blob: 5d1851ef9e4c409c81deb11cf8ccd5251bfd1ed2 [file] [log] [blame]
/*
* Copyright (c) 2022 Cypress Semiconductor Corporation (an Infineon company) or
* an affiliate of Cypress Semiconductor Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @brief GPIO driver for Infineon CAT1 MCU family.
*
* Note:
* - Trigger detection on pin rising or falling edge (GPIO_INT_TRIG_BOTH)
* is not supported in current version of GPIO CAT1 driver.
*/
#define DT_DRV_COMPAT infineon_cat1_gpio
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/gpio/gpio_utils.h>
#include <cyhal_gpio.h>
#include <cyhal_hwmgr.h>
#include <cy_gpio.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(gpio_cat1, CONFIG_GPIO_LOG_LEVEL);
/* Device config structure */
struct gpio_cat1_config {
/* gpio_driver_config needs to be first */
struct gpio_driver_config common;
cyhal_gpio_callback_data_t *cb_data_ptr;
GPIO_PRT_Type *regs;
uint8_t ngpios;
uint8_t intr_priority;
};
/* Data structure */
struct gpio_cat1_data {
/* gpio_driver_data needs to be first */
struct gpio_driver_data common;
/* device's owner of this data */
const struct device *dev;
/* callbacks list */
sys_slist_t callbacks;
};
/* Get port number by calculation difference from current port address minus
* GPIO base address divided by GPIO structure size.
*/
#define GET_PORT_NUM(dev) \
(((uint32_t) ((const struct gpio_cat1_config *const) \
(dev)->config)->regs - CY_GPIO_BASE) / GPIO_PRT_SECTION_SIZE)
#define GET_DEV_OBJ_FROM_LIST(i, _) \
DEVICE_DT_GET_OR_NULL(DT_NODELABEL(gpio_prt##i))
/* Map port number to device object */
static const struct device *const port_dev_obj[IOSS_GPIO_GPIO_PORT_NR] = {
LISTIFY(15, GET_DEV_OBJ_FROM_LIST, (,))
};
static int gpio_cat1_configure(const struct device *dev,
gpio_pin_t pin, gpio_flags_t flags)
{
cy_rslt_t status;
cyhal_gpio_t gpio_pin = CYHAL_GET_GPIO(GET_PORT_NUM(dev), pin);
cyhal_gpio_drive_mode_t gpio_mode = CYHAL_GPIO_DRIVE_NONE;
cyhal_gpio_direction_t gpio_dir = CYHAL_GPIO_DIR_INPUT;
bool pin_val = false;
switch (flags & (GPIO_INPUT | GPIO_OUTPUT)) {
case GPIO_INPUT:
gpio_dir = CYHAL_GPIO_DIR_INPUT;
if ((flags & GPIO_PULL_UP) && (flags & GPIO_PULL_DOWN)) {
gpio_mode = CYHAL_GPIO_DRIVE_PULLUPDOWN;
} else if (flags & GPIO_PULL_UP) {
gpio_mode = CYHAL_GPIO_DRIVE_PULLUP;
pin_val = true;
} else if (flags & GPIO_PULL_DOWN) {
gpio_mode = CYHAL_GPIO_DRIVE_PULLDOWN;
} else {
gpio_mode = CYHAL_GPIO_DRIVE_NONE;
}
break;
case GPIO_OUTPUT:
gpio_dir = CYHAL_GPIO_DIR_OUTPUT;
if (flags & GPIO_SINGLE_ENDED) {
if (flags & GPIO_LINE_OPEN_DRAIN) {
gpio_mode = CYHAL_GPIO_DRIVE_OPENDRAINDRIVESLOW;
pin_val = true;
} else {
gpio_mode = CYHAL_GPIO_DRIVE_OPENDRAINDRIVESHIGH;
pin_val = false;
}
} else {
gpio_mode = CYHAL_GPIO_DRIVE_STRONG;
pin_val = (flags & GPIO_OUTPUT_INIT_HIGH) ? true : false;
}
break;
case GPIO_DISCONNECTED:
/* Handle this after calling cyhal_gpio_init(), otherwise it will cause an assert
* from HAL for freeing an uninitialized pin
*/
break;
default:
return -ENOTSUP;
}
status = cyhal_gpio_init(gpio_pin, gpio_dir, gpio_mode, pin_val);
/* If the gpio requested resource is already in use, try to free and
* initialize again
*/
if (status == CYHAL_HWMGR_RSLT_ERR_INUSE) {
cyhal_gpio_free(gpio_pin);
status = cyhal_gpio_init(gpio_pin, gpio_dir, gpio_mode, pin_val);
}
if (flags & GPIO_DISCONNECTED) {
cyhal_gpio_free(gpio_pin);
}
return (status == CY_RSLT_SUCCESS) ? 0 : -EIO;
}
static int gpio_cat1_port_get_raw(const struct device *dev,
uint32_t *value)
{
const struct gpio_cat1_config *const cfg = dev->config;
GPIO_PRT_Type *const base = cfg->regs;
*value = GPIO_PRT_IN(base);
return 0;
}
static int gpio_cat1_port_set_masked_raw(const struct device *dev,
uint32_t mask, uint32_t value)
{
const struct gpio_cat1_config *const cfg = dev->config;
GPIO_PRT_Type *const base = cfg->regs;
GPIO_PRT_OUT(base) = (GPIO_PRT_OUT(base) & ~mask) | (mask & value);
return 0;
}
static int gpio_cat1_port_set_bits_raw(const struct device *dev,
uint32_t mask)
{
const struct gpio_cat1_config *const cfg = dev->config;
GPIO_PRT_Type *const base = cfg->regs;
GPIO_PRT_OUT_SET(base) = mask;
return 0;
}
static int gpio_cat1_port_clear_bits_raw(const struct device *dev,
uint32_t mask)
{
const struct gpio_cat1_config *const cfg = dev->config;
GPIO_PRT_Type *const base = cfg->regs;
GPIO_PRT_OUT_CLR(base) = mask;
return 0;
}
static int gpio_cat1_port_toggle_bits(const struct device *dev,
uint32_t mask)
{
const struct gpio_cat1_config *const cfg = dev->config;
GPIO_PRT_Type *const base = cfg->regs;
GPIO_PRT_OUT_INV(base) = mask;
return 0;
}
static uint32_t gpio_cat1_get_pending_int(const struct device *dev)
{
const struct gpio_cat1_config *const cfg = dev->config;
GPIO_PRT_Type *const base = cfg->regs;
return GPIO_PRT_INTR_MASKED(base);
}
static void gpio_event_callback(void *callback_arg, cyhal_gpio_event_t event)
{
ARG_UNUSED(event);
uint32_t port_num = CYHAL_GET_PORT((uint32_t) callback_arg);
uint32_t pin_num = CYHAL_GET_PIN((uint32_t) callback_arg);
const struct device *dev = port_dev_obj[port_num];
/* Goes through and fires callback from a callback list */
if (dev) {
gpio_fire_callbacks(&((struct gpio_cat1_data *const)(dev)->data)->callbacks,
dev, 1 << pin_num);
}
/* NOTE: cyhal gpio handles cleaning of interrupts */
}
static int gpio_cat1_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
enum gpio_int_mode mode, enum gpio_int_trig trig)
{
const struct gpio_cat1_config *const cfg = dev->config;
cyhal_gpio_callback_data_t *cb_data_ptr = cfg->cb_data_ptr;
cyhal_gpio_event_t event = CYHAL_GPIO_IRQ_NONE;
/* Level interrupts (GPIO_INT_MODE_LEVEL) is not supported */
if (mode == GPIO_INT_MODE_LEVEL) {
return -ENOTSUP;
}
switch (trig) {
case GPIO_INT_TRIG_LOW:
event = CYHAL_GPIO_IRQ_FALL;
break;
case GPIO_INT_TRIG_HIGH:
event = CYHAL_GPIO_IRQ_RISE;
break;
case GPIO_INT_TRIG_BOTH:
/* Trigger detection on pin rising or falling edge (GPIO_INT_TRIG_BOTH)
* is not supported. Refer to SWINTEGRATION-696
*/
/* event = CYHAL_GPIO_IRQ_BOTH; */
return -ENOTSUP;
default:
return -ENOTSUP;
}
cyhal_gpio_t gpio_pin = CYHAL_GET_GPIO(GET_PORT_NUM(dev), pin);
/* Find index of free callback data structure */
uint32_t index;
for (index = 0u; index < cfg->ngpios; index++) {
if ((cb_data_ptr[index].callback == NULL) || (cb_data_ptr[index].pin == gpio_pin)) {
break;
}
}
if (index != cfg->ngpios) {
/* Store callback data: gpio callback and gpio device driver handle */
cb_data_ptr[index].callback = &gpio_event_callback;
cb_data_ptr[index].callback_arg = (void *)(gpio_pin);
/* Register/clear a callback handler for pin events */
cyhal_gpio_register_callback(gpio_pin, (mode == GPIO_INT_MODE_DISABLED) ?
NULL : &cb_data_ptr[index]);
/* Enable/disable the specified GPIO event */
cyhal_gpio_enable_event(gpio_pin, event, cfg->intr_priority,
(mode == GPIO_INT_MODE_DISABLED) ? false : true);
return 0;
} else {
return -EINVAL;
}
}
static int gpio_cat1_manage_callback(const struct device *port,
struct gpio_callback *callback,
bool set)
{
return gpio_manage_callback(&((struct gpio_cat1_data *const)(port)->data)->callbacks,
callback, set);
}
static const struct gpio_driver_api gpio_cat1_api = {
.pin_configure = gpio_cat1_configure,
.port_get_raw = gpio_cat1_port_get_raw,
.port_set_masked_raw = gpio_cat1_port_set_masked_raw,
.port_set_bits_raw = gpio_cat1_port_set_bits_raw,
.port_clear_bits_raw = gpio_cat1_port_clear_bits_raw,
.port_toggle_bits = gpio_cat1_port_toggle_bits,
.pin_interrupt_configure = gpio_cat1_pin_interrupt_configure,
.manage_callback = gpio_cat1_manage_callback,
.get_pending_int = gpio_cat1_get_pending_int,
};
#define GPIO_CAT1_INIT(n) \
\
cyhal_gpio_callback_data_t \
_cat1_gpio##n##_cb_data[DT_INST_PROP(n, ngpios)]; \
\
static const struct gpio_cat1_config _cat1_gpio##n##_config = { \
.common = { \
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \
}, \
.intr_priority = DT_INST_IRQ_BY_IDX(n, 0, priority), \
.cb_data_ptr = _cat1_gpio##n##_cb_data, \
.ngpios = DT_INST_PROP(n, ngpios), \
.regs = (GPIO_PRT_Type *)DT_INST_REG_ADDR(n), \
}; \
\
static struct gpio_cat1_data _cat1_gpio##n##_data; \
\
DEVICE_DT_INST_DEFINE(n, NULL, NULL, &_cat1_gpio##n##_data, \
&_cat1_gpio##n##_config, POST_KERNEL, \
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
&gpio_cat1_api);
DT_INST_FOREACH_STATUS_OKAY(GPIO_CAT1_INIT)