| /* |
| * Copyright (c) 2020 Linaro Limited. |
| * Copyright (c) 2023 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <mem.h> |
| #include <arm/nordic/nrf52833.dtsi> |
| /* We resuse the pinctrl definitions directly from the real board : */ |
| #include <../boards/nordic/nrf52833dk/nrf52833dk_nrf52833-pinctrl.dtsi> |
| |
| / { |
| model = "nrf52 bsim"; |
| compatible = "bsim,nrf52833"; |
| |
| /* We need to remove aliases to nodes we delete */ |
| aliases { |
| /delete-property/ i2c-0; |
| /delete-property/ i2c-1; |
| /delete-property/ spi-0; |
| /delete-property/ spi-1; |
| /delete-property/ spi-2; |
| /delete-property/ spi-3; |
| /delete-property/ adc-0; |
| /delete-property/ wdt-0; |
| /delete-property/ pwm-0; |
| /delete-property/ pwm-1; |
| /delete-property/ pwm-2; |
| /delete-property/ pwm-3; |
| /delete-property/ qdec-0; |
| }; |
| |
| chosen { |
| zephyr,ieee802154 = &ieee802154; |
| zephyr,flash = &flash0; |
| /* UART used by the BT controller UART HCI driver by default: */ |
| zephyr,bt-c2h-uart = &uart1; |
| }; |
| |
| soc { |
| /delete-node/ memory@20000000; |
| /delete-node/ adc@40007000; |
| /delete-node/ i2c@40003000; |
| /delete-node/ i2c@40004000; |
| /delete-node/ pwm@4001c000; |
| /delete-node/ pwm@40021000; |
| /delete-node/ pwm@40022000; |
| /delete-node/ pwm@4002d000; |
| /delete-node/ qdec@40012000; |
| /delete-node/ spi@40003000; |
| /delete-node/ spi@40004000; |
| /delete-node/ spi@40023000; |
| /delete-node/ spi@4002f000; |
| /delete-node/ nfct@40005000; |
| /delete-node/ watchdog@40010000; |
| /delete-node/ acl@4001e000; |
| /delete-node/ usbd@40027000; |
| }; |
| |
| /delete-node/ sw-pwm; |
| }; |
| |
| &radio { |
| /* These features are not yet supported by the RADIO model */ |
| /delete-property/ dfe-supported; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &ieee802154 { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| reg = <0x00000000 DT_SIZE_K(512)>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| storage_partition: partition@0 { |
| label = "storage"; |
| reg = <0x00000000 DT_SIZE_K(512)>; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| compatible = "nordic,nrf-uarte"; |
| status = "okay"; |
| current-speed = <115200>; |
| pinctrl-0 = <&uart0_default>; |
| pinctrl-1 = <&uart0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &uart1 { |
| compatible = "nordic,nrf-uarte"; |
| status = "okay"; |
| current-speed = <115200>; |
| pinctrl-0 = <&uart1_default>; |
| pinctrl-1 = <&uart1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| hw-flow-control; |
| |
| bt_hci_uart: bt_hci_uart { |
| compatible = "zephyr,bt-hci-uart"; |
| status = "okay"; |
| }; |
| }; |