|  | /* | 
|  | * Copyright (c) 2018, Nordic Semiconductor ASA | 
|  | * | 
|  | * SPDX-License-Identifier: Apache-2.0 | 
|  | */ | 
|  |  | 
|  | #include <drivers/spi.h> | 
|  | #include <nrfx_spis.h> | 
|  |  | 
|  | #define LOG_DOMAIN "spi_nrfx_spis" | 
|  | #define LOG_LEVEL CONFIG_SPI_LOG_LEVEL | 
|  | #include <logging/log.h> | 
|  | LOG_MODULE_REGISTER(spi_nrfx_spis); | 
|  |  | 
|  | #include "spi_context.h" | 
|  |  | 
|  | struct spi_nrfx_data { | 
|  | struct spi_context ctx; | 
|  | }; | 
|  |  | 
|  | struct spi_nrfx_config { | 
|  | nrfx_spis_t spis; | 
|  | size_t      max_buf_len; | 
|  | }; | 
|  |  | 
|  | static inline struct spi_nrfx_data *get_dev_data(const struct device *dev) | 
|  | { | 
|  | return dev->data; | 
|  | } | 
|  |  | 
|  | static inline const struct spi_nrfx_config *get_dev_config(const struct device *dev) | 
|  | { | 
|  | return dev->config; | 
|  | } | 
|  |  | 
|  | static inline nrf_spis_mode_t get_nrf_spis_mode(uint16_t operation) | 
|  | { | 
|  | if (SPI_MODE_GET(operation) & SPI_MODE_CPOL) { | 
|  | if (SPI_MODE_GET(operation) & SPI_MODE_CPHA) { | 
|  | return NRF_SPIS_MODE_3; | 
|  | } else { | 
|  | return NRF_SPIS_MODE_2; | 
|  | } | 
|  | } else { | 
|  | if (SPI_MODE_GET(operation) & SPI_MODE_CPHA) { | 
|  | return NRF_SPIS_MODE_1; | 
|  | } else { | 
|  | return NRF_SPIS_MODE_0; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline nrf_spis_bit_order_t get_nrf_spis_bit_order(uint16_t operation) | 
|  | { | 
|  | if (operation & SPI_TRANSFER_LSB) { | 
|  | return NRF_SPIS_BIT_ORDER_LSB_FIRST; | 
|  | } else { | 
|  | return NRF_SPIS_BIT_ORDER_MSB_FIRST; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int configure(const struct device *dev, | 
|  | const struct spi_config *spi_cfg) | 
|  | { | 
|  | struct spi_context *ctx = &get_dev_data(dev)->ctx; | 
|  |  | 
|  | if (spi_context_configured(ctx, spi_cfg)) { | 
|  | /* Already configured. No need to do it again. */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (SPI_OP_MODE_GET(spi_cfg->operation) == SPI_OP_MODE_MASTER) { | 
|  | LOG_ERR("Master mode is not supported on %s", | 
|  | dev->name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (spi_cfg->operation & SPI_MODE_LOOP) { | 
|  | LOG_ERR("Loopback mode is not supported"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if ((spi_cfg->operation & SPI_LINES_MASK) != SPI_LINES_SINGLE) { | 
|  | LOG_ERR("Only single line mode is supported"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (SPI_WORD_SIZE_GET(spi_cfg->operation) != 8) { | 
|  | LOG_ERR("Word sizes other than 8 bits" | 
|  | " are not supported"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (spi_cfg->cs) { | 
|  | LOG_ERR("CS control via GPIO is not supported"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ctx->config = spi_cfg; | 
|  |  | 
|  | nrf_spis_configure(get_dev_config(dev)->spis.p_reg, | 
|  | get_nrf_spis_mode(spi_cfg->operation), | 
|  | get_nrf_spis_bit_order(spi_cfg->operation)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void prepare_for_transfer(const struct device *dev) | 
|  | { | 
|  | struct spi_nrfx_data *dev_data = get_dev_data(dev); | 
|  | const struct spi_nrfx_config *dev_config = get_dev_config(dev); | 
|  | struct spi_context *ctx = &dev_data->ctx; | 
|  | int status; | 
|  |  | 
|  | size_t buf_len = spi_context_max_continuous_chunk(ctx); | 
|  |  | 
|  | if (buf_len > 0) { | 
|  | nrfx_err_t result; | 
|  |  | 
|  | if (buf_len > dev_config->max_buf_len) { | 
|  | buf_len = dev_config->max_buf_len; | 
|  | } | 
|  |  | 
|  | result = nrfx_spis_buffers_set( | 
|  | &dev_config->spis, | 
|  | ctx->tx_buf, | 
|  | spi_context_tx_buf_on(ctx) ? buf_len : 0, | 
|  | ctx->rx_buf, | 
|  | spi_context_rx_buf_on(ctx) ? buf_len : 0); | 
|  | if (result == NRFX_SUCCESS) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Cannot prepare for transfer. */ | 
|  | status = -EIO; | 
|  | } else { | 
|  | /* Zero-length buffer provided. */ | 
|  | status = 0; | 
|  | } | 
|  |  | 
|  | spi_context_complete(ctx, status); | 
|  | } | 
|  |  | 
|  | static int transceive(const struct device *dev, | 
|  | const struct spi_config *spi_cfg, | 
|  | const struct spi_buf_set *tx_bufs, | 
|  | const struct spi_buf_set *rx_bufs, | 
|  | bool asynchronous, | 
|  | struct k_poll_signal *signal) | 
|  | { | 
|  | struct spi_nrfx_data *dev_data = get_dev_data(dev); | 
|  | int error; | 
|  |  | 
|  | spi_context_lock(&dev_data->ctx, asynchronous, signal); | 
|  |  | 
|  | error = configure(dev, spi_cfg); | 
|  | if (error != 0) { | 
|  | /* Invalid configuration. */ | 
|  | } else if ((tx_bufs && tx_bufs->count > 1) || | 
|  | (rx_bufs && rx_bufs->count > 1)) { | 
|  | LOG_ERR("Scattered buffers are not supported"); | 
|  | error = -ENOTSUP; | 
|  | } else if (tx_bufs && tx_bufs->buffers[0].len && | 
|  | !nrfx_is_in_ram(tx_bufs->buffers[0].buf)) { | 
|  | LOG_ERR("Only buffers located in RAM are supported"); | 
|  | error = -ENOTSUP; | 
|  | } else { | 
|  | spi_context_buffers_setup(&dev_data->ctx, tx_bufs, rx_bufs, 1); | 
|  |  | 
|  | prepare_for_transfer(dev); | 
|  |  | 
|  | error = spi_context_wait_for_completion(&dev_data->ctx); | 
|  | } | 
|  |  | 
|  | spi_context_release(&dev_data->ctx, error); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int spi_nrfx_transceive(const struct device *dev, | 
|  | const struct spi_config *spi_cfg, | 
|  | const struct spi_buf_set *tx_bufs, | 
|  | const struct spi_buf_set *rx_bufs) | 
|  | { | 
|  | return transceive(dev, spi_cfg, tx_bufs, rx_bufs, false, NULL); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SPI_ASYNC | 
|  | static int spi_nrfx_transceive_async(const struct device *dev, | 
|  | const struct spi_config *spi_cfg, | 
|  | const struct spi_buf_set *tx_bufs, | 
|  | const struct spi_buf_set *rx_bufs, | 
|  | struct k_poll_signal *async) | 
|  | { | 
|  | return transceive(dev, spi_cfg, tx_bufs, rx_bufs, true, async); | 
|  | } | 
|  | #endif /* CONFIG_SPI_ASYNC */ | 
|  |  | 
|  | static int spi_nrfx_release(const struct device *dev, | 
|  | const struct spi_config *spi_cfg) | 
|  | { | 
|  | struct spi_nrfx_data *dev_data = get_dev_data(dev); | 
|  |  | 
|  | if (!spi_context_configured(&dev_data->ctx, spi_cfg)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | spi_context_unlock_unconditionally(&dev_data->ctx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct spi_driver_api spi_nrfx_driver_api = { | 
|  | .transceive = spi_nrfx_transceive, | 
|  | #ifdef CONFIG_SPI_ASYNC | 
|  | .transceive_async = spi_nrfx_transceive_async, | 
|  | #endif | 
|  | .release = spi_nrfx_release, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static void event_handler(const nrfx_spis_evt_t *p_event, void *p_context) | 
|  | { | 
|  | struct spi_nrfx_data *dev_data = p_context; | 
|  |  | 
|  | if (p_event->evt_type == NRFX_SPIS_XFER_DONE) { | 
|  | spi_context_complete(&dev_data->ctx, p_event->rx_amount); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int init_spis(const struct device *dev, | 
|  | const nrfx_spis_config_t *config) | 
|  | { | 
|  | struct spi_nrfx_data *dev_data = get_dev_data(dev); | 
|  | /* This sets only default values of frequency, mode and bit order. | 
|  | * The proper ones are set in configure() when a transfer is started. | 
|  | */ | 
|  | nrfx_err_t result = nrfx_spis_init(&get_dev_config(dev)->spis, | 
|  | config, | 
|  | event_handler, | 
|  | dev_data); | 
|  | if (result != NRFX_SUCCESS) { | 
|  | LOG_ERR("Failed to initialize device: %s", dev->name); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | spi_context_unlock_unconditionally(&dev_data->ctx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Current factors requiring use of DT_NODELABEL: | 
|  | * | 
|  | * - NRFX_SPIS_INSTANCE() requires an SoC instance number | 
|  | * - soc-instance-numbered kconfig enables | 
|  | * - ORC is a SoC-instance-numbered kconfig option instead of a DT property | 
|  | */ | 
|  |  | 
|  | #define SPIS(idx) DT_NODELABEL(spi##idx) | 
|  | #define SPIS_PROP(idx, prop) DT_PROP(SPIS(idx), prop) | 
|  |  | 
|  | #define SPI_NRFX_SPIS_DEVICE(idx)					       \ | 
|  | static int spi_##idx##_init(const struct device *dev)		       \ | 
|  | {								       \ | 
|  | IRQ_CONNECT(DT_IRQN(SPIS(idx)), DT_IRQ(SPIS(idx), priority),   \ | 
|  | nrfx_isr, nrfx_spis_##idx##_irq_handler, 0);       \ | 
|  | const nrfx_spis_config_t config = {			       \ | 
|  | .sck_pin    = SPIS_PROP(idx, sck_pin),		       \ | 
|  | .mosi_pin   = SPIS_PROP(idx, mosi_pin),		       \ | 
|  | .miso_pin   = SPIS_PROP(idx, miso_pin),		       \ | 
|  | .csn_pin    = SPIS_PROP(idx, csn_pin),		       \ | 
|  | .mode       = NRF_SPIS_MODE_0,			       \ | 
|  | .bit_order  = NRF_SPIS_BIT_ORDER_MSB_FIRST,	       \ | 
|  | .csn_pullup = NRF_GPIO_PIN_NOPULL,		       \ | 
|  | .miso_drive = NRF_GPIO_PIN_S0S1,		       \ | 
|  | .orc        = CONFIG_SPI_##idx##_NRF_ORC,	       \ | 
|  | .def        = SPIS_PROP(idx, def_char),		       \ | 
|  | };							       \ | 
|  | return init_spis(dev, &config);				       \ | 
|  | }								       \ | 
|  | static struct spi_nrfx_data spi_##idx##_data = {		       \ | 
|  | SPI_CONTEXT_INIT_LOCK(spi_##idx##_data, ctx),		       \ | 
|  | SPI_CONTEXT_INIT_SYNC(spi_##idx##_data, ctx),		       \ | 
|  | };								       \ | 
|  | static const struct spi_nrfx_config spi_##idx##z_config = {	       \ | 
|  | .spis = NRFX_SPIS_INSTANCE(idx),			       \ | 
|  | .max_buf_len = (1 << SPIS##idx##_EASYDMA_MAXCNT_SIZE) - 1,     \ | 
|  | };								       \ | 
|  | DEVICE_AND_API_INIT(spi_##idx,					       \ | 
|  | DT_LABEL(SPIS(idx)),			       \ | 
|  | spi_##idx##_init,				       \ | 
|  | &spi_##idx##_data,				       \ | 
|  | &spi_##idx##z_config,			       \ | 
|  | POST_KERNEL,				       \ | 
|  | CONFIG_SPI_INIT_PRIORITY,			       \ | 
|  | &spi_nrfx_driver_api) | 
|  |  | 
|  | #ifdef CONFIG_SPI_0_NRF_SPIS | 
|  | SPI_NRFX_SPIS_DEVICE(0); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_SPI_1_NRF_SPIS | 
|  | SPI_NRFX_SPIS_DEVICE(1); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_SPI_2_NRF_SPIS | 
|  | SPI_NRFX_SPIS_DEVICE(2); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_SPI_3_NRF_SPIS | 
|  | SPI_NRFX_SPIS_DEVICE(3); | 
|  | #endif |