| /* |
| * Copyright (c) 2021 Antonio Tessarolo |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT nxp_vf610_adc |
| |
| #include <errno.h> |
| #include <zephyr/drivers/adc.h> |
| #include <adc_imx6sx.h> |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(vf610_adc, CONFIG_ADC_LOG_LEVEL); |
| |
| #define ADC_CONTEXT_USES_KERNEL_TIMER |
| #include "adc_context.h" |
| |
| struct vf610_adc_config { |
| ADC_Type *base; |
| uint8_t clock_source; |
| uint8_t divide_ratio; |
| void (*irq_config_func)(const struct device *dev); |
| }; |
| |
| struct vf610_adc_data { |
| const struct device *dev; |
| struct adc_context ctx; |
| uint16_t *buffer; |
| uint16_t *repeat_buffer; |
| uint32_t channels; |
| uint8_t channel_id; |
| }; |
| |
| static int vf610_adc_channel_setup(const struct device *dev, |
| const struct adc_channel_cfg *channel_cfg) |
| { |
| uint8_t channel_id = channel_cfg->channel_id; |
| |
| if (channel_id > (ADC_HC0_ADCH_MASK >> ADC_HC0_ADCH_SHIFT)) { |
| LOG_ERR("Channel %d is not valid", channel_id); |
| return -EINVAL; |
| } |
| |
| if (channel_cfg->acquisition_time != ADC_ACQ_TIME_DEFAULT) { |
| LOG_ERR("Invalid channel acquisition time"); |
| return -EINVAL; |
| } |
| |
| if (channel_cfg->differential) { |
| LOG_ERR("Differential channels are not supported"); |
| return -EINVAL; |
| } |
| |
| if (channel_cfg->gain != ADC_GAIN_1) { |
| LOG_ERR("Invalid channel gain"); |
| return -EINVAL; |
| } |
| |
| if (channel_cfg->reference != ADC_REF_INTERNAL) { |
| LOG_ERR("Invalid channel reference"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int start_read(const struct device *dev, const struct adc_sequence *sequence) |
| { |
| const struct vf610_adc_config *config = dev->config; |
| struct vf610_adc_data *data = dev->data; |
| enum _adc_average_number mode; |
| enum _adc_resolution_mode resolution; |
| int error; |
| ADC_Type *base = config->base; |
| |
| switch (sequence->resolution) { |
| case 8: |
| resolution = adcResolutionBit8; |
| break; |
| case 10: |
| resolution = adcResolutionBit10; |
| break; |
| case 12: |
| resolution = adcResolutionBit12; |
| break; |
| default: |
| LOG_ERR("Invalid resolution"); |
| return -EINVAL; |
| } |
| |
| ADC_SetResolutionMode(base, resolution); |
| |
| switch (sequence->oversampling) { |
| case 0: |
| mode = adcAvgNumNone; |
| break; |
| case 2: |
| mode = adcAvgNum4; |
| break; |
| case 3: |
| mode = adcAvgNum8; |
| break; |
| case 4: |
| mode = adcAvgNum16; |
| break; |
| case 5: |
| mode = adcAvgNum32; |
| break; |
| default: |
| LOG_ERR("Invalid oversampling"); |
| return -EINVAL; |
| } |
| ADC_SetAverageNum(config->base, mode); |
| |
| data->buffer = sequence->buffer; |
| |
| adc_context_start_read(&data->ctx, sequence); |
| |
| error = adc_context_wait_for_completion(&data->ctx); |
| return error; |
| } |
| |
| static int vf610_adc_read(const struct device *dev, |
| const struct adc_sequence *sequence) |
| { |
| struct vf610_adc_data *data = dev->data; |
| int error; |
| |
| adc_context_lock(&data->ctx, false, NULL); |
| error = start_read(dev, sequence); |
| adc_context_release(&data->ctx, error); |
| |
| return error; |
| } |
| |
| #ifdef CONFIG_ADC_ASYNC |
| static int vf610_adc_read_async(struct device *dev, |
| const struct adc_sequence *sequence, |
| struct k_poll_signal *async) |
| { |
| struct vf610_adc_data *data = dev->driver_data; |
| int error; |
| |
| adc_context_lock(&data->ctx, true, async); |
| error = start_read(dev, sequence); |
| adc_context_release(&data->ctx, error); |
| |
| return error; |
| } |
| #endif |
| |
| static void vf610_adc_start_channel(const struct device *dev) |
| { |
| const struct vf610_adc_config *config = dev->config; |
| struct vf610_adc_data *data = dev->data; |
| |
| data->channel_id = find_lsb_set(data->channels) - 1; |
| |
| LOG_DBG("Starting channel %d", data->channel_id); |
| |
| ADC_SetIntCmd(config->base, true); |
| |
| ADC_TriggerSingleConvert(config->base, data->channel_id); |
| } |
| |
| static void adc_context_start_sampling(struct adc_context *ctx) |
| { |
| struct vf610_adc_data *data = |
| CONTAINER_OF(ctx, struct vf610_adc_data, ctx); |
| |
| data->channels = ctx->sequence.channels; |
| data->repeat_buffer = data->buffer; |
| |
| vf610_adc_start_channel(data->dev); |
| } |
| |
| static void adc_context_update_buffer_pointer(struct adc_context *ctx, |
| bool repeat_sampling) |
| { |
| struct vf610_adc_data *data = |
| CONTAINER_OF(ctx, struct vf610_adc_data, ctx); |
| |
| if (repeat_sampling) { |
| data->buffer = data->repeat_buffer; |
| } |
| } |
| |
| static void vf610_adc_isr(void *arg) |
| { |
| struct device *dev = (struct device *)arg; |
| const struct vf610_adc_config *config = dev->config; |
| struct vf610_adc_data *data = dev->data; |
| ADC_Type *base = config->base; |
| uint16_t result; |
| |
| result = ADC_GetConvertResult(base); |
| LOG_DBG("Finished channel %d. Result is 0x%04x", |
| data->channel_id, result); |
| |
| *data->buffer++ = result; |
| data->channels &= ~BIT(data->channel_id); |
| |
| if (data->channels) { |
| vf610_adc_start_channel(dev); |
| } else { |
| adc_context_on_sampling_done(&data->ctx, dev); |
| } |
| } |
| |
| static int vf610_adc_init(const struct device *dev) |
| { |
| const struct vf610_adc_config *config = dev->config; |
| struct vf610_adc_data *data = dev->data; |
| ADC_Type *base = config->base; |
| adc_init_config_t adc_config; |
| |
| adc_config.averageNumber = adcAvgNumNone; |
| adc_config.resolutionMode = adcResolutionBit12; |
| adc_config.clockSource = config->clock_source; |
| adc_config.divideRatio = config->divide_ratio; |
| |
| ADC_Init(base, &adc_config); |
| |
| ADC_SetConvertTrigMode(base, adcSoftwareTrigger); |
| |
| ADC_SetCalibration(base, true); |
| |
| config->irq_config_func(dev); |
| data->dev = dev; |
| |
| adc_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| static const struct adc_driver_api vf610_adc_driver_api = { |
| .channel_setup = vf610_adc_channel_setup, |
| .read = vf610_adc_read, |
| #ifdef CONFIG_ADC_ASYNC |
| .read_async = vf610_adc_read_async, |
| #endif |
| }; |
| |
| #define VF610_ADC_INIT(n) \ |
| static void vf610_adc_config_func_##n(const struct device *dev);\ |
| \ |
| static const struct vf610_adc_config vf610_adc_config_##n = { \ |
| .base = (ADC_Type *)DT_INST_REG_ADDR(n), \ |
| .clock_source = DT_INST_PROP(n, clk_source), \ |
| .divide_ratio = DT_INST_PROP(n, clk_divider), \ |
| .irq_config_func = vf610_adc_config_func_##n, \ |
| }; \ |
| \ |
| static struct vf610_adc_data vf610_adc_data_##n = { \ |
| ADC_CONTEXT_INIT_TIMER(vf610_adc_data_##n, ctx), \ |
| ADC_CONTEXT_INIT_LOCK(vf610_adc_data_##n, ctx), \ |
| ADC_CONTEXT_INIT_SYNC(vf610_adc_data_##n, ctx), \ |
| }; \ |
| \ |
| DEVICE_DT_INST_DEFINE(n, &vf610_adc_init, \ |
| NULL, &vf610_adc_data_##n, \ |
| &vf610_adc_config_##n, POST_KERNEL, \ |
| CONFIG_ADC_INIT_PRIORITY, \ |
| &vf610_adc_driver_api); \ |
| \ |
| static void vf610_adc_config_func_##n(const struct device *dev) \ |
| { \ |
| IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), \ |
| vf610_adc_isr, \ |
| DEVICE_DT_INST_GET(n), 0); \ |
| \ |
| irq_enable(DT_INST_IRQN(n)); \ |
| } |
| |
| DT_INST_FOREACH_STATUS_OKAY(VF610_ADC_INIT) |