| # Copyright (c) 2020 Linumiz |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig HAWKBIT |
| bool "Eclipse hawkBit Firmware Over-the-Air support" |
| depends on SETTINGS |
| depends on FLASH |
| depends on REBOOT |
| depends on HWINFO |
| depends on NET_TCP |
| depends on NET_SOCKETS |
| depends on IMG_MANAGER |
| depends on NETWORKING |
| depends on HTTP_CLIENT |
| depends on DNS_RESOLVER |
| depends on JSON_LIBRARY |
| depends on BOOTLOADER_MCUBOOT |
| select MPU_ALLOW_FLASH_WRITE |
| select IMG_ENABLE_IMAGE_CHECK |
| select IMG_ERASE_PROGRESSIVELY |
| help |
| hawkBit is a domain independent back-end framework for polling out |
| software updates to constrained edge devices as well as more powerful |
| controllers and gateways connected to IP based networking infrastructure. |
| |
| if HAWKBIT |
| config HAWKBIT_POLL_INTERVAL |
| int "Time to poll interval (in minutes)" |
| default 5 |
| range 1 43200 |
| help |
| Set the interval that the hawkbit update server will be polled. |
| This time interval is zero and 43200 minutes(30 days). This will be overridden |
| by the value configured in the settings of the hawkBit server. |
| |
| config HAWKBIT_AUTOHANDLER |
| bool "hawkBit autohandler" |
| select EVENTS |
| default y |
| help |
| Activate autohandler to handle the update process automatically. |
| |
| config HAWKBIT_SHELL |
| bool "hawkBit shell utilities" |
| depends on SHELL |
| depends on HAWKBIT_AUTOHANDLER |
| help |
| Activate shell module that provides hawkBit commands. |
| |
| config HAWKBIT_SERVER |
| string "User address for the hawkbit server" |
| help |
| Configure the hawkbit server address. |
| |
| config HAWKBIT_PORT |
| int "Port number for the hawkbit server" |
| default 8080 |
| help |
| Configure the hawkbit port number. |
| |
| config HAWKBIT_SET_SETTINGS_RUNTIME |
| bool "Set hawkbit settings at runtime" |
| help |
| Enable to set hawkbit settings at runtime. |
| |
| choice HAWKBIT_DDI_SECURITY |
| prompt "hawkBit DDI API authentication modes" |
| default HAWKBIT_DDI_NO_SECURITY |
| |
| config HAWKBIT_DDI_NO_SECURITY |
| bool "No authentication security" |
| help |
| No authentication security for the hawkBit DDI API. |
| |
| config HAWKBIT_DDI_TARGET_SECURITY |
| bool "Use target security token authentication" |
| help |
| Use target security token authentication for the hawkBit DDI API. |
| |
| config HAWKBIT_DDI_GATEWAY_SECURITY |
| bool "Use gateway security token authentication" |
| help |
| Use gateway security token authentication for the hawkBit DDI API. |
| |
| endchoice |
| |
| config HAWKBIT_DDI_SECURITY_TOKEN |
| string "Authentication security token" |
| depends on HAWKBIT_DDI_TARGET_SECURITY || HAWKBIT_DDI_GATEWAY_SECURITY |
| default "" |
| help |
| Authentication security token for the configured hawkBit DDI |
| authentication mode. |
| |
| config HAWKBIT_CUSTOM_ATTRIBUTES |
| bool "Custom device attributes" |
| help |
| Use custom definition of device attributes. |
| |
| config HAWKBIT_STATUS_BUFFER_SIZE |
| int "hawkBit status buffer size" |
| default 200 |
| help |
| Set the size of the buffer, which is used to store the |
| json strings, that are sent to the hawkBit server. It might |
| be increased if the custom attributes are used extensively. |
| |
| config HAWKBIT_CUSTOM_DEVICE_ID |
| bool "Custom device id through callback function" |
| help |
| Be able to customize the device id during runtime to a custom value, |
| by configuring the callback function. See `hawkbit_set_device_identity_cb` |
| |
| config HAWKBIT_DEVICE_ID_MAX_LENGTH |
| int "Maximum length of the device id" |
| depends on HAWKBIT_CUSTOM_DEVICE_ID |
| range 1 128 |
| default 32 |
| help |
| Maximum length of the device id. |
| |
| config HAWKBIT_USE_TLS |
| bool "Use TLS for hawkBit server connection" |
| depends on NET_SOCKETS_SOCKOPT_TLS |
| help |
| Use TLS for hawkBit connection. |
| |
| if HAWKBIT_USE_TLS |
| |
| choice HAWKBIT_CERT_TAG |
| prompt "hawkBit certificate tag" |
| default HAWKBIT_USE_STATIC_CERT_TAG |
| |
| config HAWKBIT_USE_STATIC_CERT_TAG |
| bool "Use static certificate tag" |
| help |
| Use static certificate tag for TLS connection to the hawkBit server. |
| |
| config HAWKBIT_USE_DYNAMIC_CERT_TAG |
| bool "Use dynamic certificate tag" |
| depends on HAWKBIT_SET_SETTINGS_RUNTIME |
| help |
| Use dynamic certificate tag for TLS connection to the hawkBit server. |
| |
| endchoice |
| |
| config HAWKBIT_STATIC_CERT_TAG |
| int "Static certificate tag" |
| depends on HAWKBIT_USE_STATIC_CERT_TAG |
| default 1 |
| help |
| Static certificate tag for TLS connection to the hawkBit server. |
| |
| endif |
| |
| choice HAWKBIT_REBOOT_MODE |
| prompt "Reboot mode after update" |
| default HAWKBIT_REBOOT_WARM |
| |
| config HAWKBIT_REBOOT_WARM |
| bool "Warm reboot after update" |
| help |
| Do a warm reboot after the update. |
| |
| config HAWKBIT_REBOOT_COLD |
| bool "Cold reboot after update" |
| help |
| Do a cold reboot after the update. |
| |
| endchoice |
| |
| config HEAP_MEM_POOL_ADD_SIZE_HAWKBIT |
| int "Heap memory pool size for hawkBit" |
| default 4096 |
| help |
| Set the size of the heap memory pool for hawkBit. |
| |
| module = HAWKBIT |
| module-str = Log Level for hawkbit |
| module-help = Enables logging for hawkBit code. |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| endif |
