| /** @file |
| * @brief GATT Device Information Service |
| */ |
| |
| /* |
| * Copyright (c) 2019 Demant |
| * Copyright (c) 2018 Nordic Semiconductor ASA |
| * Copyright (c) 2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/types.h> |
| #include <stddef.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <zephyr/zephyr.h> |
| #include <zephyr/init.h> |
| |
| #include <zephyr/settings/settings.h> |
| |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/bluetooth/conn.h> |
| #include <zephyr/bluetooth/uuid.h> |
| #include <zephyr/bluetooth/gatt.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_DEBUG_SERVICE) |
| #define LOG_MODULE_NAME bt_dis |
| #include "common/log.h" |
| |
| #if CONFIG_BT_DIS_PNP |
| struct dis_pnp { |
| uint8_t pnp_vid_src; |
| uint16_t pnp_vid; |
| uint16_t pnp_pid; |
| uint16_t pnp_ver; |
| } __packed; |
| |
| static struct dis_pnp dis_pnp_id = { |
| .pnp_vid_src = CONFIG_BT_DIS_PNP_VID_SRC, |
| .pnp_vid = CONFIG_BT_DIS_PNP_VID, |
| .pnp_pid = CONFIG_BT_DIS_PNP_PID, |
| .pnp_ver = CONFIG_BT_DIS_PNP_VER, |
| }; |
| #endif |
| |
| #if defined(CONFIG_BT_DIS_SETTINGS) |
| static uint8_t dis_model[CONFIG_BT_DIS_STR_MAX] = CONFIG_BT_DIS_MODEL; |
| static uint8_t dis_manuf[CONFIG_BT_DIS_STR_MAX] = CONFIG_BT_DIS_MANUF; |
| #if defined(CONFIG_BT_DIS_SERIAL_NUMBER) |
| static uint8_t dis_serial_number[CONFIG_BT_DIS_STR_MAX] = |
| CONFIG_BT_DIS_SERIAL_NUMBER_STR; |
| #endif |
| #if defined(CONFIG_BT_DIS_FW_REV) |
| static uint8_t dis_fw_rev[CONFIG_BT_DIS_STR_MAX] = |
| CONFIG_BT_DIS_FW_REV_STR; |
| #endif |
| #if defined(CONFIG_BT_DIS_HW_REV) |
| static uint8_t dis_hw_rev[CONFIG_BT_DIS_STR_MAX] = |
| CONFIG_BT_DIS_HW_REV_STR; |
| #endif |
| #if defined(CONFIG_BT_DIS_SW_REV) |
| static uint8_t dis_sw_rev[CONFIG_BT_DIS_STR_MAX] = |
| CONFIG_BT_DIS_SW_REV_STR; |
| #endif |
| |
| #define BT_DIS_MODEL_REF dis_model |
| #define BT_DIS_MANUF_REF dis_manuf |
| #define BT_DIS_SERIAL_NUMBER_STR_REF dis_serial_number |
| #define BT_DIS_FW_REV_STR_REF dis_fw_rev |
| #define BT_DIS_HW_REV_STR_REF dis_hw_rev |
| #define BT_DIS_SW_REV_STR_REF dis_sw_rev |
| |
| #else /* CONFIG_BT_DIS_SETTINGS */ |
| |
| #define BT_DIS_MODEL_REF CONFIG_BT_DIS_MODEL |
| #define BT_DIS_MANUF_REF CONFIG_BT_DIS_MANUF |
| #define BT_DIS_SERIAL_NUMBER_STR_REF CONFIG_BT_DIS_SERIAL_NUMBER_STR |
| #define BT_DIS_FW_REV_STR_REF CONFIG_BT_DIS_FW_REV_STR |
| #define BT_DIS_HW_REV_STR_REF CONFIG_BT_DIS_HW_REV_STR |
| #define BT_DIS_SW_REV_STR_REF CONFIG_BT_DIS_SW_REV_STR |
| |
| #endif /* CONFIG_BT_DIS_SETTINGS */ |
| |
| static ssize_t read_str(struct bt_conn *conn, |
| const struct bt_gatt_attr *attr, void *buf, |
| uint16_t len, uint16_t offset) |
| { |
| return bt_gatt_attr_read(conn, attr, buf, len, offset, attr->user_data, |
| strlen(attr->user_data)); |
| } |
| |
| #if CONFIG_BT_DIS_PNP |
| static ssize_t read_pnp_id(struct bt_conn *conn, |
| const struct bt_gatt_attr *attr, void *buf, |
| uint16_t len, uint16_t offset) |
| { |
| return bt_gatt_attr_read(conn, attr, buf, len, offset, &dis_pnp_id, |
| sizeof(dis_pnp_id)); |
| } |
| #endif |
| |
| /* Device Information Service Declaration */ |
| BT_GATT_SERVICE_DEFINE(dis_svc, |
| BT_GATT_PRIMARY_SERVICE(BT_UUID_DIS), |
| |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_MODEL_NUMBER, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_str, NULL, BT_DIS_MODEL_REF), |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_MANUFACTURER_NAME, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_str, NULL, BT_DIS_MANUF_REF), |
| #if CONFIG_BT_DIS_PNP |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_PNP_ID, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_pnp_id, NULL, &dis_pnp_id), |
| #endif |
| |
| #if defined(CONFIG_BT_DIS_SERIAL_NUMBER) |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_SERIAL_NUMBER, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_str, NULL, |
| BT_DIS_SERIAL_NUMBER_STR_REF), |
| #endif |
| #if defined(CONFIG_BT_DIS_FW_REV) |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_FIRMWARE_REVISION, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_str, NULL, BT_DIS_FW_REV_STR_REF), |
| #endif |
| #if defined(CONFIG_BT_DIS_HW_REV) |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_HARDWARE_REVISION, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_str, NULL, BT_DIS_HW_REV_STR_REF), |
| #endif |
| #if defined(CONFIG_BT_DIS_SW_REV) |
| BT_GATT_CHARACTERISTIC(BT_UUID_DIS_SOFTWARE_REVISION, |
| BT_GATT_CHRC_READ, BT_GATT_PERM_READ, |
| read_str, NULL, BT_DIS_SW_REV_STR_REF), |
| #endif |
| |
| ); |
| |
| #if defined(CONFIG_BT_DIS_SETTINGS) |
| static int dis_set(const char *name, size_t len_rd, |
| settings_read_cb read_cb, void *store) |
| { |
| ssize_t len; |
| int nlen; |
| const char *next; |
| |
| nlen = settings_name_next(name, &next); |
| if (!strncmp(name, "manuf", nlen)) { |
| len = read_cb(store, &dis_manuf, sizeof(dis_manuf) - 1); |
| if (len < 0) { |
| BT_ERR("Failed to read manufacturer from storage" |
| " (err %zd)", len); |
| } else { |
| dis_manuf[len] = '\0'; |
| |
| BT_DBG("Manufacturer set to %s", dis_manuf); |
| } |
| return 0; |
| } |
| if (!strncmp(name, "model", nlen)) { |
| len = read_cb(store, &dis_model, sizeof(dis_model) - 1); |
| if (len < 0) { |
| BT_ERR("Failed to read model from storage" |
| " (err %zd)", len); |
| } else { |
| dis_model[len] = '\0'; |
| |
| BT_DBG("Model set to %s", dis_model); |
| } |
| return 0; |
| } |
| #if defined(CONFIG_BT_DIS_SERIAL_NUMBER) |
| if (!strncmp(name, "serial", nlen)) { |
| len = read_cb(store, &dis_serial_number, |
| sizeof(dis_serial_number) - 1); |
| if (len < 0) { |
| BT_ERR("Failed to read serial number from storage" |
| " (err %zd)", len); |
| } else { |
| dis_serial_number[len] = '\0'; |
| |
| BT_DBG("Serial number set to %s", dis_serial_number); |
| } |
| return 0; |
| } |
| #endif |
| #if defined(CONFIG_BT_DIS_FW_REV) |
| if (!strncmp(name, "fw", nlen)) { |
| len = read_cb(store, &dis_fw_rev, sizeof(dis_fw_rev) - 1); |
| if (len < 0) { |
| BT_ERR("Failed to read firmware revision from storage" |
| " (err %zd)", len); |
| } else { |
| dis_fw_rev[len] = '\0'; |
| |
| BT_DBG("Firmware revision set to %s", dis_fw_rev); |
| } |
| return 0; |
| } |
| #endif |
| #if defined(CONFIG_BT_DIS_HW_REV) |
| if (!strncmp(name, "hw", nlen)) { |
| len = read_cb(store, &dis_hw_rev, sizeof(dis_hw_rev) - 1); |
| if (len < 0) { |
| BT_ERR("Failed to read hardware revision from storage" |
| " (err %zd)", len); |
| } else { |
| dis_hw_rev[len] = '\0'; |
| |
| BT_DBG("Hardware revision set to %s", dis_hw_rev); |
| } |
| return 0; |
| } |
| #endif |
| #if defined(CONFIG_BT_DIS_SW_REV) |
| if (!strncmp(name, "sw", nlen)) { |
| len = read_cb(store, &dis_sw_rev, sizeof(dis_sw_rev) - 1); |
| if (len < 0) { |
| BT_ERR("Failed to read software revision from storage" |
| " (err %zd)", len); |
| } else { |
| dis_sw_rev[len] = '\0'; |
| |
| BT_DBG("Software revision set to %s", dis_sw_rev); |
| } |
| return 0; |
| } |
| #endif |
| return 0; |
| } |
| |
| SETTINGS_STATIC_HANDLER_DEFINE(bt_dis, "bt/dis", NULL, dis_set, NULL, NULL); |
| |
| #endif /* CONFIG_BT_DIS_SETTINGS*/ |