| .. zephyr:code-sample:: bluetooth_broadcaster_multiple |
| :name: Multiple Broadcaster |
| :relevant-api: bluetooth |
| |
| Advertise multiple advertising sets. |
| |
| Overview |
| ******** |
| |
| A simple application demonstrating the Bluetooth Low Energy Broadcaster that |
| uses multiple advertising sets functionality. |
| |
| This sample advertises two non-connectable non-scannable advertising sets with |
| two different SID. Number of advertising sets can be increased by updating the |
| :kconfig:option:`CONFIG_BT_EXT_ADV_MAX_ADV_SET` value in the project configuration file. |
| |
| When building this sample combined with a Bluetooth LE Controller, the |
| advertising data length can be increased from the default 31 bytes by updating |
| the Controller's :kconfig:option:`CONFIG_BT_CTLR_ADV_DATA_LEN_MAX` value. The size of the |
| manufacturer data is calculated to maximize the use of supported AD data length. |
| |
| Requirements |
| ************ |
| |
| * A board with Bluetooth Low Energy with Extended Advertising support. |
| |
| Building and Running |
| ******************** |
| |
| This sample can be found under |
| :zephyr_file:`samples/bluetooth/broadcaster_multiple` in the Zephyr tree. |
| |
| To test this sample use the Observer sample with Extended Scanning enabled, |
| found under |
| :zephyr_file:`samples/bluetooth/observer` in the Zephyr tree. |
| |
| See :zephyr:code-sample-category:`Bluetooth samples section <bluetooth>` for details. |
