC_CR_COE RTC_CR_COE_Msk /*!< */ -#define RTC_CR_OSEL_Pos (21U) -#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ -#define RTC_CR_OSEL RTC_CR_OSEL_Msk /*!< */ -#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ -#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ -#define RTC_CR_POL_Pos (20U) -#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ -#define RTC_CR_POL RTC_CR_POL_Msk /*!< */ -#define RTC_CR_COSEL_Pos (19U) -#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ -#define RTC_CR_COSEL RTC_CR_COSEL_Msk /*!< */ -#define RTC_CR_BKP_Pos (18U) -#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ -#define RTC_CR_BKP RTC_CR_BKP_Msk /*!< */ -#define RTC_CR_SUB1H_Pos (17U) -#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ -#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk /*!< */ -#define RTC_CR_ADD1H_Pos (16U) -#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ -#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk /*!< */ -#define RTC_CR_TSIE_Pos (15U) -#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ -#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< */ -#define RTC_CR_WUTIE_Pos (14U) -#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ -#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< */ -#define RTC_CR_ALRBIE_Pos (13U) -#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ -#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk /*!< */ -#define RTC_CR_ALRAIE_Pos (12U) -#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ -#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk /*!< */ -#define RTC_CR_TSE_Pos (11U) -#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ -#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< */ -#define RTC_CR_WUTE_Pos (10U) -#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ -#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< */ -#define RTC_CR_ALRBE_Pos (9U) -#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ -#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk /*!< */ -#define RTC_CR_ALRAE_Pos (8U) -#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ -#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk /*!< */ -#define RTC_CR_FMT_Pos (6U) -#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ -#define RTC_CR_FMT RTC_CR_FMT_Msk /*!< */ -#define RTC_CR_BYPSHAD_Pos (5U) -#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ -#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk /*!< */ -#define RTC_CR_REFCKON_Pos (4U) -#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ -#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk /*!< */ -#define RTC_CR_TSEDGE_Pos (3U) -#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ -#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< */ -#define RTC_CR_WUCKSEL_Pos (0U) -#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ -#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< */ -#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ -#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ -#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ - -/******************** Bits definition for RTC_ISR register ******************/ -#define RTC_ISR_RECALPF_Pos (16U) -#define RTC_ISR_RECALPF_Msk (0x1UL << RTC_ISR_RECALPF_Pos) /*!< 0x00010000 */ -#define RTC_ISR_RECALPF RTC_ISR_RECALPF_Msk /*!< */ -#define RTC_ISR_TAMP2F_Pos (14U) -#define RTC_ISR_TAMP2F_Msk (0x1UL << RTC_ISR_TAMP2F_Pos) /*!< 0x00004000 */ -#define RTC_ISR_TAMP2F RTC_ISR_TAMP2F_Msk /*!< */ -#define RTC_ISR_TAMP1F_Pos (13U) -#define RTC_ISR_TAMP1F_Msk (0x1UL << RTC_ISR_TAMP1F_Pos) /*!< 0x00002000 */ -#define RTC_ISR_TAMP1F RTC_ISR_TAMP1F_Msk /*!< */ -#define RTC_ISR_TSOVF_Pos (12U) -#define RTC_ISR_TSOVF_Msk (0x1UL << RTC_ISR_TSOVF_Pos) /*!< 0x00001000 */ -#define RTC_ISR_TSOVF RTC_ISR_TSOVF_Msk /*!< */ -#define RTC_ISR_TSF_Pos (11U) -#define RTC_ISR_TSF_Msk (0x1UL << RTC_ISR_TSF_Pos) /*!< 0x00000800 */ -#define RTC_ISR_TSF RTC_ISR_TSF_Msk /*!< */ -#define RTC_ISR_WUTF_Pos (10U) -#define RTC_ISR_WUTF_Msk (0x1UL << RTC_ISR_WUTF_Pos) /*!< 0x00000400 */ -#define RTC_ISR_WUTF RTC_ISR_WUTF_Msk /*!< */ -#define RTC_ISR_ALRBF_Pos (9U) -#define RTC_ISR_ALRBF_Msk (0x1UL << RTC_ISR_ALRBF_Pos) /*!< 0x00000200 */ -#define RTC_ISR_ALRBF RTC_ISR_ALRBF_Msk /*!< */ -#define RTC_ISR_ALRAF_Pos (8U) -#define RTC_ISR_ALRAF_Msk (0x1UL << RTC_ISR_ALRAF_Pos) /*!< 0x00000100 */ -#define RTC_ISR_ALRAF RTC_ISR_ALRAF_Msk /*!< */ -#define RTC_ISR_INIT_Pos (7U) -#define RTC_ISR_INIT_Msk (0x1UL << RTC_ISR_INIT_Pos) /*!< 0x00000080 */ -#define RTC_ISR_INIT RTC_ISR_INIT_Msk /*!< */ -#define RTC_ISR_INITF_Pos (6U) -#define RTC_ISR_INITF_Msk (0x1UL << RTC_ISR_INITF_Pos) /*!< 0x00000040 */ -#define RTC_ISR_INITF RTC_ISR_INITF_Msk /*!< */ -#define RTC_ISR_RSF_Pos (5U) -#define RTC_ISR_RSF_Msk (0x1UL << RTC_ISR_RSF_Pos) /*!< 0x00000020 */ -#define RTC_ISR_RSF RTC_ISR_RSF_Msk /*!< */ -#define RTC_ISR_INITS_Pos (4U) -#define RTC_ISR_INITS_Msk (0x1UL << RTC_ISR_INITS_Pos) /*!< 0x00000010 */ -#define RTC_ISR_INITS RTC_ISR_INITS_Msk /*!< */ -#define RTC_ISR_SHPF_Pos (3U) -#define RTC_ISR_SHPF_Msk (0x1UL << RTC_ISR_SHPF_Pos) /*!< 0x00000008 */ -#define RTC_ISR_SHPF RTC_ISR_SHPF_Msk /*!< */ -#define RTC_ISR_WUTWF_Pos (2U) -#define RTC_ISR_WUTWF_Msk (0x1UL << RTC_ISR_WUTWF_Pos) /*!< 0x00000004 */ -#define RTC_ISR_WUTWF RTC_ISR_WUTWF_Msk /*!< */ -#define RTC_ISR_ALRBWF_Pos (1U) -#define RTC_ISR_ALRBWF_Msk (0x1UL << RTC_ISR_ALRBWF_Pos) /*!< 0x00000002 */ -#define RTC_ISR_ALRBWF RTC_ISR_ALRBWF_Msk /*!< */ -#define RTC_ISR_ALRAWF_Pos (0U) -#define RTC_ISR_ALRAWF_Msk (0x1UL << RTC_ISR_ALRAWF_Pos) /*!< 0x00000001 */ -#define RTC_ISR_ALRAWF RTC_ISR_ALRAWF_Msk /*!< */ - -/******************** Bits definition for RTC_PRER register *****************/ -#define RTC_PRER_PREDIV_A_Pos (16U) -#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ -#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk /*!< */ -#define RTC_PRER_PREDIV_S_Pos (0U) -#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ -#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk /*!< */ - -/******************** Bits definition for RTC_WUTR register *****************/ -#define RTC_WUTR_WUT_Pos (0U) -#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ -#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk - -/******************** Bits definition for RTC_ALRMAR register ***************/ -#define RTC_ALRMAR_MSK4_Pos (31U) -#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ -#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk /*!< */ -#define RTC_ALRMAR_WDSEL_Pos (30U) -#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ -#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk /*!< */ -#define RTC_ALRMAR_DT_Pos (28U) -#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ -#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk /*!< */ -#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ -#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ -#define RTC_ALRMAR_DU_Pos (24U) -#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ -#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk /*!< */ -#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ -#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ -#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ -#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ -#define RTC_ALRMAR_MSK3_Pos (23U) -#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ -#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk /*!< */ -#define RTC_ALRMAR_PM_Pos (22U) -#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ -#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk /*!< */ -#define RTC_ALRMAR_HT_Pos (20U) -#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ -#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk /*!< */ -#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ -#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ -#define RTC_ALRMAR_HU_Pos (16U) -#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ -#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk /*!< */ -#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ -#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ -#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ -#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ -#define RTC_ALRMAR_MSK2_Pos (15U) -#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ -#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk /*!< */ -#define RTC_ALRMAR_MNT_Pos (12U) -#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ -#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk /*!< */ -#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ -#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ -#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ -#define RTC_ALRMAR_MNU_Pos (8U) -#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ -#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk /*!< */ -#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ -#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ -#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ -#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ -#define RTC_ALRMAR_MSK1_Pos (7U) -#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ -#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk /*!< */ -#define RTC_ALRMAR_ST_Pos (4U) -#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ -#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk /*!< */ -#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ -#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ -#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ -#define RTC_ALRMAR_SU_Pos (0U) -#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ -#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk /*!< */ -#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ -#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ -#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ -#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ - -/******************** Bits definition for RTC_ALRMBR register ***************/ -#define RTC_ALRMBR_MSK4_Pos (31U) -#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ -#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk /*!< */ -#define RTC_ALRMBR_WDSEL_Pos (30U) -#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ -#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk /*!< */ -#define RTC_ALRMBR_DT_Pos (28U) -#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ -#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk /*!< */ -#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ -#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ -#define RTC_ALRMBR_DU_Pos (24U) -#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ -#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk /*!< */ -#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ -#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ -#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ -#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ -#define RTC_ALRMBR_MSK3_Pos (23U) -#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ -#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk /*!< */ -#define RTC_ALRMBR_PM_Pos (22U) -#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ -#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk /*!< */ -#define RTC_ALRMBR_HT_Pos (20U) -#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ -#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk /*!< */ -#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ -#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ -#define RTC_ALRMBR_HU_Pos (16U) -#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ -#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk /*!< */ -#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ -#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ -#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ -#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ -#define RTC_ALRMBR_MSK2_Pos (15U) -#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ -#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk /*!< */ -#define RTC_ALRMBR_MNT_Pos (12U) -#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ -#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk /*!< */ -#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ -#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ -#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ -#define RTC_ALRMBR_MNU_Pos (8U) -#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ -#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk /*!< */ -#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ -#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ -#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ -#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ -#define RTC_ALRMBR_MSK1_Pos (7U) -#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ -#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk /*!< */ -#define RTC_ALRMBR_ST_Pos (4U) -#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ -#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk /*!< */ -#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ -#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ -#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ -#define RTC_ALRMBR_SU_Pos (0U) -#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ -#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk /*!< */ -#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ -#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ -#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ -#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ - -/******************** Bits definition for RTC_WPR register ******************/ -#define RTC_WPR_KEY_Pos (0U) -#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ -#define RTC_WPR_KEY RTC_WPR_KEY_Msk /*!< */ - -/******************** Bits definition for RTC_SSR register ******************/ -#define RTC_SSR_SS_Pos (0U) -#define RTC_SSR_SS_Msk (0xFFFFUL << RTC_SSR_SS_Pos) /*!< 0x0000FFFF */ -#define RTC_SSR_SS RTC_SSR_SS_Msk /*!< */ - -/******************** Bits definition for RTC_SHIFTR register ***************/ -#define RTC_SHIFTR_SUBFS_Pos (0U) -#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ -#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk /*!< */ -#define RTC_SHIFTR_ADD1S_Pos (31U) -#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ -#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk /*!< */ - -/******************** Bits definition for RTC_TSTR register *****************/ -#define RTC_TSTR_PM_Pos (22U) -#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ -#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< */ -#define RTC_TSTR_HT_Pos (20U) -#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ -#define RTC_TSTR_HT RTC_TSTR_HT_Msk /*!< */ -#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ -#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ -#define RTC_TSTR_HU_Pos (16U) -#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ -#define RTC_TSTR_HU RTC_TSTR_HU_Msk /*!< */ -#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ -#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ -#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ -#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ -#define RTC_TSTR_MNT_Pos (12U) -#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ -#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk /*!< */ -#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ -#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ -#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ -#define RTC_TSTR_MNU_Pos (8U) -#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ -#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk /*!< */ -#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ -#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ -#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ -#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ -#define RTC_TSTR_ST_Pos (4U) -#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ -#define RTC_TSTR_ST RTC_TSTR_ST_Msk /*!< */ -#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ -#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ -#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ -#define RTC_TSTR_SU_Pos (0U) -#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ -#define RTC_TSTR_SU RTC_TSTR_SU_Msk /*!< */ -#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ -#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ -#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ -#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ - -/******************** Bits definition for RTC_TSDR register *****************/ -#define RTC_TSDR_WDU_Pos (13U) -#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ -#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< */ -#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ -#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ -#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ -#define RTC_TSDR_MT_Pos (12U) -#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ -#define RTC_TSDR_MT RTC_TSDR_MT_Msk /*!< */ -#define RTC_TSDR_MU_Pos (8U) -#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ -#define RTC_TSDR_MU RTC_TSDR_MU_Msk /*!< */ -#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ -#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ -#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ -#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ -#define RTC_TSDR_DT_Pos (4U) -#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ -#define RTC_TSDR_DT RTC_TSDR_DT_Msk /*!< */ -#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ -#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ -#define RTC_TSDR_DU_Pos (0U) -#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ -#define RTC_TSDR_DU RTC_TSDR_DU_Msk /*!< */ -#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ -#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ -#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ -#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ - -/******************** Bits definition for RTC_TSSSR register ****************/ -#define RTC_TSSSR_SS_Pos (0U) -#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ -#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk - -/******************** Bits definition for RTC_CALR register *****************/ -#define RTC_CALR_CALP_Pos (15U) -#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ -#define RTC_CALR_CALP RTC_CALR_CALP_Msk /*!< */ -#define RTC_CALR_CALW8_Pos (14U) -#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ -#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk /*!< */ -#define RTC_CALR_CALW16_Pos (13U) -#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ -#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk /*!< */ -#define RTC_CALR_CALM_Pos (0U) -#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ -#define RTC_CALR_CALM RTC_CALR_CALM_Msk /*!< */ -#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ -#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ -#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ -#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ -#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ -#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ -#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ -#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ -#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ - -/* Legacy defines */ -#define RTC_CAL_CALP RTC_CALR_CALP -#define RTC_CAL_CALW8 RTC_CALR_CALW8 -#define RTC_CAL_CALW16 RTC_CALR_CALW16 -#define RTC_CAL_CALM RTC_CALR_CALM -#define RTC_CAL_CALM_0 RTC_CALR_CALM_0 -#define RTC_CAL_CALM_1 RTC_CALR_CALM_1 -#define RTC_CAL_CALM_2 RTC_CALR_CALM_2 -#define RTC_CAL_CALM_3 RTC_CALR_CALM_3 -#define RTC_CAL_CALM_4 RTC_CALR_CALM_4 -#define RTC_CAL_CALM_5 RTC_CALR_CALM_5 -#define RTC_CAL_CALM_6 RTC_CALR_CALM_6 -#define RTC_CAL_CALM_7 RTC_CALR_CALM_7 -#define RTC_CAL_CALM_8 RTC_CALR_CALM_8 - -/******************** Bits definition for RTC_TAMPCR register ****************/ -#define RTC_TAMPCR_TAMP2MF_Pos (21U) -#define RTC_TAMPCR_TAMP2MF_Msk (0x1UL << RTC_TAMPCR_TAMP2MF_Pos) /*!< 0x00200000 */ -#define RTC_TAMPCR_TAMP2MF RTC_TAMPCR_TAMP2MF_Msk /*!< */ -#define RTC_TAMPCR_TAMP2NOERASE_Pos (20U) -#define RTC_TAMPCR_TAMP2NOERASE_Msk (0x1UL << RTC_TAMPCR_TAMP2NOERASE_Pos) /*!< 0x00100000 */ -#define RTC_TAMPCR_TAMP2NOERASE RTC_TAMPCR_TAMP2NOERASE_Msk /*!< */ -#define RTC_TAMPCR_TAMP2IE_Pos (19U) -#define RTC_TAMPCR_TAMP2IE_Msk (0x1UL << RTC_TAMPCR_TAMP2IE_Pos) /*!< 0x00080000 */ -#define RTC_TAMPCR_TAMP2IE RTC_TAMPCR_TAMP2IE_Msk /*!< */ -#define RTC_TAMPCR_TAMP1MF_Pos (18U) -#define RTC_TAMPCR_TAMP1MF_Msk (0x1UL << RTC_TAMPCR_TAMP1MF_Pos) /*!< 0x00040000 */ -#define RTC_TAMPCR_TAMP1MF RTC_TAMPCR_TAMP1MF_Msk /*!< */ -#define RTC_TAMPCR_TAMP1NOERASE_Pos (17U) -#define RTC_TAMPCR_TAMP1NOERASE_Msk (0x1UL << RTC_TAMPCR_TAMP1NOERASE_Pos) /*!< 0x00020000 */ -#define RTC_TAMPCR_TAMP1NOERASE RTC_TAMPCR_TAMP1NOERASE_Msk /*!< */ -#define RTC_TAMPCR_TAMP1IE_Pos (16U) -#define RTC_TAMPCR_TAMP1IE_Msk (0x1UL << RTC_TAMPCR_TAMP1IE_Pos) /*!< 0x00010000 */ -#define RTC_TAMPCR_TAMP1IE RTC_TAMPCR_TAMP1IE_Msk /*!< */ -#define RTC_TAMPCR_TAMPPUDIS_Pos (15U) -#define RTC_TAMPCR_TAMPPUDIS_Msk (0x1UL << RTC_TAMPCR_TAMPPUDIS_Pos) /*!< 0x00008000 */ -#define RTC_TAMPCR_TAMPPUDIS RTC_TAMPCR_TAMPPUDIS_Msk /*!< */ -#define RTC_TAMPCR_TAMPPRCH_Pos (13U) -#define RTC_TAMPCR_TAMPPRCH_Msk (0x3UL << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00006000 */ -#define RTC_TAMPCR_TAMPPRCH RTC_TAMPCR_TAMPPRCH_Msk /*!< */ -#define RTC_TAMPCR_TAMPPRCH_0 (0x1UL << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00002000 */ -#define RTC_TAMPCR_TAMPPRCH_1 (0x2UL << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00004000 */ -#define RTC_TAMPCR_TAMPFLT_Pos (11U) -#define RTC_TAMPCR_TAMPFLT_Msk (0x3UL << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00001800 */ -#define RTC_TAMPCR_TAMPFLT RTC_TAMPCR_TAMPFLT_Msk /*!< */ -#define RTC_TAMPCR_TAMPFLT_0 (0x1UL << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00000800 */ -#define RTC_TAMPCR_TAMPFLT_1 (0x2UL << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00001000 */ -#define RTC_TAMPCR_TAMPFREQ_Pos (8U) -#define RTC_TAMPCR_TAMPFREQ_Msk (0x7UL << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000700 */ -#define RTC_TAMPCR_TAMPFREQ RTC_TAMPCR_TAMPFREQ_Msk /*!< */ -#define RTC_TAMPCR_TAMPFREQ_0 (0x1UL << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000100 */ -#define RTC_TAMPCR_TAMPFREQ_1 (0x2UL << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000200 */ -#define RTC_TAMPCR_TAMPFREQ_2 (0x4UL << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000400 */ -#define RTC_TAMPCR_TAMPTS_Pos (7U) -#define RTC_TAMPCR_TAMPTS_Msk (0x1UL << RTC_TAMPCR_TAMPTS_Pos) /*!< 0x00000080 */ -#define RTC_TAMPCR_TAMPTS RTC_TAMPCR_TAMPTS_Msk /*!< */ -#define RTC_TAMPCR_TAMP2TRG_Pos (4U) -#define RTC_TAMPCR_TAMP2TRG_Msk (0x1UL << RTC_TAMPCR_TAMP2TRG_Pos) /*!< 0x00000010 */ -#define RTC_TAMPCR_TAMP2TRG RTC_TAMPCR_TAMP2TRG_Msk /*!< */ -#define RTC_TAMPCR_TAMP2E_Pos (3U) -#define RTC_TAMPCR_TAMP2E_Msk (0x1UL << RTC_TAMPCR_TAMP2E_Pos) /*!< 0x00000008 */ -#define RTC_TAMPCR_TAMP2E RTC_TAMPCR_TAMP2E_Msk /*!< */ -#define RTC_TAMPCR_TAMPIE_Pos (2U) -#define RTC_TAMPCR_TAMPIE_Msk (0x1UL << RTC_TAMPCR_TAMPIE_Pos) /*!< 0x00000004 */ -#define RTC_TAMPCR_TAMPIE RTC_TAMPCR_TAMPIE_Msk /*!< */ -#define RTC_TAMPCR_TAMP1TRG_Pos (1U) -#define RTC_TAMPCR_TAMP1TRG_Msk (0x1UL << RTC_TAMPCR_TAMP1TRG_Pos) /*!< 0x00000002 */ -#define RTC_TAMPCR_TAMP1TRG RTC_TAMPCR_TAMP1TRG_Msk /*!< */ -#define RTC_TAMPCR_TAMP1E_Pos (0U) -#define RTC_TAMPCR_TAMP1E_Msk (0x1UL << RTC_TAMPCR_TAMP1E_Pos) /*!< 0x00000001 */ -#define RTC_TAMPCR_TAMP1E RTC_TAMPCR_TAMP1E_Msk /*!< */ - -/******************** Bits definition for RTC_ALRMASSR register *************/ -#define RTC_ALRMASSR_MASKSS_Pos (24U) -#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ -#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk -#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ -#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ -#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ -#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ -#define RTC_ALRMASSR_SS_Pos (0U) -#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ -#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk - -/******************** Bits definition for RTC_ALRMBSSR register *************/ -#define RTC_ALRMBSSR_MASKSS_Pos (24U) -#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ -#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk -#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ -#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ -#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ -#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ -#define RTC_ALRMBSSR_SS_Pos (0U) -#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ -#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk - -/******************** Bits definition for RTC_OR register ****************/ -#define RTC_OR_OUT_RMP_Pos (1U) -#define RTC_OR_OUT_RMP_Msk (0x1UL << RTC_OR_OUT_RMP_Pos) /*!< 0x00000002 */ -#define RTC_OR_OUT_RMP RTC_OR_OUT_RMP_Msk /*!< */ -#define RTC_OR_ALARMOUTTYPE_Pos (0U) -#define RTC_OR_ALARMOUTTYPE_Msk (0x1UL << RTC_OR_ALARMOUTTYPE_Pos) /*!< 0x00000001 */ -#define RTC_OR_ALARMOUTTYPE RTC_OR_ALARMOUTTYPE_Msk /*!< */ - -/* Legacy defines */ -#define RTC_OR_RTC_OUT_RMP RTC_OR_OUT_RMP - -/******************** Bits definition for RTC_BKP0R register ****************/ -#define RTC_BKP0R_Pos (0U) -#define RTC_BKP0R_Msk (0xFFFFFFFFUL << RTC_BKP0R_Pos) /*!< 0xFFFFFFFF */ -#define RTC_BKP0R RTC_BKP0R_Msk /*!< */ - -/******************** Bits definition for RTC_BKP1R register ****************/ -#define RTC_BKP1R_Pos (0U) -#define RTC_BKP1R_Msk (0xFFFFFFFFUL << RTC_BKP1R_Pos) /*!< 0xFFFFFFFF */ -#define RTC_BKP1R RTC_BKP1R_Msk /*!< */ - -/******************** Bits definition for RTC_BKP2R register ****************/ -#define RTC_BKP2R_Pos (0U) -#define RTC_BKP2R_Msk (0xFFFFFFFFUL << RTC_BKP2R_Pos) /*!< 0xFFFFFFFF */ -#define RTC_BKP2R RTC_BKP2R_Msk /*!< */ - -/******************** Bits definition for RTC_BKP3R register ****************/ -#define RTC_BKP3R_Pos (0U) -#define RTC_BKP3R_Msk (0xFFFFFFFFUL << RTC_BKP3R_Pos) /*!< 0xFFFFFFFF */ -#define RTC_BKP3R RTC_BKP3R_Msk /*!< */ - -/******************** Bits definition for RTC_BKP4R register ****************/ -#define RTC_BKP4R_Pos (0U) -#define RTC_BKP4R_Msk (0xFFFFFFFFUL << RTC_BKP4R_Pos) /*!< 0xFFFFFFFF */ -#define RTC_BKP4R RTC_BKP4R_Msk /*!< */ - -/******************** Number of backup registers ******************************/ -#define RTC_BKP_NUMBER (0x00000005U) /*!< */ - -/******************************************************************************/ -/* */ -/* Serial Peripheral Interface (SPI) */ -/* */ -/******************************************************************************/ - -/* - * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) - */ -#define SPI_I2S_SUPPORT /*!< I2S support */ - -/******************* Bit definition for SPI_CR1 register ********************/ -#define SPI_CR1_CPHA_Pos (0U) -#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ -#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*!< Clock Phase */ -#define SPI_CR1_CPOL_Pos (1U) -#define SPI_CR1_CPOL_Msk (0x1UL << SPI_CR1_CPOL_Pos) /*!< 0x00000002 */ -#define SPI_CR1_CPOL SPI_CR1_CPOL_Msk /*!< Clock Polarity */ -#define SPI_CR1_MSTR_Pos (2U) -#define SPI_CR1_MSTR_Msk (0x1UL << SPI_CR1_MSTR_Pos) /*!< 0x00000004 */ -#define SPI_CR1_MSTR SPI_CR1_MSTR_Msk /*!< Master Selection */ -#define SPI_CR1_BR_Pos (3U) -#define SPI_CR1_BR_Msk (0x7UL << SPI_CR1_BR_Pos) /*!< 0x00000038 */ -#define SPI_CR1_BR SPI_CR1_BR_Msk /*!< BR[2:0] bits (Baud Rate Control) */ -#define SPI_CR1_BR_0 (0x1UL << SPI_CR1_BR_Pos) /*!< 0x00000008 */ -#define SPI_CR1_BR_1 (0x2UL << SPI_CR1_BR_Pos) /*!< 0x00000010 */ -#define SPI_CR1_BR_2 (0x4UL << SPI_CR1_BR_Pos) /*!< 0x00000020 */ -#define SPI_CR1_SPE_Pos (6U) -#define SPI_CR1_SPE_Msk (0x1UL << SPI_CR1_SPE_Pos) /*!< 0x00000040 */ -#define SPI_CR1_SPE SPI_CR1_SPE_Msk /*!< SPI Enable */ -#define SPI_CR1_LSBFIRST_Pos (7U) -#define SPI_CR1_LSBFIRST_Msk (0x1UL << SPI_CR1_LSBFIRST_Pos) /*!< 0x00000080 */ -#define SPI_CR1_LSBFIRST SPI_CR1_LSBFIRST_Msk /*!< Frame Format */ -#define SPI_CR1_SSI_Pos (8U) -#define SPI_CR1_SSI_Msk (0x1UL << SPI_CR1_SSI_Pos) /*!< 0x00000100 */ -#define SPI_CR1_SSI SPI_CR1_SSI_Msk /*!< Internal slave select */ -#define SPI_CR1_SSM_Pos (9U) -#define SPI_CR1_SSM_Msk (0x1UL << SPI_CR1_SSM_Pos) /*!< 0x00000200 */ -#define SPI_CR1_SSM SPI_CR1_SSM_Msk /*!< Software slave management */ -#define SPI_CR1_RXONLY_Pos (10U) -#define SPI_CR1_RXONLY_Msk (0x1UL << SPI_CR1_RXONLY_Pos) /*!< 0x00000400 */ -#define SPI_CR1_RXONLY SPI_CR1_RXONLY_Msk /*!< Receive only */ -#define SPI_CR1_DFF_Pos (11U) -#define SPI_CR1_DFF_Msk (0x1UL << SPI_CR1_DFF_Pos) /*!< 0x00000800 */ -#define SPI_CR1_DFF SPI_CR1_DFF_Msk /*!< Data Frame Format */ -#define SPI_CR1_CRCNEXT_Pos (12U) -#define SPI_CR1_CRCNEXT_Msk (0x1UL << SPI_CR1_CRCNEXT_Pos) /*!< 0x00001000 */ -#define SPI_CR1_CRCNEXT SPI_CR1_CRCNEXT_Msk /*!< Transmit CRC next */ -#define SPI_CR1_CRCEN_Pos (13U) -#define SPI_CR1_CRCEN_Msk (0x1UL << SPI_CR1_CRCEN_Pos) /*!< 0x00002000 */ -#define SPI_CR1_CRCEN SPI_CR1_CRCEN_Msk /*!< Hardware CRC calculation enable */ -#define SPI_CR1_BIDIOE_Pos (14U) -#define SPI_CR1_BIDIOE_Msk (0x1UL << SPI_CR1_BIDIOE_Pos) /*!< 0x00004000 */ -#define SPI_CR1_BIDIOE SPI_CR1_BIDIOE_Msk /*!< Output enable in bidirectional mode */ -#define SPI_CR1_BIDIMODE_Pos (15U) -#define SPI_CR1_BIDIMODE_Msk (0x1UL << SPI_CR1_BIDIMODE_Pos) /*!< 0x00008000 */ -#define SPI_CR1_BIDIMODE SPI_CR1_BIDIMODE_Msk /*!< Bidirectional data mode enable */ - -/******************* Bit definition for SPI_CR2 register ********************/ -#define SPI_CR2_RXDMAEN_Pos (0U) -#define SPI_CR2_RXDMAEN_Msk (0x1UL << SPI_CR2_RXDMAEN_Pos) /*!< 0x00000001 */ -#define SPI_CR2_RXDMAEN SPI_CR2_RXDMAEN_Msk /*!< Rx Buffer DMA Enable */ -#define SPI_CR2_TXDMAEN_Pos (1U) -#define SPI_CR2_TXDMAEN_Msk (0x1UL << SPI_CR2_TXDMAEN_Pos) /*!< 0x00000002 */ -#define SPI_CR2_TXDMAEN SPI_CR2_TXDMAEN_Msk /*!< Tx Buffer DMA Enable */ -#define SPI_CR2_SSOE_Pos (2U) -#define SPI_CR2_SSOE_Msk (0x1UL << SPI_CR2_SSOE_Pos) /*!< 0x00000004 */ -#define SPI_CR2_SSOE SPI_CR2_SSOE_Msk /*!< SS Output Enable */ -#define SPI_CR2_FRF_Pos (4U) -#define SPI_CR2_FRF_Msk (0x1UL << SPI_CR2_FRF_Pos) /*!< 0x00000010 */ -#define SPI_CR2_FRF SPI_CR2_FRF_Msk /*!< Frame Format Enable */ -#define SPI_CR2_ERRIE_Pos (5U) -#define SPI_CR2_ERRIE_Msk (0x1UL << SPI_CR2_ERRIE_Pos) /*!< 0x00000020 */ -#define SPI_CR2_ERRIE SPI_CR2_ERRIE_Msk /*!< Error Interrupt Enable */ -#define SPI_CR2_RXNEIE_Pos (6U) -#define SPI_CR2_RXNEIE_Msk (0x1UL << SPI_CR2_RXNEIE_Pos) /*!< 0x00000040 */ -#define SPI_CR2_RXNEIE SPI_CR2_RXNEIE_Msk /*!< RX buffer Not Empty Interrupt Enable */ -#define SPI_CR2_TXEIE_Pos (7U) -#define SPI_CR2_TXEIE_Msk (0x1UL << SPI_CR2_TXEIE_Pos) /*!< 0x00000080 */ -#define SPI_CR2_TXEIE SPI_CR2_TXEIE_Msk /*!< Tx buffer Empty Interrupt Enable */ - -/******************** Bit definition for SPI_SR register ********************/ -#define SPI_SR_RXNE_Pos (0U) -#define SPI_SR_RXNE_Msk (0x1UL << SPI_SR_RXNE_Pos) /*!< 0x00000001 */ -#define SPI_SR_RXNE SPI_SR_RXNE_Msk /*!< Receive buffer Not Empty */ -#define SPI_SR_TXE_Pos (1U) -#define SPI_SR_TXE_Msk (0x1UL << SPI_SR_TXE_Pos) /*!< 0x00000002 */ -#define SPI_SR_TXE SPI_SR_TXE_Msk /*!< Transmit buffer Empty */ -#define SPI_SR_CHSIDE_Pos (2U) -#define SPI_SR_CHSIDE_Msk (0x1UL << SPI_SR_CHSIDE_Pos) /*!< 0x00000004 */ -#define SPI_SR_CHSIDE SPI_SR_CHSIDE_Msk /*!< Channel side */ -#define SPI_SR_UDR_Pos (3U) -#define SPI_SR_UDR_Msk (0x1UL << SPI_SR_UDR_Pos) /*!< 0x00000008 */ -#define SPI_SR_UDR SPI_SR_UDR_Msk /*!< Underrun flag */ -#define SPI_SR_CRCERR_Pos (4U) -#define SPI_SR_CRCERR_Msk (0x1UL << SPI_SR_CRCERR_Pos) /*!< 0x00000010 */ -#define SPI_SR_CRCERR SPI_SR_CRCERR_Msk /*!< CRC Error flag */ -#define SPI_SR_MODF_Pos (5U) -#define SPI_SR_MODF_Msk (0x1UL << SPI_SR_MODF_Pos) /*!< 0x00000020 */ -#define SPI_SR_MODF SPI_SR_MODF_Msk /*!< Mode fault */ -#define SPI_SR_OVR_Pos (6U) -#define SPI_SR_OVR_Msk (0x1UL << SPI_SR_OVR_Pos) /*!< 0x00000040 */ -#define SPI_SR_OVR SPI_SR_OVR_Msk /*!< Overrun flag */ -#define SPI_SR_BSY_Pos (7U) -#define SPI_SR_BSY_Msk (0x1UL << SPI_SR_BSY_Pos) /*!< 0x00000080 */ -#define SPI_SR_BSY SPI_SR_BSY_Msk /*!< Busy flag */ -#define SPI_SR_FRE_Pos (8U) -#define SPI_SR_FRE_Msk (0x1UL << SPI_SR_FRE_Pos) /*!< 0x00000100 */ -#define SPI_SR_FRE SPI_SR_FRE_Msk /*!< TI frame format error */ - -/******************** Bit definition for SPI_DR register ********************/ -#define SPI_DR_DR_Pos (0U) -#define SPI_DR_DR_Msk (0xFFFFUL << SPI_DR_DR_Pos) /*!< 0x0000FFFF */ -#define SPI_DR_DR SPI_DR_DR_Msk /*!< Data Register */ - -/******************* Bit definition for SPI_CRCPR register ******************/ -#define SPI_CRCPR_CRCPOLY_Pos (0U) -#define SPI_CRCPR_CRCPOLY_Msk (0xFFFFUL << SPI_CRCPR_CRCPOLY_Pos) /*!< 0x0000FFFF */ -#define SPI_CRCPR_CRCPOLY SPI_CRCPR_CRCPOLY_Msk /*!< CRC polynomial register */ - -/****************** Bit definition for SPI_RXCRCR register ******************/ -#define SPI_RXCRCR_RXCRC_Pos (0U) -#define SPI_RXCRCR_RXCRC_Msk (0xFFFFUL << SPI_RXCRCR_RXCRC_Pos) /*!< 0x0000FFFF */ -#define SPI_RXCRCR_RXCRC SPI_RXCRCR_RXCRC_Msk /*!< Rx CRC Register */ - -/****************** Bit definition for SPI_TXCRCR register ******************/ -#define SPI_TXCRCR_TXCRC_Pos (0U) -#define SPI_TXCRCR_TXCRC_Msk (0xFFFFUL << SPI_TXCRCR_TXCRC_Pos) /*!< 0x0000FFFF */ -#define SPI_TXCRCR_TXCRC SPI_TXCRCR_TXCRC_Msk /*!< Tx CRC Register */ - -/****************** Bit definition for SPI_I2SCFGR register *****************/ -#define SPI_I2SCFGR_CHLEN_Pos (0U) -#define SPI_I2SCFGR_CHLEN_Msk (0x1UL << SPI_I2SCFGR_CHLEN_Pos) /*!< 0x00000001 */ -#define SPI_I2SCFGR_CHLEN SPI_I2SCFGR_CHLEN_Msk /*!<Channel length (number of bits per audio channel) */ -#define SPI_I2SCFGR_DATLEN_Pos (1U) -#define SPI_I2SCFGR_DATLEN_Msk (0x3UL << SPI_I2SCFGR_DATLEN_Pos) /*!< 0x00000006 */ -#define SPI_I2SCFGR_DATLEN SPI_I2SCFGR_DATLEN_Msk /*!<DATLEN[1:0] bits (Data length to be transferred) */ -#define SPI_I2SCFGR_DATLEN_0 (0x1UL << SPI_I2SCFGR_DATLEN_Pos) /*!< 0x00000002 */ -#define SPI_I2SCFGR_DATLEN_1 (0x2UL << SPI_I2SCFGR_DATLEN_Pos) /*!< 0x00000004 */ -#define SPI_I2SCFGR_CKPOL_Pos (3U) -#define SPI_I2SCFGR_CKPOL_Msk (0x1UL << SPI_I2SCFGR_CKPOL_Pos) /*!< 0x00000008 */ -#define SPI_I2SCFGR_CKPOL SPI_I2SCFGR_CKPOL_Msk /*!<steady state clock polarity */ -#define SPI_I2SCFGR_I2SSTD_Pos (4U) -#define SPI_I2SCFGR_I2SSTD_Msk (0x3UL << SPI_I2SCFGR_I2SSTD_Pos) /*!< 0x00000030 */ -#define SPI_I2SCFGR_I2SSTD SPI_I2SCFGR_I2SSTD_Msk /*!<I2SSTD[1:0] bits (I2S standard selection) */ -#define SPI_I2SCFGR_I2SSTD_0 (0x1UL << SPI_I2SCFGR_I2SSTD_Pos) /*!< 0x00000010 */ -#define SPI_I2SCFGR_I2SSTD_1 (0x2UL << SPI_I2SCFGR_I2SSTD_Pos) /*!< 0x00000020 */ -#define SPI_I2SCFGR_PCMSYNC_Pos (7U) -#define SPI_I2SCFGR_PCMSYNC_Msk (0x1UL << SPI_I2SCFGR_PCMSYNC_Pos) /*!< 0x00000080 */ -#define SPI_I2SCFGR_PCMSYNC SPI_I2SCFGR_PCMSYNC_Msk /*!<PCM frame synchronization */ -#define SPI_I2SCFGR_I2SCFG_Pos (8U) -#define SPI_I2SCFGR_I2SCFG_Msk (0x3UL << SPI_I2SCFGR_I2SCFG_Pos) /*!< 0x00000300 */ -#define SPI_I2SCFGR_I2SCFG SPI_I2SCFGR_I2SCFG_Msk /*!<I2SCFG[1:0] bits (I2S configuration mode) */ -#define SPI_I2SCFGR_I2SCFG_0 (0x1UL << SPI_I2SCFGR_I2SCFG_Pos) /*!< 0x00000100 */ -#define SPI_I2SCFGR_I2SCFG_1 (0x2UL << SPI_I2SCFGR_I2SCFG_Pos) /*!< 0x00000200 */ -#define SPI_I2SCFGR_I2SE_Pos (10U) -#define SPI_I2SCFGR_I2SE_Msk (0x1UL << SPI_I2SCFGR_I2SE_Pos) /*!< 0x00000400 */ -#define SPI_I2SCFGR_I2SE SPI_I2SCFGR_I2SE_Msk /*!<I2S Enable */ -#define SPI_I2SCFGR_I2SMOD_Pos (11U) -#define SPI_I2SCFGR_I2SMOD_Msk (0x1UL << SPI_I2SCFGR_I2SMOD_Pos) /*!< 0x00000800 */ -#define SPI_I2SCFGR_I2SMOD SPI_I2SCFGR_I2SMOD_Msk /*!<I2S mode selection */ -/****************** Bit definition for SPI_I2SPR register *******************/ -#define SPI_I2SPR_I2SDIV_Pos (0U) -#define SPI_I2SPR_I2SDIV_Msk (0xFFUL << SPI_I2SPR_I2SDIV_Pos) /*!< 0x000000FF */ -#define SPI_I2SPR_I2SDIV SPI_I2SPR_I2SDIV_Msk /*!<I2S Linear prescaler */ -#define SPI_I2SPR_ODD_Pos (8U) -#define SPI_I2SPR_ODD_Msk (0x1UL << SPI_I2SPR_ODD_Pos) /*!< 0x00000100 */ -#define SPI_I2SPR_ODD SPI_I2SPR_ODD_Msk /*!<Odd factor for the prescaler */ -#define SPI_I2SPR_MCKOE_Pos (9U) -#define SPI_I2SPR_MCKOE_Msk (0x1UL << SPI_I2SPR_MCKOE_Pos) /*!< 0x00000200 */ -#define SPI_I2SPR_MCKOE SPI_I2SPR_MCKOE_Msk /*!<Master Clock Output Enable */ - -/******************************************************************************/ -/* */ -/* System Configuration (SYSCFG) */ -/* */ -/******************************************************************************/ -/***************** Bit definition for SYSCFG_CFGR1 register ****************/ -#define SYSCFG_CFGR1_MEM_MODE_Pos (0U) -#define SYSCFG_CFGR1_MEM_MODE_Msk (0x3UL << SYSCFG_CFGR1_MEM_MODE_Pos) /*!< 0x00000003 */ -#define SYSCFG_CFGR1_MEM_MODE SYSCFG_CFGR1_MEM_MODE_Msk /*!< SYSCFG_Memory Remap Config */ -#define SYSCFG_CFGR1_MEM_MODE_0 (0x1UL << SYSCFG_CFGR1_MEM_MODE_Pos) /*!< 0x00000001 */ -#define SYSCFG_CFGR1_MEM_MODE_1 (0x2UL << SYSCFG_CFGR1_MEM_MODE_Pos) /*!< 0x00000002 */ -#define SYSCFG_CFGR1_BOOT_MODE_Pos (8U) -#define SYSCFG_CFGR1_BOOT_MODE_Msk (0x3UL << SYSCFG_CFGR1_BOOT_MODE_Pos) /*!< 0x00000300 */ -#define SYSCFG_CFGR1_BOOT_MODE SYSCFG_CFGR1_BOOT_MODE_Msk /*!< SYSCFG_Boot mode Config */ -#define SYSCFG_CFGR1_BOOT_MODE_0 (0x1UL << SYSCFG_CFGR1_BOOT_MODE_Pos) /*!< 0x00000100 */ -#define SYSCFG_CFGR1_BOOT_MODE_1 (0x2UL << SYSCFG_CFGR1_BOOT_MODE_Pos) /*!< 0x00000200 */ - -/***************** Bit definition for SYSCFG_CFGR2 register ****************/ -#define SYSCFG_CFGR2_FWDISEN_Pos (0U) -#define SYSCFG_CFGR2_FWDISEN_Msk (0x1UL << SYSCFG_CFGR2_FWDISEN_Pos) /*!< 0x00000001 */ -#define SYSCFG_CFGR2_FWDISEN SYSCFG_CFGR2_FWDISEN_Msk /*!< Firewall disable bit */ -#define SYSCFG_CFGR2_I2C_PB6_FMP_Pos (8U) -#define SYSCFG_CFGR2_I2C_PB6_FMP_Msk (0x1UL << SYSCFG_CFGR2_I2C_PB6_FMP_Pos) /*!< 0x00000100 */ -#define SYSCFG_CFGR2_I2C_PB6_FMP SYSCFG_CFGR2_I2C_PB6_FMP_Msk /*!< I2C PB6 Fast mode plus */ -#define SYSCFG_CFGR2_I2C_PB7_FMP_Pos (9U) -#define SYSCFG_CFGR2_I2C_PB7_FMP_Msk (0x1UL << SYSCFG_CFGR2_I2C_PB7_FMP_Pos) /*!< 0x00000200 */ -#define SYSCFG_CFGR2_I2C_PB7_FMP SYSCFG_CFGR2_I2C_PB7_FMP_Msk /*!< I2C PB7 Fast mode plus */ -#define SYSCFG_CFGR2_I2C_PB8_FMP_Pos (10U) -#define SYSCFG_CFGR2_I2C_PB8_FMP_Msk (0x1UL << SYSCFG_CFGR2_I2C_PB8_FMP_Pos) /*!< 0x00000400 */ -#define SYSCFG_CFGR2_I2C_PB8_FMP SYSCFG_CFGR2_I2C_PB8_FMP_Msk /*!< I2C PB8 Fast mode plus */ -#define SYSCFG_CFGR2_I2C_PB9_FMP_Pos (11U) -#define SYSCFG_CFGR2_I2C_PB9_FMP_Msk (0x1UL << SYSCFG_CFGR2_I2C_PB9_FMP_Pos) /*!< 0x00000800 */ -#define SYSCFG_CFGR2_I2C_PB9_FMP SYSCFG_CFGR2_I2C_PB9_FMP_Msk /*!< I2C PB9 Fast mode plus */ -#define SYSCFG_CFGR2_I2C1_FMP_Pos (12U) -#define SYSCFG_CFGR2_I2C1_FMP_Msk (0x1UL << SYSCFG_CFGR2_I2C1_FMP_Pos) /*!< 0x00001000 */ -#define SYSCFG_CFGR2_I2C1_FMP SYSCFG_CFGR2_I2C1_FMP_Msk /*!< I2C1 Fast mode plus */ -#define SYSCFG_CFGR2_I2C2_FMP_Pos (13U) -#define SYSCFG_CFGR2_I2C2_FMP_Msk (0x1UL << SYSCFG_CFGR2_I2C2_FMP_Pos) /*!< 0x00002000 */ -#define SYSCFG_CFGR2_I2C2_FMP SYSCFG_CFGR2_I2C2_FMP_Msk /*!< I2C2 Fast mode plus */ - -/***************** Bit definition for SYSCFG_EXTICR1 register ***************/ -#define SYSCFG_EXTICR1_EXTI0_Pos (0U) -#define SYSCFG_EXTICR1_EXTI0_Msk (0xFUL << SYSCFG_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ -#define SYSCFG_EXTICR1_EXTI0 SYSCFG_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ -#define SYSCFG_EXTICR1_EXTI1_Pos (4U) -#define SYSCFG_EXTICR1_EXTI1_Msk (0xFUL << SYSCFG_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ -#define SYSCFG_EXTICR1_EXTI1 SYSCFG_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ -#define SYSCFG_EXTICR1_EXTI2_Pos (8U) -#define SYSCFG_EXTICR1_EXTI2_Msk (0xFUL << SYSCFG_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ -#define SYSCFG_EXTICR1_EXTI2 SYSCFG_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ -#define SYSCFG_EXTICR1_EXTI3_Pos (12U) -#define SYSCFG_EXTICR1_EXTI3_Msk (0xFUL << SYSCFG_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ -#define SYSCFG_EXTICR1_EXTI3 SYSCFG_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ - -/** - * @brief EXTI0 configuration - */ -#define SYSCFG_EXTICR1_EXTI0_PA (0x00000000U) /*!< PA[0] pin */ -#define SYSCFG_EXTICR1_EXTI0_PB (0x00000001U) /*!< PB[0] pin */ -#define SYSCFG_EXTICR1_EXTI0_PC (0x00000002U) /*!< PC[0] pin */ -#define SYSCFG_EXTICR1_EXTI0_PH (0x00000005U) /*!< PH[0] pin */ - -/** - * @brief EXTI1 configuration - */ -#define SYSCFG_EXTICR1_EXTI1_PA (0x00000000U) /*!< PA[1] pin */ -#define SYSCFG_EXTICR1_EXTI1_PB (0x00000010U) /*!< PB[1] pin */ -#define SYSCFG_EXTICR1_EXTI1_PC (0x00000020U) /*!< PC[1] pin */ -#define SYSCFG_EXTICR1_EXTI1_PH (0x00000050U) /*!< PH[1] pin */ - -/** - * @brief EXTI2 configuration - */ -#define SYSCFG_EXTICR1_EXTI2_PA (0x00000000U) /*!< PA[2] pin */ -#define SYSCFG_EXTICR1_EXTI2_PB (0x00000100U) /*!< PB[2] pin */ -#define SYSCFG_EXTICR1_EXTI2_PC (0x00000200U) /*!< PC[2] pin */ -#define SYSCFG_EXTICR1_EXTI2_PD (0x00000300U) /*!< PD[2] pin */ - -/** - * @brief EXTI3 configuration - */ -#define SYSCFG_EXTICR1_EXTI3_PA (0x00000000U) /*!< PA[3] pin */ -#define SYSCFG_EXTICR1_EXTI3_PB (0x00001000U) /*!< PB[3] pin */ -#define SYSCFG_EXTICR1_EXTI3_PC (0x00002000U) /*!< PC[3] pin */ - -/***************** Bit definition for SYSCFG_EXTICR2 register *****************/ -#define SYSCFG_EXTICR2_EXTI4_Pos (0U) -#define SYSCFG_EXTICR2_EXTI4_Msk (0xFUL << SYSCFG_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ -#define SYSCFG_EXTICR2_EXTI4 SYSCFG_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ -#define SYSCFG_EXTICR2_EXTI5_Pos (4U) -#define SYSCFG_EXTICR2_EXTI5_Msk (0xFUL << SYSCFG_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ -#define SYSCFG_EXTICR2_EXTI5 SYSCFG_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ -#define SYSCFG_EXTICR2_EXTI6_Pos (8U) -#define SYSCFG_EXTICR2_EXTI6_Msk (0xFUL << SYSCFG_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ -#define SYSCFG_EXTICR2_EXTI6 SYSCFG_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ -#define SYSCFG_EXTICR2_EXTI7_Pos (12U) -#define SYSCFG_EXTICR2_EXTI7_Msk (0xFUL << SYSCFG_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ -#define SYSCFG_EXTICR2_EXTI7 SYSCFG_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ - -/** - * @brief EXTI4 configuration - */ -#define SYSCFG_EXTICR2_EXTI4_PA (0x00000000U) /*!< PA[4] pin */ -#define SYSCFG_EXTICR2_EXTI4_PB (0x00000001U) /*!< PB[4] pin */ -#define SYSCFG_EXTICR2_EXTI4_PC (0x00000002U) /*!< PC[4] pin */ - -/** - * @brief EXTI5 configuration - */ -#define SYSCFG_EXTICR2_EXTI5_PA (0x00000000U) /*!< PA[5] pin */ -#define SYSCFG_EXTICR2_EXTI5_PB (0x00000010U) /*!< PB[5] pin */ -#define SYSCFG_EXTICR2_EXTI5_PC (0x00000020U) /*!< PC[5] pin */ - -/** - * @brief EXTI6 configuration - */ -#define SYSCFG_EXTICR2_EXTI6_PA (0x00000000U) /*!< PA[6] pin */ -#define SYSCFG_EXTICR2_EXTI6_PB (0x00000100U) /*!< PB[6] pin */ -#define SYSCFG_EXTICR2_EXTI6_PC (0x00000200U) /*!< PC[6] pin */ - -/** - * @brief EXTI7 configuration - */ -#define SYSCFG_EXTICR2_EXTI7_PA (0x00000000U) /*!< PA[7] pin */ -#define SYSCFG_EXTICR2_EXTI7_PB (0x00001000U) /*!< PB[7] pin */ -#define SYSCFG_EXTICR2_EXTI7_PC (0x00002000U) /*!< PC[7] pin */ - -/***************** Bit definition for SYSCFG_EXTICR3 register *****************/ -#define SYSCFG_EXTICR3_EXTI8_Pos (0U) -#define SYSCFG_EXTICR3_EXTI8_Msk (0xFUL << SYSCFG_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ -#define SYSCFG_EXTICR3_EXTI8 SYSCFG_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ -#define SYSCFG_EXTICR3_EXTI9_Pos (4U) -#define SYSCFG_EXTICR3_EXTI9_Msk (0xFUL << SYSCFG_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ -#define SYSCFG_EXTICR3_EXTI9 SYSCFG_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ -#define SYSCFG_EXTICR3_EXTI10_Pos (8U) -#define SYSCFG_EXTICR3_EXTI10_Msk (0xFUL << SYSCFG_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ -#define SYSCFG_EXTICR3_EXTI10 SYSCFG_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ -#define SYSCFG_EXTICR3_EXTI11_Pos (12U) -#define SYSCFG_EXTICR3_EXTI11_Msk (0xFUL << SYSCFG_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ -#define SYSCFG_EXTICR3_EXTI11 SYSCFG_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ - -/** - * @brief EXTI8 configuration - */ -#define SYSCFG_EXTICR3_EXTI8_PA (0x00000000U) /*!< PA[8] pin */ -#define SYSCFG_EXTICR3_EXTI8_PB (0x00000001U) /*!< PB[8] pin */ -#define SYSCFG_EXTICR3_EXTI8_PC (0x00000002U) /*!< PC[8] pin */ - -/** - * @brief EXTI9 configuration - */ -#define SYSCFG_EXTICR3_EXTI9_PA (0x00000000U) /*!< PA[9] pin */ -#define SYSCFG_EXTICR3_EXTI9_PB (0x00000010U) /*!< PB[9] pin */ -#define SYSCFG_EXTICR3_EXTI9_PC (0x00000020U) /*!< PC[9] pin */ - -/** - * @brief EXTI10 configuration - */ -#define SYSCFG_EXTICR3_EXTI10_PA (0x00000000U) /*!< PA[10] pin */ -#define SYSCFG_EXTICR3_EXTI10_PB (0x00000100U) /*!< PB[10] pin */ -#define SYSCFG_EXTICR3_EXTI10_PC (0x00000200U) /*!< PC[10] pin */ - -/** - * @brief EXTI11 configuration - */ -#define SYSCFG_EXTICR3_EXTI11_PA (0x00000000U) /*!< PA[11] pin */ -#define SYSCFG_EXTICR3_EXTI11_PB (0x00001000U) /*!< PB[11] pin */ -#define SYSCFG_EXTICR3_EXTI11_PC (0x00002000U) /*!< PC[11] pin */ - -/***************** Bit definition for SYSCFG_EXTICR4 register *****************/ -#define SYSCFG_EXTICR4_EXTI12_Pos (0U) -#define SYSCFG_EXTICR4_EXTI12_Msk (0xFUL << SYSCFG_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ -#define SYSCFG_EXTICR4_EXTI12 SYSCFG_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ -#define SYSCFG_EXTICR4_EXTI13_Pos (4U) -#define SYSCFG_EXTICR4_EXTI13_Msk (0xFUL << SYSCFG_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ -#define SYSCFG_EXTICR4_EXTI13 SYSCFG_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ -#define SYSCFG_EXTICR4_EXTI14_Pos (8U) -#define SYSCFG_EXTICR4_EXTI14_Msk (0xFUL << SYSCFG_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ -#define SYSCFG_EXTICR4_EXTI14 SYSCFG_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ -#define SYSCFG_EXTICR4_EXTI15_Pos (12U) -#define SYSCFG_EXTICR4_EXTI15_Msk (0xFUL << SYSCFG_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ -#define SYSCFG_EXTICR4_EXTI15 SYSCFG_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ - -/** - * @brief EXTI12 configuration - */ -#define SYSCFG_EXTICR4_EXTI12_PA (0x00000000U) /*!< PA[12] pin */ -#define SYSCFG_EXTICR4_EXTI12_PB (0x00000001U) /*!< PB[12] pin */ -#define SYSCFG_EXTICR4_EXTI12_PC (0x00000002U) /*!< PC[12] pin */ - -/** - * @brief EXTI13 configuration - */ -#define SYSCFG_EXTICR4_EXTI13_PA (0x00000000U) /*!< PA[13] pin */ -#define SYSCFG_EXTICR4_EXTI13_PB (0x00000010U) /*!< PB[13] pin */ -#define SYSCFG_EXTICR4_EXTI13_PC (0x00000020U) /*!< PC[13] pin */ - -/** - * @brief EXTI14 configuration - */ -#define SYSCFG_EXTICR4_EXTI14_PA (0x00000000U) /*!< PA[14] pin */ -#define SYSCFG_EXTICR4_EXTI14_PB (0x00000100U) /*!< PB[14] pin */ -#define SYSCFG_EXTICR4_EXTI14_PC (0x00000200U) /*!< PC[14] pin */ - -/** - * @brief EXTI15 configuration - */ -#define SYSCFG_EXTICR4_EXTI15_PA (0x00000000U) /*!< PA[15] pin */ -#define SYSCFG_EXTICR4_EXTI15_PB (0x00001000U) /*!< PB[15] pin */ -#define SYSCFG_EXTICR4_EXTI15_PC (0x00002000U) /*!< PC[15] pin */ - - -/***************** Bit definition for SYSCFG_CFGR3 register ****************/ -#define SYSCFG_CFGR3_EN_VREFINT_Pos (0U) -#define SYSCFG_CFGR3_EN_VREFINT_Msk (0x1UL << SYSCFG_CFGR3_EN_VREFINT_Pos) /*!< 0x00000100 */ -#define SYSCFG_CFGR3_EN_VREFINT SYSCFG_CFGR3_EN_VREFINT_Msk /*!< Vref Enable bit */ -#define SYSCFG_CFGR3_VREF_OUT_Pos (4U) -#define SYSCFG_CFGR3_VREF_OUT_Msk (0x3UL << SYSCFG_CFGR3_VREF_OUT_Pos) /*!< 0x00000030 */ -#define SYSCFG_CFGR3_VREF_OUT SYSCFG_CFGR3_VREF_OUT_Msk /*!< Verf_ADC connection bit */ -#define SYSCFG_CFGR3_VREF_OUT_0 (0x1UL << SYSCFG_CFGR3_VREF_OUT_Pos) /*!< 0x00000010 */ -#define SYSCFG_CFGR3_VREF_OUT_1 (0x2UL << SYSCFG_CFGR3_VREF_OUT_Pos) /*!< 0x00000020 */ -#define SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Pos (8U) -#define SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Msk (0x1UL << SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Pos) /*!< 0x00000100 */ -#define SYSCFG_CFGR3_ENBUF_VREFINT_ADC SYSCFG_CFGR3_ENBUF_VREFINT_ADC_Msk /*!< VREFINT reference for ADC enable bit */ -#define SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Pos (9U) -#define SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Msk (0x1UL << SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Pos) /*!< 0x00000200 */ -#define SYSCFG_CFGR3_ENBUF_SENSOR_ADC SYSCFG_CFGR3_ENBUF_SENSOR_ADC_Msk /*!< Sensor reference for ADC enable bit */ -#define SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Pos (12U) -#define SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Msk (0x1UL << SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Pos) /*!< 0x00001000 */ -#define SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP_Msk /*!< VREFINT reference for comparator 2 enable bit */ -#define SYSCFG_CFGR3_VREFINT_RDYF_Pos (30U) -#define SYSCFG_CFGR3_VREFINT_RDYF_Msk (0x1UL << SYSCFG_CFGR3_VREFINT_RDYF_Pos) /*!< 0x40000000 */ -#define SYSCFG_CFGR3_VREFINT_RDYF SYSCFG_CFGR3_VREFINT_RDYF_Msk /*!< VREFINT ready flag */ -#define SYSCFG_CFGR3_REF_LOCK_Pos (31U) -#define SYSCFG_CFGR3_REF_LOCK_Msk (0x1UL << SYSCFG_CFGR3_REF_LOCK_Pos) /*!< 0x80000000 */ -#define SYSCFG_CFGR3_REF_LOCK SYSCFG_CFGR3_REF_LOCK_Msk /*!< CFGR3 lock bit */ - -/* Legacy defines */ - -#define SYSCFG_CFGR3_EN_BGAP SYSCFG_CFGR3_EN_VREFINT -#define SYSCFG_CFGR3_ENBUF_BGAP_ADC SYSCFG_CFGR3_ENBUF_VREFINT_ADC -#define SYSCFG_CFGR3_ENBUFLP_BGAP_COMP SYSCFG_CFGR3_ENBUFLP_VREFINT_COMP -#define SYSCFG_VREFINT_ADC_RDYF SYSCFG_CFGR3_VREFINT_RDYF -#define SYSCFG_CFGR3_SENSOR_ADC_RDYF SYSCFG_CFGR3_VREFINT_RDYF -#define SYSCFG_CFGR3_VREFINT_ADC_RDYF SYSCFG_CFGR3_VREFINT_RDYF -#define SYSCFG_CFGR3_VREFINT_COMP_RDYF SYSCFG_CFGR3_VREFINT_RDYF - -/******************************************************************************/ -/* */ -/* Timers (TIM)*/ -/* */ -/******************************************************************************/ -/* -* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) -*/ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif - -/******************* Bit definition for TIM_CR1 register ********************/ -#define TIM_CR1_CEN_Pos (0U) -#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ -#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!<Counter enable */ -#define TIM_CR1_UDIS_Pos (1U) -#define TIM_CR1_UDIS_Msk (0x1UL << TIM_CR1_UDIS_Pos) /*!< 0x00000002 */ -#define TIM_CR1_UDIS TIM_CR1_UDIS_Msk /*!<Update disable */ -#define TIM_CR1_URS_Pos (2U) -#define TIM_CR1_URS_Msk (0x1UL << TIM_CR1_URS_Pos) /*!< 0x00000004 */ -#define TIM_CR1_URS TIM_CR1_URS_Msk /*!<Update request source */ -#define TIM_CR1_OPM_Pos (3U) -#define TIM_CR1_OPM_Msk (0x1UL << TIM_CR1_OPM_Pos) /*!< 0x00000008 */ -#define TIM_CR1_OPM TIM_CR1_OPM_Msk /*!<One pulse mode */ -#define TIM_CR1_DIR_Pos (4U) -#define TIM_CR1_DIR_Msk (0x1UL << TIM_CR1_DIR_Pos) /*!< 0x00000010 */ -#define TIM_CR1_DIR TIM_CR1_DIR_Msk /*!<Direction */ - -#define TIM_CR1_CMS_Pos (5U) -#define TIM_CR1_CMS_Msk (0x3UL << TIM_CR1_CMS_Pos) /*!< 0x00000060 */ -#define TIM_CR1_CMS TIM_CR1_CMS_Msk /*!<CMS[1:0] bits (Center-aligned mode selection) */ -#define TIM_CR1_CMS_0 (0x1UL << TIM_CR1_CMS_Pos) /*!< 0x00000020 */ -#define TIM_CR1_CMS_1 (0x2UL << TIM_CR1_CMS_Pos) /*!< 0x00000040 */ - -#define TIM_CR1_ARPE_Pos (7U) -#define TIM_CR1_ARPE_Msk (0x1UL << TIM_CR1_ARPE_Pos) /*!< 0x00000080 */ -#define TIM_CR1_ARPE TIM_CR1_ARPE_Msk /*!<Auto-reload preload enable */ - -#define TIM_CR1_CKD_Pos (8U) -#define TIM_CR1_CKD_Msk (0x3UL << TIM_CR1_CKD_Pos) /*!< 0x00000300 */ -#define TIM_CR1_CKD TIM_CR1_CKD_Msk /*!<CKD[1:0] bits (clock division) */ -#define TIM_CR1_CKD_0 (0x1UL << TIM_CR1_CKD_Pos) /*!< 0x00000100 */ -#define TIM_CR1_CKD_1 (0x2UL << TIM_CR1_CKD_Pos) /*!< 0x00000200 */ - -/******************* Bit definition for TIM_CR2 register ********************/ -#define TIM_CR2_CCDS_Pos (3U) -#define TIM_CR2_CCDS_Msk (0x1UL << TIM_CR2_CCDS_Pos) /*!< 0x00000008 */ -#define TIM_CR2_CCDS TIM_CR2_CCDS_Msk /*!<Capture/Compare DMA Selection */ - -#define TIM_CR2_MMS_Pos (4U) -#define TIM_CR2_MMS_Msk (0x7UL << TIM_CR2_MMS_Pos) /*!< 0x00000070 */ -#define TIM_CR2_MMS TIM_CR2_MMS_Msk /*!<MMS[2:0] bits (Master Mode Selection) */ -#define TIM_CR2_MMS_0 (0x1UL << TIM_CR2_MMS_Pos) /*!< 0x00000010 */ -#define TIM_CR2_MMS_1 (0x2UL << TIM_CR2_MMS_Pos) /*!< 0x00000020 */ -#define TIM_CR2_MMS_2 (0x4UL << TIM_CR2_MMS_Pos) /*!< 0x00000040 */ - -#define TIM_CR2_TI1S_Pos (7U) -#define TIM_CR2_TI1S_Msk (0x1UL << TIM_CR2_TI1S_Pos) /*!< 0x00000080 */ -#define TIM_CR2_TI1S TIM_CR2_TI1S_Msk /*!<TI1 Selection */ - -/******************* Bit definition for TIM_SMCR register *******************/ -#define TIM_SMCR_SMS_Pos (0U) -#define TIM_SMCR_SMS_Msk (0x7UL << TIM_SMCR_SMS_Pos) /*!< 0x00000007 */ -#define TIM_SMCR_SMS TIM_SMCR_SMS_Msk /*!<SMS[2:0] bits (Slave mode selection) */ -#define TIM_SMCR_SMS_0 (0x1UL << TIM_SMCR_SMS_Pos) /*!< 0x00000001 */ -#define TIM_SMCR_SMS_1 (0x2UL << TIM_SMCR_SMS_Pos) /*!< 0x00000002 */ -#define TIM_SMCR_SMS_2 (0x4UL << TIM_SMCR_SMS_Pos) /*!< 0x00000004 */ - -#define TIM_SMCR_TS_Pos (4U) -#define TIM_SMCR_TS_Msk (0x7UL << TIM_SMCR_TS_Pos) /*!< 0x00000070 */ -#define TIM_SMCR_TS TIM_SMCR_TS_Msk /*!<TS[2:0] bits (Trigger selection) */ -#define TIM_SMCR_TS_0 (0x1UL << TIM_SMCR_TS_Pos) /*!< 0x00000010 */ -#define TIM_SMCR_TS_1 (0x2UL << TIM_SMCR_TS_Pos) /*!< 0x00000020 */ -#define TIM_SMCR_TS_2 (0x4UL << TIM_SMCR_TS_Pos) /*!< 0x00000040 */ - -#define TIM_SMCR_MSM_Pos (7U) -#define TIM_SMCR_MSM_Msk (0x1UL << TIM_SMCR_MSM_Pos) /*!< 0x00000080 */ -#define TIM_SMCR_MSM TIM_SMCR_MSM_Msk /*!<Master/slave mode */ - -#define TIM_SMCR_ETF_Pos (8U) -#define TIM_SMCR_ETF_Msk (0xFUL << TIM_SMCR_ETF_Pos) /*!< 0x00000F00 */ -#define TIM_SMCR_ETF TIM_SMCR_ETF_Msk /*!<ETF[3:0] bits (External trigger filter) */ -#define TIM_SMCR_ETF_0 (0x1UL << TIM_SMCR_ETF_Pos) /*!< 0x00000100 */ -#define TIM_SMCR_ETF_1 (0x2UL << TIM_SMCR_ETF_Pos) /*!< 0x00000200 */ -#define TIM_SMCR_ETF_2 (0x4UL << TIM_SMCR_ETF_Pos) /*!< 0x00000400 */ -#define TIM_SMCR_ETF_3 (0x8UL << TIM_SMCR_ETF_Pos) /*!< 0x00000800 */ - -#define TIM_SMCR_ETPS_Pos (12U) -#define TIM_SMCR_ETPS_Msk (0x3UL << TIM_SMCR_ETPS_Pos) /*!< 0x00003000 */ -#define TIM_SMCR_ETPS TIM_SMCR_ETPS_Msk /*!<ETPS[1:0] bits (External trigger prescaler) */ -#define TIM_SMCR_ETPS_0 (0x1UL << TIM_SMCR_ETPS_Pos) /*!< 0x00001000 */ -#define TIM_SMCR_ETPS_1 (0x2UL << TIM_SMCR_ETPS_Pos) /*!< 0x00002000 */ - -#define TIM_SMCR_ECE_Pos (14U) -#define TIM_SMCR_ECE_Msk (0x1UL << TIM_SMCR_ECE_Pos) /*!< 0x00004000 */ -#define TIM_SMCR_ECE TIM_SMCR_ECE_Msk /*!<External clock enable */ -#define TIM_SMCR_ETP_Pos (15U) -#define TIM_SMCR_ETP_Msk (0x1UL << TIM_SMCR_ETP_Pos) /*!< 0x00008000 */ -#define TIM_SMCR_ETP TIM_SMCR_ETP_Msk /*!<External trigger polarity */ - -/******************* Bit definition for TIM_DIER register *******************/ -#define TIM_DIER_UIE_Pos (0U) -#define TIM_DIER_UIE_Msk (0x1UL << TIM_DIER_UIE_Pos) /*!< 0x00000001 */ -#define TIM_DIER_UIE TIM_DIER_UIE_Msk /*!<Update interrupt enable */ -#define TIM_DIER_CC1IE_Pos (1U) -#define TIM_DIER_CC1IE_Msk (0x1UL << TIM_DIER_CC1IE_Pos) /*!< 0x00000002 */ -#define TIM_DIER_CC1IE TIM_DIER_CC1IE_Msk /*!<Capture/Compare 1 interrupt enable */ -#define TIM_DIER_CC2IE_Pos (2U) -#define TIM_DIER_CC2IE_Msk (0x1UL << TIM_DIER_CC2IE_Pos) /*!< 0x00000004 */ -#define TIM_DIER_CC2IE TIM_DIER_CC2IE_Msk /*!<Capture/Compare 2 interrupt enable */ -#define TIM_DIER_CC3IE_Pos (3U) -#define TIM_DIER_CC3IE_Msk (0x1UL << TIM_DIER_CC3IE_Pos) /*!< 0x00000008 */ -#define TIM_DIER_CC3IE TIM_DIER_CC3IE_Msk /*!<Capture/Compare 3 interrupt enable */ -#define TIM_DIER_CC4IE_Pos (4U) -#define TIM_DIER_CC4IE_Msk (0x1UL << TIM_DIER_CC4IE_Pos) /*!< 0x00000010 */ -#define TIM_DIER_CC4IE TIM_DIER_CC4IE_Msk /*!<Capture/Compare 4 interrupt enable */ -#define TIM_DIER_TIE_Pos (6U) -#define TIM_DIER_TIE_Msk (0x1UL << TIM_DIER_TIE_Pos) /*!< 0x00000040 */ -#define TIM_DIER_TIE TIM_DIER_TIE_Msk /*!<Trigger interrupt enable */ -#define TIM_DIER_UDE_Pos (8U) -#define TIM_DIER_UDE_Msk (0x1UL << TIM_DIER_UDE_Pos) /*!< 0x00000100 */ -#define TIM_DIER_UDE TIM_DIER_UDE_Msk /*!<Update DMA request enable */ -#define TIM_DIER_CC1DE_Pos (9U) -#define TIM_DIER_CC1DE_Msk (0x1UL << TIM_DIER_CC1DE_Pos) /*!< 0x00000200 */ -#define TIM_DIER_CC1DE TIM_DIER_CC1DE_Msk /*!<Capture/Compare 1 DMA request enable */ -#define TIM_DIER_CC2DE_Pos (10U) -#define TIM_DIER_CC2DE_Msk (0x1UL << TIM_DIER_CC2DE_Pos) /*!< 0x00000400 */ -#define TIM_DIER_CC2DE TIM_DIER_CC2DE_Msk /*!<Capture/Compare 2 DMA request enable */ -#define TIM_DIER_CC3DE_Pos (11U) -#define TIM_DIER_CC3DE_Msk (0x1UL << TIM_DIER_CC3DE_Pos) /*!< 0x00000800 */ -#define TIM_DIER_CC3DE TIM_DIER_CC3DE_Msk /*!<Capture/Compare 3 DMA request enable */ -#define TIM_DIER_CC4DE_Pos (12U) -#define TIM_DIER_CC4DE_Msk (0x1UL << TIM_DIER_CC4DE_Pos) /*!< 0x00001000 */ -#define TIM_DIER_CC4DE TIM_DIER_CC4DE_Msk /*!<Capture/Compare 4 DMA request enable */ -#define TIM_DIER_TDE_Pos (14U) -#define TIM_DIER_TDE_Msk (0x1UL << TIM_DIER_TDE_Pos) /*!< 0x00004000 */ -#define TIM_DIER_TDE TIM_DIER_TDE_Msk /*!<Trigger DMA request enable */ - -/******************** Bit definition for TIM_SR register ********************/ -#define TIM_SR_UIF_Pos (0U) -#define TIM_SR_UIF_Msk (0x1UL << TIM_SR_UIF_Pos) /*!< 0x00000001 */ -#define TIM_SR_UIF TIM_SR_UIF_Msk /*!<Update interrupt Flag */ -#define TIM_SR_CC1IF_Pos (1U) -#define TIM_SR_CC1IF_Msk (0x1UL << TIM_SR_CC1IF_Pos) /*!< 0x00000002 */ -#define TIM_SR_CC1IF TIM_SR_CC1IF_Msk /*!<Capture/Compare 1 interrupt Flag */ -#define TIM_SR_CC2IF_Pos (2U) -#define TIM_SR_CC2IF_Msk (0x1UL << TIM_SR_CC2IF_Pos) /*!< 0x00000004 */ -#define TIM_SR_CC2IF TIM_SR_CC2IF_Msk /*!<Capture/Compare 2 interrupt Flag */ -#define TIM_SR_CC3IF_Pos (3U) -#define TIM_SR_CC3IF_Msk (0x1UL << TIM_SR_CC3IF_Pos) /*!< 0x00000008 */ -#define TIM_SR_CC3IF TIM_SR_CC3IF_Msk /*!<Capture/Compare 3 interrupt Flag */ -#define TIM_SR_CC4IF_Pos (4U) -#define TIM_SR_CC4IF_Msk (0x1UL << TIM_SR_CC4IF_Pos) /*!< 0x00000010 */ -#define TIM_SR_CC4IF TIM_SR_CC4IF_Msk /*!<Capture/Compare 4 interrupt Flag */ -#define TIM_SR_TIF_Pos (6U) -#define TIM_SR_TIF_Msk (0x1UL << TIM_SR_TIF_Pos) /*!< 0x00000040 */ -#define TIM_SR_TIF TIM_SR_TIF_Msk /*!<Trigger interrupt Flag */ -#define TIM_SR_CC1OF_Pos (9U) -#define TIM_SR_CC1OF_Msk (0x1UL << TIM_SR_CC1OF_Pos) /*!< 0x00000200 */ -#define TIM_SR_CC1OF TIM_SR_CC1OF_Msk /*!<Capture/Compare 1 Overcapture Flag */ -#define TIM_SR_CC2OF_Pos (10U) -#define TIM_SR_CC2OF_Msk (0x1UL << TIM_SR_CC2OF_Pos) /*!< 0x00000400 */ -#define TIM_SR_CC2OF TIM_SR_CC2OF_Msk /*!<Capture/Compare 2 Overcapture Flag */ -#define TIM_SR_CC3OF_Pos (11U) -#define TIM_SR_CC3OF_Msk (0x1UL << TIM_SR_CC3OF_Pos) /*!< 0x00000800 */ -#define TIM_SR_CC3OF TIM_SR_CC3OF_Msk /*!<Capture/Compare 3 Overcapture Flag */ -#define TIM_SR_CC4OF_Pos (12U) -#define TIM_SR_CC4OF_Msk (0x1UL << TIM_SR_CC4OF_Pos) /*!< 0x00001000 */ -#define TIM_SR_CC4OF TIM_SR_CC4OF_Msk /*!<Capture/Compare 4 Overcapture Flag */ - -/******************* Bit definition for TIM_EGR register ********************/ -#define TIM_EGR_UG_Pos (0U) -#define TIM_EGR_UG_Msk (0x1UL << TIM_EGR_UG_Pos) /*!< 0x00000001 */ -#define TIM_EGR_UG TIM_EGR_UG_Msk /*!<Update Generation */ -#define TIM_EGR_CC1G_Pos (1U) -#define TIM_EGR_CC1G_Msk (0x1UL << TIM_EGR_CC1G_Pos) /*!< 0x00000002 */ -#define TIM_EGR_CC1G TIM_EGR_CC1G_Msk /*!<Capture/Compare 1 Generation */ -#define TIM_EGR_CC2G_Pos (2U) -#define TIM_EGR_CC2G_Msk (0x1UL << TIM_EGR_CC2G_Pos) /*!< 0x00000004 */ -#define TIM_EGR_CC2G TIM_EGR_CC2G_Msk /*!<Capture/Compare 2 Generation */ -#define TIM_EGR_CC3G_Pos (3U) -#define TIM_EGR_CC3G_Msk (0x1UL << TIM_EGR_CC3G_Pos) /*!< 0x00000008 */ -#define TIM_EGR_CC3G TIM_EGR_CC3G_Msk /*!<Capture/Compare 3 Generation */ -#define TIM_EGR_CC4G_Pos (4U) -#define TIM_EGR_CC4G_Msk (0x1UL << TIM_EGR_CC4G_Pos) /*!< 0x00000010 */ -#define TIM_EGR_CC4G TIM_EGR_CC4G_Msk /*!<Capture/Compare 4 Generation */ -#define TIM_EGR_TG_Pos (6U) -#define TIM_EGR_TG_Msk (0x1UL << TIM_EGR_TG_Pos) /*!< 0x00000040 */ -#define TIM_EGR_TG TIM_EGR_TG_Msk /*!<Trigger Generation */ - -/****************** Bit definition for TIM_CCMR1 register *******************/ -#define TIM_CCMR1_CC1S_Pos (0U) -#define TIM_CCMR1_CC1S_Msk (0x3UL << TIM_CCMR1_CC1S_Pos) /*!< 0x00000003 */ -#define TIM_CCMR1_CC1S TIM_CCMR1_CC1S_Msk /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */ -#define TIM_CCMR1_CC1S_0 (0x1UL << TIM_CCMR1_CC1S_Pos) /*!< 0x00000001 */ -#define TIM_CCMR1_CC1S_1 (0x2UL << TIM_CCMR1_CC1S_Pos) /*!< 0x00000002 */ - -#define TIM_CCMR1_OC1FE_Pos (2U) -#define TIM_CCMR1_OC1FE_Msk (0x1UL << TIM_CCMR1_OC1FE_Pos) /*!< 0x00000004 */ -#define TIM_CCMR1_OC1FE TIM_CCMR1_OC1FE_Msk /*!<Output Compare 1 Fast enable */ -#define TIM_CCMR1_OC1PE_Pos (3U) -#define TIM_CCMR1_OC1PE_Msk (0x1UL << TIM_CCMR1_OC1PE_Pos) /*!< 0x00000008 */ -#define TIM_CCMR1_OC1PE TIM_CCMR1_OC1PE_Msk /*!<Output Compare 1 Preload enable */ - -#define TIM_CCMR1_OC1M_Pos (4U) -#define TIM_CCMR1_OC1M_Msk (0x7UL << TIM_CCMR1_OC1M_Pos) /*!< 0x00000070 */ -#define TIM_CCMR1_OC1M TIM_CCMR1_OC1M_Msk /*!<OC1M[2:0] bits (Output Compare 1 Mode) */ -#define TIM_CCMR1_OC1M_0 (0x1UL << TIM_CCMR1_OC1M_Pos) /*!< 0x00000010 */ -#define TIM_CCMR1_OC1M_1 (0x2UL << TIM_CCMR1_OC1M_Pos) /*!< 0x00000020 */ -#define TIM_CCMR1_OC1M_2 (0x4UL << TIM_CCMR1_OC1M_Pos) /*!< 0x00000040 */ - -#define TIM_CCMR1_OC1CE_Pos (7U) -#define TIM_CCMR1_OC1CE_Msk (0x1UL << TIM_CCMR1_OC1CE_Pos) /*!< 0x00000080 */ -#define TIM_CCMR1_OC1CE TIM_CCMR1_OC1CE_Msk /*!<Output Compare 1Clear Enable */ - -#define TIM_CCMR1_CC2S_Pos (8U) -#define TIM_CCMR1_CC2S_Msk (0x3UL << TIM_CCMR1_CC2S_Pos) /*!< 0x00000300 */ -#define TIM_CCMR1_CC2S TIM_CCMR1_CC2S_Msk /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */ -#define TIM_CCMR1_CC2S_0 (0x1UL << TIM_CCMR1_CC2S_Pos) /*!< 0x00000100 */ -#define TIM_CCMR1_CC2S_1 (0x2UL << TIM_CCMR1_CC2S_Pos) /*!< 0x00000200 */ - -#define TIM_CCMR1_OC2FE_Pos (10U) -#define TIM_CCMR1_OC2FE_Msk (0x1UL << TIM_CCMR1_OC2FE_Pos) /*!< 0x00000400 */ -#define TIM_CCMR1_OC2FE TIM_CCMR1_OC2FE_Msk /*!<Output Compare 2 Fast enable */ -#define TIM_CCMR1_OC2PE_Pos (11U) -#define TIM_CCMR1_OC2PE_Msk (0x1UL << TIM_CCMR1_OC2PE_Pos) /*!< 0x00000800 */ -#define TIM_CCMR1_OC2PE TIM_CCMR1_OC2PE_Msk /*!<Output Compare 2 Preload enable */ - -#define TIM_CCMR1_OC2M_Pos (12U) -#define TIM_CCMR1_OC2M_Msk (0x7UL << TIM_CCMR1_OC2M_Pos) /*!< 0x00007000 */ -#define TIM_CCMR1_OC2M TIM_CCMR1_OC2M_Msk /*!<OC2M[2:0] bits (Output Compare 2 Mode) */ -#define TIM_CCMR1_OC2M_0 (0x1UL << TIM_CCMR1_OC2M_Pos) /*!< 0x00001000 */ -#define TIM_CCMR1_OC2M_1 (0x2UL << TIM_CCMR1_OC2M_Pos) /*!< 0x00002000 */ -#define TIM_CCMR1_OC2M_2 (0x4UL << TIM_CCMR1_OC2M_Pos) /*!< 0x00004000 */ - -#define TIM_CCMR1_OC2CE_Pos (15U) -#define TIM_CCMR1_OC2CE_Msk (0x1UL << TIM_CCMR1_OC2CE_Pos) /*!< 0x00008000 */ -#define TIM_CCMR1_OC2CE TIM_CCMR1_OC2CE_Msk /*!<Output Compare 2 Clear Enable */ - -/*----------------------------------------------------------------------------*/ - -#define TIM_CCMR1_IC1PSC_Pos (2U) -#define TIM_CCMR1_IC1PSC_Msk (0x3UL << TIM_CCMR1_IC1PSC_Pos) /*!< 0x0000000C */ -#define TIM_CCMR1_IC1PSC TIM_CCMR1_IC1PSC_Msk /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ -#define TIM_CCMR1_IC1PSC_0 (0x1UL << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000004 */ -#define TIM_CCMR1_IC1PSC_1 (0x2UL << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000008 */ - -#define TIM_CCMR1_IC1F_Pos (4U) -#define TIM_CCMR1_IC1F_Msk (0xFUL << TIM_CCMR1_IC1F_Pos) /*!< 0x000000F0 */ -#define TIM_CCMR1_IC1F TIM_CCMR1_IC1F_Msk /*!<IC1F[3:0] bits (Input Capture 1 Filter) */ -#define TIM_CCMR1_IC1F_0 (0x1UL << TIM_CCMR1_IC1F_Pos) /*!< 0x00000010 */ -#define TIM_CCMR1_IC1F_1 (0x2UL << TIM_CCMR1_IC1F_Pos) /*!< 0x00000020 */ -#define TIM_CCMR1_IC1F_2 (0x4UL << TIM_CCMR1_IC1F_Pos) /*!< 0x00000040 */ -#define TIM_CCMR1_IC1F_3 (0x8UL << TIM_CCMR1_IC1F_Pos) /*!< 0x00000080 */ - -#define TIM_CCMR1_IC2PSC_Pos (10U) -#define TIM_CCMR1_IC2PSC_Msk (0x3UL << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000C00 */ -#define TIM_CCMR1_IC2PSC TIM_CCMR1_IC2PSC_Msk /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ -#define TIM_CCMR1_IC2PSC_0 (0x1UL << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000400 */ -#define TIM_CCMR1_IC2PSC_1 (0x2UL << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000800 */ - -#define TIM_CCMR1_IC2F_Pos (12U) -#define TIM_CCMR1_IC2F_Msk (0xFUL << TIM_CCMR1_IC2F_Pos) /*!< 0x0000F000 */ -#define TIM_CCMR1_IC2F TIM_CCMR1_IC2F_Msk /*!<IC2F[3:0] bits (Input Capture 2 Filter) */ -#define TIM_CCMR1_IC2F_0 (0x1UL << TIM_CCMR1_IC2F_Pos) /*!< 0x00001000 */ -#define TIM_CCMR1_IC2F_1 (0x2UL << TIM_CCMR1_IC2F_Pos) /*!< 0x00002000 */ -#define TIM_CCMR1_IC2F_2 (0x4UL << TIM_CCMR1_IC2F_Pos) /*!< 0x00004000 */ -#define TIM_CCMR1_IC2F_3 (0x8UL << TIM_CCMR1_IC2F_Pos) /*!< 0x00008000 */ - -/****************** Bit definition for TIM_CCMR2 register *******************/ -#define TIM_CCMR2_CC3S_Pos (0U) -#define TIM_CCMR2_CC3S_Msk (0x3UL << TIM_CCMR2_CC3S_Pos) /*!< 0x00000003 */ -#define TIM_CCMR2_CC3S TIM_CCMR2_CC3S_Msk /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */ -#define TIM_CCMR2_CC3S_0 (0x1UL << TIM_CCMR2_CC3S_Pos) /*!< 0x00000001 */ -#define TIM_CCMR2_CC3S_1 (0x2UL << TIM_CCMR2_CC3S_Pos) /*!< 0x00000002 */ - -#define TIM_CCMR2_OC3FE_Pos (2U) -#define TIM_CCMR2_OC3FE_Msk (0x1UL << TIM_CCMR2_OC3FE_Pos) /*!< 0x00000004 */ -#define TIM_CCMR2_OC3FE TIM_CCMR2_OC3FE_Msk /*!<Output Compare 3 Fast enable */ -#define TIM_CCMR2_OC3PE_Pos (3U) -#define TIM_CCMR2_OC3PE_Msk (0x1UL << TIM_CCMR2_OC3PE_Pos) /*!< 0x00000008 */ -#define TIM_CCMR2_OC3PE TIM_CCMR2_OC3PE_Msk /*!<Output Compare 3 Preload enable */ - -#define TIM_CCMR2_OC3M_Pos (4U) -#define TIM_CCMR2_OC3M_Msk (0x7UL << TIM_CCMR2_OC3M_Pos) /*!< 0x00000070 */ -#define TIM_CCMR2_OC3M TIM_CCMR2_OC3M_Msk /*!<OC3M[2:0] bits (Output Compare 3 Mode) */ -#define TIM_CCMR2_OC3M_0 (0x1UL << TIM_CCMR2_OC3M_Pos) /*!< 0x00000010 */ -#define TIM_CCMR2_OC3M_1 (0x2UL << TIM_CCMR2_OC3M_Pos) /*!< 0x00000020 */ -#define TIM_CCMR2_OC3M_2 (0x4UL << TIM_CCMR2_OC3M_Pos) /*!< 0x00000040 */ - -#define TIM_CCMR2_OC3CE_Pos (7U) -#define TIM_CCMR2_OC3CE_Msk (0x1UL << TIM_CCMR2_OC3CE_Pos) /*!< 0x00000080 */ -#define TIM_CCMR2_OC3CE TIM_CCMR2_OC3CE_Msk /*!<Output Compare 3 Clear Enable */ - -#define TIM_CCMR2_CC4S_Pos (8U) -#define TIM_CCMR2_CC4S_Msk (0x3UL << TIM_CCMR2_CC4S_Pos) /*!< 0x00000300 */ -#define TIM_CCMR2_CC4S TIM_CCMR2_CC4S_Msk /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */ -#define TIM_CCMR2_CC4S_0 (0x1UL << TIM_CCMR2_CC4S_Pos) /*!< 0x00000100 */ -#define TIM_CCMR2_CC4S_1 (0x2UL << TIM_CCMR2_CC4S_Pos) /*!< 0x00000200 */ - -#define TIM_CCMR2_OC4FE_Pos (10U) -#define TIM_CCMR2_OC4FE_Msk (0x1UL << TIM_CCMR2_OC4FE_Pos) /*!< 0x00000400 */ -#define TIM_CCMR2_OC4FE TIM_CCMR2_OC4FE_Msk /*!<Output Compare 4 Fast enable */ -#define TIM_CCMR2_OC4PE_Pos (11U) -#define TIM_CCMR2_OC4PE_Msk (0x1UL << TIM_CCMR2_OC4PE_Pos) /*!< 0x00000800 */ -#define TIM_CCMR2_OC4PE TIM_CCMR2_OC4PE_Msk /*!<Output Compare 4 Preload enable */ - -#define TIM_CCMR2_OC4M_Pos (12U) -#define TIM_CCMR2_OC4M_Msk (0x7UL << TIM_CCMR2_OC4M_Pos) /*!< 0x00007000 */ -#define TIM_CCMR2_OC4M TIM_CCMR2_OC4M_Msk /*!<OC4M[2:0] bits (Output Compare 4 Mode) */ -#define TIM_CCMR2_OC4M_0 (0x1UL << TIM_CCMR2_OC4M_Pos) /*!< 0x00001000 */ -#define TIM_CCMR2_OC4M_1 (0x2UL << TIM_CCMR2_OC4M_Pos) /*!< 0x00002000 */ -#define TIM_CCMR2_OC4M_2 (0x4UL << TIM_CCMR2_OC4M_Pos) /*!< 0x00004000 */ - -#define TIM_CCMR2_OC4CE_Pos (15U) -#define TIM_CCMR2_OC4CE_Msk (0x1UL << TIM_CCMR2_OC4CE_Pos) /*!< 0x00008000 */ -#define TIM_CCMR2_OC4CE TIM_CCMR2_OC4CE_Msk /*!<Output Compare 4 Clear Enable */ - -/*----------------------------------------------------------------------------*/ - -#define TIM_CCMR2_IC3PSC_Pos (2U) -#define TIM_CCMR2_IC3PSC_Msk (0x3UL << TIM_CCMR2_IC3PSC_Pos) /*!< 0x0000000C */ -#define TIM_CCMR2_IC3PSC TIM_CCMR2_IC3PSC_Msk /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ -#define TIM_CCMR2_IC3PSC_0 (0x1UL << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000004 */ -#define TIM_CCMR2_IC3PSC_1 (0x2UL << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000008 */ - -#define TIM_CCMR2_IC3F_Pos (4U) -#define TIM_CCMR2_IC3F_Msk (0xFUL << TIM_CCMR2_IC3F_Pos) /*!< 0x000000F0 */ -#define TIM_CCMR2_IC3F TIM_CCMR2_IC3F_Msk /*!<IC3F[3:0] bits (Input Capture 3 Filter) */ -#define TIM_CCMR2_IC3F_0 (0x1UL << TIM_CCMR2_IC3F_Pos) /*!< 0x00000010 */ -#define TIM_CCMR2_IC3F_1 (0x2UL << TIM_CCMR2_IC3F_Pos) /*!< 0x00000020 */ -#define TIM_CCMR2_IC3F_2 (0x4UL << TIM_CCMR2_IC3F_Pos) /*!< 0x00000040 */ -#define TIM_CCMR2_IC3F_3 (0x8UL << TIM_CCMR2_IC3F_Pos) /*!< 0x00000080 */ - -#define TIM_CCMR2_IC4PSC_Pos (10U) -#define TIM_CCMR2_IC4PSC_Msk (0x3UL << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000C00 */ -#define TIM_CCMR2_IC4PSC TIM_CCMR2_IC4PSC_Msk /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ -#define TIM_CCMR2_IC4PSC_0 (0x1UL << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000400 */ -#define TIM_CCMR2_IC4PSC_1 (0x2UL << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000800 */ - -#define TIM_CCMR2_IC4F_Pos (12U) -#define TIM_CCMR2_IC4F_Msk (0xFUL << TIM_CCMR2_IC4F_Pos) /*!< 0x0000F000 */ -#define TIM_CCMR2_IC4F TIM_CCMR2_IC4F_Msk /*!<IC4F[3:0] bits (Input Capture 4 Filter) */ -#define TIM_CCMR2_IC4F_0 (0x1UL << TIM_CCMR2_IC4F_Pos) /*!< 0x00001000 */ -#define TIM_CCMR2_IC4F_1 (0x2UL << TIM_CCMR2_IC4F_Pos) /*!< 0x00002000 */ -#define TIM_CCMR2_IC4F_2 (0x4UL << TIM_CCMR2_IC4F_Pos) /*!< 0x00004000 */ -#define TIM_CCMR2_IC4F_3 (0x8UL << TIM_CCMR2_IC4F_Pos) /*!< 0x00008000 */ - -/******************* Bit definition for TIM_CCER register *******************/ -#define TIM_CCER_CC1E_Pos (0U) -#define TIM_CCER_CC1E_Msk (0x1UL << TIM_CCER_CC1E_Pos) /*!< 0x00000001 */ -#define TIM_CCER_CC1E TIM_CCER_CC1E_Msk /*!<Capture/Compare 1 output enable */ -#define TIM_CCER_CC1P_Pos (1U) -#define TIM_CCER_CC1P_Msk (0x1UL << TIM_CCER_CC1P_Pos) /*!< 0x00000002 */ -#define TIM_CCER_CC1P TIM_CCER_CC1P_Msk /*!<Capture/Compare 1 output Polarity */ -#define TIM_CCER_CC1NP_Pos (3U) -#define TIM_CCER_CC1NP_Msk (0x1UL << TIM_CCER_CC1NP_Pos) /*!< 0x00000008 */ -#define TIM_CCER_CC1NP TIM_CCER_CC1NP_Msk /*!<Capture/Compare 1 Complementary output Polarity */ -#define TIM_CCER_CC2E_Pos (4U) -#define TIM_CCER_CC2E_Msk (0x1UL << TIM_CCER_CC2E_Pos) /*!< 0x00000010 */ -#define TIM_CCER_CC2E TIM_CCER_CC2E_Msk /*!<Capture/Compare 2 output enable */ -#define TIM_CCER_CC2P_Pos (5U) -#define TIM_CCER_CC2P_Msk (0x1UL << TIM_CCER_CC2P_Pos) /*!< 0x00000020 */ -#define TIM_CCER_CC2P TIM_CCER_CC2P_Msk /*!<Capture/Compare 2 output Polarity */ -#define TIM_CCER_CC2NP_Pos (7U) -#define TIM_CCER_CC2NP_Msk (0x1UL << TIM_CCER_CC2NP_Pos) /*!< 0x00000080 */ -#define TIM_CCER_CC2NP TIM_CCER_CC2NP_Msk /*!<Capture/Compare 2 Complementary output Polarity */ -#define TIM_CCER_CC3E_Pos (8U) -#define TIM_CCER_CC3E_Msk (0x1UL << TIM_CCER_CC3E_Pos) /*!< 0x00000100 */ -#define TIM_CCER_CC3E TIM_CCER_CC3E_Msk /*!<Capture/Compare 3 output enable */ -#define TIM_CCER_CC3P_Pos (9U) -#define TIM_CCER_CC3P_Msk (0x1UL << TIM_CCER_CC3P_Pos) /*!< 0x00000200 */ -#define TIM_CCER_CC3P TIM_CCER_CC3P_Msk /*!<Capture/Compare 3 output Polarity */ -#define TIM_CCER_CC3NP_Pos (11U) -#define TIM_CCER_CC3NP_Msk (0x1UL << TIM_CCER_CC3NP_Pos) /*!< 0x00000800 */ -#define TIM_CCER_CC3NP TIM_CCER_CC3NP_Msk /*!<Capture/Compare 3 Complementary output Polarity */ -#define TIM_CCER_CC4E_Pos (12U) -#define TIM_CCER_CC4E_Msk (0x1UL << TIM_CCER_CC4E_Pos) /*!< 0x00001000 */ -#define TIM_CCER_CC4E TIM_CCER_CC4E_Msk /*!<Capture/Compare 4 output enable */ -#define TIM_CCER_CC4P_Pos (13U) -#define TIM_CCER_CC4P_Msk (0x1UL << TIM_CCER_CC4P_Pos) /*!< 0x00002000 */ -#define TIM_CCER_CC4P TIM_CCER_CC4P_Msk /*!<Capture/Compare 4 output Polarity */ -#define TIM_CCER_CC4NP_Pos (15U) -#define TIM_CCER_CC4NP_Msk (0x1UL << TIM_CCER_CC4NP_Pos) /*!< 0x00008000 */ -#define TIM_CCER_CC4NP TIM_CCER_CC4NP_Msk /*!<Capture/Compare 4 Complementary output Polarity */ - -/******************* Bit definition for TIM_CNT register ********************/ -#define TIM_CNT_CNT_Pos (0U) -#define TIM_CNT_CNT_Msk (0xFFFFUL << TIM_CNT_CNT_Pos) /*!< 0x0000FFFF */ -#define TIM_CNT_CNT TIM_CNT_CNT_Msk /*!<Counter Value */ - -/******************* Bit definition for TIM_PSC register ********************/ -#define TIM_PSC_PSC_Pos (0U) -#define TIM_PSC_PSC_Msk (0xFFFFUL << TIM_PSC_PSC_Pos) /*!< 0x0000FFFF */ -#define TIM_PSC_PSC TIM_PSC_PSC_Msk /*!<Prescaler Value */ - -/******************* Bit definition for TIM_ARR register ********************/ -#define TIM_ARR_ARR_Pos (0U) -#define TIM_ARR_ARR_Msk (0xFFFFUL << TIM_ARR_ARR_Pos) /*!< 0x0000FFFF */ -#define TIM_ARR_ARR TIM_ARR_ARR_Msk /*!<actual auto-reload Value */ - -/******************* Bit definition for TIM_CCR1 register *******************/ -#define TIM_CCR1_CCR1_Pos (0U) -#define TIM_CCR1_CCR1_Msk (0xFFFFUL << TIM_CCR1_CCR1_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR1_CCR1 TIM_CCR1_CCR1_Msk /*!<Capture/Compare 1 Value */ - -/******************* Bit definition for TIM_CCR2 register *******************/ -#define TIM_CCR2_CCR2_Pos (0U) -#define TIM_CCR2_CCR2_Msk (0xFFFFUL << TIM_CCR2_CCR2_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR2_CCR2 TIM_CCR2_CCR2_Msk /*!<Capture/Compare 2 Value */ - -/******************* Bit definition for TIM_CCR3 register *******************/ -#define TIM_CCR3_CCR3_Pos (0U) -#define TIM_CCR3_CCR3_Msk (0xFFFFUL << TIM_CCR3_CCR3_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR3_CCR3 TIM_CCR3_CCR3_Msk /*!<Capture/Compare 3 Value */ - -/******************* Bit definition for TIM_CCR4 register *******************/ -#define TIM_CCR4_CCR4_Pos (0U) -#define TIM_CCR4_CCR4_Msk (0xFFFFUL << TIM_CCR4_CCR4_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR4_CCR4 TIM_CCR4_CCR4_Msk /*!<Capture/Compare 4 Value */ - -/******************* Bit definition for TIM_DCR register ********************/ -#define TIM_DCR_DBA_Pos (0U) -#define TIM_DCR_DBA_Msk (0x1FUL << TIM_DCR_DBA_Pos) /*!< 0x0000001F */ -#define TIM_DCR_DBA TIM_DCR_DBA_Msk /*!<DBA[4:0] bits (DMA Base Address) */ -#define TIM_DCR_DBA_0 (0x01UL << TIM_DCR_DBA_Pos) /*!< 0x00000001 */ -#define TIM_DCR_DBA_1 (0x02UL << TIM_DCR_DBA_Pos) /*!< 0x00000002 */ -#define TIM_DCR_DBA_2 (0x04UL << TIM_DCR_DBA_Pos) /*!< 0x00000004 */ -#define TIM_DCR_DBA_3 (0x08UL << TIM_DCR_DBA_Pos) /*!< 0x00000008 */ -#define TIM_DCR_DBA_4 (0x10UL << TIM_DCR_DBA_Pos) /*!< 0x00000010 */ - -#define TIM_DCR_DBL_Pos (8U) -#define TIM_DCR_DBL_Msk (0x1FUL << TIM_DCR_DBL_Pos) /*!< 0x00001F00 */ -#define TIM_DCR_DBL TIM_DCR_DBL_Msk /*!<DBL[4:0] bits (DMA Burst Length) */ -#define TIM_DCR_DBL_0 (0x01UL << TIM_DCR_DBL_Pos) /*!< 0x00000100 */ -#define TIM_DCR_DBL_1 (0x02UL << TIM_DCR_DBL_Pos) /*!< 0x00000200 */ -#define TIM_DCR_DBL_2 (0x04UL << TIM_DCR_DBL_Pos) /*!< 0x00000400 */ -#define TIM_DCR_DBL_3 (0x08UL << TIM_DCR_DBL_Pos) /*!< 0x00000800 */ -#define TIM_DCR_DBL_4 (0x10UL << TIM_DCR_DBL_Pos) /*!< 0x00001000 */ - -/******************* Bit definition for TIM_DMAR register *******************/ -#define TIM_DMAR_DMAB_Pos (0U) -#define TIM_DMAR_DMAB_Msk (0xFFFFUL << TIM_DMAR_DMAB_Pos) /*!< 0x0000FFFF */ -#define TIM_DMAR_DMAB TIM_DMAR_DMAB_Msk /*!<DMA register for burst accesses */ - -/******************* Bit definition for TIM_OR register *********************/ -#define TIM2_OR_ETR_RMP_Pos (0U) -#define TIM2_OR_ETR_RMP_Msk (0x7UL << TIM2_OR_ETR_RMP_Pos) /*!< 0x00000007 */ -#define TIM2_OR_ETR_RMP TIM2_OR_ETR_RMP_Msk /*!<ETR_RMP[1:0] bits (TIM2 ETR remap) */ -#define TIM2_OR_ETR_RMP_0 (0x1UL << TIM2_OR_ETR_RMP_Pos) /*!< 0x00000001 */ -#define TIM2_OR_ETR_RMP_1 (0x2UL << TIM2_OR_ETR_RMP_Pos) /*!< 0x00000002 */ -#define TIM2_OR_ETR_RMP_2 (0x4UL << TIM2_OR_ETR_RMP_Pos) /*!< 0x00000004 */ -#define TIM2_OR_TI4_RMP_Pos (3U) -#define TIM2_OR_TI4_RMP_Msk (0x3UL << TIM2_OR_TI4_RMP_Pos) /*!< 0x00000018 */ -#define TIM2_OR_TI4_RMP TIM2_OR_TI4_RMP_Msk /*!<TI4_RMP[1:0] bits (TIM2 Input 4 remap) */ -#define TIM2_OR_TI4_RMP_0 (0x1UL << TIM2_OR_TI4_RMP_Pos) /*!< 0x00000008 */ -#define TIM2_OR_TI4_RMP_1 (0x2UL << TIM2_OR_TI4_RMP_Pos) /*!< 0x00000010 */ - -#define TIM21_OR_ETR_RMP_Pos (0U) -#define TIM21_OR_ETR_RMP_Msk (0x3UL << TIM21_OR_ETR_RMP_Pos) /*!< 0x00000003 */ -#define TIM21_OR_ETR_RMP TIM21_OR_ETR_RMP_Msk /*!<ETR_RMP[1:0] bits (TIM21 ETR remap) */ -#define TIM21_OR_ETR_RMP_0 (0x1UL << TIM21_OR_ETR_RMP_Pos) /*!< 0x00000001 */ -#define TIM21_OR_ETR_RMP_1 (0x2UL << TIM21_OR_ETR_RMP_Pos) /*!< 0x00000002 */ -#define TIM21_OR_TI1_RMP_Pos (2U) -#define TIM21_OR_TI1_RMP_Msk (0x7UL << TIM21_OR_TI1_RMP_Pos) /*!< 0x0000001C */ -#define TIM21_OR_TI1_RMP TIM21_OR_TI1_RMP_Msk /*!<TI1_RMP[2:0] bits (TIM21 Input 1 remap) */ -#define TIM21_OR_TI1_RMP_0 (0x1UL << TIM21_OR_TI1_RMP_Pos) /*!< 0x00000004 */ -#define TIM21_OR_TI1_RMP_1 (0x2UL << TIM21_OR_TI1_RMP_Pos) /*!< 0x00000008 */ -#define TIM21_OR_TI1_RMP_2 (0x4UL << TIM21_OR_TI1_RMP_Pos) /*!< 0x00000010 */ -#define TIM21_OR_TI2_RMP_Pos (5U) -#define TIM21_OR_TI2_RMP_Msk (0x1UL << TIM21_OR_TI2_RMP_Pos) /*!< 0x00000020 */ -#define TIM21_OR_TI2_RMP TIM21_OR_TI2_RMP_Msk /*!<TI2_RMP bit (TIM21 Input 2 remap) */ - -#define TIM22_OR_ETR_RMP_Pos (0U) -#define TIM22_OR_ETR_RMP_Msk (0x3UL << TIM22_OR_ETR_RMP_Pos) /*!< 0x00000003 */ -#define TIM22_OR_ETR_RMP TIM22_OR_ETR_RMP_Msk /*!<ETR_RMP[1:0] bits (TIM22 ETR remap) */ -#define TIM22_OR_ETR_RMP_0 (0x1UL << TIM22_OR_ETR_RMP_Pos) /*!< 0x00000001 */ -#define TIM22_OR_ETR_RMP_1 (0x2UL << TIM22_OR_ETR_RMP_Pos) /*!< 0x00000002 */ -#define TIM22_OR_TI1_RMP_Pos (2U) -#define TIM22_OR_TI1_RMP_Msk (0x3UL << TIM22_OR_TI1_RMP_Pos) /*!< 0x0000000C */ -#define TIM22_OR_TI1_RMP TIM22_OR_TI1_RMP_Msk /*!<TI1_RMP[2:0] bits (TIM22 Input 1 remap) */ -#define TIM22_OR_TI1_RMP_0 (0x1UL << TIM22_OR_TI1_RMP_Pos) /*!< 0x00000004 */ -#define TIM22_OR_TI1_RMP_1 (0x2UL << TIM22_OR_TI1_RMP_Pos) /*!< 0x00000008 */ - - -/******************************************************************************/ -/* */ -/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */ -/* */ -/******************************************************************************/ - -/* - * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) - */ -/* Note: No specific macro feature on this device */ - -/****************** Bit definition for USART_CR1 register *******************/ -#define USART_CR1_UE_Pos (0U) -#define USART_CR1_UE_Msk (0x1UL << USART_CR1_UE_Pos) /*!< 0x00000001 */ -#define USART_CR1_UE USART_CR1_UE_Msk /*!< USART Enable */ -#define USART_CR1_UESM_Pos (1U) -#define USART_CR1_UESM_Msk (0x1UL << USART_CR1_UESM_Pos) /*!< 0x00000002 */ -#define USART_CR1_UESM USART_CR1_UESM_Msk /*!< USART Enable in STOP Mode */ -#define USART_CR1_RE_Pos (2U) -#define USART_CR1_RE_Msk (0x1UL << USART_CR1_RE_Pos) /*!< 0x00000004 */ -#define USART_CR1_RE USART_CR1_RE_Msk /*!< Receiver Enable */ -#define USART_CR1_TE_Pos (3U) -#define USART_CR1_TE_Msk (0x1UL << USART_CR1_TE_Pos) /*!< 0x00000008 */ -#define USART_CR1_TE USART_CR1_TE_Msk /*!< Transmitter Enable */ -#define USART_CR1_IDLEIE_Pos (4U) -#define USART_CR1_IDLEIE_Msk (0x1UL << USART_CR1_IDLEIE_Pos) /*!< 0x00000010 */ -#define USART_CR1_IDLEIE USART_CR1_IDLEIE_Msk /*!< IDLE Interrupt Enable */ -#define USART_CR1_RXNEIE_Pos (5U) -#define USART_CR1_RXNEIE_Msk (0x1UL << USART_CR1_RXNEIE_Pos) /*!< 0x00000020 */ -#define USART_CR1_RXNEIE USART_CR1_RXNEIE_Msk /*!< RXNE Interrupt Enable */ -#define USART_CR1_TCIE_Pos (6U) -#define USART_CR1_TCIE_Msk (0x1UL << USART_CR1_TCIE_Pos) /*!< 0x00000040 */ -#define USART_CR1_TCIE USART_CR1_TCIE_Msk /*!< Transmission Complete Interrupt Enable */ -#define USART_CR1_TXEIE_Pos (7U) -#define USART_CR1_TXEIE_Msk (0x1UL << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */ -#define USART_CR1_TXEIE USART_CR1_TXEIE_Msk /*!< TXE Interrupt Enable */ -#define USART_CR1_PEIE_Pos (8U) -#define USART_CR1_PEIE_Msk (0x1UL << USART_CR1_PEIE_Pos) /*!< 0x00000100 */ -#define USART_CR1_PEIE USART_CR1_PEIE_Msk /*!< PE Interrupt Enable */ -#define USART_CR1_PS_Pos (9U) -#define USART_CR1_PS_Msk (0x1UL << USART_CR1_PS_Pos) /*!< 0x00000200 */ -#define USART_CR1_PS USART_CR1_PS_Msk /*!< Parity Selection */ -#define USART_CR1_PCE_Pos (10U) -#define USART_CR1_PCE_Msk (0x1UL << USART_CR1_PCE_Pos) /*!< 0x00000400 */ -#define USART_CR1_PCE USART_CR1_PCE_Msk /*!< Parity Control Enable */ -#define USART_CR1_WAKE_Pos (11U) -#define USART_CR1_WAKE_Msk (0x1UL << USART_CR1_WAKE_Pos) /*!< 0x00000800 */ -#define USART_CR1_WAKE USART_CR1_WAKE_Msk /*!< Receiver Wakeup method */ -#define USART_CR1_M_Pos (12U) -#define USART_CR1_M_Msk (0x10001UL << USART_CR1_M_Pos) /*!< 0x10001000 */ -#define USART_CR1_M USART_CR1_M_Msk /*!< Word length */ -#define USART_CR1_M0_Pos (12U) -#define USART_CR1_M0_Msk (0x1UL << USART_CR1_M0_Pos) /*!< 0x00001000 */ -#define USART_CR1_M0 USART_CR1_M0_Msk /*!< Word length - Bit 0 */ -#define USART_CR1_MME_Pos (13U) -#define USART_CR1_MME_Msk (0x1UL << USART_CR1_MME_Pos) /*!< 0x00002000 */ -#define USART_CR1_MME USART_CR1_MME_Msk /*!< Mute Mode Enable */ -#define USART_CR1_CMIE_Pos (14U) -#define USART_CR1_CMIE_Msk (0x1UL << USART_CR1_CMIE_Pos) /*!< 0x00004000 */ -#define USART_CR1_CMIE USART_CR1_CMIE_Msk /*!< Character match interrupt enable */ -#define USART_CR1_OVER8_Pos (15U) -#define USART_CR1_OVER8_Msk (0x1UL << USART_CR1_OVER8_Pos) /*!< 0x00008000 */ -#define USART_CR1_OVER8 USART_CR1_OVER8_Msk /*!< Oversampling by 8-bit or 16-bit mode */ -#define USART_CR1_DEDT_Pos (16U) -#define USART_CR1_DEDT_Msk (0x1FUL << USART_CR1_DEDT_Pos) /*!< 0x001F0000 */ -#define USART_CR1_DEDT USART_CR1_DEDT_Msk /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */ -#define USART_CR1_DEDT_0 (0x01UL << USART_CR1_DEDT_Pos) /*!< 0x00010000 */ -#define USART_CR1_DEDT_1 (0x02UL << USART_CR1_DEDT_Pos) /*!< 0x00020000 */ -#define USART_CR1_DEDT_2 (0x04UL << USART_CR1_DEDT_Pos) /*!< 0x00040000 */ -#define USART_CR1_DEDT_3 (0x08UL << USART_CR1_DEDT_Pos) /*!< 0x00080000 */ -#define USART_CR1_DEDT_4 (0x10UL << USART_CR1_DEDT_Pos) /*!< 0x00100000 */ -#define USART_CR1_DEAT_Pos (21U) -#define USART_CR1_DEAT_Msk (0x1FUL << USART_CR1_DEAT_Pos) /*!< 0x03E00000 */ -#define USART_CR1_DEAT USART_CR1_DEAT_Msk /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */ -#define USART_CR1_DEAT_0 (0x01UL << USART_CR1_DEAT_Pos) /*!< 0x00200000 */ -#define USART_CR1_DEAT_1 (0x02UL << USART_CR1_DEAT_Pos) /*!< 0x00400000 */ -#define USART_CR1_DEAT_2 (0x04UL << USART_CR1_DEAT_Pos) /*!< 0x00800000 */ -#define USART_CR1_DEAT_3 (0x08UL << USART_CR1_DEAT_Pos) /*!< 0x01000000 */ -#define USART_CR1_DEAT_4 (0x10UL << USART_CR1_DEAT_Pos) /*!< 0x02000000 */ -#define USART_CR1_RTOIE_Pos (26U) -#define USART_CR1_RTOIE_Msk (0x1UL << USART_CR1_RTOIE_Pos) /*!< 0x04000000 */ -#define USART_CR1_RTOIE USART_CR1_RTOIE_Msk /*!< Receive Time Out interrupt enable */ -#define USART_CR1_EOBIE_Pos (27U) -#define USART_CR1_EOBIE_Msk (0x1UL << USART_CR1_EOBIE_Pos) /*!< 0x08000000 */ -#define USART_CR1_EOBIE USART_CR1_EOBIE_Msk /*!< End of Block interrupt enable */ -#define USART_CR1_M1_Pos (28U) -#define USART_CR1_M1_Msk (0x1UL << USART_CR1_M1_Pos) /*!< 0x10000000 */ -#define USART_CR1_M1 USART_CR1_M1_Msk /*!< Word length - Bit 1 */ -/****************** Bit definition for USART_CR2 register *******************/ -#define USART_CR2_ADDM7_Pos (4U) -#define USART_CR2_ADDM7_Msk (0x1UL << USART_CR2_ADDM7_Pos) /*!< 0x00000010 */ -#define USART_CR2_ADDM7 USART_CR2_ADDM7_Msk /*!< 7-bit or 4-bit Address Detection */ -#define USART_CR2_LBDL_Pos (5U) -#define USART_CR2_LBDL_Msk (0x1UL << USART_CR2_LBDL_Pos) /*!< 0x00000020 */ -#define USART_CR2_LBDL USART_CR2_LBDL_Msk /*!< LIN Break Detection Length */ -#define USART_CR2_LBDIE_Pos (6U) -#define USART_CR2_LBDIE_Msk (0x1UL << USART_CR2_LBDIE_Pos) /*!< 0x00000040 */ -#define USART_CR2_LBDIE USART_CR2_LBDIE_Msk /*!< LIN Break Detection Interrupt Enable */ -#define USART_CR2_LBCL_Pos (8U) -#define USART_CR2_LBCL_Msk (0x1UL << USART_CR2_LBCL_Pos) /*!< 0x00000100 */ -#define USART_CR2_LBCL USART_CR2_LBCL_Msk /*!< Last Bit Clock pulse */ -#define USART_CR2_CPHA_Pos (9U) -#define USART_CR2_CPHA_Msk (0x1UL << USART_CR2_CPHA_Pos) /*!< 0x00000200 */ -#define USART_CR2_CPHA USART_CR2_CPHA_Msk /*!< Clock Phase */ -#define USART_CR2_CPOL_Pos (10U) -#define USART_CR2_CPOL_Msk (0x1UL << USART_CR2_CPOL_Pos) /*!< 0x00000400 */ -#define USART_CR2_CPOL USART_CR2_CPOL_Msk /*!< Clock Polarity */ -#define USART_CR2_CLKEN_Pos (11U) -#define USART_CR2_CLKEN_Msk (0x1UL << USART_CR2_CLKEN_Pos) /*!< 0x00000800 */ -#define USART_CR2_CLKEN USART_CR2_CLKEN_Msk /*!< Clock Enable */ -#define USART_CR2_STOP_Pos (12U) -#define USART_CR2_STOP_Msk (0x3UL << USART_CR2_STOP_Pos) /*!< 0x00003000 */ -#define USART_CR2_STOP USART_CR2_STOP_Msk /*!< STOP[1:0] bits (STOP bits) */ -#define USART_CR2_STOP_0 (0x1UL << USART_CR2_STOP_Pos) /*!< 0x00001000 */ -#define USART_CR2_STOP_1 (0x2UL << USART_CR2_STOP_Pos) /*!< 0x00002000 */ -#define USART_CR2_LINEN_Pos (14U) -#define USART_CR2_LINEN_Msk (0x1UL << USART_CR2_LINEN_Pos) /*!< 0x00004000 */ -#define USART_CR2_LINEN USART_CR2_LINEN_Msk /*!< LIN mode enable */ -#define USART_CR2_SWAP_Pos (15U) -#define USART_CR2_SWAP_Msk (0x1UL << USART_CR2_SWAP_Pos) /*!< 0x00008000 */ -#define USART_CR2_SWAP USART_CR2_SWAP_Msk /*!< SWAP TX/RX pins */ -#define USART_CR2_RXINV_Pos (16U) -#define USART_CR2_RXINV_Msk (0x1UL << USART_CR2_RXINV_Pos) /*!< 0x00010000 */ -#define USART_CR2_RXINV USART_CR2_RXINV_Msk /*!< RX pin active level inversion */ -#define USART_CR2_TXINV_Pos (17U) -#define USART_CR2_TXINV_Msk (0x1UL << USART_CR2_TXINV_Pos) /*!< 0x00020000 */ -#define USART_CR2_TXINV USART_CR2_TXINV_Msk /*!< TX pin active level inversion */ -#define USART_CR2_DATAINV_Pos (18U) -#define USART_CR2_DATAINV_Msk (0x1UL << USART_CR2_DATAINV_Pos) /*!< 0x00040000 */ -#define USART_CR2_DATAINV USART_CR2_DATAINV_Msk /*!< Binary data inversion */ -#define USART_CR2_MSBFIRST_Pos (19U) -#define USART_CR2_MSBFIRST_Msk (0x1UL << USART_CR2_MSBFIRST_Pos) /*!< 0x00080000 */ -#define USART_CR2_MSBFIRST USART_CR2_MSBFIRST_Msk /*!< Most Significant Bit First */ -#define USART_CR2_ABREN_Pos (20U) -#define USART_CR2_ABREN_Msk (0x1UL << USART_CR2_ABREN_Pos) /*!< 0x00100000 */ -#define USART_CR2_ABREN USART_CR2_ABREN_Msk /*!< Auto Baud-Rate Enable*/ -#define USART_CR2_ABRMODE_Pos (21U) -#define USART_CR2_ABRMODE_Msk (0x3UL << USART_CR2_ABRMODE_Pos) /*!< 0x00600000 */ -#define USART_CR2_ABRMODE USART_CR2_ABRMODE_Msk /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */ -#define USART_CR2_ABRMODE_0 (0x1UL << USART_CR2_ABRMODE_Pos) /*!< 0x00200000 */ -#define USART_CR2_ABRMODE_1 (0x2UL << USART_CR2_ABRMODE_Pos) /*!< 0x00400000 */ -#define USART_CR2_RTOEN_Pos (23U) -#define USART_CR2_RTOEN_Msk (0x1UL << USART_CR2_RTOEN_Pos) /*!< 0x00800000 */ -#define USART_CR2_RTOEN USART_CR2_RTOEN_Msk /*!< Receiver Time-Out enable */ -#define USART_CR2_ADD_Pos (24U) -#define USART_CR2_ADD_Msk (0xFFUL << USART_CR2_ADD_Pos) /*!< 0xFF000000 */ -#define USART_CR2_ADD USART_CR2_ADD_Msk /*!< Address of the USART node */ - -/****************** Bit definition for USART_CR3 register *******************/ -#define USART_CR3_EIE_Pos (0U) -#define USART_CR3_EIE_Msk (0x1UL << USART_CR3_EIE_Pos) /*!< 0x00000001 */ -#define USART_CR3_EIE USART_CR3_EIE_Msk /*!< Error Interrupt Enable */ -#define USART_CR3_IREN_Pos (1U) -#define USART_CR3_IREN_Msk (0x1UL << USART_CR3_IREN_Pos) /*!< 0x00000002 */ -#define USART_CR3_IREN USART_CR3_IREN_Msk /*!< IrDA mode Enable */ -#define USART_CR3_IRLP_Pos (2U) -#define USART_CR3_IRLP_Msk (0x1UL << USART_CR3_IRLP_Pos) /*!< 0x00000004 */ -#define USART_CR3_IRLP USART_CR3_IRLP_Msk /*!< IrDA Low-Power */ -#define USART_CR3_HDSEL_Pos (3U) -#define USART_CR3_HDSEL_Msk (0x1UL << USART_CR3_HDSEL_Pos) /*!< 0x00000008 */ -#define USART_CR3_HDSEL USART_CR3_HDSEL_Msk /*!< Half-Duplex Selection */ -#define USART_CR3_NACK_Pos (4U) -#define USART_CR3_NACK_Msk (0x1UL << USART_CR3_NACK_Pos) /*!< 0x00000010 */ -#define USART_CR3_NACK USART_CR3_NACK_Msk /*!< SmartCard NACK enable */ -#define USART_CR3_SCEN_Pos (5U) -#define USART_CR3_SCEN_Msk (0x1UL << USART_CR3_SCEN_Pos) /*!< 0x00000020 */ -#define USART_CR3_SCEN USART_CR3_SCEN_Msk /*!< SmartCard mode enable */ -#define USART_CR3_DMAR_Pos (6U) -#define USART_CR3_DMAR_Msk (0x1UL << USART_CR3_DMAR_Pos) /*!< 0x00000040 */ -#define USART_CR3_DMAR USART_CR3_DMAR_Msk /*!< DMA Enable Receiver */ -#define USART_CR3_DMAT_Pos (7U) -#define USART_CR3_DMAT_Msk (0x1UL << USART_CR3_DMAT_Pos) /*!< 0x00000080 */ -#define USART_CR3_DMAT USART_CR3_DMAT_Msk /*!< DMA Enable Transmitter */ -#define USART_CR3_RTSE_Pos (8U) -#define USART_CR3_RTSE_Msk (0x1UL << USART_CR3_RTSE_Pos) /*!< 0x00000100 */ -#define USART_CR3_RTSE USART_CR3_RTSE_Msk /*!< RTS Enable */ -#define USART_CR3_CTSE_Pos (9U) -#define USART_CR3_CTSE_Msk (0x1UL << USART_CR3_CTSE_Pos) /*!< 0x00000200 */ -#define USART_CR3_CTSE USART_CR3_CTSE_Msk /*!< CTS Enable */ -#define USART_CR3_CTSIE_Pos (10U) -#define USART_CR3_CTSIE_Msk (0x1UL << USART_CR3_CTSIE_Pos) /*!< 0x00000400 */ -#define USART_CR3_CTSIE USART_CR3_CTSIE_Msk /*!< CTS Interrupt Enable */ -#define USART_CR3_ONEBIT_Pos (11U) -#define USART_CR3_ONEBIT_Msk (0x1UL << USART_CR3_ONEBIT_Pos) /*!< 0x00000800 */ -#define USART_CR3_ONEBIT USART_CR3_ONEBIT_Msk /*!< One sample bit method enable */ -#define USART_CR3_OVRDIS_Pos (12U) -#define USART_CR3_OVRDIS_Msk (0x1UL << USART_CR3_OVRDIS_Pos) /*!< 0x00001000 */ -#define USART_CR3_OVRDIS USART_CR3_OVRDIS_Msk /*!< Overrun Disable */ -#define USART_CR3_DDRE_Pos (13U) -#define USART_CR3_DDRE_Msk (0x1UL << USART_CR3_DDRE_Pos) /*!< 0x00002000 */ -#define USART_CR3_DDRE USART_CR3_DDRE_Msk /*!< DMA Disable on Reception Error */ -#define USART_CR3_DEM_Pos (14U) -#define USART_CR3_DEM_Msk (0x1UL << USART_CR3_DEM_Pos) /*!< 0x00004000 */ -#define USART_CR3_DEM USART_CR3_DEM_Msk /*!< Driver Enable Mode */ -#define USART_CR3_DEP_Pos (15U) -#define USART_CR3_DEP_Msk (0x1UL << USART_CR3_DEP_Pos) /*!< 0x00008000 */ -#define USART_CR3_DEP USART_CR3_DEP_Msk /*!< Driver Enable Polarity Selection */ -#define USART_CR3_SCARCNT_Pos (17U) -#define USART_CR3_SCARCNT_Msk (0x7UL << USART_CR3_SCARCNT_Pos) /*!< 0x000E0000 */ -#define USART_CR3_SCARCNT USART_CR3_SCARCNT_Msk /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */ -#define USART_CR3_SCARCNT_0 (0x1UL << USART_CR3_SCARCNT_Pos) /*!< 0x00020000 */ -#define USART_CR3_SCARCNT_1 (0x2UL << USART_CR3_SCARCNT_Pos) /*!< 0x00040000 */ -#define USART_CR3_SCARCNT_2 (0x4UL << USART_CR3_SCARCNT_Pos) /*!< 0x00080000 */ -#define USART_CR3_WUS_Pos (20U) -#define USART_CR3_WUS_Msk (0x3UL << USART_CR3_WUS_Pos) /*!< 0x00300000 */ -#define USART_CR3_WUS USART_CR3_WUS_Msk /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */ -#define USART_CR3_WUS_0 (0x1UL << USART_CR3_WUS_Pos) /*!< 0x00100000 */ -#define USART_CR3_WUS_1 (0x2UL << USART_CR3_WUS_Pos) /*!< 0x00200000 */ -#define USART_CR3_WUFIE_Pos (22U) -#define USART_CR3_WUFIE_Msk (0x1UL << USART_CR3_WUFIE_Pos) /*!< 0x00400000 */ -#define USART_CR3_WUFIE USART_CR3_WUFIE_Msk /*!< Wake Up Interrupt Enable */ -#define USART_CR3_UCESM_Pos (23U) -#define USART_CR3_UCESM_Msk (0x1UL << USART_CR3_UCESM_Pos) /*!< 0x00800000 */ -#define USART_CR3_UCESM USART_CR3_UCESM_Msk /*!< Clock Enable in Stop mode */ - -/****************** Bit definition for USART_BRR register *******************/ -#define USART_BRR_DIV_FRACTION_Pos (0U) -#define USART_BRR_DIV_FRACTION_Msk (0xFUL << USART_BRR_DIV_FRACTION_Pos) /*!< 0x0000000F */ -#define USART_BRR_DIV_FRACTION USART_BRR_DIV_FRACTION_Msk /*!< Fraction of USARTDIV */ -#define USART_BRR_DIV_MANTISSA_Pos (4U) -#define USART_BRR_DIV_MANTISSA_Msk (0xFFFUL << USART_BRR_DIV_MANTISSA_Pos) /*!< 0x0000FFF0 */ -#define USART_BRR_DIV_MANTISSA USART_BRR_DIV_MANTISSA_Msk /*!< Mantissa of USARTDIV */ - -/****************** Bit definition for USART_GTPR register ******************/ -#define USART_GTPR_PSC_Pos (0U) -#define USART_GTPR_PSC_Msk (0xFFUL << USART_GTPR_PSC_Pos) /*!< 0x000000FF */ -#define USART_GTPR_PSC USART_GTPR_PSC_Msk /*!< PSC[7:0] bits (Prescaler value) */ -#define USART_GTPR_GT_Pos (8U) -#define USART_GTPR_GT_Msk (0xFFUL << USART_GTPR_GT_Pos) /*!< 0x0000FF00 */ -#define USART_GTPR_GT USART_GTPR_GT_Msk /*!< GT[7:0] bits (Guard time value) */ - - -/******************* Bit definition for USART_RTOR register *****************/ -#define USART_RTOR_RTO_Pos (0U) -#define USART_RTOR_RTO_Msk (0xFFFFFFUL << USART_RTOR_RTO_Pos) /*!< 0x00FFFFFF */ -#define USART_RTOR_RTO USART_RTOR_RTO_Msk /*!< Receiver Time Out Value */ -#define USART_RTOR_BLEN_Pos (24U) -#define USART_RTOR_BLEN_Msk (0xFFUL << USART_RTOR_BLEN_Pos) /*!< 0xFF000000 */ -#define USART_RTOR_BLEN USART_RTOR_BLEN_Msk /*!< Block Length */ - -/******************* Bit definition for USART_RQR register ******************/ -#define USART_RQR_ABRRQ_Pos (0U) -#define USART_RQR_ABRRQ_Msk (0x1UL << USART_RQR_ABRRQ_Pos) /*!< 0x00000001 */ -#define USART_RQR_ABRRQ USART_RQR_ABRRQ_Msk /*!< Auto-Baud Rate Request */ -#define USART_RQR_SBKRQ_Pos (1U) -#define USART_RQR_SBKRQ_Msk (0x1UL << USART_RQR_SBKRQ_Pos) /*!< 0x00000002 */ -#define USART_RQR_SBKRQ USART_RQR_SBKRQ_Msk /*!< Send Break Request */ -#define USART_RQR_MMRQ_Pos (2U) -#define USART_RQR_MMRQ_Msk (0x1UL << USART_RQR_MMRQ_Pos) /*!< 0x00000004 */ -#define USART_RQR_MMRQ USART_RQR_MMRQ_Msk /*!< Mute Mode Request */ -#define USART_RQR_RXFRQ_Pos (3U) -#define USART_RQR_RXFRQ_Msk (0x1UL << USART_RQR_RXFRQ_Pos) /*!< 0x00000008 */ -#define USART_RQR_RXFRQ USART_RQR_RXFRQ_Msk /*!< Receive Data flush Request */ -#define USART_RQR_TXFRQ_Pos (4U) -#define USART_RQR_TXFRQ_Msk (0x1UL << USART_RQR_TXFRQ_Pos) /*!< 0x00000010 */ -#define USART_RQR_TXFRQ USART_RQR_TXFRQ_Msk /*!< Transmit data flush Request */ - -/******************* Bit definition for USART_ISR register ******************/ -#define USART_ISR_PE_Pos (0U) -#define USART_ISR_PE_Msk (0x1UL << USART_ISR_PE_Pos) /*!< 0x00000001 */ -#define USART_ISR_PE USART_ISR_PE_Msk /*!< Parity Error */ -#define USART_ISR_FE_Pos (1U) -#define USART_ISR_FE_Msk (0x1UL << USART_ISR_FE_Pos) /*!< 0x00000002 */ -#define USART_ISR_FE USART_ISR_FE_Msk /*!< Framing Error */ -#define USART_ISR_NE_Pos (2U) -#define USART_ISR_NE_Msk (0x1UL << USART_ISR_NE_Pos) /*!< 0x00000004 */ -#define USART_ISR_NE USART_ISR_NE_Msk /*!< Noise detected Flag */ -#define USART_ISR_ORE_Pos (3U) -#define USART_ISR_ORE_Msk (0x1UL << USART_ISR_ORE_Pos) /*!< 0x00000008 */ -#define USART_ISR_ORE USART_ISR_ORE_Msk /*!< OverRun Error */ -#define USART_ISR_IDLE_Pos (4U) -#define USART_ISR_IDLE_Msk (0x1UL << USART_ISR_IDLE_Pos) /*!< 0x00000010 */ -#define USART_ISR_IDLE USART_ISR_IDLE_Msk /*!< IDLE line detected */ -#define USART_ISR_RXNE_Pos (5U) -#define USART_ISR_RXNE_Msk (0x1UL << USART_ISR_RXNE_Pos) /*!< 0x00000020 */ -#define USART_ISR_RXNE USART_ISR_RXNE_Msk /*!< Read Data Register Not Empty */ -#define USART_ISR_TC_Pos (6U) -#define USART_ISR_TC_Msk (0x1UL << USART_ISR_TC_Pos) /*!< 0x00000040 */ -#define USART_ISR_TC USART_ISR_TC_Msk /*!< Transmission Complete */ -#define USART_ISR_TXE_Pos (7U) -#define USART_ISR_TXE_Msk (0x1UL << USART_ISR_TXE_Pos) /*!< 0x00000080 */ -#define USART_ISR_TXE USART_ISR_TXE_Msk /*!< Transmit Data Register Empty */ -#define USART_ISR_LBDF_Pos (8U) -#define USART_ISR_LBDF_Msk (0x1UL << USART_ISR_LBDF_Pos) /*!< 0x00000100 */ -#define USART_ISR_LBDF USART_ISR_LBDF_Msk /*!< LIN Break Detection Flag */ -#define USART_ISR_CTSIF_Pos (9U) -#define USART_ISR_CTSIF_Msk (0x1UL << USART_ISR_CTSIF_Pos) /*!< 0x00000200 */ -#define USART_ISR_CTSIF USART_ISR_CTSIF_Msk /*!< CTS interrupt flag */ -#define USART_ISR_CTS_Pos (10U) -#define USART_ISR_CTS_Msk (0x1UL << USART_ISR_CTS_Pos) /*!< 0x00000400 */ -#define USART_ISR_CTS USART_ISR_CTS_Msk /*!< CTS flag */ -#define USART_ISR_RTOF_Pos (11U) -#define USART_ISR_RTOF_Msk (0x1UL << USART_ISR_RTOF_Pos) /*!< 0x00000800 */ -#define USART_ISR_RTOF USART_ISR_RTOF_Msk /*!< Receiver Time Out */ -#define USART_ISR_EOBF_Pos (12U) -#define USART_ISR_EOBF_Msk (0x1UL << USART_ISR_EOBF_Pos) /*!< 0x00001000 */ -#define USART_ISR_EOBF USART_ISR_EOBF_Msk /*!< End Of Block Flag */ -#define USART_ISR_ABRE_Pos (14U) -#define USART_ISR_ABRE_Msk (0x1UL << USART_ISR_ABRE_Pos) /*!< 0x00004000 */ -#define USART_ISR_ABRE USART_ISR_ABRE_Msk /*!< Auto-Baud Rate Error */ -#define USART_ISR_ABRF_Pos (15U) -#define USART_ISR_ABRF_Msk (0x1UL << USART_ISR_ABRF_Pos) /*!< 0x00008000 */ -#define USART_ISR_ABRF USART_ISR_ABRF_Msk /*!< Auto-Baud Rate Flag */ -#define USART_ISR_BUSY_Pos (16U) -#define USART_ISR_BUSY_Msk (0x1UL << USART_ISR_BUSY_Pos) /*!< 0x00010000 */ -#define USART_ISR_BUSY USART_ISR_BUSY_Msk /*!< Busy Flag */ -#define USART_ISR_CMF_Pos (17U) -#define USART_ISR_CMF_Msk (0x1UL << USART_ISR_CMF_Pos) /*!< 0x00020000 */ -#define USART_ISR_CMF USART_ISR_CMF_Msk /*!< Character Match Flag */ -#define USART_ISR_SBKF_Pos (18U) -#define USART_ISR_SBKF_Msk (0x1UL << USART_ISR_SBKF_Pos) /*!< 0x00040000 */ -#define USART_ISR_SBKF USART_ISR_SBKF_Msk /*!< Send Break Flag */ -#define USART_ISR_RWU_Pos (19U) -#define USART_ISR_RWU_Msk (0x1UL << USART_ISR_RWU_Pos) /*!< 0x00080000 */ -#define USART_ISR_RWU USART_ISR_RWU_Msk /*!< Receive Wake Up from mute mode Flag */ -#define USART_ISR_WUF_Pos (20U) -#define USART_ISR_WUF_Msk (0x1UL << USART_ISR_WUF_Pos) /*!< 0x00100000 */ -#define USART_ISR_WUF USART_ISR_WUF_Msk /*!< Wake Up from stop mode Flag */ -#define USART_ISR_TEACK_Pos (21U) -#define USART_ISR_TEACK_Msk (0x1UL << USART_ISR_TEACK_Pos) /*!< 0x00200000 */ -#define USART_ISR_TEACK USART_ISR_TEACK_Msk /*!< Transmit Enable Acknowledge Flag */ -#define USART_ISR_REACK_Pos (22U) -#define USART_ISR_REACK_Msk (0x1UL << USART_ISR_REACK_Pos) /*!< 0x00400000 */ -#define USART_ISR_REACK USART_ISR_REACK_Msk /*!< Receive Enable Acknowledge Flag */ - -/******************* Bit definition for USART_ICR register ******************/ -#define USART_ICR_PECF_Pos (0U) -#define USART_ICR_PECF_Msk (0x1UL << USART_ICR_PECF_Pos) /*!< 0x00000001 */ -#define USART_ICR_PECF USART_ICR_PECF_Msk /*!< Parity Error Clear Flag */ -#define USART_ICR_FECF_Pos (1U) -#define USART_ICR_FECF_Msk (0x1UL << USART_ICR_FECF_Pos) /*!< 0x00000002 */ -#define USART_ICR_FECF USART_ICR_FECF_Msk /*!< Framing Error Clear Flag */ -#define USART_ICR_NCF_Pos (2U) -#define USART_ICR_NCF_Msk (0x1UL << USART_ICR_NCF_Pos) /*!< 0x00000004 */ -#define USART_ICR_NCF USART_ICR_NCF_Msk /*!< Noise detected Clear Flag */ -#define USART_ICR_ORECF_Pos (3U) -#define USART_ICR_ORECF_Msk (0x1UL << USART_ICR_ORECF_Pos) /*!< 0x00000008 */ -#define USART_ICR_ORECF USART_ICR_ORECF_Msk /*!< OverRun Error Clear Flag */ -#define USART_ICR_IDLECF_Pos (4U) -#define USART_ICR_IDLECF_Msk (0x1UL << USART_ICR_IDLECF_Pos) /*!< 0x00000010 */ -#define USART_ICR_IDLECF USART_ICR_IDLECF_Msk /*!< IDLE line detected Clear Flag */ -#define USART_ICR_TCCF_Pos (6U) -#define USART_ICR_TCCF_Msk (0x1UL << USART_ICR_TCCF_Pos) /*!< 0x00000040 */ -#define USART_ICR_TCCF USART_ICR_TCCF_Msk /*!< Transmission Complete Clear Flag */ -#define USART_ICR_LBDCF_Pos (8U) -#define USART_ICR_LBDCF_Msk (0x1UL << USART_ICR_LBDCF_Pos) /*!< 0x00000100 */ -#define USART_ICR_LBDCF USART_ICR_LBDCF_Msk /*!< LIN Break Detection Clear Flag */ -#define USART_ICR_CTSCF_Pos (9U) -#define USART_ICR_CTSCF_Msk (0x1UL << USART_ICR_CTSCF_Pos) /*!< 0x00000200 */ -#define USART_ICR_CTSCF USART_ICR_CTSCF_Msk /*!< CTS Interrupt Clear Flag */ -#define USART_ICR_RTOCF_Pos (11U) -#define USART_ICR_RTOCF_Msk (0x1UL << USART_ICR_RTOCF_Pos) /*!< 0x00000800 */ -#define USART_ICR_RTOCF USART_ICR_RTOCF_Msk /*!< Receiver Time Out Clear Flag */ -#define USART_ICR_EOBCF_Pos (12U) -#define USART_ICR_EOBCF_Msk (0x1UL << USART_ICR_EOBCF_Pos) /*!< 0x00001000 */ -#define USART_ICR_EOBCF USART_ICR_EOBCF_Msk /*!< End Of Block Clear Flag */ -#define USART_ICR_CMCF_Pos (17U) -#define USART_ICR_CMCF_Msk (0x1UL << USART_ICR_CMCF_Pos) /*!< 0x00020000 */ -#define USART_ICR_CMCF USART_ICR_CMCF_Msk /*!< Character Match Clear Flag */ -#define USART_ICR_WUCF_Pos (20U) -#define USART_ICR_WUCF_Msk (0x1UL << USART_ICR_WUCF_Pos) /*!< 0x00100000 */ -#define USART_ICR_WUCF USART_ICR_WUCF_Msk /*!< Wake Up from stop mode Clear Flag */ - -/* Compatibility defines with other series */ -#define USART_ICR_NECF USART_ICR_NCF - -/******************* Bit definition for USART_RDR register ******************/ -#define USART_RDR_RDR_Pos (0U) -#define USART_RDR_RDR_Msk (0x1FFUL << USART_RDR_RDR_Pos) /*!< 0x000001FF */ -#define USART_RDR_RDR USART_RDR_RDR_Msk /*!< RDR[8:0] bits (Receive Data value) */ - -/******************* Bit definition for USART_TDR register ******************/ -#define USART_TDR_TDR_Pos (0U) -#define USART_TDR_TDR_Msk (0x1FFUL << USART_TDR_TDR_Pos) /*!< 0x000001FF */ -#define USART_TDR_TDR USART_TDR_TDR_Msk /*!< TDR[8:0] bits (Transmit Data value) */ - -/******************************************************************************/ -/* */ -/* Window WATCHDOG (WWDG) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for WWDG_CR register ********************/ -#define WWDG_CR_T_Pos (0U) -#define WWDG_CR_T_Msk (0x7FUL << WWDG_CR_T_Pos) /*!< 0x0000007F */ -#define WWDG_CR_T WWDG_CR_T_Msk /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ -#define WWDG_CR_T_0 (0x01UL << WWDG_CR_T_Pos) /*!< 0x00000001 */ -#define WWDG_CR_T_1 (0x02UL << WWDG_CR_T_Pos) /*!< 0x00000002 */ -#define WWDG_CR_T_2 (0x04UL << WWDG_CR_T_Pos) /*!< 0x00000004 */ -#define WWDG_CR_T_3 (0x08UL << WWDG_CR_T_Pos) /*!< 0x00000008 */ -#define WWDG_CR_T_4 (0x10UL << WWDG_CR_T_Pos) /*!< 0x00000010 */ -#define WWDG_CR_T_5 (0x20UL << WWDG_CR_T_Pos) /*!< 0x00000020 */ -#define WWDG_CR_T_6 (0x40UL << WWDG_CR_T_Pos) /*!< 0x00000040 */ - -/* Legacy defines */ -#define WWDG_CR_T0 WWDG_CR_T_0 -#define WWDG_CR_T1 WWDG_CR_T_1 -#define WWDG_CR_T2 WWDG_CR_T_2 -#define WWDG_CR_T3 WWDG_CR_T_3 -#define WWDG_CR_T4 WWDG_CR_T_4 -#define WWDG_CR_T5 WWDG_CR_T_5 -#define WWDG_CR_T6 WWDG_CR_T_6 - -#define WWDG_CR_WDGA_Pos (7U) -#define WWDG_CR_WDGA_Msk (0x1UL << WWDG_CR_WDGA_Pos) /*!< 0x00000080 */ -#define WWDG_CR_WDGA WWDG_CR_WDGA_Msk /*!< Activation bit */ - -/******************* Bit definition for WWDG_CFR register *******************/ -#define WWDG_CFR_W_Pos (0U) -#define WWDG_CFR_W_Msk (0x7FUL << WWDG_CFR_W_Pos) /*!< 0x0000007F */ -#define WWDG_CFR_W WWDG_CFR_W_Msk /*!< W[6:0] bits (7-bit window value) */ -#define WWDG_CFR_W_0 (0x01UL << WWDG_CFR_W_Pos) /*!< 0x00000001 */ -#define WWDG_CFR_W_1 (0x02UL << WWDG_CFR_W_Pos) /*!< 0x00000002 */ -#define WWDG_CFR_W_2 (0x04UL << WWDG_CFR_W_Pos) /*!< 0x00000004 */ -#define WWDG_CFR_W_3 (0x08UL << WWDG_CFR_W_Pos) /*!< 0x00000008 */ -#define WWDG_CFR_W_4 (0x10UL << WWDG_CFR_W_Pos) /*!< 0x00000010 */ -#define WWDG_CFR_W_5 (0x20UL << WWDG_CFR_W_Pos) /*!< 0x00000020 */ -#define WWDG_CFR_W_6 (0x40UL << WWDG_CFR_W_Pos) /*!< 0x00000040 */ - -/* Legacy defines */ -#define WWDG_CFR_W0 WWDG_CFR_W_0 -#define WWDG_CFR_W1 WWDG_CFR_W_1 -#define WWDG_CFR_W2 WWDG_CFR_W_2 -#define WWDG_CFR_W3 WWDG_CFR_W_3 -#define WWDG_CFR_W4 WWDG_CFR_W_4 -#define WWDG_CFR_W5 WWDG_CFR_W_5 -#define WWDG_CFR_W6 WWDG_CFR_W_6 - -#define WWDG_CFR_WDGTB_Pos (7U) -#define WWDG_CFR_WDGTB_Msk (0x3UL << WWDG_CFR_WDGTB_Pos) /*!< 0x00000180 */ -#define WWDG_CFR_WDGTB WWDG_CFR_WDGTB_Msk /*!< WDGTB[1:0] bits (Timer Base) */ -#define WWDG_CFR_WDGTB_0 (0x1UL << WWDG_CFR_WDGTB_Pos) /*!< 0x00000080 */ -#define WWDG_CFR_WDGTB_1 (0x2UL << WWDG_CFR_WDGTB_Pos) /*!< 0x00000100 */ - -/* Legacy defines */ -#define WWDG_CFR_WDGTB0 WWDG_CFR_WDGTB_0 -#define WWDG_CFR_WDGTB1 WWDG_CFR_WDGTB_1 - -#define WWDG_CFR_EWI_Pos (9U) -#define WWDG_CFR_EWI_Msk (0x1UL << WWDG_CFR_EWI_Pos) /*!< 0x00000200 */ -#define WWDG_CFR_EWI WWDG_CFR_EWI_Msk /*!< Early Wakeup Interrupt */ - -/******************* Bit definition for WWDG_SR register ********************/ -#define WWDG_SR_EWIF_Pos (0U) -#define WWDG_SR_EWIF_Msk (0x1UL << WWDG_SR_EWIF_Pos) /*!< 0x00000001 */ -#define WWDG_SR_EWIF WWDG_SR_EWIF_Msk /*!< Early Wakeup Interrupt Flag */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup Exported_macros - * @{ - */ - -/******************************* ADC Instances ********************************/ -#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1) -#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC1_COMMON) - -/******************************* AES Instances ********************************/ -#define IS_AES_ALL_INSTANCE(INSTANCE) ((INSTANCE) == AES) - -/******************************* COMP Instances *******************************/ -#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \ - ((INSTANCE) == COMP2)) - -#define IS_COMP_COMMON_INSTANCE(COMMON_INSTANCE) ((COMMON_INSTANCE) == COMP12_COMMON) - -/******************************* CRC Instances ********************************/ -#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC) - -/******************************* DMA Instances *********************************/ -#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \ - ((INSTANCE) == DMA1_Channel2) || \ - ((INSTANCE) == DMA1_Channel3) || \ - ((INSTANCE) == DMA1_Channel4) || \ - ((INSTANCE) == DMA1_Channel5) || \ - ((INSTANCE) == DMA1_Channel6) || \ - ((INSTANCE) == DMA1_Channel7)) - -/******************************* GPIO Instances *******************************/ -#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \ - ((INSTANCE) == GPIOB) || \ - ((INSTANCE) == GPIOC) || \ - ((INSTANCE) == GPIOD) || \ - ((INSTANCE) == GPIOH)) - -#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \ - ((INSTANCE) == GPIOB) || \ - ((INSTANCE) == GPIOC) || \ - ((INSTANCE) == GPIOD)) - -/******************************** I2C Instances *******************************/ -#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \ - ((INSTANCE) == I2C2)) - -/****************** I2C Instances : wakeup capability from stop modes *********/ -#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) (((INSTANCE) == I2C1)) - - -/******************************** I2S Instances *******************************/ -#define IS_I2S_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI2) - - -/****************************** RTC Instances *********************************/ -#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC) - -/******************************** SMBUS Instances *****************************/ -#define IS_SMBUS_INSTANCE(INSTANCE) ((INSTANCE) == I2C1) - -/******************************** SPI Instances *******************************/ -#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \ - ((INSTANCE) == SPI2)) - -/****************** LPTIM Instances : All supported instances *****************/ -#define IS_LPTIM_INSTANCE(INSTANCE) ((INSTANCE) == LPTIM1) - -/************* LPTIM instances supporting the encoder mode feature ************/ -#define IS_LPTIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) ((INSTANCE) == LPTIM1) - -/****************** TIM Instances : All supported instances *******************/ -#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM6) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/************* TIM Instances : at least 1 capture/compare channel *************/ -#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/************ TIM Instances : at least 2 capture/compare channels *************/ -#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/************ TIM Instances : at least 3 capture/compare channels *************/ -#define IS_TIM_CC3_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) - -/************ TIM Instances : at least 4 capture/compare channels *************/ -#define IS_TIM_CC4_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) - -/****************** TIM Instances : DMA requests generation (UDE) *************/ -#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM6)) - -/************ TIM Instances : DMA requests generation (CCxDE) *****************/ -#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) - -/******************** TIM Instances : DMA burst feature ***********************/ -#define IS_TIM_DMABURST_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) - -/******************* TIM Instances : output(s) available **********************/ -#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \ - ((((INSTANCE) == TIM2) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3) || \ - ((CHANNEL) == TIM_CHANNEL_4))) \ - || \ - (((INSTANCE) == TIM21) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2))) \ - || \ - (((INSTANCE) == TIM22) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2)))) - -/****************** TIM Instances : supporting clock division *****************/ -#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****** TIM Instances : supporting external clock mode 1 for ETRF input *******/ -#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21)) - -/****** TIM Instances : supporting external clock mode 2 for ETRF input *******/ -#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/ -#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21)) - -/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/ -#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****************** TIM Instances : supporting counting mode selection ********/ -#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****************** TIM Instances : supporting encoder interface **************/ -#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/***************** TIM Instances : external trigger input availabe ************/ -#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/ -#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM6) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/ -#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****************** TIM Instances : remapping capability **********************/ -#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM21) || \ - ((INSTANCE) == TIM22)) - -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - -/******************* TIM Instances : output(s) OCXEC register *****************/ -#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) - -/******************* TIM Instances : Timer input XOR function *****************/ -#define IS_TIM_XOR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) - -/******************** UART Instances : Asynchronous mode **********************/ -#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/******************** USART Instances : Synchronous mode **********************/ -#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/****************** USART Instances : Auto Baud Rate detection ****************/ - -#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/****************** UART Instances : Driver Enable *****************/ -#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) || \ - ((INSTANCE) == LPUART1)) - -/******************** UART Instances : Half-Duplex mode **********************/ -#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) || \ - ((INSTANCE) == LPUART1)) - -/******************** UART Instances : LIN mode **********************/ -#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/******************** UART Instances : Wake-up from Stop mode **********************/ -#define IS_UART_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) || \ - ((INSTANCE) == LPUART1)) - -/****************** UART Instances : Hardware Flow control ********************/ -#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) || \ - ((INSTANCE) == LPUART1)) - -/********************* UART Instances : Smard card mode ***********************/ -#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/*********************** UART Instances : IRDA mode ***************************/ -#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/******************** LPUART Instance *****************************************/ -#define IS_LPUART_INSTANCE(INSTANCE) ((INSTANCE) == LPUART1) - -/****************************** IWDG Instances ********************************/ -#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG) - -/****************************** WWDG Instances ********************************/ -#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG) - -/** - * @} - */ - -/******************************************************************************/ -/* For a painless codes migration between the STM32L0xx device product */ -/* lines, the aliases defined below are put in place to overcome the */ -/* differences in the interrupt handlers and IRQn definitions. */ -/* No need to update developed interrupt code when moving across */ -/* product lines within the same STM32L0 Family */ -/******************************************************************************/ - -/* Aliases for __IRQn */ - -#define RNG_LPUART1_IRQn AES_LPUART1_IRQn -#define LPUART1_IRQn AES_LPUART1_IRQn -#define AES_RNG_LPUART1_IRQn AES_LPUART1_IRQn -#define TIM6_DAC_IRQn TIM6_IRQn -#define RCC_CRS_IRQn RCC_IRQn -#define DMA1_Channel4_5_IRQn DMA1_Channel4_5_6_7_IRQn -#define ADC1_IRQn ADC1_COMP_IRQn - -/* Aliases for __IRQHandler */ -#define LPUART1_IRQHandler AES_LPUART1_IRQHandler -#define RNG_LPUART1_IRQHandler AES_LPUART1_IRQHandler -#define AES_RNG_LPUART1_IRQHandler AES_LPUART1_IRQHandler -#define TIM6_DAC_IRQHandler TIM6_IRQHandler -#define RCC_CRS_IRQHandler RCC_IRQHandler -#define DMA1_Channel4_5_IRQHandler DMA1_Channel4_5_6_7_IRQHandler -#define ADC1_IRQHandler ADC1_COMP_IRQHandler - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __STM32L061xx_H */ - - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Include/stm32l062xx.h b/Include/stm32l062xx.h index 5af44ed..d62948c 100644 --- a/Include/stm32l062xx.h +++ b/Include/stm32l062xx.h
@@ -3639,7 +3639,9 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ @@ -5585,13 +5587,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7369,9 +7365,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l063xx.h b/Include/stm32l063xx.h index 1f05574..80d7b07 100644 --- a/Include/stm32l063xx.h +++ b/Include/stm32l063xx.h
@@ -3781,7 +3781,9 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ @@ -5742,13 +5744,7 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) -#define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7526,9 +7522,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) ((INSTANCE) == TIM2)
diff --git a/Include/stm32l071xx.h b/Include/stm32l071xx.h index 1d34ed8..89bf002 100644 --- a/Include/stm32l071xx.h +++ b/Include/stm32l071xx.h
@@ -3271,8 +3271,12 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5223,13 +5227,8 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -6372,9 +6371,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3))
diff --git a/Include/stm32l072xx.h b/Include/stm32l072xx.h index 377c44d..adb8c21 100644 --- a/Include/stm32l072xx.h +++ b/Include/stm32l072xx.h
@@ -3659,9 +3659,13 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5726,13 +5730,8 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7551,9 +7550,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3))
diff --git a/Include/stm32l073xx.h b/Include/stm32l073xx.h index 8b98906..eba7029 100644 --- a/Include/stm32l073xx.h +++ b/Include/stm32l073xx.h
@@ -3801,9 +3801,13 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5885,13 +5889,8 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7710,9 +7709,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3))
diff --git a/Include/stm32l081xx.h b/Include/stm32l081xx.h index 2599c58..971d92d 100644 --- a/Include/stm32l081xx.h +++ b/Include/stm32l081xx.h
@@ -3399,8 +3399,12 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5360,13 +5364,8 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -6512,9 +6511,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3))
diff --git a/Include/stm32l082xx.h b/Include/stm32l082xx.h index 94159e8..3af095f 100644 --- a/Include/stm32l082xx.h +++ b/Include/stm32l082xx.h
@@ -3787,9 +3787,13 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -5863,13 +5867,8 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7691,9 +7690,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3))
diff --git a/Include/stm32l083xx.h b/Include/stm32l083xx.h index 0b108ba..13d9e97 100644 --- a/Include/stm32l083xx.h +++ b/Include/stm32l083xx.h
@@ -3929,9 +3929,13 @@ /* Reset and Clock Control */ /* */ /******************************************************************************/ - +/* +* @brief Specific device feature definitions (not present on all devices in the STM32L0 family) +*/ #define RCC_HSI48_SUPPORT /*!< HSI48 feature support */ #define RCC_HSECSS_SUPPORT /*!< HSE CSS feature activation support */ +#define RCC_MCO3_SUPPORT /*!<Support MCO3 */ +#define RCC_MCO3_AF2_SUPPORT /*!<Support MCO3 on Alternate Function AF0 */ /******************** Bit definition for RCC_CR register ********************/ #define RCC_CR_HSION_Pos (0U) @@ -6022,13 +6026,8 @@ /* * @brief Specific device feature definitions (not present on all devices in the STM32L0 family) */ -#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) \ - || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx) #define TIM_TIM2_REMAP_HSI_SUPPORT /*!<Support remap HSI on TIM2 */ #define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#else -#define TIM_TIM2_REMAP_HSI48_SUPPORT /*!<Support remap HSI48 on TIM2 */ -#endif /******************* Bit definition for TIM_CR1 register ********************/ #define TIM_CR1_CEN_Pos (0U) @@ -7850,9 +7849,6 @@ ((INSTANCE) == TIM21) || \ ((INSTANCE) == TIM22)) -/****************** TIM Instances : supporting synchronization ****************/ -#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) - /******************* TIM Instances : output(s) OCXEC register *****************/ #define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3))
diff --git a/Include/stm32l0xx.h b/Include/stm32l0xx.h index c37e141..e4a67f4 100644 --- a/Include/stm32l0xx.h +++ b/Include/stm32l0xx.h
@@ -63,7 +63,7 @@ !defined (STM32L011xx) && !defined (STM32L021xx) && \ !defined (STM32L031xx) && !defined (STM32L041xx) && \ !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \ - !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \ + !defined (STM32L062xx) && !defined (STM32L063xx) && \ !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \ !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) /* #define STM32L010x4 */ /*!< STM32L010K4, STM32L010F4 Devices */ @@ -77,7 +77,6 @@ /* #define STM32L051xx */ /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8, STM32L051K6, STM32L051T6, STM32L051T8 Devices */ /* #define STM32L052xx */ /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8, STM32L052T6, STM32L052T8 Devices */ /* #define STM32L053xx */ /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */ - /* #define STM32L061xx */ /*!< */ /* #define STM32L062xx */ /*!< STM32L062K8 Devices */ /* #define STM32L063xx */ /*!< STM32L063C8, STM32L063R8 Devices */ /* #define STM32L071xx */ /*!< STM32L071V8, STM32L071K8, STM32L071VB, STM32L071RB, STM32L071CB, STM32L071KB, STM32L071VZ, STM32L071RZ, STM32L071CZ, STM32L071KZ, STM32L071C8 Devices */ @@ -105,7 +104,7 @@ */ #define __STM32L0xx_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */ #define __STM32L0xx_CMSIS_VERSION_SUB1 (0x09) /*!< [23:16] sub1 version */ -#define __STM32L0xx_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L0xx_CMSIS_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */ #define __STM32L0xx_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ #define __STM32L0xx_CMSIS_VERSION ((__STM32L0xx_CMSIS_VERSION_MAIN << 24)\ |(__STM32L0xx_CMSIS_VERSION_SUB1 << 16)\ @@ -145,8 +144,6 @@ #include "stm32l062xx.h" #elif defined(STM32L063xx) #include "stm32l063xx.h" -#elif defined(STM32L061xx) - #include "stm32l061xx.h" #elif defined(STM32L071xx) #include "stm32l071xx.h" #elif defined(STM32L072xx)
diff --git a/License.md b/License.md index 64783f9..e0d829b 100644 --- a/License.md +++ b/License.md
@@ -81,4 +81,3 @@ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. -
diff --git a/README.md b/README.md index bcc5bf3..edafd52 100644 --- a/README.md +++ b/README.md
@@ -1,4 +1,4 @@ -# STM32CubeL0 CMSIS Device MCU Component +# STM32CubeG4 CMSIS Device MCU Component ## Overview @@ -19,17 +19,23 @@ This **cmsis_device_l0** MCU component repo is one element of the STM32CubeL0 MCU embedded software package, providing the **cmsis device** part. +## Release note + +Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/cmsis_device_l0/blob/master/Release_Notes.html). + ## Compatibility information In this table, you can find the successive versions of this CMSIS Device component, in-line with the corresponding versions of the full MCU package: CMSIS Device L0 | CMSIS Core | Was delivered in the full MCU package --------------- | ---------- | ------------------------------------- -Tag v1.9.0 | Tag v4.5_cm0 | Tag v1.11.2 +Tag v1.9.0 | Tag v5.4.0_cm0 | Tag v1.11.0 (and following, if any, till next new tag) +Tag v1.9.1 | Tag v5.4.0_cm0 | Tag v1.12.0 (and following, if any, till next new tag) + The full **STM32CubeL0** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeL0). ## Troubleshooting If you have any issue with the **Software content** of this repo, you can [file an issue on Github](https://github.com/STMicroelectronics/cmsis_device_l0/issues/new). -For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus). +For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus). \ No newline at end of file
diff --git a/Release_Notes.html b/Release_Notes.html index 97a9f83..a38f343 100644 --- a/Release_Notes.html +++ b/Release_Notes.html
@@ -1,441 +1,369 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head> -<script><endnote><head> -<script><endnote><head> -<script><endnote><head> -<script><endnote><head> -<script></script> -<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> -<link rel="File-List" href="Release_Notes_files/filelist.xml"> -<link rel="Edit-Time-Data" href="Release_Notes_files/editdata.mso"><title>Release Notes for STM32L0xx CMSIS</title> - -<style> -div.Section1 { -page: Section1; -font-family: Arial,Helvetica,sans-serif; -} -h1 { -font-size: 24pt; -font-weight: bold; -font-family: Arial,Helvetica,sans-serif; -text-align: center; -color: #3366ff; -} -h2 { -margin: 12pt 0in 3pt; -page-break-after: avoid; -font-weight: bold; -font-family: Arial,Helvetica,sans-serif; -background-color: #3366ff; -color: white; -padding-left: 5px; -font-size: 16pt; -} -h3 { -margin-left: 0in; -font-weight: bold; -font-family: Arial,Helvetica,sans-serif; -background-color: #3366ff; -width: 200px; -margin-right: 500pt; -color: white; -padding-left: 5px; -padding-top: 2px; -padding-bottom: 2px; -font-size: 12pt; -} -h4 { -font-family: Arial,Helvetica,sans-serif; -font-weight: bold; -text-decoration: underline; -font-size: 12pt; -} -p { -margin: 0px 0px 0px 0in; -font-family: Arial,Helvetica,sans-serif; -padding-top: 3px; -padding-bottom: 3px; -font-size: 12pt; -} -ul { -font-family: Arial,Helvetica,sans-serif; -margin-top: 3px; -margin-bottom: 3px; -font-size: 10pt; -} -caption { -margin-top: 10px; -font-family: Arial,Helvetica,sans-serif; -font-size: 11pt; -} -hr { -width: 100%; -} -.guidance { -background-color: #e5b8b7; -font-style: italic; -font-family: Arial,Helvetica,sans-serif; -padding-top: 3px; -padding-bottom: 3px; -margin-top: 3px; -margin-bottom: 3px; -font-size: 10pt; -} -.guidance_title { -font-style: normal; -font-weight: bold; -text-decoration: underline; -font-family: Arial,Helvetica,sans-serif; -font-size: 10pt; -} -.tickets { -border: 1pt solid #9cc2e5; -font-family: Arial,Helvetica,sans-serif; -margin-bottom: 3px; -margin-top: 3px; -font-size: 10pt; -} -.tickets th { -border: 1pt solid #9cc2e5; -font-size: 12pt; -background-color: #39a9dc; -color: white; -text-align: center; -} -.tickets td { -border: 1pt solid #9cc2e5; -min-height: 32px; -} -tr:nth-child(even) {background-color: #cee2f2;} -tr:nth-child(even) {background-color: #e8f1f9;} -.topic1 { -margin-top: 3px; -margin-bottom: 3px; -margin-left: 40px; -} -.topic2 { -margin-top: 3px; -margin-bottom: 3px; -} -.topic3 { -margin-top: 3px; -margin-bottom: 3px; -margin-left: 20px; -} -#purpose { -margin-top: 3px; -margin-bottom: 3px; -} -#identification { -margin-top: 3px; -margin-bottom: 3px; -} -</style><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>Raouf Hosni</o:LastAuthor> <o:Revision>69</o:Revision> <o:TotalTime>153</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-07-21T16:16:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>410</o:Words> <o:Characters>2339</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>19</o:Lines> <o:Paragraphs>5</o:Paragraphs> <o:CharactersWithSpaces>2744</o:CharactersWithSpaces> <o:Version>11.8132</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:SpellingState>Clean</w:SpellingState> <w:GrammarState>Clean</w:GrammarState> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="6146"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head> -<body link="blue" vlink="blue"> -<script type="text/javascript"> -var toggle_hist_disp = true; -function toggle_history() -{ -if (toggle_hist_disp) -{ -toggle_hist_disp = false; -var filter_off_text = document.createTextNode("Hide History"); -document.getElementById('filter_hist').innerHTML = ""; -document.getElementById('filter_hist').appendChild(filter_off_text); -document.getElementById("history").hidden = false; -} -else -{ -toggle_hist_disp = true; -var filter_on_text = document.createTextNode("Show History"); -document.getElementById('filter_hist').innerHTML = ""; -document.getElementById('filter_hist').appendChild(filter_on_text); -document.getElementById("history").hidden = true; -} -}</script> -<div style="width: 1034px;" class="Section1"><span style="font-size: 8pt; font-family: "Arial","sans-serif"; color: blue;"></span><small><a href="../../../../../Release_Notes.html">Back to Release page</a></small> -<div id="header"> -<h1 style="margin-bottom: 18pt; text-align: center;" align="center">Release -Notes for <span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">STM32L0xx -CMSIS</span></h1> -<p style="text-align: center;">Copyright 2016 -STMicroelectronics</p> -<p style="text-align: center;"><span style="font-size: 10pt; font-family: "Arial","sans-serif"; color: black;"><img style="border: 0px solid ; width: 112px; height: 83px;" alt="" id="_x0000_i1026" src="_htmresc/st_logo.png"></span></p> -</div> -<div id="license" class="topic1"> -<h2>License</h2> -This software component is licensed by ST under BSD 3-Clause -license, the "License"; You may not use this component except in -compliance with -the License. You may obtain a copy of the License at: -<p style="text-align: center;"><a href="https://opensource.org/licenses/BSD-3-Clause" target="_blank">https://opensource.org/licenses/BSD-3-Clause</a></p> -</div> -<br> -<div id="release_container" class="topic1"> -<div class="topic2" id="identification"> -<h3>V1.9.0 / 26-October-2018</h3> -</div> -<div class="topic3" id="changes"> -<h4><big>Main changes</big></h4><ul><li><big>Add the support of <span style="font-weight: bold;">STM32L010xx</span> devices</big></li><ul><li><big>Add stm32l010xb.h, stm32l010x8.h, stm32l010x6.h and stm32l010x4.h device description files</big></li></ul><ul><li><big>Add -startup_stm32l010xb.s, startup_stm32l010x8.s, -startup_stm32l010x6.s and startup_stm32l010x4.s </big><big>startup files </big><big>for EWARM, MDK-ARM and -SW4STM32 toolchains</big></li></ul><ul><li><big>Add EWARM associated linker files for execution from internal RAM or internal FLASH</big></li></ul></ul><big><br></big><ul><li><big>stm32l0xx.h</big></li><ul><li><big>Add the following device defines:</big></li><ul><li><big>"#define STM32L010xB" for all STM32L010xB devices</big></li><li><big>"#define STM32L010x8" for all STM32L010x8 devices</big></li><li><big>"#define STM32L010x6" for all STM32L010x6 devices</big></li><li><big>"#define STM32L010x4" for all STM32L010x4 devices</big></li></ul><li><big>Align ErrorStatus typedef to common error handling.<br></big></li></ul></ul><br><ul><li><big>All stm32l0xxxx.h device description files.h</big></li><ul><li><big>[MISRAC2012-Rule-10.6] Use 'UL' postfix for _Msk definitions and memory/peripheral base addresses</big></li><li><big>Correct comments in the bit definition of RCC_AHBRST, RCC_APB2RSTR and RCC_APB1RSTR registers.</big></li><li><big>Rename RTC_CR_BCK bit to RTC_CR_BKP to be aligned with reference manual.</big></li><li><big>Add missing definition of IS_TSC_ALL_INSTANCE after TSC driver update.</big></li><li><big>Add back the bit definition of SYSCFG_CFGR3_EN_VREFINT in SYSCFG_CFGR3 register.</big></li><li><big>Rename GPIO_AFRL_AFRLx and GPIO_AFRL_AFRHx bit definitions (from GPIO_AFRL/AFRH registers) to GPIO_AFRL_AFSELx.</big></li><li><big>Align IS_TIM_XXX_INSTANCE definitions with other series.</big></li><li><big>Remove cast (uint8_t) in CRC_IDR_IDR definition.</big></li><li><big>Add missing definition of IS_PCD_ALL_INSTANCE macro after USB driver update.</big></li><li><big>Add definition of IS_UART_DRIVER_ENABLE_INSTANCE macro after UART driver update.</big></li><li><big>Add compatibility definition of USART_ICR_NECF / USART_ICR_NCF with others series.</big></li><li><big>Update IS_UART_INSTANCE macro definition.</big></li><li><big>Add definition of I</big><big>S_LPTIM_ENCODER_INTERFACE_INSTANCE macro after LPTIM driver update.</big></li><li><big>Move definition of FLASH_BANK2_BASE start address to stm32l0xx_hal_flash.h to be dependant on Memory Size register.</big></li><li><big>Update interrupt definition to use </big><big>DMA1_Channel4_5_IRQn </big><big> for STM32L011xx and STM32L021xx devices.</big></li><li><big>Correct PWR_WAKEUP_PIN definitions for L011xx and L021xx devices.<br></big></li></ul></ul><br><ul><li><big>system_stm32l0xx.c</big></li><ul><li><big>Update file to correct comments for VECT_TAB_OFFSET definition.</big></li><li><big>Update default MSI_VALUE reset value set in SystemCoreClock.</big></li><li><big>Update SystemCoreClockUpdate() function to check HSI16DIVF for HSI divided by 4.<br></big></li></ul></ul><ul><li><big>startup_stm32l0xxxx.s</big></li><ul><li><big>Update startup files to use DMA1_Channel4_5_IRQn/IRQHandler for STM32L011xx and STM32L01xx devices.<br></big></li></ul></ul><br><br></div> -<br> -</div> -<div style="margin-left: 40px;"><button id="filter_hist" onclick="toggle_history()">Show -History</button><br> -</div> -<div id="history" class="topic1" hidden=""> -<h2>Update History</h2> -<b><u><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: black;"></span></u></b><br><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.8.0 -/ 12-January-2018</span></h3> -<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"> -</span></u></b> -<ul><li><span style="color: rgb(0, 0, 0); font-family: Verdana,sans-serif; font-size: 13.3333px; font-style: normal; font-variant: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 1; word-spacing: 0px; display: inline ! important; float: none;">Internal Release.</span></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.7.2 -/ 25-August-2017</span></h3> -<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -<ul><li><span style="text-align: left; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Verdana; font-style: normal; font-variant: normal; font-weight: normal; font-size: 13px; line-height: normal; font-stretch: normal; white-space: normal; color: rgb(0, 0, 0); word-spacing: 0px; display: inline ! important;">Removed DATE and VERSION fields from header files.</span></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.7.1 -/ 25-November-2016</span></h3> -<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -<ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Updated IS_COMP_COMMON_INSTANCE() macro.</big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Corrected ADC_CFGR2_TOVS bit and mask definitions.<br></big></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.7.0 -/ 31-May-2016</span></h3> -<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -<ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added Pos and Msk macros missing within the CMSIS stm32l083xx.h file.</big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added LCD_CR_BUFEN bit definition in LCD CR register for stm32l053xx, stm32l063xx, stm32l073xx, stm32l083xx devices.</big></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.6.0 -/ 15-April-2016</span></h3> -<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -<ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -Pos and Msk macros within the CMSIS files. <br> -</big></li><ul><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;">For -example, on the previous CMSIS version (V1.5.0), the constant -ADC_IER_EOCALIE was defined as follow :<br> -#define ADC_IER_EOCALIE - -((uint32_t)0x00000800U)<br> -</span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"> </span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;">On -this new CMSIS version (V1.6.0), the constant ADC_IER_EOCALIE is now -defined as follow :<br> -#define ADC_IER_EOCALIE_Pos - (11U)<br> -#define ADC_IER_EOCALIE_Msk - (0x1U << -ADC_IER_EOCALIE_Pos) <br> -#define ADC_IER_EOCALIE - - ADC_IER_EOCALIE_Msk <br> -</span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><span style="font-weight: bold;"></span>The same rule -applies on all the other constants present inside the CMSIS files.<br> - <span style="font-weight: bold;"></span></span><br> -</li></ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">MISRA -C 2004 rule 10.6 compliancy. (A 'U' suffix shall be applied to -all constants of unisgned type)</big><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">.<br><br> -</big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Several SYSCFG definition changes :<br>- SYSCFG_CFGR3_EN_VREFINT -enable bit suppressed. (no more needed and must not be used). <br></big><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">- SYSCFG_CFGR3_EN_BGAP -define suppressed.<br>- SYSCFG_CFGR3_REF_HSI48_RDYF, -SYSCFG_CFGR3_SENSOR_ADC_RDYF, SYSCFG_CFGR3_VREFINT_ADC_RDYF, -SYSCFG_CFGR3_VREFINT_COMP_RDYF flags suppressed, -SYSCFG_CFGR3_VREFINT_RDYF must -be used instead (this flag is a combination of the 4 suppressed flags).<br>- Added -SYSCFG_CFGR3_REF_RC48MHz_RDYF, SYSCFG_CFGR3_REF_HSI48_RDYF, -SYSCFG_VREFINT_ADC_RDYF, SYSCFG_CFGR3_SENSOR_ADC_RDYF, -SYSCFG_CFGR3_VREFINT_ADC_RDYF and SYSCFG_CFGR3_VREFINT_COMP_RDYF defines.<o:p></o:p></big> - -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"> -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"> -</big></big></big></li><li><big style="color: windowtext; font-family: "Verdana","sans-serif"; font-size: 10pt;">Aligned register namings</big><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"> with the different L0 Reference Manual </big></big></big><big style="color: windowtext; font-family: "Verdana","sans-serif"; font-size: 10pt;">(</big><big style="color: windowtext; font-family: "Verdana","sans-serif"; font-size: 10pt;">For STM32L0x1 : RM0377 Rev5, for </big><big style="color: windowtext; font-family: "Verdana","sans-serif"; font-size: 10pt;">STM32L0x2 : </big><big style="color: windowtext; font-family: "Verdana","sans-serif"; font-size: 10pt;">RM0367 Rev2, for </big><big style="color: windowtext; font-family: "Verdana","sans-serif"; font-size: 10pt;">STM32L0x3 : RM0367 Rev4</big><span style="font-family: "Verdana","sans-serif";">)</span><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">.<br>The list of -the modification is listed hereafter :<br> -<br> -</big></big></big></li><ul><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Introduced -new masks in EXTI bit definitions in order to simplify LL source -code. </big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renamed -RCC_CFGR_MCO_x into RCC_CFGR_MCOSEL_x</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added - FLASHSIZE_BASE, UID_BASE and SRAM_SIZE_MAX defines.</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renamed macro IS_DMA_ALL_INSTANCE() to -IS_DMA_STREAM_ALL_INSTANCE().</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added - new macros: IS_I2C_WAKEUP_FROMSTOP_INSTANCE(), IS_ADC_COMMON_INSTANCE() and IS_LPUART_INSTANCE().</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added - new defines PWR_PVD_SUPPORT to handle the PVD feature.</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Corrected -the value of FLASH_END for STM32L011xx or STM32L021xx devices.</big></big></span></li></ul></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.5.0 -/ 8-January-2016</span></h3><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -</big> -</big><ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">MISRA -C 2004 rule 5.1 and rule 10.6 compliancy.<br> -</big></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Several -renaming in order to be aligned with the Reference Manual.The list of -the modification is listed hereafter :<br> -<br> -</big></big></big></li><ul><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new COMP_Common_TypeDef structure.</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Removal -of the RCR field inside the TIM_TypeDef structure.</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new define COMP12_COMMON</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new define DAC1 (same as DAC)</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new define ADC1_COMMON</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new define ADC_CHSELR_CHSEL</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new define COMP_CSR_WINMODE</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of a new define DAC_CHANNEL2_SUPPORT</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renaming -of EXTI_RTSR_TRx into EXTI_RTSR_RTx with x = {0,..22}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renaming -of EXTI_FTSR_TRx into EXTI_FTSR_FTx with </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">x -= {0,..22}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renaming -of EXTI_SWIER_SWIERx into EXTI_SWIER_SWIx </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">with -</big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">x -= {0,..22}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renaming -of EXTI_PR_PRx into EXTI_PR_PIFx </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">with -</big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">x -= {0,..22}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renaming -of RCC_IOPRSTR_GPIOxRST into RCC_IOPRSTR_IOPxRST with x = {A,B,C,D,E,H}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -a new define RCC_AHBRSTR_DMA1RST</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -a new define RCC_APB2RSTR_ADC1RST</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -a new define RCC_APB2RSTR_DBGMCURST</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renaming -of </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">RCC_IOPENR_GPIOxEN -into </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">RCC_IOPENR_IOPxEN </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">with -x = </big></big></span><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">{A,B,C,D,E,H}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -a new define RCC_AHBENR_DMA1EN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -RCC_APB2ENR_MIFIEN into RCC_APB2ENR_FWEN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -RCC_APB2ENR_ADC1EN into RCC_APB2ENR_ADCEN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -RCC_APB2ENR_DBGMCUEN into RCC_APB2ENR_DBGEN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -RCC_IOPSMENR_GPIOxSMEN into RCC_IOPSMENR_IOPxSMEN with x = {A,B,C,D,E,H}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -a new define RCC_AHBSMENR_DMA1SMEN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -RCC_APB2SMENR_ADC1SMEN into RCC_APB2SMENR_ADCSMEN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -RCC_APB2SMENR_DBGMCUSMEN into RCC_APB2SMENR_DBGSMEN</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -new defines TIM_TIM2_REMAP_HSI_SUPPORT and TIM_TIM2_REMAP_HSI48_SUPPORT</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Remove -the following defines : TIM_CR2_CCPC, TIM_CR2_CCUS, - TIM_CR2_OIS1, TIM_CR2_OIS1N, TIM_CR2_OIS2,TIM_CR2_OIS2N, -TIM_CR2_OIS3, TIM_CR2_OIS3N, TIM_CR2_OIS4</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Remove -TIM_SR_COMIF and TIM_SR_BIF</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Remove TIM_EGR_COMG -and TIM_EGR_BG</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Remove -TIM_CCER_CC1NE, TIM_CCER_CC2NE and TIM_CCER_CC3NE</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Remove -TIM_RCR_REP</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -USART_ISR_LBD into USART_ISR_LBDF</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -WWDG_CR_Tx into WWDG_CR_T_x with x = {0,..6}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -WWDG_CFR_WDGTBx into WWDG_CFR_WDGTB_x with x = {0,1}</big></big></span></li><li><span style="color: black; font-family: "Verdana","sans-serif"; font-size: 10pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -several macros to check Timer instances (For exemple -IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(),IS_TIM_CLOCK_DIVISION_INSTANCE(), -etc..)<br> -</big></big></span></li></ul></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";">V1.4.0 -/ 16-October-2015</big></big></span></h3> -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -</big> -</big><ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Update -all the files to support STM32L011xx and STM32L021xx.</big></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Remove -the Debug Monitor handler from the startup files (not supported on L0).</big></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Renamings -and usage of some aliases in order to be compliant with the RefManuals.<br> -</big></big></big></li></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";">V1.3.0 -/ 9-Sept-2015</big></big></span></h3> -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<br> -</span></u></b> -</big> -</big><ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Update -all the files to support STM32L031xx and STM32L041xx.</big></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Several -renamings in order to be compliant with the specifications.<br> -</big></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Adding -of new bit definitions (COMP_CSR_COMP2LPTIM1IN1, -SYSCFG_CFGR1_UFB, I2C_OAR2_x, LCD_CR_MUX_SEG, RTC_BKP_NUMBER)</big></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Update -of several registers and structures (CRC_TypeDef, TIM_TypeDef)<br> -</big></big></big></li></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";">V1.2.0 -/ 6-February-2015</big></big></span></h3> -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><br> -<br> -</span></u></b> -</big> -</big><ul><li style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added -the set of CMSIS files for the STM32L07xx and STM32L08xx family and the -set of startup files for IAR/Keil/Atollic IDEs<span style="font-size: 10pt; color: windowtext;"></span></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><small><small><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -IAR set of fil<span style="font-family: Verdana;">es S</span>TM32L073xx -- STM32L072xx - STM32L071xx - STM32L083xx - STM32L082xx - STM32L081xx</span></small></small></big></big></li></ul> -<ul><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><small><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added -MDK-ARM startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</span></small></big></big></li><li><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><small><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Added -Atollic startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</span></small></big></big></li></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";">V1.1.0 -/ 18-June-2014</big></big></span></h3> -<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<o:p></o:p></span></u></b></big></big></p> -<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Header -files<br> -</big></big></span></p> -</li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -defines for memories -base and end addresses: <span style="font-style: italic;">FLASH_END</span>, <span style="font-style: italic;">DATA_EEPROM_BASE</span> -and <span style="font-style: italic;">DATA_EEPROM_END</span> -(instead of having them in stm32l0xx_hal_flash.h -file)</big></big></span><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><br> -<span style="font-size: 10pt; line-height: 115%; font-family: "Verdana","sans-serif"; color: windowtext;"></span></big></big></li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; line-height: 115%; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Peripheral -register structures definition is aligned on 32 bit<br> -</big></big></span></li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><span style="font-style: italic;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">FLASH_SR_FWWER</big></big></span> -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">value -fixed to 0x00020000 instead of 0x00010000</big></big></span></p> -</li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Add -missing EXTI register bits definition<br> -</big></big></span></p> -</li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">IMR -and EMR registers: bits 18, 20, 26, 28, 29</big></big></span></li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">FTSR, -RTSR, PR and SWIER registers: bits 20, 21, 22</big></big></span></li></ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Update -some bits definition to be in line with latest version of the Reference -Manual</big></big></span></p> -</li></ul><ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -<span style="font-style: italic;">FLASH_SR_ENHV</span> -into <span style="font-style: italic;">FLASH_SR_ENDHV</span></big></big></span><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"> -<big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><br> -</big></big></span></p> -</li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -<span style="font-style: italic;">SYSCFG_VREFINT_ADC_RDYF</span> -into <span style="font-style: italic;">SYSCFG_CFGR3_VREFINT_ADC_RDYF</span><br> -</big></big></span></p> -</li></ul><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -<span style="font-style: italic;">ADC_SMPR_SMPR</span>_xxx -into <span style="font-style: italic;">ADC_SMPR_SMP_xxx</span></big></big></span></p> -</li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Rename -<span style="font-style: italic;">SYSCFG_CFGR3_VREFINT_ADC_RDYF</span> -into <span style="font-style: italic;">SYSCFG_VREFINT_ADC_RDYF</span></big></big></span></li><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; line-height: 115%; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Note: -aliases has been added to keep compatibility with previous version</big></big></span></li></ul></ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; line-height: 115%; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">system_stm32l0xx.c</big></big></span></p> -</li><ul><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"> -<p class="MsoNormal" style="line-height: normal;"><span style="font-size: 10pt; line-height: 115%; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Use -“__IO const” instead of -“__I”, to avoid any compilation issue when __cplusplus switch is defined</big></big></span></p> -</li></ul></ul> -<span style="font-size: 10pt; font-family: Verdana;"></span> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";">V1.0.1 -/ 24-April-2014</big></big></span></h3> -<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<o:p></o:p></span></u></b></big></big></p> -<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: Verdana;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">Update -gcc -startup files.</big></big></span></li></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px; color: white;"><span style="font-size: 10pt; font-family: Arial;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";"><big style="font-size: 10pt; font-family: "Verdana","sans-serif";">V1.0.0 -/ 22-April-2014</big></big></span></h3> -<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<o:p></o:p></span></u></b></big></big></p> -<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="margin: 4.5pt 0in; font-size: 12pt; font-family: 'Times New Roman',serif; color: black;"><span style="font-size: 10pt; font-family: Verdana;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;"><big style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: windowtext;">First -official release.</big></big></span></li></ul><br> -</div> -<div id="product_doc" class="topic1"> -<hr> -<p style="text-align: center;">For complete -documentation on STM32 Microcontrollers<span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: black;"></span><span style="font-size: 10pt; font-family: "Verdana","sans-serif";"><span style="color: black;"></span></span>, -visit: <a href="http://www.st.com/STM32" target="_blank">www.st.com/STM32</a></p> -<br> +<!DOCTYPE html> +<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> +<head> + <meta charset="utf-8" /> + <meta name="generator" content="pandoc" /> + <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" /> + <title>Release Notes for STM32L0xx CMSIS</title> + <style type="text/css"> + code{white-space: pre-wrap;} + span.smallcaps{font-variant: small-caps;} + span.underline{text-decoration: underline;} + div.column{display: inline-block; vertical-align: top; width: 50%;} + </style> + <link rel="stylesheet" href="_htmresc/mini-st.css" /> + <!--[if lt IE 9]> + <script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script> + <![endif]--> +</head> +<body> +<div class="row"> +<div class="col-sm-12 col-lg-4"> +<div class="card fluid"> +<div class="sectione dark"> +<center> +<h1 id="release-notes-for-stm32l0xx-cmsis"><small>Release Notes for</small> <mark>STM32L0xx CMSIS</mark></h1> +<p>Copyright © 2009-2018 ARM Limited - STMicroelectronics<br /> +</p> +<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a> +</center> </div> </div> -</body></html> \ No newline at end of file +<h1 id="license">License</h1> +<p>Licensed by ST under Apache-2.0 license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:</p> +<p><a href="../../../LICENSE.txt">Apache License v2.0</a></p> +<h1 id="purpose">Purpose</h1> +<p>This driver provides the CMSIS device for the stm32l1xx products. This covers:</p> +<ul> +<li>STM32L010xx devices</li> +<li>STM32L011xx and STM32L021xx devices</li> +<li>STM32L031xx and STM32L041xx devices</li> +<li>STM32L051xx, STM32L052xx, STM32L053xx, STM32L062xx and STM32L063xx devices</li> +<li>STM32L071xx, STM32L072xx, STM32L073xx, STM32L082xx and STM32L083xx devices</li> +</ul> +<p>This driver is composed of the descriptions of the registers under “Include” directory.</p> +<p>Various template file are provided to easily build an application. They can be adapted to fit applications requirements.</p> +<ul> +<li>Templates/system_stm32l0xx.c contains the initialization code referred as SystemInit.</li> +<li>Startup files are provided as example for IAR©, KEIL© and SW4STM32©.</li> +<li>Linker files are provided as example for IAR©, KEIL© and SW4STM32©.</li> +</ul> +</div> +<div class="col-sm-12 col-lg-8"> +<h1 id="update-history">Update History</h1> +<div class="collapse"> +<input type="checkbox" id="collapse-section14" aria-hidden="true"> <label for="collapse-section14" aria-hidden="true">V1.9.1 / 28-October-2020</label> +<div> +<h2 id="main-changes">Main Changes</h2> +<h3 id="maintenance-release">Maintenance release</h3> +<h2 id="contents">Contents</h2> +<ul> +<li>system_stm32l0xx.c +<ul> +<li>SystemInit(): update to don’t reset RCC registers to its reset values.</li> +<li>Protect Vector table modification following SRAM or FLASH preprocessor directive by a generic preprocessor directive: USER_VECT_TAB_ADDRESS.</li> +</ul></li> +<li>All header files +<ul> +<li>Remove unused IS_TIM_SYNCHRO_INSTANCE() assert macro.</li> +</ul></li> +<li>Remove stm32l061xx.h header file.</li> +<li>Add License.md and Readme.md files required for GitHub publication</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true">V1.9.0 / 26-October-2018</label> +<div> +<h2 id="main-changes-1">Main Changes</h2> +<h3 id="maintenance-release-1">Maintenance release</h3> +<h3 id="first-release-supporting-l0-value-lines">First release supporting L0 Value Lines</h3> +<h2 id="contents-1">Contents</h2> +<ul> +<li>Add the support of STM32L010xx devices +<ul> +<li>Add stm32l010xb.h, stm32l010x8.h, stm32l010x6.h and stm32l010x4.h device description files</li> +<li>Add startup_stm32l010xb.s, startup_stm32l010x8.s, startup_stm32l010x6.s and startup_stm32l010x4.s startup files for EWARM, MDK-ARM and SW4STM32 toolchains</li> +<li>Add EWARM associated linker files for execution from internal RAM or internal FLASH</li> +</ul></li> +<li>stm32l0xx.h +<ul> +<li>Add the following device defines: +<ul> +<li>“#define STM32L010xB” for all STM32L010xB devices</li> +<li>“#define STM32L010x8” for all STM32L010x8 devices</li> +<li>“#define STM32L010x6” for all STM32L010x6 devices</li> +<li>“#define STM32L010x4” for all STM32L010x4 devices</li> +</ul></li> +<li>Align ErrorStatus typedef to common error handling.</li> +</ul></li> +<li>All stm32l0xxxx.h device description files.h +<ul> +<li>[MISRAC2012-Rule-10.6] Use ‘UL’ postfix for _Msk definitions and memory/peripheral base addresses</li> +<li>Correct comments in the bit definition of RCC_AHBRST, RCC_APB2RSTR and RCC_APB1RSTR registers.</li> +<li>Rename RTC_CR_BCK bit to RTC_CR_BKP to be aligned with reference manual.</li> +<li>Add missing definition of IS_TSC_ALL_INSTANCE after TSC driver update.</li> +<li>Add back the bit definition of SYSCFG_CFGR3_EN_VREFINT in SYSCFG_CFGR3 register.</li> +<li>Rename GPIO_AFRL_AFRLx and GPIO_AFRL_AFRHx bit definitions (from GPIO_AFRL/AFRH registers) to GPIO_AFRL_AFSELx.</li> +<li>Align IS_TIM_XXX_INSTANCE definitions with other series.</li> +<li>Remove cast (uint8_t) in CRC_IDR_IDR definition.</li> +<li>Add missing definition of IS_PCD_ALL_INSTANCE macro after USB driver update.</li> +<li>Add definition of IS_UART_DRIVER_ENABLE_INSTANCE macro after UART driver update.</li> +<li>Add compatibility definition of USART_ICR_NECF / USART_ICR_NCF with others series.</li> +<li>Update IS_UART_INSTANCE macro definition.</li> +<li>Add definition of IS_LPTIM_ENCODER_INTERFACE_INSTANCE macro after LPTIM driver update.</li> +<li>Move definition of FLASH_BANK2_BASE start address to stm32l0xx_hal_flash.h to be dependant on Memory Size register.</li> +<li>Update interrupt definition to use DMA1_Channel4_5_IRQn for STM32L011xx and STM32L021xx devices.</li> +<li>Correct PWR_WAKEUP_PIN definitions for L011xx and L021xx devices.</li> +</ul></li> +<li>system_stm32l0xx.c +<ul> +<li>Update file to correct comments for VECT_TAB_OFFSET definition.</li> +<li>Update default MSI_VALUE reset value set in SystemCoreClock.</li> +<li>Update SystemCoreClockUpdate() function to check HSI16DIVF for HSI divided by 4.</li> +</ul></li> +<li>startup_stm32l0xxxx.s +<ul> +<li>Update startup files to use DMA1_Channel4_5_IRQn/IRQHandler for STM32L011xx and STM32L01xx devices.</li> +</ul></li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V1.8.0 / 12-January-2018</label> +<div> +<h2 id="main-changes-2">Main Changes</h2> +<h3 id="internal-release">Internal release</h3> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true">V1.7.2 / 25-August-2017</label> +<div> +<h2 id="main-changes-3">Main Changes</h2> +<h3 id="maintenance-release-2">Maintenance release</h3> +<h2 id="contents-2">Contents</h2> +<ul> +<li>Removed DATE and VERSION fields from header files.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true">V1.7.1 / 25-November-2016</label> +<div> +<h2 id="main-changes-4">Main Changes</h2> +<h3 id="maintenance-release-3">Maintenance release</h3> +<h2 id="contents-3">Contents</h2> +<ul> +<li>Updated IS_COMP_COMMON_INSTANCE() macro.</li> +<li>Corrected ADC_CFGR2_TOVS bit and mask definitions.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">V1.7.0 / 31-May-2016</label> +<div> +<h2 id="main-changes-5">Main Changes</h2> +<h3 id="maintenance-release-4">Maintenance release</h3> +<h2 id="contents-4">Contents</h2> +<ul> +<li>Added Pos and Msk macros missing within the CMSIS stm32l083xx.h file.</li> +<li>Added LCD_CR_BUFEN bit definition in LCD CR register for stm32l053xx, stm32l063xx, stm32l073xx, stm32l083xx devices.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">V1.6.0 / 15-April-2016</label> +<div> +<h2 id="main-changes-6">Main Changes</h2> +<h3 id="maintenance-release-5">Maintenance release</h3> +<h2 id="contents-5">Contents</h2> +<ul> +<li>Add Pos and Msk macros within the CMSIS files. +<ul> +<li>For example, on the previous CMSIS version (V1.5.0), the constant ADC_IER_EOCALIE was defined as follow : +<ul> +<li>#define ADC_IER_EOCALIE ((uint32_t)0x00000800U)</li> +</ul></li> +<li>On this new CMSIS version (V1.6.0), the constant ADC_IER_EOCALIE is now defined as follow : +<ul> +<li>#define ADC_IER_EOCALIE_Pos (11U)</li> +<li>#define ADC_IER_EOCALIE_Msk (0x1U << ADC_IER_EOCALIE_Pos)</li> +<li>#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk</li> +</ul></li> +<li>The same rule applies on all the other constants present inside the CMSIS files.</li> +</ul></li> +<li><p>MISRA C 2004 rule 10.6 compliancy. (A ‘U’ suffix shall be applied to all constants of unisgned type).</p></li> +<li>Several SYSCFG definition changes :</li> +<li>SYSCFG_CFGR3_EN_VREFINT enable bit suppressed. (no more needed and must not be used).</li> +<li>SYSCFG_CFGR3_EN_BGAP define suppressed.</li> +<li>SYSCFG_CFGR3_REF_HSI48_RDYF, SYSCFG_CFGR3_SENSOR_ADC_RDYF, SYSCFG_CFGR3_VREFINT_ADC_RDYF, SYSCFG_CFGR3_VREFINT_COMP_RDYF flags suppressed, SYSCFG_CFGR3_VREFINT_RDYF must be used instead (this flag is a combination of the 4 suppressed flags).</li> +<li><p>Added SYSCFG_CFGR3_REF_RC48MHz_RDYF, SYSCFG_CFGR3_REF_HSI48_RDYF, SYSCFG_VREFINT_ADC_RDYF, SYSCFG_CFGR3_SENSOR_ADC_RDYF, SYSCFG_CFGR3_VREFINT_ADC_RDYF and SYSCFG_CFGR3_VREFINT_COMP_RDYF defines.</p></li> +<li>Aligned register namings with the different L0 Reference Manual (For STM32L0x1 : RM0377 Rev5, for STM32L0x2 : RM0367 Rev2, for STM32L0x3 : RM0367 Rev4). The list of the modification is listed hereafter : +<ul> +<li>Introduced new masks in EXTI bit definitions in order to simplify LL source code.</li> +<li>Renamed RCC_CFGR_MCO_x into RCC_CFGR_MCOSEL_x</li> +<li>Added FLASHSIZE_BASE, UID_BASE and SRAM_SIZE_MAX defines.</li> +<li>Renamed macro IS_DMA_ALL_INSTANCE() to IS_DMA_STREAM_ALL_INSTANCE().</li> +<li>Added new macros: IS_I2C_WAKEUP_FROMSTOP_INSTANCE(), IS_ADC_COMMON_INSTANCE() and IS_LPUART_INSTANCE().</li> +<li>Added new defines PWR_PVD_SUPPORT to handle the PVD feature.</li> +<li>Corrected the value of FLASH_END for STM32L011xx or STM32L021xx devices.</li> +</ul></li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">V1.5.0 / 8-January-2016</label> +<div> +<h2 id="main-changes-7">Main Changes</h2> +<h3 id="maintenance-release-6">Maintenance release</h3> +<h2 id="contents-6">Contents</h2> +<ul> +<li>MISRA C 2004 rule 5.1 and rule 10.6 compliancy.</li> +<li>Several renaming in order to be aligned with the Reference Manual.The list of the modification is listed hereafter : +<ul> +<li>Adding of a new COMP_Common_TypeDef structure.</li> +<li>Removal of the RCR field inside the TIM_TypeDef structure.</li> +<li>Adding of a new define COMP12_COMMON</li> +<li>Adding of a new define DAC1 (same as DAC)</li> +<li>Adding of a new define ADC1_COMMON</li> +<li>Adding of a new define ADC_CHSELR_CHSEL</li> +<li>Adding of a new define COMP_CSR_WINMODE</li> +<li>Adding of a new define DAC_CHANNEL2_SUPPORT</li> +<li>Renaming of EXTI_RTSR_TRx into EXTI_RTSR_RTx with x = {0,..22}</li> +<li>Renaming of EXTI_FTSR_TRx into EXTI_FTSR_FTx with x = {0,..22}</li> +<li>Renaming of EXTI_SWIER_SWIERx into EXTI_SWIER_SWIx with x = {0,..22}</li> +<li>Renaming of EXTI_PR_PRx into EXTI_PR_PIFx with x = {0,..22}</li> +<li>Renaming of RCC_IOPRSTR_GPIOxRST into RCC_IOPRSTR_IOPxRST with x = {A,B,C,D,E,H}</li> +<li>Add a new define RCC_AHBRSTR_DMA1RST</li> +<li>Add a new define RCC_APB2RSTR_ADC1RST</li> +<li>Add a new define RCC_APB2RSTR_DBGMCURST</li> +<li>Renaming of RCC_IOPENR_GPIOxEN into RCC_IOPENR_IOPxEN with x = {A,B,C,D,E,H}</li> +<li>Add a new define RCC_AHBENR_DMA1EN</li> +<li>Rename RCC_APB2ENR_MIFIEN into RCC_APB2ENR_FWEN</li> +<li>Rename RCC_APB2ENR_ADC1EN into RCC_APB2ENR_ADCEN</li> +<li>Rename RCC_APB2ENR_DBGMCUEN into RCC_APB2ENR_DBGEN</li> +<li>Rename RCC_IOPSMENR_GPIOxSMEN into RCC_IOPSMENR_IOPxSMEN with x = {A,B,C,D,E,H}</li> +<li>Add a new define RCC_AHBSMENR_DMA1SMEN</li> +<li>Rename RCC_APB2SMENR_ADC1SMEN into RCC_APB2SMENR_ADCSMEN</li> +<li>Rename RCC_APB2SMENR_DBGMCUSMEN into RCC_APB2SMENR_DBGSMEN</li> +<li>Add new defines TIM_TIM2_REMAP_HSI_SUPPORT and TIM_TIM2_REMAP_HSI48_SUPPORT</li> +<li>Remove the following defines : TIM_CR2_CCPC, TIM_CR2_CCUS, TIM_CR2_OIS1, TIM_CR2_OIS1N, TIM_CR2_OIS2,TIM_CR2_OIS2N, TIM_CR2_OIS3, TIM_CR2_OIS3N, TIM_CR2_OIS4</li> +<li>Remove TIM_SR_COMIF and TIM_SR_BIF</li> +<li>Remove TIM_EGR_COMG and TIM_EGR_BG</li> +<li>Remove TIM_CCER_CC1NE, TIM_CCER_CC2NE and TIM_CCER_CC3NE</li> +<li>Remove TIM_RCR_REP</li> +<li>Rename USART_ISR_LBD into USART_ISR_LBDF</li> +<li>Rename WWDG_CR_Tx into WWDG_CR_T_x with x = {0,..6}</li> +<li>Rename WWDG_CFR_WDGTBx into WWDG_CFR_WDGTB_x with x = {0,1}</li> +<li>Add several macros to check Timer instances (IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(), IS_TIM_CLOCK_DIVISION_INSTANCE(), …)</li> +</ul></li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.4.0 / 16-October-2015</label> +<div> +<h2 id="main-changes-8">Main Changes</h2> +<h3 id="maintenance-release-7">Maintenance release</h3> +<ul> +<li>Update all the files to support STM32L011xx and STM32L021xx.</li> +</ul> +<h2 id="contents-7">Contents</h2> +<ul> +<li>Remove the Debug Monitor handler from the startup files (not supported on L0).</li> +<li>Renamings and usage of some aliases in order to be compliant with the RefManuals.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.3.0 / 9-Sept-2015</label> +<div> +<h2 id="main-changes-9">Main Changes</h2> +<h3 id="maintenance-release-8">Maintenance release</h3> +<ul> +<li>Update all the files to support <strong>STM32L031xx</strong> and <strong>STM32L041xx</strong>.</li> +</ul> +<h2 id="contents-8">Contents</h2> +<ul> +<li>Several renamings in order to be compliant with the specifications.</li> +<li>Adding of new bit definitions (COMP_CSR_COMP2LPTIM1IN1, SYSCFG_CFGR1_UFB, I2C_OAR2_x, LCD_CR_MUX_SEG, RTC_BKP_NUMBER)</li> +<li>Update of several registers and structures (CRC_TypeDef, TIM_TypeDef)</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">V1.2.0 / 6-February-2015</label> +<div> +<h2 id="main-changes-10">Main Changes</h2> +<h3 id="maintenance-release-9">Maintenance release</h3> +<ul> +<li>Added the set of CMSIS files for the <strong>STM32L07xx</strong> and <strong>STM32L08xx</strong> family</li> +</ul> +<h2 id="contents-9">Contents</h2> +<ul> +<li>Add IAR set of files STM32L073xx - STM32L072xx - STM32L071xx - STM32L083xx - STM32L082xx - STM32L081xx</li> +<li>Added MDK-ARM startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</li> +<li>Added Atollic startup files for L071xx, L072xx, L073xx, L081xx, L082xx, L083xx</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.1.0 / 18-June-2014</label> +<div> +<h2 id="main-changes-11">Main Changes</h2> +<h3 id="maintenance-release-10">Maintenance release</h3> +<h2 id="contents-10">Contents</h2> +<ul> +<li><strong>Header files</strong> +<ul> +<li>Add defines for memories base and end addresses: +<ul> +<li>FLASH_END, DATA_EEPROM_BASE and DATA_EEPROM_END (instead of having them in stm32l0xx_hal_flash.h file)</li> +</ul></li> +<li>Peripheral register structures definition is aligned on 32 bit</li> +<li>FLASH_SR_FWWER value fixed to 0x00020000 instead of 0x00010000</li> +<li>Add missing EXTI register bits definition +<ul> +<li>IMR and EMR registers: bits 18, 20, 26, 28, 29</li> +<li>FTSR, RTSR, PR and SWIER registers: bits 20, 21, 22</li> +</ul></li> +<li>Update some bits definition to be in line with latest version of the Reference Manual +<ul> +<li>Rename FLASH_SR_ENHV into FLASH_SR_ENDHV</li> +<li>Rename SYSCFG_VREFINT_ADC_RDYF into SYSCFG_CFGR3_VREFINT_ADC_RDYF</li> +<li>Rename ADC_SMPR_SMPR_xxx into ADC_SMPR_SMP_xxx</li> +<li>Rename SYSCFG_CFGR3_VREFINT_ADC_RDYF into SYSCFG_VREFINT_ADC_RDYF Note: aliases has been added to keep compatibility with previous version</li> +</ul></li> +</ul></li> +<li><strong>system_stm32l0xx.c</strong> +<ul> +<li>Use "__IO const" instead of "__I", to avoid any compilation issue when __cplusplus switch is defined</li> +</ul></li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.0.1 / 24-April-2014</label> +<div> +<h2 id="main-changes-12">Main Changes</h2> +<h3 id="first-official-release">First official release</h3> +<h2 id="contents-11">Contents</h2> +<ul> +<li>Update gcc startup files</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 22-April-2014</label> +<div> +<h2 id="main-changes-13">Main Changes</h2> +<h3 id="first-official-release-1">First official release</h3> +</div> +</div> +</div> +</div> +<footer class="sticky"> +For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <a href="http://www.st.com/STM32">http://www.st.com/STM32</a> +</footer> +</body> +</html>
diff --git a/Source/Templates/arm/startup_stm32l010x4.s b/Source/Templates/arm/startup_stm32l010x4.s index 7616103..1045ba4 100644 --- a/Source/Templates/arm/startup_stm32l010x4.s +++ b/Source/Templates/arm/startup_stm32l010x4.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l010x4.s ;* Author : MCD Application Team ;* Description : STM32l010x4 Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l010x6.s b/Source/Templates/arm/startup_stm32l010x6.s index 4885dee..18c1cd4 100644 --- a/Source/Templates/arm/startup_stm32l010x6.s +++ b/Source/Templates/arm/startup_stm32l010x6.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l010x6.s ;* Author : MCD Application Team ;* Description : STM32l010x6 Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l010x8.s b/Source/Templates/arm/startup_stm32l010x8.s index ef0b741..a905357 100644 --- a/Source/Templates/arm/startup_stm32l010x8.s +++ b/Source/Templates/arm/startup_stm32l010x8.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l010x8.s ;* Author : MCD Application Team ;* Description : STM32l010x8 Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l010xb.s b/Source/Templates/arm/startup_stm32l010xb.s index 3ec803c..2dd2bd9 100644 --- a/Source/Templates/arm/startup_stm32l010xb.s +++ b/Source/Templates/arm/startup_stm32l010xb.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l010xb.s ;* Author : MCD Application Team ;* Description : STM32l010xB Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l011xx.s b/Source/Templates/arm/startup_stm32l011xx.s index 0b2a6cb..fadd9f5 100644 --- a/Source/Templates/arm/startup_stm32l011xx.s +++ b/Source/Templates/arm/startup_stm32l011xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l011xx.s ;* Author : MCD Application Team ;* Description : STM32l011xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l021xx.s b/Source/Templates/arm/startup_stm32l021xx.s index fe90ca0..2af109a 100644 --- a/Source/Templates/arm/startup_stm32l021xx.s +++ b/Source/Templates/arm/startup_stm32l021xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l021xx.s ;* Author : MCD Application Team ;* Description : STM32l021xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l031xx.s b/Source/Templates/arm/startup_stm32l031xx.s index fdbaf5c..fa81906 100644 --- a/Source/Templates/arm/startup_stm32l031xx.s +++ b/Source/Templates/arm/startup_stm32l031xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l031xx.s ;* Author : MCD Application Team ;* Description : STM32l031xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l041xx.s b/Source/Templates/arm/startup_stm32l041xx.s index afa0b6d..70bf5d5 100644 --- a/Source/Templates/arm/startup_stm32l041xx.s +++ b/Source/Templates/arm/startup_stm32l041xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l041xx.s ;* Author : MCD Application Team ;* Description : STM32l041xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l051xx.s b/Source/Templates/arm/startup_stm32l051xx.s index f88c941..f84eeea 100644 --- a/Source/Templates/arm/startup_stm32l051xx.s +++ b/Source/Templates/arm/startup_stm32l051xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l051xx.s ;* Author : MCD Application Team ;* Description : STM32l051xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l052xx.s b/Source/Templates/arm/startup_stm32l052xx.s index 8781d5c..06c1775 100644 --- a/Source/Templates/arm/startup_stm32l052xx.s +++ b/Source/Templates/arm/startup_stm32l052xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l052xx.s ;* Author : MCD Application Team ;* Description : STM32l052xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l053xx.s b/Source/Templates/arm/startup_stm32l053xx.s index 8fcc356..fa9f6fd 100644 --- a/Source/Templates/arm/startup_stm32l053xx.s +++ b/Source/Templates/arm/startup_stm32l053xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l053xx.s ;* Author : MCD Application Team ;* Description : STM32l053xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l061xx.s b/Source/Templates/arm/startup_stm32l061xx.s deleted file mode 100644 index 95082e1..0000000 --- a/Source/Templates/arm/startup_stm32l061xx.s +++ /dev/null
@@ -1,253 +0,0 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** -;* File Name : startup_stm32l061xx.s -;* Author : MCD Application Team -;* Description : STM32l061xx Devices vector table for MDK-ARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the Cortex-M0+ processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. -;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;* -;******************************************************************************* -; -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD RTC_IRQHandler ; RTC through EXTI Line - DCD FLASH_IRQHandler ; FLASH - DCD RCC_IRQHandler ; RCC - DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 - DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 - DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 - DCD 0 ; Reserved - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 - DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 - DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 - DCD LPTIM1_IRQHandler ; LPTIM1 - DCD 0 ; Reserved - DCD TIM2_IRQHandler ; TIM2 - DCD 0 ; Reserved - DCD TIM6_IRQHandler ; TIM6 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM21_IRQHandler ; TIM21 - DCD 0 ; Reserved - DCD TIM22_IRQHandler ; TIM22 - DCD I2C1_IRQHandler ; I2C1 - DCD I2C2_IRQHandler ; I2C2 - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD AES_LPUART1_IRQHandler ; AES and LPUART1 - DCD 0 ; Reserved - DCD 0 ; Reserved - -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler routine -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_1_IRQHandler [WEAK] - EXPORT EXTI2_3_IRQHandler [WEAK] - EXPORT EXTI4_15_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK] - EXPORT ADC1_COMP_IRQHandler [WEAK] - EXPORT LPTIM1_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM21_IRQHandler [WEAK] - EXPORT TIM22_IRQHandler [WEAK] - EXPORT I2C1_IRQHandler [WEAK] - EXPORT I2C2_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT AES_LPUART1_IRQHandler [WEAK] - - - -WWDG_IRQHandler -PVD_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_1_IRQHandler -EXTI2_3_IRQHandler -EXTI4_15_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_3_IRQHandler -DMA1_Channel4_5_6_7_IRQHandler -ADC1_COMP_IRQHandler -LPTIM1_IRQHandler -TIM2_IRQHandler -TIM6_IRQHandler -TIM21_IRQHandler -TIM22_IRQHandler -I2C1_IRQHandler -I2C2_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -AES_LPUART1_IRQHandler - - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/Source/Templates/arm/startup_stm32l062xx.s b/Source/Templates/arm/startup_stm32l062xx.s index e836c9c..69c5210 100644 --- a/Source/Templates/arm/startup_stm32l062xx.s +++ b/Source/Templates/arm/startup_stm32l062xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l062xx.s ;* Author : MCD Application Team ;* Description : STM32l062xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l063xx.s b/Source/Templates/arm/startup_stm32l063xx.s index 2525133..724bc85 100644 --- a/Source/Templates/arm/startup_stm32l063xx.s +++ b/Source/Templates/arm/startup_stm32l063xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l063xx.s ;* Author : MCD Application Team ;* Description : STM32l063xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l071xx.s b/Source/Templates/arm/startup_stm32l071xx.s index 93be51c..64ef67b 100644 --- a/Source/Templates/arm/startup_stm32l071xx.s +++ b/Source/Templates/arm/startup_stm32l071xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l071xx.s ;* Author : MCD Application Team ;* Description : STM32l071xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l072xx.s b/Source/Templates/arm/startup_stm32l072xx.s index a52f4e9..ed130f0 100644 --- a/Source/Templates/arm/startup_stm32l072xx.s +++ b/Source/Templates/arm/startup_stm32l072xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l072xx.s ;* Author : MCD Application Team ;* Description : STM32l072xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l073xx.s b/Source/Templates/arm/startup_stm32l073xx.s index f1a401c..fa7c30c 100644 --- a/Source/Templates/arm/startup_stm32l073xx.s +++ b/Source/Templates/arm/startup_stm32l073xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l073xx.s ;* Author : MCD Application Team ;* Description : STM32l073xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l081xx.s b/Source/Templates/arm/startup_stm32l081xx.s index 3612472..6d34a49 100644 --- a/Source/Templates/arm/startup_stm32l081xx.s +++ b/Source/Templates/arm/startup_stm32l081xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l081xx.s ;* Author : MCD Application Team ;* Description : STM32l081xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l082xx.s b/Source/Templates/arm/startup_stm32l082xx.s index e91b549..4f7469e 100644 --- a/Source/Templates/arm/startup_stm32l082xx.s +++ b/Source/Templates/arm/startup_stm32l082xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l082xx.s ;* Author : MCD Application Team ;* Description : STM32l082xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/arm/startup_stm32l083xx.s b/Source/Templates/arm/startup_stm32l083xx.s index 06697e5..a50ee00 100644 --- a/Source/Templates/arm/startup_stm32l083xx.s +++ b/Source/Templates/arm/startup_stm32l083xx.s
@@ -1,4 +1,4 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;****************************************************************************** ;* File Name : startup_stm32l083xx.s ;* Author : MCD Application Team ;* Description : STM32l083xx Devices vector table for MDK-ARM toolchain. @@ -10,32 +10,19 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************* -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;****************************************************************************** +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. ;* -;******************************************************************************* -; +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; <h> Stack Configuration
diff --git a/Source/Templates/gcc/startup_stm32l010x4.s b/Source/Templates/gcc/startup_stm32l010x4.s index 5706c9e..66c8d7d 100644 --- a/Source/Templates/gcc/startup_stm32l010x4.s +++ b/Source/Templates/gcc/startup_stm32l010x4.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -86,34 +73,35 @@ ApplicationStart: /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l010x6.s b/Source/Templates/gcc/startup_stm32l010x6.s index b274a9f..c851276 100644 --- a/Source/Templates/gcc/startup_stm32l010x6.s +++ b/Source/Templates/gcc/startup_stm32l010x6.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -86,34 +73,35 @@ ApplicationStart: /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l010x8.s b/Source/Templates/gcc/startup_stm32l010x8.s index 4e44ca3..094bbea 100644 --- a/Source/Templates/gcc/startup_stm32l010x8.s +++ b/Source/Templates/gcc/startup_stm32l010x8.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -86,34 +73,35 @@ ApplicationStart: /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l010xb.s b/Source/Templates/gcc/startup_stm32l010xb.s index 599ceb1..f2da778 100644 --- a/Source/Templates/gcc/startup_stm32l010xb.s +++ b/Source/Templates/gcc/startup_stm32l010xb.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -86,34 +73,35 @@ ApplicationStart: /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l011xx.s b/Source/Templates/gcc/startup_stm32l011xx.s index e4708b0..17c4da7 100644 --- a/Source/Templates/gcc/startup_stm32l011xx.s +++ b/Source/Templates/gcc/startup_stm32l011xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -86,34 +73,35 @@ ApplicationStart: /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l021xx.s b/Source/Templates/gcc/startup_stm32l021xx.s index dd80383..0ef0e74 100644 --- a/Source/Templates/gcc/startup_stm32l021xx.s +++ b/Source/Templates/gcc/startup_stm32l021xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -86,34 +73,35 @@ ApplicationStart: /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l031xx.s b/Source/Templates/gcc/startup_stm32l031xx.s index 249fb41..e2fc165 100644 --- a/Source/Templates/gcc/startup_stm32l031xx.s +++ b/Source/Templates/gcc/startup_stm32l031xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l041xx.s b/Source/Templates/gcc/startup_stm32l041xx.s index 7dfeedd..79fb5e1 100644 --- a/Source/Templates/gcc/startup_stm32l041xx.s +++ b/Source/Templates/gcc/startup_stm32l041xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l051xx.s b/Source/Templates/gcc/startup_stm32l051xx.s index f10ef9d..c663b83 100644 --- a/Source/Templates/gcc/startup_stm32l051xx.s +++ b/Source/Templates/gcc/startup_stm32l051xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l052xx.s b/Source/Templates/gcc/startup_stm32l052xx.s index 37a1278..3f13e1d 100644 --- a/Source/Templates/gcc/startup_stm32l052xx.s +++ b/Source/Templates/gcc/startup_stm32l052xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l053xx.s b/Source/Templates/gcc/startup_stm32l053xx.s index 066e208..2b3ac52 100644 --- a/Source/Templates/gcc/startup_stm32l053xx.s +++ b/Source/Templates/gcc/startup_stm32l053xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l061xx.s b/Source/Templates/gcc/startup_stm32l061xx.s deleted file mode 100644 index bed483f..0000000 --- a/Source/Templates/gcc/startup_stm32l061xx.s +++ /dev/null
@@ -1,284 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32l061xx.s - * @author MCD Application Team - * @brief STM32L061xx Devices vector table for GCC toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M0+ processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m0plus - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2] - adds r2, r2, #4 - - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - -LoopForever: - b LoopForever - - -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M0. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word 0 - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler /* Window WatchDog */ - .word PVD_IRQHandler /* PVD through EXTI Line detection */ - .word RTC_IRQHandler /* RTC through the EXTI line */ - .word FLASH_IRQHandler /* FLASH */ - .word RCC_IRQHandler /* RCC */ - .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ - .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ - .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ - .word 0 /* Reserved */ - .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ - .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ - .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/ - .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ - .word LPTIM1_IRQHandler /* LPTIM1 */ - .word 0 /* Reserved */ - .word TIM2_IRQHandler /* TIM2 */ - .word 0 /* Reserved */ - .word TIM6_IRQHandler /* TIM6 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - .word TIM21_IRQHandler /* TIM21 */ - .word 0 /* Reserved */ - .word TIM22_IRQHandler /* TIM22 */ - .word I2C1_IRQHandler /* I2C1 */ - .word I2C2_IRQHandler /* I2C2 */ - .word SPI1_IRQHandler /* SPI1 */ - .word SPI2_IRQHandler /* SPI2 */ - .word USART1_IRQHandler /* USART1 */ - .word USART2_IRQHandler /* USART2 */ - .word AES_LPUART1_IRQHandler /* AES and LPUART1 */ - .word 0 /* Reserved */ - .word 0 /* Reserved */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_1_IRQHandler - .thumb_set EXTI0_1_IRQHandler,Default_Handler - - .weak EXTI2_3_IRQHandler - .thumb_set EXTI2_3_IRQHandler,Default_Handler - - .weak EXTI4_15_IRQHandler - .thumb_set EXTI4_15_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_3_IRQHandler - .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_5_6_7_IRQHandler - .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler - - .weak ADC1_COMP_IRQHandler - .thumb_set ADC1_COMP_IRQHandler,Default_Handler - - .weak LPTIM1_IRQHandler - .thumb_set LPTIM1_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM21_IRQHandler - .thumb_set TIM21_IRQHandler,Default_Handler - - .weak TIM22_IRQHandler - .thumb_set TIM22_IRQHandler,Default_Handler - - .weak I2C1_IRQHandler - .thumb_set I2C1_IRQHandler,Default_Handler - - .weak I2C2_IRQHandler - .thumb_set I2C2_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak AES_LPUART1_IRQHandler - .thumb_set AES_LPUART1_IRQHandler,Default_Handler - - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -
diff --git a/Source/Templates/gcc/startup_stm32l062xx.s b/Source/Templates/gcc/startup_stm32l062xx.s index 2005732..0bbf8b8 100644 --- a/Source/Templates/gcc/startup_stm32l062xx.s +++ b/Source/Templates/gcc/startup_stm32l062xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l063xx.s b/Source/Templates/gcc/startup_stm32l063xx.s index ed76586..7d16e33 100644 --- a/Source/Templates/gcc/startup_stm32l063xx.s +++ b/Source/Templates/gcc/startup_stm32l063xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l071xx.s b/Source/Templates/gcc/startup_stm32l071xx.s index 4713c5a..43327c5 100644 --- a/Source/Templates/gcc/startup_stm32l071xx.s +++ b/Source/Templates/gcc/startup_stm32l071xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l072xx.s b/Source/Templates/gcc/startup_stm32l072xx.s index 9edffa4..7a58897 100644 --- a/Source/Templates/gcc/startup_stm32l072xx.s +++ b/Source/Templates/gcc/startup_stm32l072xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l073xx.s b/Source/Templates/gcc/startup_stm32l073xx.s index 17b43d9..71269f1 100644 --- a/Source/Templates/gcc/startup_stm32l073xx.s +++ b/Source/Templates/gcc/startup_stm32l073xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l081xx.s b/Source/Templates/gcc/startup_stm32l081xx.s index b01912b..18c0e37 100644 --- a/Source/Templates/gcc/startup_stm32l081xx.s +++ b/Source/Templates/gcc/startup_stm32l081xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l082xx.s b/Source/Templates/gcc/startup_stm32l082xx.s index 1f168fc..adf895e 100644 --- a/Source/Templates/gcc/startup_stm32l082xx.s +++ b/Source/Templates/gcc/startup_stm32l082xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/gcc/startup_stm32l083xx.s b/Source/Templates/gcc/startup_stm32l083xx.s index 2fb796b..662f4c2 100644 --- a/Source/Templates/gcc/startup_stm32l083xx.s +++ b/Source/Templates/gcc/startup_stm32l083xx.s
@@ -12,28 +12,15 @@ * After Reset the Cortex-M0+ processor is in Thread mode, * priority is Privileged, and the Stack is set to Main. ****************************************************************************** - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * @attention * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ @@ -66,34 +53,35 @@ mov sp, r0 /* set stack pointer */ /* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + FillZerobss: - movs r3, #0 str r3, [r2] adds r2, r2, #4 - LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss + cmp r2, r4 + bcc FillZerobss /* Call the clock system intitialization function.*/ bl SystemInit
diff --git a/Source/Templates/iar/startup_stm32l010x4.s b/Source/Templates/iar/startup_stm32l010x4.s index d516d8b..279a453 100644 --- a/Source/Templates/iar/startup_stm32l010x4.s +++ b/Source/Templates/iar/startup_stm32l010x4.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l010x4.s ;* Author : MCD Application Team ;* Description : STM32L010x4 Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l010x6.s b/Source/Templates/iar/startup_stm32l010x6.s index 388bf70..1cc87d5 100644 --- a/Source/Templates/iar/startup_stm32l010x6.s +++ b/Source/Templates/iar/startup_stm32l010x6.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l010x6.s ;* Author : MCD Application Team ;* Description : STM32L010x6 Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l010x8.s b/Source/Templates/iar/startup_stm32l010x8.s index d03113f..a60c725 100644 --- a/Source/Templates/iar/startup_stm32l010x8.s +++ b/Source/Templates/iar/startup_stm32l010x8.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l010x8.s ;* Author : MCD Application Team ;* Description : STM32L010x8 Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l010xb.s b/Source/Templates/iar/startup_stm32l010xb.s index d2545a0..aa3f09a 100644 --- a/Source/Templates/iar/startup_stm32l010xb.s +++ b/Source/Templates/iar/startup_stm32l010xb.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2018 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l010xb.s ;* Author : MCD Application Team ;* Description : STM32L010xB Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l011xx.s b/Source/Templates/iar/startup_stm32l011xx.s index 8417aee..cc3d006 100644 --- a/Source/Templates/iar/startup_stm32l011xx.s +++ b/Source/Templates/iar/startup_stm32l011xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l011xx.s ;* Author : MCD Application Team ;* Description : STM32L011xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l021xx.s b/Source/Templates/iar/startup_stm32l021xx.s index 99c1ce7..caf84d5 100644 --- a/Source/Templates/iar/startup_stm32l021xx.s +++ b/Source/Templates/iar/startup_stm32l021xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l021xx.s ;* Author : MCD Application Team ;* Description : STM32L021xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l031xx.s b/Source/Templates/iar/startup_stm32l031xx.s index f6d5f95..69e3721 100644 --- a/Source/Templates/iar/startup_stm32l031xx.s +++ b/Source/Templates/iar/startup_stm32l031xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l031xx.s ;* Author : MCD Application Team ;* Description : STM32L031xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l041xx.s b/Source/Templates/iar/startup_stm32l041xx.s index a6e61b5..0e35271 100644 --- a/Source/Templates/iar/startup_stm32l041xx.s +++ b/Source/Templates/iar/startup_stm32l041xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l041xx.s ;* Author : MCD Application Team ;* Description : STM32L041xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l051xx.s b/Source/Templates/iar/startup_stm32l051xx.s index fd8254d..551dd45 100644 --- a/Source/Templates/iar/startup_stm32l051xx.s +++ b/Source/Templates/iar/startup_stm32l051xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l051xx.s ;* Author : MCD Application Team ;* Description : STM32L051xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l052xx.s b/Source/Templates/iar/startup_stm32l052xx.s index 654ab71..6622f02 100644 --- a/Source/Templates/iar/startup_stm32l052xx.s +++ b/Source/Templates/iar/startup_stm32l052xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l052xx.s ;* Author : MCD Application Team ;* Description : STM32L052xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l053xx.s b/Source/Templates/iar/startup_stm32l053xx.s index 78b4de4..e353615 100644 --- a/Source/Templates/iar/startup_stm32l053xx.s +++ b/Source/Templates/iar/startup_stm32l053xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l053xx.s ;* Author : MCD Application Team ;* Description : STM32L053xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l061xx.s b/Source/Templates/iar/startup_stm32l061xx.s deleted file mode 100644 index 2100f89..0000000 --- a/Source/Templates/iar/startup_stm32l061xx.s +++ /dev/null
@@ -1,307 +0,0 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** -;* File Name : startup_stm32l061xx.s -;* Author : MCD Application Team -;* Description : STM32L061xx Ultra Low Power Devices vector -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == _iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* - Configure the system clock -;* - Branches to main in the C library (which eventually -;* calls main()). -;* After Reset the Cortex-M0+ processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. -;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;* -;*******************************************************************************/ -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD RTC_IRQHandler ; RTC through EXTI Line - DCD FLASH_IRQHandler ; FLASH - DCD RCC_IRQHandler ; RCC - DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 - DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 - DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 - DCD 0 ; Reserved - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 - DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 - DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 - DCD LPTIM1_IRQHandler ; LPTIM1 - DCD 0 ; Reserved - DCD TIM2_IRQHandler ; TIM2 - DCD 0 ; Reserved - DCD TIM6_IRQHandler ; TIM6 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM21_IRQHandler ; TIM21 - DCD 0 ; Reserved - DCD TIM22_IRQHandler ; TIM22 - DCD I2C1_IRQHandler ; I2C1 - DCD I2C2_IRQHandler ; I2C2 - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD AES_LPUART1_IRQHandler ; AES and LPUART1 - DCD 0 ; Reserved - DCD 0 ; Reserved - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - PUBWEAK Reset_Handler - SECTION .text:CODE:NOROOT:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:NOROOT:REORDER(1) -NMI_Handler - B NMI_Handler - - - PUBWEAK HardFault_Handler - SECTION .text:CODE:NOROOT:REORDER(1) -HardFault_Handler - B HardFault_Handler - - - PUBWEAK SVC_Handler - SECTION .text:CODE:NOROOT:REORDER(1) -SVC_Handler - B SVC_Handler - - - PUBWEAK PendSV_Handler - SECTION .text:CODE:NOROOT:REORDER(1) -PendSV_Handler - B PendSV_Handler - - - PUBWEAK SysTick_Handler - SECTION .text:CODE:NOROOT:REORDER(1) -SysTick_Handler - B SysTick_Handler - - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - - PUBWEAK EXTI0_1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -EXTI0_1_IRQHandler - B EXTI0_1_IRQHandler - - - PUBWEAK EXTI2_3_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -EXTI2_3_IRQHandler - B EXTI2_3_IRQHandler - - - PUBWEAK EXTI4_15_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -EXTI4_15_IRQHandler - B EXTI4_15_IRQHandler - - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - - PUBWEAK DMA1_Channel2_3_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -DMA1_Channel2_3_IRQHandler - B DMA1_Channel2_3_IRQHandler - - - PUBWEAK DMA1_Channel4_5_6_7_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -DMA1_Channel4_5_6_7_IRQHandler - B DMA1_Channel4_5_6_7_IRQHandler - - - PUBWEAK ADC1_COMP_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -ADC1_COMP_IRQHandler - B ADC1_COMP_IRQHandler - - - PUBWEAK LPTIM1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -LPTIM1_IRQHandler - B LPTIM1_IRQHandler - - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM21_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -TIM21_IRQHandler - B TIM21_IRQHandler - - PUBWEAK TIM22_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -TIM22_IRQHandler - B TIM22_IRQHandler - - - PUBWEAK I2C1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -I2C1_IRQHandler - B I2C1_IRQHandler - - - PUBWEAK I2C2_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -I2C2_IRQHandler - B I2C2_IRQHandler - - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - - PUBWEAK AES_LPUART1_IRQHandler - SECTION .text:CODE:NOROOT:REORDER(1) -AES_LPUART1_IRQHandler - B AES_LPUART1_IRQHandler - - END -;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/Source/Templates/iar/startup_stm32l062xx.s b/Source/Templates/iar/startup_stm32l062xx.s index 089e532..fa71383 100644 --- a/Source/Templates/iar/startup_stm32l062xx.s +++ b/Source/Templates/iar/startup_stm32l062xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l062xx.s ;* Author : MCD Application Team ;* Description : STM32L062xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l063xx.s b/Source/Templates/iar/startup_stm32l063xx.s index cee14e8..66cfe20 100644 --- a/Source/Templates/iar/startup_stm32l063xx.s +++ b/Source/Templates/iar/startup_stm32l063xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l063xx.s ;* Author : MCD Application Team ;* Description : STM32L063xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l071xx.s b/Source/Templates/iar/startup_stm32l071xx.s index efaba46..1372dd1 100644 --- a/Source/Templates/iar/startup_stm32l071xx.s +++ b/Source/Templates/iar/startup_stm32l071xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l071xx.s ;* Author : MCD Application Team ;* Description : STM32L071xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l072xx.s b/Source/Templates/iar/startup_stm32l072xx.s index bf5bf94..a6804a1 100644 --- a/Source/Templates/iar/startup_stm32l072xx.s +++ b/Source/Templates/iar/startup_stm32l072xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l072xx.s ;* Author : MCD Application Team ;* Description : STM32L072xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l073xx.s b/Source/Templates/iar/startup_stm32l073xx.s index 1dbc289..fc3b8d2 100644 --- a/Source/Templates/iar/startup_stm32l073xx.s +++ b/Source/Templates/iar/startup_stm32l073xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l073xx.s ;* Author : MCD Application Team ;* Description : STM32L073xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l081xx.s b/Source/Templates/iar/startup_stm32l081xx.s index a6dbe42..e906833 100644 --- a/Source/Templates/iar/startup_stm32l081xx.s +++ b/Source/Templates/iar/startup_stm32l081xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l081xx.s ;* Author : MCD Application Team ;* Description : STM32L081xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l082xx.s b/Source/Templates/iar/startup_stm32l082xx.s index 7156d97..92ce027 100644 --- a/Source/Templates/iar/startup_stm32l082xx.s +++ b/Source/Templates/iar/startup_stm32l082xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l082xx.s ;* Author : MCD Application Team ;* Description : STM32L082xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/iar/startup_stm32l083xx.s b/Source/Templates/iar/startup_stm32l083xx.s index 277712c..c99f5c1 100644 --- a/Source/Templates/iar/startup_stm32l083xx.s +++ b/Source/Templates/iar/startup_stm32l083xx.s
@@ -1,4 +1,4 @@ -;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;******************************************************************************* ;* File Name : startup_stm32l083xx.s ;* Author : MCD Application Team ;* Description : STM32L083xx Ultra Low Power Devices vector @@ -12,31 +12,18 @@ ;* calls main()). ;* After Reset the Cortex-M0+ processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* -;* Redistribution and use in source and binary forms, with or without modification, -;* are permitted provided that the following conditions are met: -;* 1. Redistributions of source code must retain the above copyright notice, -;* this list of conditions and the following disclaimer. -;* 2. Redistributions in binary form must reproduce the above copyright notice, -;* this list of conditions and the following disclaimer in the documentation -;* and/or other materials provided with the distribution. -;* 3. Neither the name of STMicroelectronics nor the names of its contributors -;* may be used to endorse or promote products derived from this software -;* without specific prior written permission. +;******************************************************************************* +;* @attention ;* -;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* <h2><center>© Copyright (c) 2016 STMicroelectronics. +;* All rights reserved.</center></h2> ;* -;*******************************************************************************/ +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* ; ; ; The modules in this file are included in the libraries, and may be replaced
diff --git a/Source/Templates/system_stm32l0xx.c b/Source/Templates/system_stm32l0xx.c index 814b0c7..00a513c 100644 --- a/Source/Templates/system_stm32l0xx.c +++ b/Source/Templates/system_stm32l0xx.c
@@ -77,11 +77,30 @@ */ /************************* Miscellaneous Configuration ************************/ -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in Flash or Sram, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +/*!< Uncomment the following line if you need to relocate your vector Table + in Sram else user remap will be done in Flash. */ /* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x00U /*!< Vector Table base offset field. - This value must be a multiple of 0x100. */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#endif /* VECT_TAB_SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ + /******************************************************************************/ /** * @} @@ -134,37 +153,14 @@ */ void SystemInit (void) { -/*!< Set MSION bit */ - RCC->CR |= (uint32_t)0x00000100U; - - /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */ - RCC->CFGR &= (uint32_t) 0x88FF400CU; - - /*!< Reset HSION, HSIDIVEN, HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFF6U; - - /*!< Reset HSI48ON bit */ - RCC->CRRCR &= (uint32_t)0xFFFFFFFEU; - - /*!< Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFFU; - - /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */ - RCC->CFGR &= (uint32_t)0xFF02FFFFU; - - /*!< Disable all interrupts */ - RCC->CIER = 0x00000000U; - /* Configure the Vector Table location add offset address ------------------*/ -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ -#endif +#if defined (USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ } /** - * @brief Update SystemCoreClock according to Clock Register Values + * @brief Update SystemCoreClock variable according to Clock Register Values. * The SystemCoreClock variable contains the core clock (HCLK), it can * be used by the user application to setup the SysTick timer or configure * other parameters.