| CONFIG_NETWORKING=y |
| CONFIG_NET_LOG=y |
| CONFIG_LOG=y |
| CONFIG_NET_IPV6=y |
| CONFIG_NET_IPV4=y |
| CONFIG_NET_DHCPV4=n |
| CONFIG_NET_UDP=y |
| CONFIG_NET_TCP=y |
| CONFIG_NET_STATISTICS=y |
| CONFIG_NET_STATISTICS_USER_API=y |
| |
| CONFIG_TEST_RANDOM_GENERATOR=y |
| |
| CONFIG_NET_PKT_RX_COUNT=32 |
| CONFIG_NET_PKT_TX_COUNT=32 |
| CONFIG_NET_BUF_RX_COUNT=32 |
| CONFIG_NET_BUF_TX_COUNT=32 |
| CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=5 |
| CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=5 |
| CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=1 |
| CONFIG_NET_MAX_CONTEXTS=10 |
| |
| CONFIG_INIT_STACKS=y |
| CONFIG_PRINTK=y |
| CONFIG_NET_SHELL=y |
| |
| # Ethernet is needed for gPTP |
| CONFIG_NET_L2_ETHERNET=y |
| |
| CONFIG_NET_CONFIG_NEED_IPV6=y |
| CONFIG_NET_CONFIG_NEED_IPV4=y |
| CONFIG_NET_CONFIG_SETTINGS=y |
| |
| # There will be three network interfaces. gPTP will |
| # run in non-VLAN interface and then there are two extra |
| # VLAN interface for other use. This is just an example |
| # how to do this kind of setup. |
| |
| # First ethernet interface will use these settings |
| CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1" |
| CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2" |
| CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1" |
| CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2" |
| |
| # Second ethernet interface will have these settings |
| CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1" |
| # TEST-NET-2 from RFC 5737 |
| CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1" |
| # VLAN tag for the second interface |
| CONFIG_NET_SAMPLE_IFACE2_VLAN_TAG=100 |
| |
| # Settings for the third network interface |
| CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1" |
| # TEST-NET-3 from RFC 5737 |
| CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1" |
| # VLAN tag for the second interface |
| CONFIG_NET_SAMPLE_IFACE3_VLAN_TAG=200 |
| |
| # VLAN settings. We will have three VLANs, but the one running gPTP protocol |
| # will not have any tags (see IEEE 802.11AS chapter 11.3.3 for details) |
| CONFIG_NET_VLAN=y |
| CONFIG_NET_VLAN_COUNT=3 |
| |
| # gPTP settings |
| CONFIG_NET_GPTP=y |
| CONFIG_NET_GPTP_STATISTICS=y |
| |
| # Enable these if you want to run gPTP over a VLAN link |
| #CONFIG_NET_GPTP_VLAN=y |
| #CONFIG_NET_GPTP_VLAN_TAG=100 |
| |
| # How many traffic classes to enable |
| CONFIG_NET_TC_TX_COUNT=6 |
| CONFIG_NET_TC_RX_COUNT=4 |
| |
| # Enable priority support in net_context |
| CONFIG_NET_CONTEXT_PRIORITY=y |
