| # SECO JUNO SBC-D23 board with a single STM32F302VCT6 chip | |
| # Flashing is possible by connecting the board to an ST-Link via SWD | |
| # https://edge.seco.com/juno.html | |
| source [find interface/stlink.cfg] | |
| transport select hla_swd | |
| source [find target/stm32f3x.cfg] | |
| reset_config srst_only | |
| $_TARGETNAME configure -event gdb-attach { | |
| echo "Debugger attaching: halting execution" | |
| reset halt | |
| gdb_breakpoint_override hard | |
| } | |
| $_TARGETNAME configure -event gdb-detach { | |
| echo "Debugger detaching: resuming execution" | |
| resume | |
| } |