| /* |
| * Copyright (c) 2022, NXP |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Note: File generated by rt_cfg_utils.py |
| * from teensy4.mex |
| */ |
| |
| #include <nxp/nxp_imx/rt/mimxrt1062dvl6a-pinctrl.dtsi> |
| |
| &pinctrl { |
| /* Mode Straps configuration DP83825 */ |
| pinmux_enet: pinmux_enet { |
| group0 { |
| pinmux = <&iomuxc_gpio_b1_04_enet_rx_data0>, |
| <&iomuxc_gpio_b1_06_enet_rx_en>, |
| <&iomuxc_gpio_b1_11_enet_rx_er>; |
| drive-strength = "r0-5"; |
| bias-pull-down; |
| bias-pull-down-value = "100k"; |
| slew-rate = "fast"; |
| nxp,speed = "200-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_b1_05_enet_rx_data1>; |
| drive-strength = "r0-5"; |
| bias-pull-up; |
| bias-pull-up-value = "22k"; |
| slew-rate = "fast"; |
| nxp,speed = "200-mhz"; |
| }; |
| group2 { |
| pinmux = <&iomuxc_gpio_b1_07_enet_tx_data0>, |
| <&iomuxc_gpio_b1_08_enet_tx_data1>, |
| <&iomuxc_gpio_b1_09_enet_tx_en>, |
| <&iomuxc_gpio_b1_14_enet_mdc>, |
| <&iomuxc_gpio_b1_15_enet_mdio>, |
| <&iomuxc_gpio_b0_15_gpio2_io15>, |
| <&iomuxc_gpio_b0_14_gpio2_io14>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group3 { |
| pinmux = <&iomuxc_gpio_b1_10_enet_ref_clk>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* FLEXCAN1 TX, RX on Teensy-Pins 22/23 */ |
| pinmux_flexcan1: pinmux_flexcan1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_08_flexcan1_tx>, |
| <&iomuxc_gpio_ad_b1_09_flexcan1_rx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* FLEXCAN2 TX, RX on Teensy-Pins 1/0 */ |
| pinmux_flexcan2: pinmux_flexcan2 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_02_flexcan2_tx>, |
| <&iomuxc_gpio_ad_b0_03_flexcan2_rx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* FLEXCAN3 TX, RX on Teensy-Pins 31/30 */ |
| pinmux_flexcan3: pinmux_flexcan3 { |
| group0 { |
| pinmux = <&iomuxc_gpio_emc_36_flexcan3_tx>, |
| <&iomuxc_gpio_emc_37_flexcan3_rx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* LPI2C1 SCL, SDA on Teensy-Pins 19/18 */ |
| pinmux_lpi2c1: pinmux_lpi2c1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_01_lpi2c1_sda>, |
| <&iomuxc_gpio_ad_b1_00_lpi2c1_scl>; |
| drive-strength = "r0-6"; |
| drive-open-drain; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* LPI2C3 SCL, SDA on Teensy-Pins 16/17 */ |
| pinmux_lpi2c3: pinmux_lpi2c3 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_07_lpi2c3_scl>, |
| <&iomuxc_gpio_ad_b1_06_lpi2c3_sda>; |
| drive-strength = "r0-6"; |
| drive-open-drain; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* LPI2C4 SCL, SDA on Teensy-Pins 24/25 */ |
| pinmux_lpi2c4: pinmux_lpi2c4 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_12_lpi2c4_scl>, |
| <&iomuxc_gpio_ad_b0_13_lpi2c4_sda>; |
| drive-strength = "r0-6"; |
| drive-open-drain; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| /* LPSPI3 MISO, MOSI, SCK, CS on Teensy-Pins 39/26/27/38 */ |
| pinmux_lpspi3: pinmux_lpspi3 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_12_lpspi3_pcs0>, |
| <&iomuxc_gpio_ad_b0_00_lpspi3_sck>, |
| <&iomuxc_gpio_ad_b0_02_lpspi3_sdi>, |
| <&iomuxc_gpio_ad_b0_01_lpspi3_sdo>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPSPI4 MISO, MOSI, SCK, CS on Teensy-Pins 12/11/13/10 */ |
| pinmux_lpspi4: pinmux_lpspi4 { |
| group0 { |
| pinmux = <&iomuxc_gpio_b0_00_lpspi4_pcs0>, |
| <&iomuxc_gpio_b0_03_lpspi4_sck>, |
| <&iomuxc_gpio_b0_01_lpspi4_sdi>, |
| <&iomuxc_gpio_b0_02_lpspi4_sdo>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART1 TX/RX on Teensy-Pins 20/21 */ |
| pinmux_lpuart1: pinmux_lpuart1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_13_lpuart1_rx>, |
| <&iomuxc_gpio_ad_b0_12_lpuart1_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart1_sleep: pinmux_lpuart1_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_13_gpio1_io13>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_ad_b0_12_lpuart1_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART2 TX/RX on Teensy-Pins 14/15 */ |
| pinmux_lpuart2: pinmux_lpuart2 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_03_lpuart2_rx>, |
| <&iomuxc_gpio_ad_b1_02_lpuart2_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart2_sleep: pinmux_lpuart2_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_03_gpio1_io19>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_ad_b1_02_lpuart2_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART3 TX/RX on Teensy-Pins 17/16 */ |
| pinmux_lpuart3: pinmux_lpuart3 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_07_lpuart3_rx>, |
| <&iomuxc_gpio_ad_b1_06_lpuart3_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart3_sleep: pinmux_lpuart3_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_07_gpio1_io23>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_ad_b1_06_lpuart3_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART4 TX/RX on Teensy-Pins 8/7 */ |
| pinmux_lpuart4: pinmux_lpuart4 { |
| group0 { |
| pinmux = <&iomuxc_gpio_b1_01_lpuart4_rx>, |
| <&iomuxc_gpio_b1_00_lpuart4_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart4_sleep: pinmux_lpuart4_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_b1_01_gpio2_io17>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_b1_00_lpuart4_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART5 TX/RX on Teensy-Pins 35/34 */ |
| pinmux_lpuart5: pinmux_lpuart5 { |
| group0 { |
| pinmux = <&iomuxc_gpio_b1_13_lpuart5_rx>, |
| <&iomuxc_gpio_b1_12_lpuart5_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart5_sleep: pinmux_lpuart5_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_b1_13_gpio2_io29>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_b1_12_lpuart5_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART6 TX/RX on Teensy-Pins 1/0 */ |
| pinmux_lpuart6: pinmux_lpuart6 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_03_lpuart6_rx>, |
| <&iomuxc_gpio_ad_b0_02_lpuart6_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart6_sleep: pinmux_lpuart6_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_03_gpio1_io03>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_ad_b0_02_lpuart6_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART7 TX/RX on Teensy-Pins 29/28 */ |
| pinmux_lpuart7: pinmux_lpuart7 { |
| group0 { |
| pinmux = <&iomuxc_gpio_emc_31_lpuart7_tx>, |
| <&iomuxc_gpio_emc_32_lpuart7_rx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart7_sleep: pinmux_lpuart7_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_emc_31_gpio4_io31>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_emc_32_lpuart7_rx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* LPUART8 TX/RX on Teensy-Pins 20/21 */ |
| pinmux_lpuart8: pinmux_lpuart8 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_11_lpuart8_rx>, |
| <&iomuxc_gpio_ad_b1_10_lpuart8_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart8_sleep: pinmux_lpuart8_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_11_gpio1_io27>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_ad_b1_10_lpuart8_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_usdhc1: pinmux_usdhc1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group2 { |
| pinmux = <&iomuxc_gpio_emc_41_usdhc1_vselect>; |
| drive-strength = "r0-4"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* fast pinmux settings for USDHC (over 100 Mhz) */ |
| pinmux_usdhc1_fast: pinmux_usdhc1_fast { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "200-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "200-mhz"; |
| }; |
| }; |
| |
| /* medium pinmux settings for USDHC (under 100 Mhz) */ |
| pinmux_usdhc1_med: pinmux_usdhc1_med { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* slow pinmux settings for USDHC (under 50 Mhz) */ |
| pinmux_usdhc1_slow: pinmux_usdhc1_slow { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "50-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "50-mhz"; |
| }; |
| }; |
| |
| }; |
| |