drivers/adc/adc_nrfx_saadc.c

/*
 * Copyright (c) 2018 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#define ADC_CONTEXT_USES_KERNEL_TIMER
#include "adc_context.h"
#include <haly/nrfy_saadc.h>
#include <zephyr/dt-bindings/adc/nrf-saadc-v3.h>
#include <zephyr/dt-bindings/adc/nrf-saadc-nrf54l.h>
#include <zephyr/linker/devicetree_regions.h>

#define LOG_LEVEL CONFIG_ADC_LOG_LEVEL
#include <zephyr/logging/log.h>
#include <zephyr/irq.h>
LOG_MODULE_REGISTER(adc_nrfx_saadc);

#define DT_DRV_COMPAT nordic_nrf_saadc

#if (NRF_SAADC_HAS_AIN_AS_PIN)

#if defined(CONFIG_NRF_PLATFORM_HALTIUM)
static const uint8_t saadc_psels[NRF_SAADC_AIN7 + 1] = {
	[NRF_SAADC_AIN0] = NRF_PIN_PORT_TO_PIN_NUMBER(0U, 1),
	[NRF_SAADC_AIN1] = NRF_PIN_PORT_TO_PIN_NUMBER(1U, 1),
	[NRF_SAADC_AIN2] = NRF_PIN_PORT_TO_PIN_NUMBER(2U, 1),
	[NRF_SAADC_AIN3] = NRF_PIN_PORT_TO_PIN_NUMBER(3U, 1),
	[NRF_SAADC_AIN4] = NRF_PIN_PORT_TO_PIN_NUMBER(4U, 1),
	[NRF_SAADC_AIN5] = NRF_PIN_PORT_TO_PIN_NUMBER(5U, 1),
	[NRF_SAADC_AIN6] = NRF_PIN_PORT_TO_PIN_NUMBER(6U, 1),
	[NRF_SAADC_AIN7] = NRF_PIN_PORT_TO_PIN_NUMBER(7U, 1),
};
#elif defined(CONFIG_SOC_NRF54L15)
static const uint32_t saadc_psels[NRF_SAADC_DVDD + 1] = {
	[NRF_SAADC_AIN0] = NRF_PIN_PORT_TO_PIN_NUMBER(4U, 1),
	[NRF_SAADC_AIN1] = NRF_PIN_PORT_TO_PIN_NUMBER(5U, 1),
	[NRF_SAADC_AIN2] = NRF_PIN_PORT_TO_PIN_NUMBER(6U, 1),
	[NRF_SAADC_AIN3] = NRF_PIN_PORT_TO_PIN_NUMBER(7U, 1),
	[NRF_SAADC_AIN4] = NRF_PIN_PORT_TO_PIN_NUMBER(11U, 1),
	[NRF_SAADC_AIN5] = NRF_PIN_PORT_TO_PIN_NUMBER(12U, 1),
	[NRF_SAADC_AIN6] = NRF_PIN_PORT_TO_PIN_NUMBER(13U, 1),
	[NRF_SAADC_AIN7] = NRF_PIN_PORT_TO_PIN_NUMBER(14U, 1),
	[NRF_SAADC_VDD]  = NRF_SAADC_INPUT_VDD,
	[NRF_SAADC_AVDD] = NRF_SAADC_INPUT_AVDD,
	[NRF_SAADC_DVDD] = NRF_SAADC_INPUT_DVDD,
};
#endif

#else
BUILD_ASSERT((NRF_SAADC_AIN0 == NRF_SAADC_INPUT_AIN0) &&
	     (NRF_SAADC_AIN1 == NRF_SAADC_INPUT_AIN1) &&
	     (NRF_SAADC_AIN2 == NRF_SAADC_INPUT_AIN2) &&
	     (NRF_SAADC_AIN3 == NRF_SAADC_INPUT_AIN3) &&
	     (NRF_SAADC_AIN4 == NRF_SAADC_INPUT_AIN4) &&
	     (NRF_SAADC_AIN5 == NRF_SAADC_INPUT_AIN5) &&
	     (NRF_SAADC_AIN6 == NRF_SAADC_INPUT_AIN6) &&
	     (NRF_SAADC_AIN7 == NRF_SAADC_INPUT_AIN7) &&
#if defined(SAADC_CH_PSELP_PSELP_VDDHDIV5)
	     (NRF_SAADC_VDDHDIV5 == NRF_SAADC_INPUT_VDDHDIV5) &&
#endif
#if defined(SAADC_CH_PSELP_PSELP_VDD)
	     (NRF_SAADC_VDD == NRF_SAADC_INPUT_VDD) &&
#endif
	     1,
	     "Definitions from nrf-adc.h do not match those from nrf_saadc.h");
#endif

#if defined(CONFIG_NRF_PLATFORM_HALTIUM)

/* Haltium devices always use bounce buffers in RAM */

#define SAADC_MEMORY_SECTION					                     \
	COND_CODE_1(DT_NODE_HAS_PROP(DT_NODELABEL(adc), memory_regions), \
		(__attribute__((__section__(LINKER_DT_NODE_REGION_NAME(	     \
			DT_PHANDLE(DT_NODELABEL(adc), memory_regions)))))),	     \
		())

static uint16_t adc_samples_buffer[SAADC_CH_NUM] SAADC_MEMORY_SECTION;

#define ADC_BUFFER_IN_RAM

#endif /* defined(CONFIG_NRF_PLATFORM_HALTIUM) */

struct driver_data {
	struct adc_context ctx;

	uint8_t positive_inputs[SAADC_CH_NUM];
	uint8_t single_ended_channels;

#if defined(ADC_BUFFER_IN_RAM)
	void *samples_buffer;
	void *user_buffer;
	uint8_t active_channels;
#endif
};

static struct driver_data m_data = {
	ADC_CONTEXT_INIT_TIMER(m_data, ctx),
	ADC_CONTEXT_INIT_LOCK(m_data, ctx),
	ADC_CONTEXT_INIT_SYNC(m_data, ctx),
#if defined(ADC_BUFFER_IN_RAM)
	.samples_buffer = adc_samples_buffer,
#endif
};

/* Helper function to convert number of samples to the byte representation. */
static uint32_t samples_to_bytes(const struct adc_sequence *sequence, uint16_t number_of_samples)
{
	if (NRF_SAADC_8BIT_SAMPLE_WIDTH == 8 && sequence->resolution == 8) {
		return number_of_samples;
	}

	return number_of_samples * 2;
}

/* Helper function to convert acquisition time to register TACQ value. */
static int adc_convert_acq_time(uint16_t acquisition_time, nrf_saadc_acqtime_t *p_tacq_val)
{
	int result = 0;

#if NRF_SAADC_HAS_ACQTIME_ENUM
	switch (acquisition_time) {
	case ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 3):
		*p_tacq_val = NRF_SAADC_ACQTIME_3US;
		break;
	case ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 5):
		*p_tacq_val = NRF_SAADC_ACQTIME_5US;
		break;
	case ADC_ACQ_TIME_DEFAULT:
	case ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 10):
		*p_tacq_val = NRF_SAADC_ACQTIME_10US;
		break;
	case ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 15):
		*p_tacq_val = NRF_SAADC_ACQTIME_15US;
		break;
	case ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 20):
		*p_tacq_val = NRF_SAADC_ACQTIME_20US;
		break;
	case ADC_ACQ_TIME_MAX:
	case ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 40):
		*p_tacq_val = NRF_SAADC_ACQTIME_40US;
		break;
	default:
		result = -EINVAL;
	}
#else
#define MINIMUM_ACQ_TIME_IN_NS 125
#define DEFAULT_ACQ_TIME_IN_NS 10000

	nrf_saadc_acqtime_t tacq = 0;
	uint16_t acq_time =
		(acquisition_time == ADC_ACQ_TIME_DEFAULT
			 ? DEFAULT_ACQ_TIME_IN_NS
			 : (ADC_ACQ_TIME_VALUE(acquisition_time) *
			    (ADC_ACQ_TIME_UNIT(acquisition_time) == ADC_ACQ_TIME_MICROSECONDS
				     ? 1000
				     : 1)));

	tacq = (nrf_saadc_acqtime_t)(acq_time / MINIMUM_ACQ_TIME_IN_NS) - 1;
	if ((tacq > NRF_SAADC_ACQTIME_MAX) || (acq_time < MINIMUM_ACQ_TIME_IN_NS)) {
		result = -EINVAL;
	} else {
		*p_tacq_val = tacq;
	}
#endif

	return result;
}

/* Implementation of the ADC driver API function: adc_channel_setup. */
static int adc_nrfx_channel_setup(const struct device *dev,
				  const struct adc_channel_cfg *channel_cfg)
{
	nrf_saadc_channel_config_t config = {
#if NRF_SAADC_HAS_CH_CONFIG_RES
		.resistor_p     = NRF_SAADC_RESISTOR_DISABLED,
		.resistor_n     = NRF_SAADC_RESISTOR_DISABLED,
#endif
		.burst          = NRF_SAADC_BURST_DISABLED,
	};
	uint8_t channel_id = channel_cfg->channel_id;
	uint32_t input_negative = channel_cfg->input_negative;

	if (channel_id >= SAADC_CH_NUM) {
		return -EINVAL;
	}

	switch (channel_cfg->gain) {
#if defined(SAADC_CH_CONFIG_GAIN_Gain1_6)
	case ADC_GAIN_1_6:
		config.gain = NRF_SAADC_GAIN1_6;
		break;
#endif
#if defined(SAADC_CH_CONFIG_GAIN_Gain1_5)
	case ADC_GAIN_1_5:
		config.gain = NRF_SAADC_GAIN1_5;
		break;
#endif
#if defined(SAADC_CH_CONFIG_GAIN_Gain1_4) || defined(SAADC_CH_CONFIG_GAIN_Gain2_8)
	case ADC_GAIN_1_4:
		config.gain = NRF_SAADC_GAIN1_4;
		break;
#endif
#if defined(SAADC_CH_CONFIG_GAIN_Gain1_3) || defined(SAADC_CH_CONFIG_GAIN_Gain2_6)
	case ADC_GAIN_1_3:
		config.gain = NRF_SAADC_GAIN1_3;
		break;
#endif
#if defined(SAADC_CH_CONFIG_GAIN_Gain2_5)
	case ADC_GAIN_2_5:
		config.gain = NRF_SAADC_GAIN2_5;
		break;
#endif
#if defined(SAADC_CH_CONFIG_GAIN_Gain1_2) || defined(SAADC_CH_CONFIG_GAIN_Gain2_4)
	case ADC_GAIN_1_2:
		config.gain = NRF_SAADC_GAIN1_2;
		break;
#endif
#if defined(SAADC_CH_CONFIG_GAIN_Gain2_3)
	case ADC_GAIN_2_3:
		config.gain = NRF_SAADC_GAIN2_3;
		break;
#endif
	case ADC_GAIN_1:
		config.gain = NRF_SAADC_GAIN1;
		break;
	case ADC_GAIN_2:
		config.gain = NRF_SAADC_GAIN2;
		break;
#if defined(SAADC_CH_CONFIG_GAIN_Gain4)
	case ADC_GAIN_4:
		config.gain = NRF_SAADC_GAIN4;
		break;
#endif
	default:
		LOG_ERR("Selected ADC gain is not valid");
		return -EINVAL;
	}

	switch (channel_cfg->reference) {
#if defined(SAADC_CH_CONFIG_REFSEL_Internal)
	case ADC_REF_INTERNAL:
		config.reference = NRF_SAADC_REFERENCE_INTERNAL;
		break;
#endif
#if defined(SAADC_CH_CONFIG_REFSEL_VDD1_4)
	case ADC_REF_VDD_1_4:
		config.reference = NRF_SAADC_REFERENCE_VDD4;
		break;
#endif
#if defined(SAADC_CH_CONFIG_REFSEL_External)
	case ADC_REF_EXTERNAL0:
		config.reference = NRF_SAADC_REFERENCE_EXTERNAL;
		break;
#endif
	default:
		LOG_ERR("Selected ADC reference is not valid");
		return -EINVAL;
	}

	int ret = adc_convert_acq_time(channel_cfg->acquisition_time, &config.acq_time);

	if (ret) {
		LOG_ERR("Selected ADC acquisition time is not valid");
		return -EINVAL;
	}

	/* Store channel mode to allow correcting negative readings in single-ended mode
	 * after ADC sequence ends.
	 */
	if (channel_cfg->differential) {
		config.mode = NRF_SAADC_MODE_DIFFERENTIAL;
		m_data.single_ended_channels &= ~BIT(channel_cfg->channel_id);
	} else {
		config.mode = NRF_SAADC_MODE_SINGLE_ENDED;
		m_data.single_ended_channels |= BIT(channel_cfg->channel_id);
	}

#if (NRF_SAADC_HAS_AIN_AS_PIN)
	if ((channel_cfg->input_positive >= ARRAY_SIZE(saadc_psels)) ||
	    (channel_cfg->input_positive < NRF_SAADC_AIN0)) {
		return -EINVAL;
	}

	if (config.mode == NRF_SAADC_MODE_DIFFERENTIAL) {
		if (input_negative > NRF_SAADC_AIN7 ||
		    input_negative < NRF_SAADC_AIN0) {
			return -EINVAL;
		}

		input_negative = saadc_psels[input_negative];
	} else {
		input_negative = NRF_SAADC_INPUT_DISABLED;
	}
#endif
	/* Store the positive input selection in a dedicated array,
	 * to get it later when the channel is selected for a sampling
	 * and to mark the channel as configured (ready to be selected).
	 */
	m_data.positive_inputs[channel_id] = channel_cfg->input_positive;

	nrf_saadc_channel_init(NRF_SAADC, channel_id, &config);
	/* Keep the channel disabled in hardware (set positive input to
	 * NRF_SAADC_INPUT_DISABLED) until it is selected to be included
	 * in a sampling sequence.
	 */
	nrf_saadc_channel_input_set(NRF_SAADC,
				    channel_id,
				    NRF_SAADC_INPUT_DISABLED,
				    input_negative);

	return 0;
}

static void adc_context_start_sampling(struct adc_context *ctx)
{
	nrf_saadc_enable(NRF_SAADC);

	if (ctx->sequence.calibrate) {
		nrf_saadc_task_trigger(NRF_SAADC,
				       NRF_SAADC_TASK_CALIBRATEOFFSET);
	} else {
		nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_START);
		nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_SAMPLE);
	}
}

static void adc_context_update_buffer_pointer(struct adc_context *ctx,
					      bool repeat)
{
	ARG_UNUSED(ctx);

	if (!repeat) {
#if defined(ADC_BUFFER_IN_RAM)
		m_data.user_buffer = (uint8_t *)m_data.user_buffer +
			samples_to_bytes(&ctx->sequence, nrfy_saadc_amount_get(NRF_SAADC));
#else
		nrf_saadc_value_t *buffer =
			(uint8_t *)nrf_saadc_buffer_pointer_get(NRF_SAADC) +
			samples_to_bytes(&ctx->sequence, nrfy_saadc_amount_get(NRF_SAADC));
		nrfy_saadc_buffer_pointer_set(NRF_SAADC, buffer);
#endif
	}
}

static int set_resolution(const struct adc_sequence *sequence)
{
	nrf_saadc_resolution_t nrf_resolution;

	switch (sequence->resolution) {
	case  8:
		nrf_resolution = NRF_SAADC_RESOLUTION_8BIT;
		break;
	case 10:
		nrf_resolution = NRF_SAADC_RESOLUTION_10BIT;
		break;
	case 12:
		nrf_resolution = NRF_SAADC_RESOLUTION_12BIT;
		break;
	case 14:
		nrf_resolution = NRF_SAADC_RESOLUTION_14BIT;
		break;
	default:
		LOG_ERR("ADC resolution value %d is not valid",
			    sequence->resolution);
		return -EINVAL;
	}

	nrf_saadc_resolution_set(NRF_SAADC, nrf_resolution);
	return 0;
}

static int set_oversampling(const struct adc_sequence *sequence,
			    uint8_t active_channels)
{
	nrf_saadc_oversample_t nrf_oversampling;

	if ((active_channels > 1) && (sequence->oversampling > 0)) {
		LOG_ERR(
			"Oversampling is supported for single channel only");
		return -EINVAL;
	}

	switch (sequence->oversampling) {
	case 0:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_DISABLED;
		break;
	case 1:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_2X;
		break;
	case 2:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_4X;
		break;
	case 3:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_8X;
		break;
	case 4:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_16X;
		break;
	case 5:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_32X;
		break;
	case 6:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_64X;
		break;
	case 7:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_128X;
		break;
	case 8:
		nrf_oversampling = NRF_SAADC_OVERSAMPLE_256X;
		break;
	default:
		LOG_ERR("Oversampling value %d is not valid",
			    sequence->oversampling);
		return -EINVAL;
	}

	nrf_saadc_oversample_set(NRF_SAADC, nrf_oversampling);
	return 0;
}

static int check_buffer_size(const struct adc_sequence *sequence,
			     uint8_t active_channels)
{
	size_t needed_buffer_size;

	needed_buffer_size = samples_to_bytes(sequence, active_channels);

	if (sequence->options) {
		needed_buffer_size *= (1 + sequence->options->extra_samplings);
	}

	if (sequence->buffer_size < needed_buffer_size) {
		LOG_ERR("Provided buffer is too small (%u/%u)",
			    sequence->buffer_size, needed_buffer_size);
		return -ENOMEM;
	}

	return 0;
}

static bool has_single_ended(const struct adc_sequence *sequence)
{
	return sequence->channels & m_data.single_ended_channels;
}

static void correct_single_ended(const struct adc_sequence *sequence)
{
	uint16_t channel_bit = BIT(0);
	uint8_t selected_channels = sequence->channels;
	uint8_t single_ended_channels = m_data.single_ended_channels;
	int16_t *sample = nrf_saadc_buffer_pointer_get(NRF_SAADC);

	while (channel_bit <= single_ended_channels) {
		if (channel_bit & selected_channels) {
			if ((channel_bit & single_ended_channels) && (*sample < 0)) {
				*sample = 0;
			}

			sample++;
		}

		channel_bit <<= 1;
	}
}

static int start_read(const struct device *dev,
		      const struct adc_sequence *sequence)
{
	int error;
	uint32_t selected_channels = sequence->channels;
	uint8_t resolution = sequence->resolution;
	uint8_t active_channels;
	uint8_t channel_id;

	/* Signal an error if channel selection is invalid (no channels or
	 * a non-existing one is selected).
	 */
	if (!selected_channels ||
	    (selected_channels & ~BIT_MASK(SAADC_CH_NUM))) {
		LOG_ERR("Invalid selection of channels");
		return -EINVAL;
	}

	active_channels = 0U;

	/* Enable only the channels selected for the pointed sequence.
	 * Disable all the rest.
	 */
	channel_id = 0U;
	do {
		if (selected_channels & BIT(channel_id)) {
			/* Signal an error if a selected channel has not been
			 * configured yet.
			 */
			if (m_data.positive_inputs[channel_id] == 0U) {
				LOG_ERR("Channel %u not configured",
					    channel_id);
				return -EINVAL;
			}
			/* Signal an error if the channel is configured as
			 * single ended with a resolution which is identical
			 * to the sample bit size. The SAADC's "single ended"
			 * mode is really differential mode with the
			 * negative input tied to ground. We can therefore
			 * observe negative values if the positive input falls
			 * below ground. If the sample bitsize is larger than
			 * the resolution, we can detect negative values and
			 * correct them to 0 after the sequencen has ended.
			 */
			if ((m_data.single_ended_channels & BIT(channel_id)) &&
			    (NRF_SAADC_8BIT_SAMPLE_WIDTH == 8 && resolution == 8)) {
				LOG_ERR("Channel %u invalid single ended resolution",
					channel_id);
				return -EINVAL;
			}
			/* When oversampling is used, the burst mode needs to
			 * be activated. Unfortunately, this mode cannot be
			 * activated permanently in the channel setup, because
			 * then the multiple channel sampling fails (the END
			 * event is not generated) after switching to a single
			 * channel sampling and back. Thus, when oversampling
			 * is not used (hence, the multiple channel sampling is
			 * possible), the burst mode have to be deactivated.
			 */
			nrf_saadc_burst_set(NRF_SAADC, channel_id,
				(sequence->oversampling != 0U ?
					NRF_SAADC_BURST_ENABLED :
					NRF_SAADC_BURST_DISABLED));
			nrf_saadc_channel_pos_input_set(
				NRF_SAADC,
				channel_id,
#if NRF_SAADC_HAS_AIN_AS_PIN
				saadc_psels[m_data.positive_inputs[channel_id]]
#else
				m_data.positive_inputs[channel_id]
#endif
				);
			++active_channels;
		} else {
			nrf_saadc_burst_set(
				NRF_SAADC,
				channel_id,
				NRF_SAADC_BURST_DISABLED);
			nrf_saadc_channel_pos_input_set(
				NRF_SAADC,
				channel_id,
				NRF_SAADC_INPUT_DISABLED);
		}
	} while (++channel_id < SAADC_CH_NUM);

	error = set_resolution(sequence);
	if (error) {
		return error;
	}

	error = set_oversampling(sequence, active_channels);
	if (error) {
		return error;
	}

	error = check_buffer_size(sequence, active_channels);
	if (error) {
		return error;
	}

#if defined(ADC_BUFFER_IN_RAM)
	m_data.user_buffer = sequence->buffer;
	m_data.active_channels = active_channels;

	nrf_saadc_buffer_init(NRF_SAADC,
			      (nrf_saadc_value_t *)m_data.samples_buffer,
			      active_channels);
#else
	nrf_saadc_buffer_init(NRF_SAADC,
			      (nrf_saadc_value_t *)sequence->buffer,
			      active_channels);
#endif

	adc_context_start_read(&m_data.ctx, sequence);

	return adc_context_wait_for_completion(&m_data.ctx);
}

/* Implementation of the ADC driver API function: adc_read. */
static int adc_nrfx_read(const struct device *dev,
			 const struct adc_sequence *sequence)
{
	int error;

	adc_context_lock(&m_data.ctx, false, NULL);
	error = start_read(dev, sequence);
	adc_context_release(&m_data.ctx, error);

	return error;
}

#ifdef CONFIG_ADC_ASYNC
/* Implementation of the ADC driver API function: adc_read_async. */
static int adc_nrfx_read_async(const struct device *dev,
			       const struct adc_sequence *sequence,
			       struct k_poll_signal *async)
{
	int error;

	adc_context_lock(&m_data.ctx, true, async);
	error = start_read(dev, sequence);
	adc_context_release(&m_data.ctx, error);

	return error;
}
#endif /* CONFIG_ADC_ASYNC */

static void saadc_irq_handler(const struct device *dev)
{
	if (nrf_saadc_event_check(NRF_SAADC, NRF_SAADC_EVENT_END)) {
		nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_END);

		nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_STOP);
		nrf_saadc_disable(NRF_SAADC);

		if (has_single_ended(&m_data.ctx.sequence)) {
			correct_single_ended(&m_data.ctx.sequence);
		}

#if defined(ADC_BUFFER_IN_RAM)
		memcpy(m_data.user_buffer, m_data.samples_buffer,
			samples_to_bytes(&m_data.ctx.sequence, m_data.active_channels));
#endif

		adc_context_on_sampling_done(&m_data.ctx, dev);
	} else if (nrf_saadc_event_check(NRF_SAADC,
					 NRF_SAADC_EVENT_CALIBRATEDONE)) {
		nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_CALIBRATEDONE);

		/*
		 * The workaround for Nordic nRF52832 anomalies 86 and
		 * 178 is an explicit STOP after CALIBRATEOFFSET
		 * before issuing START.
		 */
		nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_STOP);
		nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_START);
		nrf_saadc_task_trigger(NRF_SAADC, NRF_SAADC_TASK_SAMPLE);
	}
}

static int init_saadc(const struct device *dev)
{
	nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_END);
	nrf_saadc_event_clear(NRF_SAADC, NRF_SAADC_EVENT_CALIBRATEDONE);
	nrf_saadc_int_enable(NRF_SAADC,
			     NRF_SAADC_INT_END | NRF_SAADC_INT_CALIBRATEDONE);
	NRFX_IRQ_ENABLE(DT_INST_IRQN(0));

	IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
		    saadc_irq_handler, DEVICE_DT_INST_GET(0), 0);

	adc_context_unlock_unconditionally(&m_data.ctx);

	return 0;
}

static const struct adc_driver_api adc_nrfx_driver_api = {
	.channel_setup = adc_nrfx_channel_setup,
	.read          = adc_nrfx_read,
#ifdef CONFIG_ADC_ASYNC
	.read_async    = adc_nrfx_read_async,
#endif
#if defined(CONFIG_SOC_NRF54L15)
	.ref_internal  = 900,
#elif defined(CONFIG_NRF_PLATFORM_HALTIUM)
	.ref_internal  = 1024,
#else
	.ref_internal  = 600,
#endif
};

/*
 * There is only one instance on supported SoCs, so inst is guaranteed
 * to be 0 if any instance is okay. (We use adc_0 above, so the driver
 * is relying on the numeric instance value in a way that happens to
 * be safe.)
 *
 * Just in case that assumption becomes invalid in the future, we use
 * a BUILD_ASSERT().
 */
#define SAADC_INIT(inst)						\
	BUILD_ASSERT((inst) == 0,					\
		     "multiple instances not supported");		\
	DEVICE_DT_INST_DEFINE(0,					\
			    init_saadc,					\
			    NULL,					\
			    NULL,					\
			    NULL,					\
			    POST_KERNEL,				\
			    CONFIG_ADC_INIT_PRIORITY,			\
			    &adc_nrfx_driver_api);

DT_INST_FOREACH_STATUS_OKAY(SAADC_INIT)