blob: fdc86f792ecb039d630f5543860fd1d0bac05dfe [file] [log] [blame]
/*
* PAN1782 EVB configuration
*
* Copyright (c) 2022 Panasonic Industrial Devices Europe GmbH
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52833_qiaa.dtsi>
#include "pan1782_evb-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>
/ {
model = "pan1782-evb";
compatible = "panasonic-industrial-devices-europe-gmbh,pan1782-evb";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
zephyr,ieee802154 = &ieee802154;
};
leds {
compatible = "gpio-leds";
evb_led1: evb_led_1 {
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
label = "LED1 on EVB";
};
evb_led2: evb_led_2 {
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
label = "LED2 on EVB";
};
};
pwmleds {
compatible = "pwm-leds";
pwm_evb_led1: pwm_evb_led_1 {
pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
};
};
buttons {
compatible = "gpio-keys";
evb_sw1: evb_sw1 {
gpios = <&gpio0 4 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "SW1 on EVB";
zephyr,code = <INPUT_KEY_0>;
};
evb_sw2: evb_sw2 {
gpios = <&gpio0 5 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "SW2 on EVB";
zephyr,code = <INPUT_KEY_1>;
};
};
arduino_header: connector {
compatible = "panasonic,reduced-arduino-header";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &gpio0 31 0>, /* A0 */
<1 0 &gpio0 30 0>, /* A1 */
<2 0 &gpio0 4 0>, /* A2 */
<3 0 &gpio0 5 0>, /* A3 */
<6 0 &gpio1 9 0>, /* D0 */
<7 0 &gpio1 3 0>, /* D1 */
<8 0 &gpio1 15 0>, /* D2 */
<9 0 &gpio1 17 0>, /* D3 */
<10 0 &gpio1 4 0>, /* D4 */
<11 0 &gpio1 5 0>, /* D5 */
<16 0 &gpio0 30 0>, /* D10 */
<17 0 &gpio0 20 0>, /* D11 */
<18 0 &gpio0 2 0>, /* D12 */
<19 0 &gpio0 29 0>, /* D13 */
<20 0 &gpio0 11 0>, /* D14 */
<21 0 &gpio0 28 0>; /* D15 */
};
/* These aliases are provided for compatibility with samples */
aliases {
led0 = &evb_led1;
led1 = &evb_led2;
pwm-led0 = &pwm_evb_led1;
sw0 = &evb_sw1;
sw1 = &evb_sw2;
bootloader-led0 = &evb_led1;
watchdog0 = &wdt0;
};
};
&adc {
status = "okay";
};
&uicr {
gpio-as-nreset;
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
arduino_serial: &uart0 {
compatible = "nordic,nrf-uarte";
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
arduino_i2c: &i2c0 {
compatible = "nordic,nrf-twi";
status = "okay";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
};
&i2c1 {
compatible = "nordic,nrf-twi";
/* Cannot be used together with spi1, so disabled by default. */
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
pinctrl-names = "default", "sleep";
};
&pwm0 {
status = "okay";
pinctrl-0 = <&pwm0_default>;
pinctrl-1 = <&pwm0_sleep>;
pinctrl-names = "default", "sleep";
};
&spi0 {
compatible = "nordic,nrf-spi";
/* Cannot be used together with i2c0, so disabled by default. */
pinctrl-0 = <&spi0_default>;
pinctrl-1 = <&spi0_sleep>;
pinctrl-names = "default", "sleep";
};
&spi1 {
compatible = "nordic,nrf-spi";
status = "okay";
pinctrl-0 = <&spi1_default>;
pinctrl-1 = <&spi1_sleep>;
pinctrl-names = "default", "sleep";
};
arduino_spi: &spi3 {
status = "okay";
cs-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; /* D10 */
pinctrl-0 = <&spi3_default>;
pinctrl-1 = <&spi3_sleep>;
pinctrl-names = "default", "sleep";
};
&ieee802154 {
status = "okay";
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x000000000 0xC000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x32000>;
};
slot1_partition: partition@3e000 {
label = "image-1";
reg = <0x0003E000 0x32000>;
};
scratch_partition: partition@70000 {
label = "image-scratch";
reg = <0x00070000 0xA000>;
};
storage_partition: partition@7a000 {
label = "storage";
reg = <0x0007A000 0x00006000>;
};
};
};
zephyr_udc0: &usbd {
compatible = "nordic,nrf-usbd";
status = "okay";
};