| # TMP007 infrared thermopile sensor configuration options |
| |
| # Copyright (c) 2016 Intel Corporation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig TMP007 |
| bool "TMP007 Infrared Thermopile Sensor" |
| depends on I2C |
| help |
| Enable driver for TMP007 infrared thermopile sensors. |
| |
| if TMP007 |
| |
| config TMP007_NAME |
| string "Driver name" |
| default "TMP007" |
| help |
| Device name with which the TMP007 sensor is identified. |
| |
| config TMP007_I2C_ADDR |
| hex "I2C address for TMP006 Sensor" |
| default "0x40" |
| help |
| I2C address of the TMP007 sensor. |
| |
| 0x40: A0 connected GND and A1 connected to GND. |
| 0x41: A0 connected VDD and A1 connected to GND. |
| 0x42: A0 connected SDA and A1 connected to GND. |
| 0x43: A0 connected SCL and A1 connected to GND. |
| 0x44: A0 connected GND and A1 connected to VDD. |
| 0x45: A0 connected VDD and A1 connected to VDD. |
| 0x46: A0 connected SDA and A1 connected to VDD. |
| 0x47: A0 connected SCL and A1 connected to VDD. |
| |
| config TMP007_I2C_MASTER_DEV_NAME |
| string "I2C master where TMP007 is connected" |
| default "I2C_0" |
| help |
| Specify the device name of the I2C master device to which the |
| TMP007 chip is connected. |
| |
| choice |
| prompt "Trigger mode" |
| default TMP007_TRIGGER_NONE |
| help |
| Specify the type of triggering to be used by the driver. |
| |
| config TMP007_TRIGGER_NONE |
| bool "No trigger" |
| |
| config TMP007_TRIGGER_GLOBAL_THREAD |
| bool "Use global thread" |
| depends on GPIO |
| select TMP007_TRIGGER |
| |
| config TMP007_TRIGGER_OWN_THREAD |
| bool "Use own thread" |
| depends on GPIO |
| select TMP007_TRIGGER |
| |
| endchoice |
| |
| config TMP007_TRIGGER |
| bool |
| |
| config TMP007_GPIO_DEV_NAME |
| string "GPIO device" |
| default "GPIO_0" |
| depends on TMP007_TRIGGER |
| help |
| The device name of the GPIO device to which the TMP007 interrupt |
| (alert) pin is connected. |
| |
| config TMP007_GPIO_PIN_NUM |
| int "Interrupt GPIO pin number" |
| default 0 |
| depends on TMP007_TRIGGER |
| help |
| The number of the GPIO pin on which the interrupt signal from the |
| TMP007 chip will be received. |
| |
| config TMP007_THREAD_PRIORITY |
| int "Thread priority" |
| depends on TMP007_TRIGGER_OWN_THREAD |
| default 10 |
| help |
| Priority of thread used by the driver to handle interrupts. |
| |
| config TMP007_THREAD_STACK_SIZE |
| int "Thread stack size" |
| depends on TMP007_TRIGGER_OWN_THREAD |
| default 1024 |
| help |
| Stack size of thread used by the driver to handle interrupts. |
| |
| endif # TMP007 |
