| # Copyright (c) 2018, Cypress |
| # Copyright (c) 2020, ATL Electronics |
| # Copyright (c) 2022 Cypress Semiconductor Corporation (an Infineon company) or |
| # an affiliate of Cypress Semiconductor Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: Infineon CAT1 UART |
| |
| compatible: "infineon,cat1-uart" |
| |
| include: [uart-controller.yaml, pinctrl-device.yaml, "infineon,cat1-scb.yaml"] |
| |
| properties: |
| reg: |
| required: true |
| |
| interrupts: |
| required: true |
| |
| pinctrl-0: |
| description: | |
| PORT pin configuration for TX, RX, RTS, CTS signals. |
| We expect that the phandles will reference pinctrl nodes. These |
| nodes will have a nodelabel that matches the Infineon SoC Pinctrl |
| defines and be of the form p<port>_<pin><peripheral inst>_<signal>. |
| |
| Examples |
| use TX, RX |
| pinctrl-0 = <&p5_1_scb5_uart_tx &p5_0_scb5_uart_rx>; |
| |
| use RX only |
| pinctrl-0 = <&p5_0_scb5_uart_rx>; |
| |
| use TX, RX, RTS, CTS |
| pinctrl-0 = <&p3_1_scb2_uart_tx &p3_0_scb2_uart_rx |
| &p3_2_scb2_uart_rts &p3_3_scb2_uart_cts>; |
| required: true |
| |
| pinctrl-names: |
| required: true |
