| # Copyright (c) 2023 Espressif Systems (Shanghai) Co., Ltd. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config SOC_SERIES_ESP32S2 |
| select XTENSA |
| select ATOMIC_OPERATIONS_C |
| select DYNAMIC_INTERRUPTS |
| select CLOCK_CONTROL |
| select PINCTRL |
| select XIP if !MCUBOOT |
| select HAS_ESPRESSIF_HAL |
| select ARCH_SUPPORTS_COREDUMP |
| select HAS_PM |
| select HAS_POWEROFF |
| |
| if SOC_SERIES_ESP32S2 |
| |
| config IDF_TARGET_ESP32S2 |
| bool "ESP32S2 as target SOC" |
| default y |
| |
| menu "Cache config" |
| |
| choice |
| prompt "Instruction cache line size" |
| default ESP32S2_INSTRUCTION_CACHE_LINE_32B |
| |
| config ESP32S2_INSTRUCTION_CACHE_LINE_16B |
| bool "16 Bytes" |
| |
| config ESP32S2_INSTRUCTION_CACHE_LINE_32B |
| bool "32 Bytes" |
| |
| endchoice |
| |
| choice |
| prompt "Instruction cache size" |
| default ESP32S2_INSTRUCTION_CACHE_8KB |
| |
| config ESP32S2_INSTRUCTION_CACHE_8KB |
| bool "8KB instruction cache size" |
| |
| config ESP32S2_INSTRUCTION_CACHE_16KB |
| bool "16KB instruction cache size" |
| |
| endchoice |
| |
| choice ESP32S2_DATA_CACHE_SIZE |
| prompt "Data cache size" |
| default ESP32S2_DATA_CACHE_8KB |
| help |
| Data cache size to be set on application startup. |
| config ESP32S2_DATA_CACHE_0KB |
| depends on !ESP_SPIRAM |
| bool "0KB" |
| config ESP32S2_DATA_CACHE_8KB |
| bool "8KB" |
| config ESP32S2_DATA_CACHE_16KB |
| bool "16KB" |
| |
| endchoice |
| |
| choice |
| prompt "Data cache line size" |
| default ESP32S2_DATA_CACHE_LINE_32B |
| |
| config ESP32S2_DATA_CACHE_LINE_16B |
| bool "16 Bytes" |
| |
| config ESP32S2_DATA_CACHE_LINE_32B |
| bool "32 Bytes" |
| |
| endchoice |
| |
| config ESP32S2_INSTRUCTION_CACHE_SIZE |
| hex |
| default 0x4000 if ESP32S2_INSTRUCTION_CACHE_16KB |
| default 0x2000 |
| |
| config ESP32S2_DATA_CACHE_SIZE |
| hex |
| default 0x2000 if ESP32S2_DATA_CACHE_8KB |
| default 0x4000 if ESP32S2_DATA_CACHE_16KB |
| default 0x0000 |
| |
| endmenu # Cache config |
| |
| config ESP32_PHY_MAX_WIFI_TX_POWER |
| int "Max WiFi TX power (dBm)" |
| range 10 20 |
| default 20 |
| help |
| Set maximum transmit power for WiFi radio. Actual transmit power for high |
| data rates may be lower than this setting. |
| |
| config ESP32_PHY_MAX_TX_POWER |
| int |
| default ESP32_PHY_MAX_WIFI_TX_POWER |
| |
| endif # SOC_SERIES_ESP32S2 |
