boards/st/stm32h7b3i_dk/doc/index.rst - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 .. _stm32h7b3i_dk_board:

 ST STM32H7B3I Discovery kit
 ###########################

 Overview
 ********

 The STM32H7B3I-DK Discovery kit is a complete demonstration and development
 platform for STMicroelectronics Arm® Cortex®-M7 core-based STM32H7B3LIH6QU
 microcontroller.

 The STM32H7B3I-DK Discovery kit is used as a reference design for user
 application development before porting to the final product, thus simplifying
 the application development.

 The full range of hardware features available on the board helps users enhance
 their application development by an evaluation of almost all peripherals (such as
 USB OTG_HS, microSD, USART, FDCAN, audio DAC stereo with audio jack input and output,
 camera, SDRAM, Octo-SPI Flash memory and RGB interface LCD with capacitive touch
 panel). ARDUINO® Uno V3 connectors provide easy connection to extension shields or
 daughterboards for specific applications.

 Important board features include:

 - STM32H7B3LIH6Q microcontroller featuring 2 Mbytes of Flash memory and 1.4 Mbyte of RAM in BGA225 package
 - 4.3" (480x272 pixels) TFT color LCD module including a capacitive touch panel with RGB interface
 - Wi-Fi |reg| module compliant with 802.11 b/g/n
 - USB OTG HS
 - Audio codec
 - 512-Mbit Octo-SPI NOR Flash memory
 - 128-Mbit SDRAM
 - 2 user LEDs
 - User and Reset push-buttons
 - Fanout daughterboard
 - 1x FDCAN
 - Board connectors:
    - Camera (8 bit)
    - USB with Micro-AB
    - Stereo headset jack including analog microphone input
    - Audio jack for external speakers
    - microSD |trade| card
    - TAG-Connect 10-pin footprint
    - Arm |reg| Cortex |reg| 10-pin 1.27mm-pitch debug connector over STDC14 footprint
    - ARDUINO |reg| Uno V3 expansion connector
    - STMod+ expansion connector
    - Audio daughterboard expansion connector
    - External I2C expansion connector
 - Flexible power-supply options:
    - ST-LINK USB VBUS, USB OTG HS connector, or external sources
 - On-board STLINK-V3E debugger/programmer with USB re-enumeration capability

 .. image:: img/stm32h7b3i_dk.jpg
      :align: center
      :alt: STM32H7B3I-DK

 More information about the board can be found at the `STM32H7B3I-DK website`_.

 Hardware
 ********

 The STM32H7B3I Discovery kit provides the following hardware components:

 - STM32H7B3LIH6Q in BGA225 package
 - ARM |reg| 32-bit Cortex |reg| -M7 CPU with FPU
 - 280 MHz max CPU frequency
 - VDD from 1.62 V to 3.6 V
 - 2 MB Flash
 - ~1.4 Mbytes SRAM
 - 32-bit timers(2)
 - 16-bit timers(15)
 - SPI(6)
 - I2C(4)
 - I2S (4)
 - USART(5)
 - UART(5)
 - USB OTG Full Speed and High Speed(1)
 - CAN FD(2)
 - 2xSAI (serial audio interface)
 - SPDIFRX interface(1)
 - HDMI-CEC(1)
 - Octo-SPI memory interfaces with on-the-fly decryption(2)
 - 8- to 14-bit camera interface (1)
 - 8-/16-bit parallel synchronous data input/output slave interface (PSSI)
 - GPIO (up to 168) with external interrupt capability
 - 16-bit ADC(2) with 24 channels / 3.6 MSPS
 - 1x12-bit single-channel DAC + 1x12-bit dual-channel DAC
 - True Random Number Generator (RNG)
 - 5 DMA controllers
 - LCD-TFT Controller with XGA resolution
 - Chrom-ART graphical hardware Accelerator (DMA2D)
 - Hardware JPEG Codec
 - Chrom-GRC™ (GFXMMU)

 More information about STM32H7B3 can be found here:

 - `STM32H7A3/7B3 on www.st.com`_
 - `STM32H7A3/7B3/7B0 reference manual`_
 - `STM32H7B3xI datasheet`_

 Supported Features
 ==================

 The current Zephyr stm32h7b3i_dk board configuration supports the following hardware features:

 +-----------+------------+-------------------------------------+
 | Interface | Controller | Driver/Component                    |
 +===========+============+=====================================+
 | NVIC      | on-chip    | nested vector interrupt controller  |
 +-----------+------------+-------------------------------------+
 | UART      | on-chip    | serial port-polling;                |
 |           |            | serial port-interrupt               |
 +-----------+------------+-------------------------------------+
 | PINMUX    | on-chip    | pinmux                              |
 +-----------+------------+-------------------------------------+
 | GPIO      | on-chip    | gpio                                |
 +-----------+------------+-------------------------------------+
 | I2C       | on-chip    | i2c                                 |
 +-----------+------------+-------------------------------------+
 | SDMMC     | on-chip    | disk access                         |
 +-----------+------------+-------------------------------------+
 | SPI       | on-chip    | spi                                 |
 +-----------+------------+-------------------------------------+
 | OSPI NOR  | on-chip    | off-chip flash                      |
 +-----------+------------+-------------------------------------+
 | FLASH     | on-chip    | flash memory                        |
 +-----------+------------+-------------------------------------+
 | FMC       | on-chip    | memc (SDRAM)                        |
 +-----------+------------+-------------------------------------+
 | LTDC      | on-chip    | display                             |
 +-----------+------------+-------------------------------------+
 | CANFD     | on-chip    | can                                 |
 +-----------+------------+-------------------------------------+


 Other hardware features have not been enabled yet for this board.

 The default configuration can be found in the defconfig file:
 :zephyr_file:`boards/st/stm32h7b3i_dk/stm32h7b3i_dk_defconfig`

 Pin Mapping
 ===========

 STM32H7B3I Discovery kit has 11 GPIO controllers. These controllers are responsible for pin muxing,
 input/output, pull-up, etc.

 For more details please refer to `STM32H7B3I-DK board User Manual`_.

 Default Zephyr Peripheral Mapping:
 ----------------------------------

 The STM32H7B3I Discovery kit features an Arduino Uno V3 connector. Board is
 configured as follows

 - UART_1 TX/RX : PA9/PA10 (ST-Link Virtual Port Com)
 - UART_4 TX/RX : PH13/PH14 (Arduino Serial)
 - I2C4 SCL/SDA : PD12/PD13 (Arduino I2C, Touchscreen FT5336 with PH2 Interrupt Pin)
 - SPI2 SCK/MISO/MOSI/NSS : PA12/PB14/PB15/PI0 (Arduino SPI)
 - LD1 : PG11
 - LD2 : PG2
 - USER_PB : PC13
 - SDMMC D0/D1/D2/D3/CK/CMD/CD : PC8/PC9/PC10/PC11/PC12/PD2/PI8
 - CANFD RX/TX/WAKE [#]_ : PA11/PA12/PH8
 - FMC SDRAM :

     - D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10
     - A0-A11 : PF0/PF1/PF2/PF3/PF4/PF5/PF12/PF13/PF14/PF15/PG0/PG1
     - A14/A15 : PG4/PG5
     - SDNRAS/SDNCAS : PF11/PG15
     - NBL0/NBL1 : PE0/PE1
     - SDCLK/SDNWE/SDCKE1/SDNE1 : PG8/PH5/PH7/PH6

 - LTDC :

     - R0-R7 : PI15/PJ0/PJ1/PJ2/PJ3/PJ4/PJ5/PJ6
     - G0-G7 : PJ7/PJ8/PJ9/PJ10/PJ11/PK0/PK1/PK2
     - B0-B7 : PJ12/PJ13/PJ14/PJ15/PK3/PK4/PK5/PK6
     - DE/CLK/HSYNC/VSYNC : PK7/PI14/PI12/PI13


 System Clock
 ============

 The STM32H7B3I System Clock can be driven by an internal or external oscillator,
 as well as by the main PLL clock. By default, the System clock is driven
 by the PLL clock at 280MHz. PLL clock is fed by a 24MHz high speed external clock.

 Serial Port
 ===========

 The STM32H7B3I Discovery kit has up to 10 UARTs. The Zephyr console output is assigned
 to UART1 which is connected to the onboard STLINK-V3E. Virtual COM port interface
 default communication settings are 115200 8N1.


 Programming and Debugging
 *************************

 Applications for the ``stm32h7b3i_dk`` board configuration can be built and
 flashed in the usual way (see :ref:`build_an_application` and
 :ref:`application_run` for more details).

 Flashing
 ========

 STM32H7B3I Discovery kit includes an STLINK-V3E embedded debug tool interface.
 This interface is supported by the openocd version included in the Zephyr SDK.

 Flashing may depend on the SoC option bytes configuration, which can be checked and
 updated using `STM32CubeProgrammer`_.

 Flashing an application to STM32H7B3I
 -------------------------------------

 First, connect the STM32H7B3I Discovery kit to your host computer using
 the USB port to prepare it for flashing. Then build and flash your application.

 Here is an example for the :ref:`hello_world` application.

 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
    :board: stm32h7b3i_dk
    :goals: build flash

 Run a serial host program to connect with your board:

 .. code-block:: console

    $ minicom -D /dev/ttyACM0

 You should see the following message on the console:

 .. code-block:: console

    Hello World! arm

 Debugging
 =========

 You can debug an application in the usual way.  Here is an example for the
 :ref:`hello_world` application.

 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
    :board: stm32h7b3i_dk
    :goals: debug


 .. _STM32H7B3I-DK website:
    https://www.st.com/en/evaluation-tools/stm32h7b3i-dk.html

 .. _STM32H7B3I-DK board User Manual:
    https://www.st.com/resource/en/user_manual/um2569-discovery-kit-with-stm32h7b3li-mcu-stmicroelectronics.pdf

 .. _STM32H7A3/7B3 on www.st.com:
    https://www.st.com/en/microcontrollers-microprocessors/stm32h7a3-7b3.html

 .. _STM32H7A3/7B3/7B0 reference manual:
    https://www.st.com/resource/en/reference_manual/rm0455-stm32h7a37b3-and-stm32h7b0-value-line-advanced-armbased-32bit-mcus-stmicroelectronics.pdf

 .. _STM32H7B3xI datasheet:
    https://www.st.com/resource/en/datasheet/stm32h7b3ai.pdf

 .. _STM32CubeProgrammer:
    https://www.st.com/en/development-tools/stm32cubeprog.html

 .. _STM32H7B3I_DK board schematics:
    https://www.st.com/resource/en/schematic_pack/mb1332-h7b3i-c02_schematic.pdf

 .. [#] To use CAN, solder bridges SB3, SB4 and SB5 need to be connected.
        Take note that CANFD pins are shared with STMOD+ connector (P1), so please check
        `STM32H7B3I_DK board schematics`_ for possible collisions if using that connector.
	.. _stm32h7b3i_dk_board:

	ST STM32H7B3I Discovery kit
	###########################

	Overview
	********

	The STM32H7B3I-DK Discovery kit is a complete demonstration and development
	platform for STMicroelectronics Arm® Cortex®-M7 core-based STM32H7B3LIH6QU
	microcontroller.

	The STM32H7B3I-DK Discovery kit is used as a reference design for user
	application development before porting to the final product, thus simplifying
	the application development.

	The full range of hardware features available on the board helps users enhance
	their application development by an evaluation of almost all peripherals (such as
	USB OTG_HS, microSD, USART, FDCAN, audio DAC stereo with audio jack input and output,
	camera, SDRAM, Octo-SPI Flash memory and RGB interface LCD with capacitive touch
	panel). ARDUINO® Uno V3 connectors provide easy connection to extension shields or
	daughterboards for specific applications.

	Important board features include:

	- STM32H7B3LIH6Q microcontroller featuring 2 Mbytes of Flash memory and 1.4 Mbyte of RAM in BGA225 package
	- 4.3" (480x272 pixels) TFT color LCD module including a capacitive touch panel with RGB interface
	- Wi-Fi \|reg\| module compliant with 802.11 b/g/n
	- USB OTG HS
	- Audio codec
	- 512-Mbit Octo-SPI NOR Flash memory
	- 128-Mbit SDRAM
	- 2 user LEDs
	- User and Reset push-buttons
	- Fanout daughterboard
	- 1x FDCAN
	- Board connectors:
	- Camera (8 bit)
	- USB with Micro-AB
	- Stereo headset jack including analog microphone input
	- Audio jack for external speakers
	- microSD \|trade\| card
	- TAG-Connect 10-pin footprint
	- Arm \|reg\| Cortex \|reg\| 10-pin 1.27mm-pitch debug connector over STDC14 footprint
	- ARDUINO \|reg\| Uno V3 expansion connector
	- STMod+ expansion connector
	- Audio daughterboard expansion connector
	- External I2C expansion connector
	- Flexible power-supply options:
	- ST-LINK USB VBUS, USB OTG HS connector, or external sources
	- On-board STLINK-V3E debugger/programmer with USB re-enumeration capability

	.. image:: img/stm32h7b3i_dk.jpg
	:align: center
	:alt: STM32H7B3I-DK

	More information about the board can be found at the `STM32H7B3I-DK website`_.

	Hardware
	********

	The STM32H7B3I Discovery kit provides the following hardware components:

	- STM32H7B3LIH6Q in BGA225 package
	- ARM \|reg\| 32-bit Cortex \|reg\| -M7 CPU with FPU
	- 280 MHz max CPU frequency
	- VDD from 1.62 V to 3.6 V
	- 2 MB Flash
	- ~1.4 Mbytes SRAM
	- 32-bit timers(2)
	- 16-bit timers(15)
	- SPI(6)
	- I2C(4)
	- I2S (4)
	- USART(5)
	- UART(5)
	- USB OTG Full Speed and High Speed(1)
	- CAN FD(2)
	- 2xSAI (serial audio interface)
	- SPDIFRX interface(1)
	- HDMI-CEC(1)
	- Octo-SPI memory interfaces with on-the-fly decryption(2)
	- 8- to 14-bit camera interface (1)
	- 8-/16-bit parallel synchronous data input/output slave interface (PSSI)
	- GPIO (up to 168) with external interrupt capability
	- 16-bit ADC(2) with 24 channels / 3.6 MSPS
	- 1x12-bit single-channel DAC + 1x12-bit dual-channel DAC
	- True Random Number Generator (RNG)
	- 5 DMA controllers
	- LCD-TFT Controller with XGA resolution
	- Chrom-ART graphical hardware Accelerator (DMA2D)
	- Hardware JPEG Codec
	- Chrom-GRC™ (GFXMMU)

	More information about STM32H7B3 can be found here:

	- `STM32H7A3/7B3 on www.st.com`_
	- `STM32H7A3/7B3/7B0 reference manual`_
	- `STM32H7B3xI datasheet`_

	Supported Features
	==================

	The current Zephyr stm32h7b3i_dk board configuration supports the following hardware features:

	+-----------+------------+-------------------------------------+
	\| Interface \| Controller \| Driver/Component \|
	+===========+============+=====================================+
	\| NVIC \| on-chip \| nested vector interrupt controller \|
	+-----------+------------+-------------------------------------+
	\| UART \| on-chip \| serial port-polling; \|
	\| \| \| serial port-interrupt \|
	+-----------+------------+-------------------------------------+
	\| PINMUX \| on-chip \| pinmux \|
	+-----------+------------+-------------------------------------+
	\| GPIO \| on-chip \| gpio \|
	+-----------+------------+-------------------------------------+
	\| I2C \| on-chip \| i2c \|
	+-----------+------------+-------------------------------------+
	\| SDMMC \| on-chip \| disk access \|
	+-----------+------------+-------------------------------------+
	\| SPI \| on-chip \| spi \|
	+-----------+------------+-------------------------------------+
	\| OSPI NOR \| on-chip \| off-chip flash \|
	+-----------+------------+-------------------------------------+
	\| FLASH \| on-chip \| flash memory \|
	+-----------+------------+-------------------------------------+
	\| FMC \| on-chip \| memc (SDRAM) \|
	+-----------+------------+-------------------------------------+
	\| LTDC \| on-chip \| display \|
	+-----------+------------+-------------------------------------+
	\| CANFD \| on-chip \| can \|
	+-----------+------------+-------------------------------------+


	Other hardware features have not been enabled yet for this board.

	The default configuration can be found in the defconfig file:
	:zephyr_file:`boards/st/stm32h7b3i_dk/stm32h7b3i_dk_defconfig`

	Pin Mapping
	===========

	STM32H7B3I Discovery kit has 11 GPIO controllers. These controllers are responsible for pin muxing,
	input/output, pull-up, etc.

	For more details please refer to `STM32H7B3I-DK board User Manual`_.

	Default Zephyr Peripheral Mapping:
	----------------------------------

	The STM32H7B3I Discovery kit features an Arduino Uno V3 connector. Board is
	configured as follows

	- UART_1 TX/RX : PA9/PA10 (ST-Link Virtual Port Com)
	- UART_4 TX/RX : PH13/PH14 (Arduino Serial)
	- I2C4 SCL/SDA : PD12/PD13 (Arduino I2C, Touchscreen FT5336 with PH2 Interrupt Pin)
	- SPI2 SCK/MISO/MOSI/NSS : PA12/PB14/PB15/PI0 (Arduino SPI)
	- LD1 : PG11
	- LD2 : PG2
	- USER_PB : PC13
	- SDMMC D0/D1/D2/D3/CK/CMD/CD : PC8/PC9/PC10/PC11/PC12/PD2/PI8
	- CANFD RX/TX/WAKE [#]_ : PA11/PA12/PH8
	- FMC SDRAM :

	- D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10
	- A0-A11 : PF0/PF1/PF2/PF3/PF4/PF5/PF12/PF13/PF14/PF15/PG0/PG1
	- A14/A15 : PG4/PG5
	- SDNRAS/SDNCAS : PF11/PG15
	- NBL0/NBL1 : PE0/PE1
	- SDCLK/SDNWE/SDCKE1/SDNE1 : PG8/PH5/PH7/PH6

	- LTDC :

	- R0-R7 : PI15/PJ0/PJ1/PJ2/PJ3/PJ4/PJ5/PJ6
	- G0-G7 : PJ7/PJ8/PJ9/PJ10/PJ11/PK0/PK1/PK2
	- B0-B7 : PJ12/PJ13/PJ14/PJ15/PK3/PK4/PK5/PK6
	- DE/CLK/HSYNC/VSYNC : PK7/PI14/PI12/PI13


	System Clock
	============

	The STM32H7B3I System Clock can be driven by an internal or external oscillator,
	as well as by the main PLL clock. By default, the System clock is driven
	by the PLL clock at 280MHz. PLL clock is fed by a 24MHz high speed external clock.

	Serial Port
	===========

	The STM32H7B3I Discovery kit has up to 10 UARTs. The Zephyr console output is assigned
	to UART1 which is connected to the onboard STLINK-V3E. Virtual COM port interface
	default communication settings are 115200 8N1.


	Programming and Debugging
	*************************

	Applications for the ``stm32h7b3i_dk`` board configuration can be built and
	flashed in the usual way (see :ref:`build_an_application` and
	:ref:`application_run` for more details).

	Flashing
	========

	STM32H7B3I Discovery kit includes an STLINK-V3E embedded debug tool interface.
	This interface is supported by the openocd version included in the Zephyr SDK.

	Flashing may depend on the SoC option bytes configuration, which can be checked and
	updated using `STM32CubeProgrammer`_.

	Flashing an application to STM32H7B3I
	-------------------------------------

	First, connect the STM32H7B3I Discovery kit to your host computer using
	the USB port to prepare it for flashing. Then build and flash your application.

	Here is an example for the :ref:`hello_world` application.

	.. zephyr-app-commands::
	:zephyr-app: samples/hello_world
	:board: stm32h7b3i_dk
	:goals: build flash

	Run a serial host program to connect with your board:

	.. code-block:: console

	$ minicom -D /dev/ttyACM0

	You should see the following message on the console:

	.. code-block:: console

	Hello World! arm

	Debugging
	=========

	You can debug an application in the usual way. Here is an example for the
	:ref:`hello_world` application.

	.. zephyr-app-commands::
	:zephyr-app: samples/hello_world
	:board: stm32h7b3i_dk
	:goals: debug


	.. _STM32H7B3I-DK website:
	https://www.st.com/en/evaluation-tools/stm32h7b3i-dk.html

	.. _STM32H7B3I-DK board User Manual:
	https://www.st.com/resource/en/user_manual/um2569-discovery-kit-with-stm32h7b3li-mcu-stmicroelectronics.pdf

	.. _STM32H7A3/7B3 on www.st.com:
	https://www.st.com/en/microcontrollers-microprocessors/stm32h7a3-7b3.html

	.. _STM32H7A3/7B3/7B0 reference manual:
	https://www.st.com/resource/en/reference_manual/rm0455-stm32h7a37b3-and-stm32h7b0-value-line-advanced-armbased-32bit-mcus-stmicroelectronics.pdf

	.. _STM32H7B3xI datasheet:
	https://www.st.com/resource/en/datasheet/stm32h7b3ai.pdf

	.. _STM32CubeProgrammer:
	https://www.st.com/en/development-tools/stm32cubeprog.html

	.. _STM32H7B3I_DK board schematics:
	https://www.st.com/resource/en/schematic_pack/mb1332-h7b3i-c02_schematic.pdf

	.. [#] To use CAN, solder bridges SB3, SB4 and SB5 need to be connected.
	Take note that CANFD pins are shared with STMOD+ connector (P1), so please check
	`STM32H7B3I_DK board schematics`_ for possible collisions if using that connector.