| /* |
| * Copyright (c) 2019-2022 Actinius |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include "actinius_icarus_common-pinctrl.dtsi" |
| |
| / { |
| model = "Actinius Icarus IoT Dev Board"; |
| compatible = "actinius,icarus"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| red_led: led_0 { |
| gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| label = "Red LED"; |
| }; |
| |
| green_led: led_1 { |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| label = "Green LED"; |
| }; |
| |
| blue_led: led_2 { |
| gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
| label = "Blue LED"; |
| }; |
| }; |
| |
| pwmleds { |
| compatible = "pwm-leds"; |
| |
| red_pwm_led: led_pwm_0 { |
| pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>; |
| label = "Red PWM LED"; |
| }; |
| |
| green_pwm_led: led_pwm_1 { |
| pwms = <&pwm0 1 PWM_MSEC(20) PWM_POLARITY_INVERTED>; |
| label = "Green PWM LED"; |
| }; |
| |
| blue_pwm_led: led_pwm_2 { |
| pwms = <&pwm0 2 PWM_MSEC(20) PWM_POLARITY_INVERTED>; |
| label = "Blue PWM LED"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| |
| button0: button_0 { |
| gpios = <&gpio0 5 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push Button 1"; |
| }; |
| }; |
| |
| aliases { |
| led0 = &red_led; |
| led1 = &green_led; |
| led2 = &blue_led; |
| pwm-led0 = &red_pwm_led; |
| pwm-led1 = &green_pwm_led; |
| pwm-led2 = &blue_pwm_led; |
| red-pwm-led = &red_pwm_led; |
| green-pwm-led = &green_pwm_led; |
| blue-pwm-led = &blue_pwm_led; |
| sw0 = &button0; |
| bootloader-led0 = &blue_led; |
| mcuboot-button0 = &button0; |
| mcuboot-led0 = &blue_led; |
| watchdog0 = &wdt0; |
| accel0 = &lis2dh12_accel; |
| }; |
| |
| vbatt { |
| compatible = "voltage-divider"; |
| io-channels = <&adc 0>; |
| output-ohms = <10000000>; |
| full-ohms = <(10000000 + 4700000)>; |
| }; |
| |
| sim_select: sim-select { |
| compatible = "actinius-sim-select"; |
| sim-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; |
| sim = "esim"; |
| }; |
| }; |
| |
| &adc { |
| status ="okay"; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| |
| current-speed = <115200>; |
| pinctrl-0 = <&uart0_default>; |
| pinctrl-1 = <&uart0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| |
| current-speed = <115200>; |
| pinctrl-0 = <&uart1_default>; |
| pinctrl-1 = <&uart1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &uart2 { |
| current-speed = <115200>; |
| pinctrl-0 = <&uart2_default>; |
| pinctrl-1 = <&uart2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &i2c2 { |
| compatible = "nordic,nrf-twim"; |
| status = "okay"; |
| |
| clock-frequency = <I2C_BITRATE_FAST>; |
| |
| pinctrl-0 = <&i2c2_default>; |
| pinctrl-1 = <&i2c2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| lis2dh12_accel: lis2dh12-accel@19 { |
| compatible = "st,lis2dh12", "st,lis2dh"; |
| reg = <0x19>; |
| irq-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>, |
| <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &spi3 { |
| compatible = "nordic,nrf-spim"; |
| status = "okay"; |
| |
| pinctrl-0 = <&spi3_default>; |
| pinctrl-1 = <&spi3_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| pinctrl-0 = <&pwm0_default>; |
| pinctrl-1 = <&pwm0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &timer0 { |
| status = "okay"; |
| }; |
| |
| &timer1 { |
| status = "okay"; |
| }; |
| |
| &timer2 { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0x10000>; |
| }; |
| slot0_partition: partition@10000 { |
| label = "image-0"; |
| }; |
| slot0_ns_partition: partition@50000 { |
| label = "image-0-nonsecure"; |
| }; |
| slot1_partition: partition@80000 { |
| label = "image-1"; |
| }; |
| slot1_ns_partition: partition@c0000 { |
| label = "image-1-nonsecure"; |
| }; |
| scratch_partition: partition@f0000 { |
| label = "image-scratch"; |
| reg = <0x000f0000 0xa000>; |
| }; |
| storage_partition: partition@fa000 { |
| label = "storage"; |
| reg = <0x000fa000 0x00006000>; |
| }; |
| }; |
| }; |
| |
| / { |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram0_s: image_s@20000000 { |
| /* Secure image memory */ |
| }; |
| |
| sram0_modem: image_modem@20016000 { |
| /* Modem (shared) memory */ |
| }; |
| |
| sram0_ns: image_ns@20020000 { |
| /* Non-Secure image memory */ |
| }; |
| }; |
| }; |
| |
| /* Include file with mappings and aliases for feather compatibility */ |
| #include "feather_connector.dtsi" |
| |
| /* Include partition configuration file */ |
| #include "actinius_icarus_partition_conf.dts" |