| /* |
| * Copyright (c) 2020 STMicroelectronics |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include "nucleo_l552ze_q-common.dtsi" |
| |
| / { |
| model = "STMicroelectronics STM32L552ZE-NUCLEO-Q board"; |
| compatible = "st,stm32l552ze-nucleo-q"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| chosen { |
| zephyr,console = &lpuart1; |
| zephyr,shell-uart = &lpuart1; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_ns_partition; |
| }; |
| |
| aliases { |
| led0 = &blue_led_1; |
| sw0 = &user_button; |
| }; |
| }; |
| |
| &flash0 { |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* |
| * Following flash partition is compatible with requirements |
| * given in TFM configuration given for current board: |
| * multiple image boot, no tests. |
| * It might require adjustment depending on evolutions on TFM. |
| */ |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 DT_SIZE_K(80)>; |
| read-only; |
| }; |
| /* Secure image primary slot */ |
| slot0_partition: partition@14000 { |
| label = "image-0"; |
| reg = <0x00014000 DT_SIZE_K(180)>; |
| }; |
| /* Non-secure image primary slot */ |
| slot0_ns_partition: partition@41000 { |
| label = "image-0-nonsecure"; |
| reg = <0x00041000 DT_SIZE_K(36)>; |
| }; |
| /* Secure image secondary slot */ |
| slot1_partition: partition@4a000 { |
| label = "image-1"; |
| reg = <0x0004a000 DT_SIZE_K(180)>; |
| }; |
| /* Non-secure image secondary slot */ |
| slot1_ns_partition: partition@77000 { |
| label = "image-1-nonsecure"; |
| reg = <0x00077000 DT_SIZE_K(36)>; |
| }; |
| /* Applicative Non Volatile Storage */ |
| /* Not available in this config, use secure storage */ |
| }; |
| }; |