blob: 58502da63501ab1ff378ca1732529fba628c0c9c [file] [log] [blame]
/*
* Copyright (c) 1997-2010, 2012-2015 Wind River Systems, Inc.
* Copyright (c) 2020 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <ctype.h>
#include <errno.h>
#include <inttypes.h>
#include <limits.h>
#include <stdarg.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include <string.h>
#include <zephyr/toolchain.h>
#include <sys/types.h>
#include <zephyr/sys/util.h>
#include <zephyr/sys/cbprintf.h>
/* newlib doesn't declare this function unless __POSIX_VISIBLE >= 200809. No
* idea how to make that happen, so lets put it right here.
*/
size_t strnlen(const char *s, size_t maxlen);
/* Provide typedefs used for signed and unsigned integral types
* capable of holding all convertible integral values.
*/
#ifdef CONFIG_CBPRINTF_FULL_INTEGRAL
typedef intmax_t sint_value_type;
typedef uintmax_t uint_value_type;
#else
typedef int32_t sint_value_type;
typedef uint32_t uint_value_type;
#endif
/* The maximum buffer size required is for octal formatting: one character for
* every 3 bits. Neither EOS nor alternate forms are required.
*/
#define CONVERTED_INT_BUFLEN ((CHAR_BIT * sizeof(uint_value_type) + 2) / 3)
/* The float code may extract up to 16 digits, plus a prefix, a
* leading 0, a dot, and an exponent in the form e+xxx for a total of
* 24. Add a trailing NULL so the buffer length required is 25.
*/
#define CONVERTED_FP_BUFLEN 25U
#ifdef CONFIG_CBPRINTF_FP_SUPPORT
#define CONVERTED_BUFLEN MAX(CONVERTED_INT_BUFLEN, CONVERTED_FP_BUFLEN)
#else
#define CONVERTED_BUFLEN CONVERTED_INT_BUFLEN
#endif
/* The allowed types of length modifier. */
enum length_mod_enum {
LENGTH_NONE, /* int */
LENGTH_HH, /* char */
LENGTH_H, /* short */
LENGTH_L, /* long */
LENGTH_LL, /* long long */
LENGTH_J, /* intmax */
LENGTH_Z, /* size_t */
LENGTH_T, /* ptrdiff_t */
LENGTH_UPPER_L, /* long double */
};
/* Categories of conversion specifiers. */
enum specifier_cat_enum {
/* unrecognized */
SPECIFIER_INVALID,
/* d, i */
SPECIFIER_SINT,
/* c, o, u, x, X */
SPECIFIER_UINT,
/* n, p, s */
SPECIFIER_PTR,
/* a, A, e, E, f, F, g, G */
SPECIFIER_FP,
};
#define CHAR_IS_SIGNED (CHAR_MIN != 0)
#if CHAR_IS_SIGNED
#define CASE_SINT_CHAR case 'c':
#define CASE_UINT_CHAR
#else
#define CASE_SINT_CHAR
#define CASE_UINT_CHAR case 'c':
#endif
/* We need two pieces of information about wchar_t:
* * WCHAR_IS_SIGNED: whether it's signed or unsigned;
* * WINT_TYPE: the type to use when extracting it from va_args
*
* The former can be determined from the value of WCHAR_MIN if it's defined.
* It's not for minimal libc, so treat it as whatever char is.
*
* The latter should be wint_t, but minimal libc doesn't provide it. We can
* substitute wchar_t as long as that type does not undergo default integral
* promotion as an argument. But it does for at least one toolchain (xtensa),
* and where it does we need to use the promoted type in va_arg() to avoid
* build errors, otherwise we can use the base type. We can tell that
* integral promotion occurs if WCHAR_MAX is strictly less than INT_MAX.
*/
#ifndef WCHAR_MIN
#define WCHAR_IS_SIGNED CHAR_IS_SIGNED
#if WCHAR_IS_SIGNED
#define WINT_TYPE int
#else /* wchar signed */
#define WINT_TYPE unsigned int
#endif /* wchar signed */
#else /* WCHAR_MIN defined */
#define WCHAR_IS_SIGNED ((WCHAR_MIN - 0) != 0)
#if WCHAR_MAX < INT_MAX
/* Signed or unsigned, it'll be int */
#define WINT_TYPE int
#else /* wchar rank vs int */
#define WINT_TYPE wchar_t
#endif /* wchar rank vs int */
#endif /* WCHAR_MIN defined */
/* Case label to identify conversions for signed integral values. The
* corresponding argument_value tag is sint and category is
* SPECIFIER_SINT.
*/
#define SINT_CONV_CASES \
'd': \
CASE_SINT_CHAR \
case 'i'
/* Case label to identify conversions for signed integral arguments.
* The corresponding argument_value tag is uint and category is
* SPECIFIER_UINT.
*/
#define UINT_CONV_CASES \
'o': \
CASE_UINT_CHAR \
case 'u': \
case 'x': \
case 'X'
/* Case label to identify conversions for floating point arguments.
* The corresponding argument_value tag is either dbl or ldbl,
* depending on length modifier, and the category is SPECIFIER_FP.
*/
#define FP_CONV_CASES \
'a': \
case 'A': \
case 'e': \
case 'E': \
case 'f': \
case 'F': \
case 'g': \
case 'G'
/* Case label to identify conversions for pointer arguments. The
* corresponding argument_value tag is ptr and the category is
* SPECIFIER_PTR.
*/
#define PTR_CONV_CASES \
'n': \
case 'p': \
case 's'
/* Storage for an argument value. */
union argument_value {
/* For SINT conversions */
sint_value_type sint;
/* For UINT conversions */
uint_value_type uint;
/* For FP conversions without L length */
double dbl;
/* For FP conversions with L length */
long double ldbl;
/* For PTR conversions */
void *ptr;
};
/* Structure capturing all attributes of a conversion
* specification.
*
* Initial values come from the specification, but are updated during
* the conversion.
*/
struct conversion {
/** Indicates flags are inconsistent */
bool invalid: 1;
/** Indicates flags are valid but not supported */
bool unsupported: 1;
/** Left-justify value in width */
bool flag_dash: 1;
/** Explicit sign */
bool flag_plus: 1;
/** Space for non-negative sign */
bool flag_space: 1;
/** Alternative form */
bool flag_hash: 1;
/** Pad with leading zeroes */
bool flag_zero: 1;
/** Width field present */
bool width_present: 1;
/** Width value from int argument
*
* width_value is set to the absolute value of the argument.
* If the argument is negative flag_dash is also set.
*/
bool width_star: 1;
/** Precision field present */
bool prec_present: 1;
/** Precision from int argument
*
* prec_value is set to the value of a non-negative argument.
* If the argument is negative prec_present is cleared.
*/
bool prec_star: 1;
/** Length modifier (value from length_mod_enum) */
unsigned int length_mod: 4;
/** Indicates an a or A conversion specifier.
*
* This affects how precision is handled.
*/
bool specifier_a: 1;
/** Conversion specifier category (value from specifier_cat_enum) */
unsigned int specifier_cat: 3;
/** If set alternate form requires 0 before octal. */
bool altform_0: 1;
/** If set alternate form requires 0x before hex. */
bool altform_0c: 1;
/** Set when pad0_value zeroes are to be to be inserted after
* the decimal point in a floating point conversion.
*/
bool pad_postdp: 1;
/** Set for floating point values that have a non-zero
* pad0_prefix or pad0_pre_exp.
*/
bool pad_fp: 1;
/** Conversion specifier character */
unsigned char specifier;
union {
/** Width value from specification.
*
* Valid until conversion begins.
*/
int width_value;
/** Number of extra zeroes to be inserted around a
* formatted value:
*
* * before a formatted integer value due to precision
* and flag_zero; or
* * before a floating point mantissa decimal point
* due to precision; or
* * after a floating point mantissa decimal point due
* to precision.
*
* For example for zero-padded hexadecimal integers
* this would insert where the angle brackets are in:
* 0x<>hhhh.
*
* For floating point numbers this would insert at
* either <1> or <2> depending on #pad_postdp:
* VVV<1>.<2>FFFFeEEE
*
* Valid after conversion begins.
*/
int pad0_value;
};
union {
/** Precision from specification.
*
* Valid until conversion begins.
*/
int prec_value;
/** Number of extra zeros to be inserted after a decimal
* point due to precision.
*
* Inserts at <> in: VVVV.FFFF<>eEE
*
* Valid after conversion begins.
*/
int pad0_pre_exp;
};
};
/** Get a size represented as a sequence of decimal digits.
*
* @param[inout] str where to read from. Updated to point to the first
* unconsumed character. There must be at least one non-digit character in
* the referenced text.
*
* @return the decoded integer value.
*/
static size_t extract_decimal(const char **str)
{
const char *sp = *str;
size_t val = 0;
while (isdigit((int)(unsigned char)*sp) != 0) {
val = 10U * val + *sp++ - '0';
}
*str = sp;
return val;
}
/** Extract C99 conversion specification flags.
*
* @param conv pointer to the conversion being defined.
*
* @param sp pointer to the first character after the % of a conversion
* specifier.
*
* @return a pointer the first character that follows the flags.
*/
static inline const char *extract_flags(struct conversion *conv,
const char *sp)
{
bool loop = true;
do {
switch (*sp) {
case '-':
conv->flag_dash = true;
break;
case '+':
conv->flag_plus = true;
break;
case ' ':
conv->flag_space = true;
break;
case '#':
conv->flag_hash = true;
break;
case '0':
conv->flag_zero = true;
break;
default:
loop = false;
}
if (loop) {
++sp;
}
} while (loop);
/* zero && dash => !zero */
if (conv->flag_zero && conv->flag_dash) {
conv->flag_zero = false;
}
/* space && plus => !plus, handled in emitter code */
return sp;
}
/** Extract a C99 conversion specification width.
*
* @param conv pointer to the conversion being defined.
*
* @param sp pointer to the first character after the flags element of a
* conversion specification.
*
* @return a pointer the first character that follows the width.
*/
static inline const char *extract_width(struct conversion *conv,
const char *sp)
{
conv->width_present = true;
if (*sp == '*') {
conv->width_star = true;
return ++sp;
}
const char *wp = sp;
size_t width = extract_decimal(&sp);
if (sp != wp) {
conv->width_present = true;
conv->width_value = width;
conv->unsupported |= ((conv->width_value < 0)
|| (width != (size_t)conv->width_value));
}
return sp;
}
/** Extract a C99 conversion specification precision.
*
* @param conv pointer to the conversion being defined.
*
* @param sp pointer to the first character after the width element of a
* conversion specification.
*
* @return a pointer the first character that follows the precision.
*/
static inline const char *extract_prec(struct conversion *conv,
const char *sp)
{
conv->prec_present = (*sp == '.');
if (!conv->prec_present) {
return sp;
}
++sp;
if (*sp == '*') {
conv->prec_star = true;
return ++sp;
}
size_t prec = extract_decimal(&sp);
conv->prec_value = prec;
conv->unsupported |= ((conv->prec_value < 0)
|| (prec != (size_t)conv->prec_value));
return sp;
}
/** Extract a C99 conversion specification length.
*
* @param conv pointer to the conversion being defined.
*
* @param sp pointer to the first character after the precision element of a
* conversion specification.
*
* @return a pointer the first character that follows the precision.
*/
static inline const char *extract_length(struct conversion *conv,
const char *sp)
{
switch (*sp) {
case 'h':
if (*++sp == 'h') {
conv->length_mod = LENGTH_HH;
++sp;
} else {
conv->length_mod = LENGTH_H;
}
break;
case 'l':
if (*++sp == 'l') {
conv->length_mod = LENGTH_LL;
++sp;
} else {
conv->length_mod = LENGTH_L;
}
break;
case 'j':
conv->length_mod = LENGTH_J;
++sp;
break;
case 'z':
conv->length_mod = LENGTH_Z;
++sp;
break;
case 't':
conv->length_mod = LENGTH_T;
++sp;
break;
case 'L':
conv->length_mod = LENGTH_UPPER_L;
++sp;
/* We recognize and consume these, but can't format
* them.
*/
conv->unsupported = true;
break;
default:
conv->length_mod = LENGTH_NONE;
break;
}
return sp;
}
/* Extract a C99 conversion specifier.
*
* This is the character that identifies the representation of the converted
* value.
*
* @param conv pointer to the conversion being defined.
*
* @param sp pointer to the first character after the length element of a
* conversion specification.
*
* @return a pointer the first character that follows the specifier.
*/
static inline const char *extract_specifier(struct conversion *conv,
const char *sp)
{
bool unsupported = false;
conv->specifier = *sp;
++sp;
switch (conv->specifier) {
case SINT_CONV_CASES:
conv->specifier_cat = SPECIFIER_SINT;
goto int_conv;
case UINT_CONV_CASES:
conv->specifier_cat = SPECIFIER_UINT;
int_conv:
/* L length specifier not acceptable */
if (conv->length_mod == LENGTH_UPPER_L) {
conv->invalid = true;
}
/* For c LENGTH_NONE and LENGTH_L would be ok,
* but we don't support formatting wide characters.
*/
if (conv->specifier == 'c') {
unsupported = (conv->length_mod != LENGTH_NONE);
} else if (!IS_ENABLED(CONFIG_CBPRINTF_FULL_INTEGRAL)) {
/* Disable conversion that might produce truncated
* results with buffers sized for 32 bits.
*/
switch (conv->length_mod) {
case LENGTH_L:
unsupported = sizeof(long) > 4;
break;
case LENGTH_LL:
unsupported = sizeof(long long) > 4;
break;
case LENGTH_J:
unsupported = sizeof(uintmax_t) > 4;
break;
case LENGTH_Z:
unsupported = sizeof(size_t) > 4;
break;
case LENGTH_T:
unsupported = sizeof(ptrdiff_t) > 4;
break;
default:
/* Add an empty default with break, this is a defensive
* programming. Static analysis tool won't raise a violation
* if default is empty, but has that comment.
*/
break;
}
} else {
;
}
break;
case FP_CONV_CASES:
conv->specifier_cat = SPECIFIER_FP;
/* Don't support if disabled */
if (!IS_ENABLED(CONFIG_CBPRINTF_FP_SUPPORT)) {
unsupported = true;
break;
}
/* When FP enabled %a support is still conditional. */
conv->specifier_a = (conv->specifier == 'a')
|| (conv->specifier == 'A');
if (conv->specifier_a
&& !IS_ENABLED(CONFIG_CBPRINTF_FP_A_SUPPORT)) {
unsupported = true;
break;
}
/* The l specifier has no effect. Otherwise length
* modifiers other than L are invalid.
*/
if (conv->length_mod == LENGTH_L) {
conv->length_mod = LENGTH_NONE;
} else if ((conv->length_mod != LENGTH_NONE)
&& (conv->length_mod != LENGTH_UPPER_L)) {
conv->invalid = true;
} else {
;
}
break;
/* PTR cases are distinct */
case 'n':
conv->specifier_cat = SPECIFIER_PTR;
/* Anything except L */
if (conv->length_mod == LENGTH_UPPER_L) {
unsupported = true;
}
break;
case 's':
case 'p':
conv->specifier_cat = SPECIFIER_PTR;
/* p: only LENGTH_NONE
*
* s: LENGTH_NONE or LENGTH_L but wide
* characters not supported.
*/
if (conv->length_mod != LENGTH_NONE) {
unsupported = true;
}
break;
default:
conv->invalid = true;
break;
}
conv->unsupported |= unsupported;
return sp;
}
/* Extract the complete C99 conversion specification.
*
* @param conv pointer to the conversion being defined.
*
* @param sp pointer to the % that introduces a conversion specification.
*
* @return pointer to the first character that follows the specification.
*/
static inline const char *extract_conversion(struct conversion *conv,
const char *sp)
{
*conv = (struct conversion) {
.invalid = false,
};
/* Skip over the opening %. If the conversion specifier is %,
* that's the only thing that should be there, so
* fast-exit.
*/
++sp;
if (*sp == '%') {
conv->specifier = *sp;
++sp;
return sp;
}
sp = extract_flags(conv, sp);
sp = extract_width(conv, sp);
sp = extract_prec(conv, sp);
sp = extract_length(conv, sp);
sp = extract_specifier(conv, sp);
return sp;
}
#ifdef CONFIG_64BIT
static void _ldiv5(uint64_t *v)
{
/* The compiler can optimize this on its own on 64-bit architectures */
*v /= 5U;
}
#else /* CONFIG_64BIT */
/*
* Tiny integer divide-by-five routine. The full 64 bit division
* implementations in libgcc are very large on some architectures, and
* currently nothing in Zephyr pulls it into the link. So it makes
* sense to define this much smaller special case here to avoid
* including it just for printf.
*
* It works by multiplying v by the reciprocal of 5 i.e.:
*
* result = v * ((1 << 64) / 5) / (1 << 64)
*
* This produces a 128-bit result, but we drop the bottom 64 bits which
* accounts for the division by (1 << 64). The product is kept to 64 bits
* by summing partial multiplications and shifting right by 32 which on
* most 32-bit architectures means only a register drop.
*
* Here the multiplier is: (1 << 64) / 5 = 0x3333333333333333
* i.e. a 62 bits value. To compensate for the reduced precision, we
* add an initial bias of 1 to v. This conveniently allows for keeping
* the multiplier in a single 32-bit register given its pattern.
* Enlarging the multiplier to 64 bits would also work but carry handling
* on the summing of partial mults would be necessary, and a final right
* shift would be needed, requiring more instructions.
*/
static void _ldiv5(uint64_t *v)
{
uint32_t v_lo = *v;
uint32_t v_hi = *v >> 32;
uint32_t m = 0x33333333;
uint64_t result;
/*
* Force the multiplier constant into a register and make it
* opaque to the compiler, otherwise gcc tries to be too smart
* for its own good with a large expansion of adds and shifts.
*/
__asm__ ("" : "+r" (m));
/*
* Apply a bias of 1 to v. We can't add it to v as this would overflow
* it when at max range. Factor it out with the multiplier upfront.
*/
result = ((uint64_t)m << 32) | m;
/* The actual multiplication. */
result += (uint64_t)v_lo * m;
result >>= 32;
result += (uint64_t)v_lo * m;
result += (uint64_t)v_hi * m;
result >>= 32;
result += (uint64_t)v_hi * m;
*v = result;
}
#endif /* CONFIG_64BIT */
/* Division by 10 */
static void _ldiv10(uint64_t *v)
{
*v >>= 1;
_ldiv5(v);
}
/* Extract the next decimal character in the converted representation of a
* fractional component.
*/
static char _get_digit(uint64_t *fr, int *digit_count)
{
char rval;
if (*digit_count > 0) {
--*digit_count;
*fr *= 10U;
rval = ((*fr >> 60) & 0xF) + '0';
*fr &= (BIT64(60) - 1U);
} else {
rval = '0';
}
return rval;
}
static inline size_t conversion_radix(char specifier)
{
switch (specifier) {
default:
case 'd':
case 'i':
case 'u':
return 10;
case 'o':
return 8;
case 'p':
case 'x':
case 'X':
return 16;
}
}
/* Writes the given value into the buffer in the specified base.
*
* Precision is applied *ONLY* within the space allowed.
*
* Alternate form value is applied to o, x, and X conversions.
*
* The buffer is filled backwards, so the input bpe is the end of the
* generated representation. The returned pointer is to the first
* character of the representation.
*/
static char *encode_uint(uint_value_type value,
struct conversion *conv,
char *bps,
const char *bpe)
{
bool upcase = isupper((int)conv->specifier) != 0;
const unsigned int radix = conversion_radix(conv->specifier);
char *bp = bps + (bpe - bps);
do {
unsigned int lsv = (unsigned int)(value % radix);
--bp;
*bp = (lsv <= 9) ? ('0' + lsv)
: upcase ? ('A' + lsv - 10) : ('a' + lsv - 10);
value /= radix;
} while ((value != 0) && (bps < bp));
/* Record required alternate forms. This can be determined
* from the radix without re-checking specifier.
*/
if (conv->flag_hash) {
if (radix == 8) {
conv->altform_0 = true;
} else if (radix == 16) {
conv->altform_0c = true;
} else {
;
}
}
return bp;
}
/* Number of bits in the fractional part of an IEEE 754-2008 double
* precision float.
*/
#define FRACTION_BITS 52
/* Number of hex "digits" in the fractional part of an IEEE 754-2008
* double precision float.
*/
#define FRACTION_HEX DIV_ROUND_UP(FRACTION_BITS, 4)
/* Number of bits in the exponent of an IEEE 754-2008 double precision
* float.
*/
#define EXPONENT_BITS 11
/* Mask for the sign (negative) bit of an IEEE 754-2008 double precision
* float.
*/
#define SIGN_MASK BIT64(63)
/* Mask for the high-bit of a uint64_t representation of a fractional
* value.
*/
#define BIT_63 BIT64(63)
/* Convert the IEEE 754-2008 double to text format.
*
* @param value the 64-bit floating point value.
*
* @param conv details about how the conversion is to proceed. Some fields
* are adjusted based on the value being converted.
*
* @param precision the precision for the conversion (generally digits past
* the decimal point).
*
* @param bps pointer to the first character in a buffer that will hold the
* converted value.
*
* @param bpe On entry this points to the end of the buffer reserved to hold
* the converted value. On exit it is updated to point just past the
* converted value.
*
* return a pointer to the start of the converted value. This may not be @p
* bps but will be consistent with the exit value of *bpe.
*/
static char *encode_float(double value,
struct conversion *conv,
int precision,
char *sign,
char *bps,
const char **bpe)
{
union {
uint64_t u64;
double dbl;
} u = {
.dbl = value,
};
bool prune_zero = false;
char *buf = bps;
/* Prepend the sign: '-' if negative, flags control
* non-negative behavior.
*/
if ((u.u64 & SIGN_MASK) != 0U) {
*sign = '-';
} else if (conv->flag_plus) {
*sign = '+';
} else if (conv->flag_space) {
*sign = ' ';
} else {
;
}
/* Extract the non-negative offset exponent and fraction. Record
* whether the value is subnormal.
*/
char c = conv->specifier;
int expo = (u.u64 >> FRACTION_BITS) & BIT_MASK(EXPONENT_BITS);
uint64_t fract = u.u64 & BIT64_MASK(FRACTION_BITS);
bool is_subnormal = (expo == 0) && (fract != 0);
/* Exponent of all-ones signals infinity or NaN, which are
* text constants regardless of specifier.
*/
if (expo == BIT_MASK(EXPONENT_BITS)) {
if (fract == 0) {
if (isupper((unsigned char)c) != 0) {
buf[0] = 'I';
buf[1] = 'N';
buf[2] = 'F';
buf += 3;
} else {
buf[0] = 'i';
buf[1] = 'n';
buf[2] = 'f';
buf += 3;
}
} else {
if (isupper((unsigned char)c) != 0) {
buf[0] = 'N';
buf[1] = 'A';
buf[2] = 'N';
buf += 3;
} else {
buf[0] = 'n';
buf[1] = 'a';
buf[2] = 'n';
buf += 3;
}
}
/* No zero-padding with text values */
conv->flag_zero = false;
*bpe = buf;
return bps;
}
/* The case of an F specifier is no longer relevant. */
if (c == 'F') {
c = 'f';
}
/* Handle converting to the hex representation. */
if (IS_ENABLED(CONFIG_CBPRINTF_FP_A_SUPPORT)
&& (IS_ENABLED(CONFIG_CBPRINTF_FP_ALWAYS_A)
|| conv->specifier_a)) {
buf[0] = '0';
buf[1] = 'x';
buf += 2;
/* Remove the offset from the exponent, and store the
* non-fractional value. Subnormals require increasing the
* exponent as first bit isn't the implicit bit.
*/
expo -= 1023;
if (is_subnormal) {
*buf = '0';
++buf;
++expo;
} else {
*buf = '1';
++buf;
}
/* If we didn't get precision from a %a specification then we
* treat it as from a %a specification with no precision: full
* range, zero-pruning enabled.
*
* Otherwise we have to cap the precision of the generated
* fraction, or possibly round it.
*/
if (!(conv->specifier_a && conv->prec_present)) {
precision = FRACTION_HEX;
prune_zero = true;
} else if (precision > FRACTION_HEX) {
conv->pad0_pre_exp = precision - FRACTION_HEX;
conv->pad_fp = true;
precision = FRACTION_HEX;
} else if ((fract != 0)
&& (precision < FRACTION_HEX)) {
size_t pos = 4 * (FRACTION_HEX - precision) - 1;
uint64_t mask = BIT64(pos);
/* Round only if the bit that would round is
* set.
*/
if ((fract & mask) != 0ULL) {
fract += mask;
}
}
/* Record whether we must retain the decimal point even if we
* can prune zeros.
*/
bool require_dp = ((fract != 0) || conv->flag_hash);
if (require_dp || (precision != 0)) {
*buf = '.';
++buf;
}
/* Get the fractional value as a hexadecimal string, using x
* for a and X for A.
*/
struct conversion aconv = {
.specifier = isupper((unsigned char)c) != 0 ? 'X' : 'x',
};
const char *spe = *bpe;
char *sp = bps + (spe - bps);
if (fract != 0) {
sp = encode_uint(fract, &aconv, buf, spe);
}
/* Pad out to full range since this is below the decimal
* point.
*/
while ((spe - sp) < FRACTION_HEX) {
--sp;
*sp = '0';
}
/* Append the leading significant "digits". */
while ((sp < spe) && (precision > 0)) {
*buf = *sp;
++buf;
++sp;
--precision;
}
if (prune_zero) {
while (*--buf == '0') {
;
}
if ((*buf != '.') || require_dp) {
++buf;
}
}
*buf = 'p';
++buf;
if (expo >= 0) {
*buf = '+';
++buf;
} else {
*buf = '-';
++buf;
expo = -expo;
}
aconv.specifier = 'i';
sp = encode_uint(expo, &aconv, buf, spe);
while (sp < spe) {
*buf = *sp;
++buf;
++sp;
}
*bpe = buf;
return bps;
}
/* Remainder of code operates on a 64-bit fraction, so shift up (and
* discard garbage from the exponent where the implicit 1 would be
* stored).
*/
fract <<= EXPONENT_BITS;
fract &= ~SIGN_MASK;
/* Non-zero values need normalization. */
if ((expo | fract) != 0) {
if (is_subnormal) {
/* Fraction is subnormal. Normalize it and correct
* the exponent.
*/
for (fract <<= 1; (fract & BIT_63) == 0; fract <<= 1) {
expo--;
}
}
/* Adjust the offset exponent to be signed rather than offset,
* and set the implicit 1 bit in the (shifted) 53-bit
* fraction.
*/
expo -= (1023 - 1); /* +1 since .1 vs 1. */
fract |= BIT_63;
}
/*
* Let's consider:
*
* value = fract * 2^expo * 10^decexp
*
* Initially decexp = 0. The goal is to bring exp between
* 0 and -2 as the magnitude of a fractional decimal digit is 3 bits.
*/
int decexp = 0;
while (expo < -2) {
/*
* Make room to allow a multiplication by 5 without overflow.
* We test only the top part for faster code.
*/
do {
fract >>= 1;
expo++;
} while ((uint32_t)(fract >> 32) >= (UINT32_MAX / 5U));
/* Perform fract * 5 * 2 / 10 */
fract *= 5U;
expo++;
decexp--;
}
while (expo > 0) {
/*
* Perform fract / 5 / 2 * 10.
* The +2 is there to do round the result of the division
* by 5 not to lose too much precision in extreme cases.
*/
fract += 2;
_ldiv5(&fract);
expo--;
decexp++;
/* Bring back our fractional number to full scale */
do {
fract <<= 1;
expo--;
} while (!(fract & BIT_63));
}
/*
* The binary fractional point is located somewhere above bit 63.
* Move it between bits 59 and 60 to give 4 bits of room to the
* integer part.
*/
fract >>= (4 - expo);
if ((c == 'g') || (c == 'G')) {
/* Use the specified precision and exponent to select the
* representation and correct the precision and zero-pruning
* in accordance with the ISO C rule.
*/
if ((decexp < (-4 + 1)) || (decexp > precision)) {
c += 'e' - 'g'; /* e or E */
if (precision > 0) {
precision--;
}
} else {
c = 'f';
precision -= decexp;
}
if (!conv->flag_hash && (precision > 0)) {
prune_zero = true;
}
}
int decimals;
if (c == 'f') {
decimals = precision + decexp;
if (decimals < 0) {
decimals = 0;
}
} else {
decimals = precision + 1;
}
int digit_count = 16;
if (decimals > 16) {
decimals = 16;
}
/* Round the value to the last digit being printed. */
uint64_t round = BIT64(59); /* 0.5 */
while (decimals-- != 0) {
_ldiv10(&round);
}
fract += round;
/* Make sure rounding didn't make fract >= 1.0 */
if (fract >= BIT64(60)) {
_ldiv10(&fract);
decexp++;
}
if (c == 'f') {
if (decexp > 0) {
/* Emit the digits above the decimal point. */
while ((decexp > 0) && (digit_count > 0)) {
*buf = _get_digit(&fract, &digit_count);
++buf;
decexp--;
}
conv->pad0_value = decexp;
decexp = 0;
} else {
*buf = '0';
++buf;
}
/* Emit the decimal point only if required by the alternative
* format, or if more digits are to follow.
*/
if (conv->flag_hash || (precision > 0)) {
*buf = '.';
++buf;
}
if ((decexp < 0) && (precision > 0)) {
conv->pad0_value = -decexp;
if (conv->pad0_value > precision) {
conv->pad0_value = precision;
}
precision -= conv->pad0_value;
conv->pad_postdp = (conv->pad0_value > 0);
}
} else { /* e or E */
/* Emit the one digit before the decimal. If it's not zero,
* this is significant so reduce the base-10 exponent.
*/
*buf = _get_digit(&fract, &digit_count);
if (*buf++ != '0') {
decexp--;
}
/* Emit the decimal point only if required by the alternative
* format, or if more digits are to follow.
*/
if (conv->flag_hash || (precision > 0)) {
*buf = '.';
++buf;
}
}
while ((precision > 0) && (digit_count > 0)) {
*buf = _get_digit(&fract, &digit_count);
++buf;
precision--;
}
conv->pad0_pre_exp = precision;
if (prune_zero) {
conv->pad0_pre_exp = 0;
do {
--buf;
} while (*buf == '0');
if (*buf != '.') {
++buf;
}
}
/* Emit the explicit exponent, if format requires it. */
if ((c == 'e') || (c == 'E')) {
*buf = c;
++buf;
if (decexp < 0) {
decexp = -decexp;
*buf = '-';
++buf;
} else {
*buf = '+';
++buf;
}
/* At most 3 digits to the decimal. Spit them out. */
if (decexp >= 100) {
*buf = (decexp / 100) + '0';
++buf;
decexp %= 100;
}
buf[0] = (decexp / 10) + '0';
buf[1] = (decexp % 10) + '0';
buf += 2;
}
/* Cache whether there's padding required */
conv->pad_fp = (conv->pad0_value > 0)
|| (conv->pad0_pre_exp > 0);
/* Set the end of the encoded sequence, and return its start. Also
* store EOS as a non-digit/non-decimal value so we don't have to
* check against bpe when iterating in multiple places.
*/
*bpe = buf;
*buf = 0;
return bps;
}
/* Store a count into the pointer provided in a %n specifier.
*
* @param conv the specifier that indicates the size of the value into which
* the count will be stored.
*
* @param dp where the count should be stored.
*
* @param count the count to be stored.
*/
static inline void store_count(const struct conversion *conv,
void *dp,
int count)
{
switch ((enum length_mod_enum)conv->length_mod) {
case LENGTH_NONE:
*(int *)dp = count;
break;
case LENGTH_HH:
*(signed char *)dp = (signed char)count;
break;
case LENGTH_H:
*(short *)dp = (short)count;
break;
case LENGTH_L:
*(long *)dp = (long)count;
break;
case LENGTH_LL:
*(long long *)dp = (long long)count;
break;
case LENGTH_J:
*(intmax_t *)dp = (intmax_t)count;
break;
case LENGTH_Z:
*(size_t *)dp = (size_t)count;
break;
case LENGTH_T:
*(ptrdiff_t *)dp = (ptrdiff_t)count;
break;
default:
/* Add an empty default with break, this is a defensive programming.
* Static analysis tool won't raise a violation if default is empty,
* but has that comment.
*/
break;
}
}
/* Outline function to emit all characters in [sp, ep). */
static int outs(cbprintf_cb __out,
void *ctx,
const char *sp,
const char *ep)
{
size_t count = 0;
cbprintf_cb_local out = __out;
while ((sp < ep) || ((ep == NULL) && *sp)) {
int rc = out((int)*sp, ctx);
++sp;
if (rc < 0) {
return rc;
}
++count;
}
return (int)count;
}
int z_cbvprintf_impl(cbprintf_cb __out, void *ctx, const char *fp,
va_list ap, uint32_t flags)
{
char buf[CONVERTED_BUFLEN];
size_t count = 0;
sint_value_type sint;
cbprintf_cb_local out = __out;
const bool tagged_ap = (flags & Z_CBVPRINTF_PROCESS_FLAG_TAGGED_ARGS)
== Z_CBVPRINTF_PROCESS_FLAG_TAGGED_ARGS;
/* Output character, returning EOF if output failed, otherwise
* updating count.
*
* NB: c is evaluated exactly once: side-effects are OK
*/
#define OUTC(c) do { \
int rc = (*out)((int)(c), ctx); \
\
if (rc < 0) { \
return rc; \
} \
++count; \
} while (false)
/* Output sequence of characters, returning a negative error if output
* failed.
*/
#define OUTS(_sp, _ep) do { \
int rc = outs(out, ctx, (_sp), (_ep)); \
\
if (rc < 0) { \
return rc; \
} \
count += rc; \
} while (false)
while (*fp != 0) {
if (*fp != '%') {
OUTC(*fp);
++fp;
continue;
}
/* Force union into RAM with conversion state to
* mitigate LLVM code generation bug.
*/
struct {
union argument_value value;
struct conversion conv;
} state = {
.value = {
.uint = 0,
},
};
struct conversion *const conv = &state.conv;
union argument_value *const value = &state.value;
const char *sp = fp;
int width = -1;
int precision = -1;
const char *bps = NULL;
const char *bpe = buf + sizeof(buf);
char sign = 0;
fp = extract_conversion(conv, sp);
if (conv->specifier_cat != SPECIFIER_INVALID) {
if (IS_ENABLED(CONFIG_CBPRINTF_PACKAGE_SUPPORT_TAGGED_ARGUMENTS)
&& tagged_ap) {
/* Skip over the argument tag as it is not being
* used here.
*/
(void)va_arg(ap, int);
}
}
/* If dynamic width is specified, process it,
* otherwise set width if present.
*/
if (conv->width_star) {
width = va_arg(ap, int);
if (width < 0) {
conv->flag_dash = true;
width = -width;
}
} else if (conv->width_present) {
width = conv->width_value;
} else {
;
}
/* If dynamic precision is specified, process it, otherwise
* set precision if present. For floating point where
* precision is not present use 6.
*/
if (conv->prec_star) {
int arg = va_arg(ap, int);
if (arg < 0) {
conv->prec_present = false;
} else {
precision = arg;
}
} else if (conv->prec_present) {
precision = conv->prec_value;
} else {
;
}
/* Reuse width and precision memory in conv for value
* padding counts.
*/
conv->pad0_value = 0;
conv->pad0_pre_exp = 0;
/* FP conversion requires knowing the precision. */
if (IS_ENABLED(CONFIG_CBPRINTF_FP_SUPPORT)
&& (conv->specifier_cat == SPECIFIER_FP)
&& !conv->prec_present) {
if (conv->specifier_a) {
precision = FRACTION_HEX;
} else {
precision = 6;
}
}
/* Get the value to be converted from the args.
*
* This can't be extracted to a helper function because
* passing a pointer to va_list doesn't work on x86_64. See
* https://stackoverflow.com/a/8048892.
*/
enum specifier_cat_enum specifier_cat
= (enum specifier_cat_enum)conv->specifier_cat;
enum length_mod_enum length_mod
= (enum length_mod_enum)conv->length_mod;
/* Extract the value based on the argument category and length.
*
* Note that the length modifier doesn't affect the value of a
* pointer argument.
*/
if (specifier_cat == SPECIFIER_SINT) {
switch (length_mod) {
default:
case LENGTH_NONE:
case LENGTH_HH:
case LENGTH_H:
value->sint = va_arg(ap, int);
break;
case LENGTH_L:
if (WCHAR_IS_SIGNED
&& (conv->specifier == 'c')) {
value->sint = (wchar_t)va_arg(ap,
WINT_TYPE);
} else {
value->sint = va_arg(ap, long);
}
break;
case LENGTH_LL:
value->sint =
(sint_value_type)va_arg(ap, long long);
break;
case LENGTH_J:
value->sint =
(sint_value_type)va_arg(ap, intmax_t);
break;
case LENGTH_Z: /* size_t */
case LENGTH_T: /* ptrdiff_t */
/* Though ssize_t is the signed equivalent of
* size_t for POSIX, there is no uptrdiff_t.
* Assume that size_t and ptrdiff_t are the
* unsigned and signed equivalents of each
* other. This can be checked in a platform
* test.
*/
value->sint =
(sint_value_type)va_arg(ap, ptrdiff_t);
break;
}
if (length_mod == LENGTH_HH) {
value->sint = (signed char)value->sint;
} else if (length_mod == LENGTH_H) {
value->sint = (short)value->sint;
}
} else if (specifier_cat == SPECIFIER_UINT) {
switch (length_mod) {
default:
case LENGTH_NONE:
case LENGTH_HH:
case LENGTH_H:
value->uint = va_arg(ap, unsigned int);
break;
case LENGTH_L:
if ((!WCHAR_IS_SIGNED)
&& (conv->specifier == 'c')) {
value->uint = (wchar_t)va_arg(ap,
WINT_TYPE);
} else {
value->uint = va_arg(ap, unsigned long);
}
break;
case LENGTH_LL:
value->uint =
(uint_value_type)va_arg(ap,
unsigned long long);
break;
case LENGTH_J:
value->uint =
(uint_value_type)va_arg(ap,
uintmax_t);
break;
case LENGTH_Z: /* size_t */
case LENGTH_T: /* ptrdiff_t */
value->uint =
(uint_value_type)va_arg(ap, size_t);
break;
}
if (length_mod == LENGTH_HH) {
value->uint = (unsigned char)value->uint;
} else if (length_mod == LENGTH_H) {
value->uint = (unsigned short)value->uint;
}
} else if (specifier_cat == SPECIFIER_FP) {
if (length_mod == LENGTH_UPPER_L) {
value->ldbl = va_arg(ap, long double);
} else {
value->dbl = va_arg(ap, double);
}
} else if (specifier_cat == SPECIFIER_PTR) {
value->ptr = va_arg(ap, void *);
}
/* We've now consumed all arguments related to this
* specification. If the conversion is invalid, or is
* something we don't support, then output the original
* specification and move on.
*/
if (conv->invalid || conv->unsupported) {
OUTS(sp, fp);
continue;
}
/* Do formatting, either into the buffer or
* referencing external data.
*/
switch (conv->specifier) {
case '%':
OUTC('%');
break;
case 's': {
bps = (const char *)value->ptr;
size_t len;
if (precision >= 0) {
len = strnlen(bps, precision);
} else {
len = strlen(bps);
}
bpe = bps + len;
precision = -1;
break;
}
case 'p':
/* Implementation-defined: null is "(nil)", non-null
* has 0x prefix followed by significant address hex
* digits, no leading zeros.
*/
if (value->ptr != NULL) {
bps = encode_uint((uintptr_t)value->ptr, conv,
buf, bpe);
/* Use 0x prefix */
conv->altform_0c = true;
conv->specifier = 'x';
goto prec_int_pad0;
}
bps = "(nil)";
bpe = bps + 5;
break;
case 'c':
bps = buf;
buf[0] = CHAR_IS_SIGNED ? value->sint : value->uint;
bpe = buf + 1;
break;
case 'd':
case 'i':
if (conv->flag_plus) {
sign = '+';
} else if (conv->flag_space) {
sign = ' ';
}
/* sint/uint overlay in the union, and so
* can't appear in read and write operations
* in the same statement.
*/
sint = value->sint;
if (sint < 0) {
sign = '-';
value->uint = (uint_value_type)-sint;
} else {
value->uint = (uint_value_type)sint;
}
__fallthrough;
case 'o':
case 'u':
case 'x':
case 'X':
bps = encode_uint(value->uint, conv, buf, bpe);
prec_int_pad0:
/* Update pad0 values based on precision and converted
* length. Note that a non-empty sign is not in the
* converted sequence, but it does not affect the
* padding size.
*/
if (precision >= 0) {
size_t len = bpe - bps;
/* Zero-padding flag is ignored for integer
* conversions with precision.
*/
conv->flag_zero = false;
/* Set pad0_value to satisfy precision */
if (len < (size_t)precision) {
conv->pad0_value = precision - (int)len;
}
}
break;
case 'n':
if (IS_ENABLED(CONFIG_CBPRINTF_N_SPECIFIER)) {
store_count(conv, value->ptr, count);
}
break;
case FP_CONV_CASES:
if (IS_ENABLED(CONFIG_CBPRINTF_FP_SUPPORT)) {
bps = encode_float(value->dbl, conv, precision,
&sign, buf, &bpe);
}
break;
default:
/* Add an empty default with break, this is a defensive
* programming. Static analysis tool won't raise a violation
* if default is empty, but has that comment.
*/
break;
}
/* If we don't have a converted value to emit, move
* on.
*/
if (bps == NULL) {
continue;
}
/* The converted value is now stored in [bps, bpe), excluding
* any required zero padding.
*
* The unjustified output will be:
*
* * any sign character (sint-only)
* * any altform prefix
* * for FP:
* * any pre-decimal content from the converted value
* * any pad0_value padding (!postdp)
* * any decimal point in the converted value
* * any pad0_value padding (postdp)
* * any pre-exponent content from the converted value
* * any pad0_pre_exp padding
* * any exponent content from the converted value
* * for non-FP:
* * any pad0_prefix
* * the converted value
*/
size_t nj_len = (bpe - bps);
int pad_len = 0;
if (sign != 0) {
nj_len += 1U;
}
if (conv->altform_0c) {
nj_len += 2U;
} else if (conv->altform_0) {
nj_len += 1U;
}
nj_len += conv->pad0_value;
if (conv->pad_fp) {
nj_len += conv->pad0_pre_exp;
}
/* If we have a width update width to hold the padding we need
* for justification. The result may be negative, which will
* result in no padding.
*
* If a non-negative padding width is present and we're doing
* right-justification, emit the padding now.
*/
if (width > 0) {
width -= (int)nj_len;
if (!conv->flag_dash) {
char pad = ' ';
/* If we're zero-padding we have to emit the
* sign first.
*/
if (conv->flag_zero) {
if (sign != 0) {
OUTC(sign);
sign = 0;
}
pad = '0';
}
while (width-- > 0) {
OUTC(pad);
}
}
}
/* If we have a sign that hasn't been emitted, now's the
* time....
*/
if (sign != 0) {
OUTC(sign);
}
if (IS_ENABLED(CONFIG_CBPRINTF_FP_SUPPORT) && conv->pad_fp) {
const char *cp = bps;
if (conv->specifier_a) {
/* Only padding is pre_exp */
while (*cp != 'p') {
OUTC(*cp);
++cp;
}
} else {
while (isdigit((unsigned char)*cp) != 0) {
OUTC(*cp);
++cp;
}
pad_len = conv->pad0_value;
if (!conv->pad_postdp) {
while (pad_len-- > 0) {
OUTC('0');
}
}
if (*cp == '.') {
OUTC(*cp);
++cp;
/* Remaining padding is
* post-dp.
*/
while (pad_len-- > 0) {
OUTC('0');
}
}
while (isdigit((unsigned char)*cp) != 0) {
OUTC(*cp);
++cp;
}
}
pad_len = conv->pad0_pre_exp;
while (pad_len-- > 0) {
OUTC('0');
}
OUTS(cp, bpe);
} else {
if ((conv->altform_0c | conv->altform_0) != 0) {
OUTC('0');
}
if (conv->altform_0c) {
OUTC(conv->specifier);
}
pad_len = conv->pad0_value;
while (pad_len-- > 0) {
OUTC('0');
}
OUTS(bps, bpe);
}
/* Finish left justification */
while (width > 0) {
OUTC(' ');
--width;
}
}
return count;
#undef OUTS
#undef OUTC
}