blob: eb52339364a29b0908dc8d28fac55a5bbcca3ff5 [file] [log] [blame]
/*
* Copyright (c) 2021 Nuvoton Technology Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nuvoton_nct38xx_gpio_alert
#include <zephyr/device.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/gpio/gpio_nct38xx.h>
#include <zephyr/drivers/mfd/nct38xx.h>
#include <zephyr/kernel.h>
#include <zephyr/sys/util_macro.h>
#include "gpio_nct38xx.h"
#include <zephyr/logging/log.h>
LOG_MODULE_DECLARE(gpio_ntc38xx, CONFIG_GPIO_LOG_LEVEL);
struct nct38xx_mfd {
/* Lock for NCT38xx register access */
struct k_sem *lock;
/* I2C device used for register access */
const struct i2c_dt_spec *i2c_dev;
};
/* Driver config */
struct nct38xx_alert_config {
/* Alert GPIO pin */
const struct gpio_dt_spec irq_gpio;
/* NCT38XX devices which share the same alert pin */
const struct device **nct38xx_dev;
/* Number of NCT38XX devices on the alert pin */
uint32_t nct38xx_num;
};
/* Driver data */
struct nct38xx_alert_data {
/* Alert handler device */
const struct device *alert_dev;
/* Alert pin callback */
struct gpio_callback gpio_cb;
/* Alert worker */
struct k_work alert_worker;
/* Lock for NCT38xx register access */
struct nct38xx_mfd *mfd;
};
static void nct38xx_alert_callback(const struct device *dev, struct gpio_callback *cb,
uint32_t pins)
{
ARG_UNUSED(pins);
struct nct38xx_alert_data *data = CONTAINER_OF(cb, struct nct38xx_alert_data, gpio_cb);
k_work_submit(&data->alert_worker);
}
static bool nct38xx_alert_is_active(struct nct38xx_mfd *mfd)
{
int ret;
uint16_t alert, mask;
k_sem_take(mfd->lock, K_FOREVER);
/* Clear alert */
ret = i2c_burst_read_dt(mfd->i2c_dev, NCT38XX_REG_ALERT, (uint8_t *)&alert,
sizeof(alert));
if (ret < 0) {
goto release_lock;
}
ret = i2c_burst_read_dt(mfd->i2c_dev, NCT38XX_REG_ALERT_MASK,
(uint8_t *)&mask, sizeof(mask));
if (ret < 0) {
goto release_lock;
}
alert &= mask;
if (alert) {
ret = i2c_burst_write_dt(mfd->i2c_dev, NCT38XX_REG_ALERT,
(uint8_t *)&alert, sizeof(alert));
}
release_lock:
k_sem_give(mfd->lock);
if (ret < 0) {
LOG_ERR("i2c access failed");
return false;
}
if (alert & BIT(NCT38XX_REG_ALERT_VENDOR_DEFINDED_ALERT)) {
return true;
}
return false;
}
static void nct38xx_alert_worker(struct k_work *work)
{
struct nct38xx_alert_data *const data =
CONTAINER_OF(work, struct nct38xx_alert_data, alert_worker);
const struct nct38xx_alert_config *const config = data->alert_dev->config;
do {
/* NCT38XX device handler */
for (int i = 0; i < config->nct38xx_num; i++) {
struct nct38xx_mfd *mfd = &data->mfd[i];
if (nct38xx_alert_is_active(mfd)) {
nct38xx_gpio_alert_handler(config->nct38xx_dev[i]);
}
}
/* While the interrupt signal is still active; we have more work to do. */
} while (gpio_pin_get_dt(&config->irq_gpio));
}
static int nct38xx_alert_init(const struct device *dev)
{
const struct nct38xx_alert_config *const config = dev->config;
struct nct38xx_alert_data *const data = dev->data;
int ret;
/* Check NCT38XX devices are all ready. */
for (int i = 0; i < config->nct38xx_num; i++) {
if (!device_is_ready(config->nct38xx_dev[i])) {
LOG_ERR("%s device not ready", config->nct38xx_dev[i]->name);
return -ENODEV;
}
data->mfd[i].lock = mfd_nct38xx_get_lock_reference(config->nct38xx_dev[i]);
data->mfd[i].i2c_dev = mfd_nct38xx_get_i2c_dt_spec(config->nct38xx_dev[i]);
}
/* Set the alert pin for handling the interrupt */
k_work_init(&data->alert_worker, nct38xx_alert_worker);
if (!gpio_is_ready_dt(&config->irq_gpio)) {
LOG_ERR("%s device not ready", config->irq_gpio.port->name);
return -ENODEV;
}
gpio_pin_configure_dt(&config->irq_gpio, GPIO_INPUT);
gpio_init_callback(&data->gpio_cb, nct38xx_alert_callback, BIT(config->irq_gpio.pin));
ret = gpio_add_callback(config->irq_gpio.port, &data->gpio_cb);
if (ret < 0) {
return ret;
}
gpio_pin_interrupt_configure_dt(&config->irq_gpio, GPIO_INT_EDGE_TO_ACTIVE);
return 0;
}
/* NCT38XX alert driver must be initialized after NCT38XX GPIO driver */
BUILD_ASSERT(CONFIG_GPIO_NCT38XX_ALERT_INIT_PRIORITY > CONFIG_GPIO_NCT38XX_INIT_PRIORITY);
#define NCT38XX_DEV_AND_COMMA(node_id, prop, idx) \
DEVICE_DT_GET(DT_PHANDLE_BY_IDX(node_id, prop, idx)),
#define NCT38XX_ALERT_DEVICE_INSTANCE(inst) \
const struct device *nct38xx_dev_##inst[] = { \
DT_INST_FOREACH_PROP_ELEM(inst, nct38xx_dev, NCT38XX_DEV_AND_COMMA)}; \
static struct nct38xx_mfd nct38xx_mfd_##inst[DT_INST_PROP_LEN(inst, nct38xx_dev)]; \
static const struct nct38xx_alert_config nct38xx_alert_cfg_##inst = { \
.irq_gpio = GPIO_DT_SPEC_INST_GET(inst, irq_gpios), \
.nct38xx_dev = &nct38xx_dev_##inst[0], \
.nct38xx_num = DT_INST_PROP_LEN(inst, nct38xx_dev), \
}; \
static struct nct38xx_alert_data nct38xx_alert_data_##inst = { \
.alert_dev = DEVICE_DT_INST_GET(inst), \
.mfd = nct38xx_mfd_##inst, \
}; \
DEVICE_DT_INST_DEFINE(inst, nct38xx_alert_init, NULL, &nct38xx_alert_data_##inst, \
&nct38xx_alert_cfg_##inst, POST_KERNEL, \
CONFIG_GPIO_NCT38XX_ALERT_INIT_PRIORITY, NULL);
DT_INST_FOREACH_STATUS_OKAY(NCT38XX_ALERT_DEVICE_INSTANCE)