| /* |
| * Copyright (c) 2019 Gerson Fernando Budke |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <arm/armv7-m.dtsi> |
| #include <zephyr/dt-bindings/adc/adc.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <zephyr/dt-bindings/clock/atmel_sam_pmc.h> |
| |
| / { |
| aliases { |
| watchdog0 = &wdt; |
| }; |
| |
| chosen { |
| zephyr,flash-controller = &eefc; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m4f"; |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mpu: mpu@e000ed90 { |
| compatible = "arm,armv7m-mpu"; |
| reg = <0xe000ed90 0x40>; |
| }; |
| }; |
| }; |
| |
| soc { |
| pmc: pmc@400e0400 { |
| compatible = "atmel,sam-pmc"; |
| reg = <0x400e0400 0x200>; |
| interrupts = <5 0>; |
| #clock-cells = <2>; |
| status = "okay"; |
| }; |
| |
| supc: supc@400e1810 { |
| compatible = "atmel,sam-supc"; |
| reg = <0x400e1810 0x20>; |
| #wakeup-source-id-cells = <1>; |
| status = "okay"; |
| }; |
| |
| sram0: memory@20000000 { |
| compatible = "mmio-sram"; |
| }; |
| |
| afec0: adc@400b0000 { |
| compatible = "atmel,sam-afec"; |
| reg = <0x400b0000 0x4000>; |
| interrupts = <30 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| afec1: adc@400b4000 { |
| compatible = "atmel,sam-afec"; |
| reg = <0x400b4000 0x4000>; |
| interrupts = <31 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| eefc: flash-controller@400e0a00 { |
| compatible = "atmel,sam-flash-controller"; |
| reg = <0x400e0a00 0x200>; |
| interrupts = <6 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| status = "okay"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #erase-block-cells = <2>; |
| |
| flash0: flash@400000 { |
| compatible = "atmel,sam-flash", "soc-nv-flash"; |
| write-block-size = <8>; |
| erase-block-size = <4096>; |
| }; |
| }; |
| |
| wdt: watchdog@400e1850 { |
| compatible = "atmel,sam-watchdog"; |
| reg = <0x400e1850 0x10>; |
| interrupts = <4 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; |
| status = "disabled"; |
| }; |
| |
| twi0: i2c@400a8000 { |
| compatible = "atmel,sam-i2c-twi"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| reg = <0x400a8000 0x4000>; |
| interrupts = <17 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| twi1: i2c@400ac000 { |
| compatible = "atmel,sam-i2c-twi"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| reg = <0x400ac000 0x4000>; |
| interrupts = <18 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi0: spi@40088000 { |
| compatible = "atmel,sam-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40088000 0x4000>; |
| interrupts = <19 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| status = "disabled"; |
| }; |
| |
| uart0: uart@400e0600 { |
| compatible = "atmel,sam-uart"; |
| reg = <0x400e0600 0x140>; |
| interrupts = <7 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| status = "disabled"; |
| }; |
| |
| uart1: uart@40060600 { |
| compatible = "atmel,sam-uart"; |
| reg = <0x40060600 0x200>; |
| interrupts = <45 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; |
| status = "disabled"; |
| }; |
| |
| usart0: usart@400a0000 { |
| compatible = "atmel,sam-usart"; |
| reg = <0x400a0000 0x4000>; |
| interrupts = <14 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; |
| status = "disabled"; |
| }; |
| |
| usart1: usart@400a4000 { |
| compatible = "atmel,sam-usart"; |
| reg = <0x400a4000 0x4000>; |
| interrupts = <15 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; |
| status = "disabled"; |
| }; |
| |
| gmac: ethernet@40034000 { |
| compatible = "atmel,sam-gmac"; |
| reg = <0x40034000 0x4000>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| interrupts = <44 0>; |
| interrupt-names = "gmac"; |
| num-queues = <1>; |
| phy-connection-type = "mii"; |
| status = "disabled"; |
| }; |
| |
| mdio: mdio@40034000 { |
| compatible = "atmel,sam-mdio"; |
| reg = <0x40034000 0x4000>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| pinctrl: pinctrl@400e0e00 { |
| compatible = "atmel,sam-pinctrl"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x400e0e00 0x400e0e00 0xa00>; |
| status = "okay"; |
| |
| pioa: gpio@400e0e00 { |
| compatible = "atmel,sam-gpio"; |
| reg = <0x400e0e00 0x200>; |
| interrupts = <9 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #atmel,pin-cells = <2>; |
| }; |
| |
| piob: gpio@400e1000 { |
| compatible = "atmel,sam-gpio"; |
| reg = <0x400e1000 0x200>; |
| interrupts = <10 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #atmel,pin-cells = <2>; |
| }; |
| |
| pioc: gpio@400e1200 { |
| compatible = "atmel,sam-gpio"; |
| reg = <0x400e1200 0x200>; |
| interrupts = <11 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #atmel,pin-cells = <2>; |
| }; |
| |
| piod: gpio@400e1400 { |
| compatible = "atmel,sam-gpio"; |
| reg = <0x400e1400 0x200>; |
| interrupts = <12 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #atmel,pin-cells = <2>; |
| }; |
| |
| pioe: gpio@400e1600 { |
| compatible = "atmel,sam-gpio"; |
| reg = <0x400e1600 0x200>; |
| interrupts = <13 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #atmel,pin-cells = <2>; |
| }; |
| }; |
| |
| tc0: tc@40090000 { |
| compatible = "atmel,sam-tc"; |
| reg = <0x40090000 0x100>; |
| interrupts = <21 0 |
| 22 0 |
| 23 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, |
| <&pmc PMC_TYPE_PERIPHERAL 22>, |
| <&pmc PMC_TYPE_PERIPHERAL 23>; |
| status = "disabled"; |
| }; |
| |
| tc1: tc@40094000 { |
| compatible = "atmel,sam-tc"; |
| reg = <0x40094000 0x100>; |
| interrupts = <24 0 |
| 25 0 |
| 26 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, |
| <&pmc PMC_TYPE_PERIPHERAL 25>, |
| <&pmc PMC_TYPE_PERIPHERAL 26>; |
| status = "disabled"; |
| }; |
| |
| tc2: tc@40098000 { |
| compatible = "atmel,sam-tc"; |
| reg = <0x40098000 0x100>; |
| interrupts = <27 0 |
| 28 0 |
| 29 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, |
| <&pmc PMC_TYPE_PERIPHERAL 28>, |
| <&pmc PMC_TYPE_PERIPHERAL 29>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@40000000 { |
| compatible = "atmel,sam-pwm"; |
| reg = <0x40000000 0x4000>; |
| interrupts = <36 1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; |
| prescaler = <10>; |
| divider = <1>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| rstc: rstc@400e1800 { |
| compatible = "atmel,sam-rstc"; |
| reg = <0x400e1800 0x10>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 1>; |
| user-nrst; |
| }; |
| |
| smc: smc@40060000 { |
| compatible = "atmel,sam-smc"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40060000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; |
| status = "disabled"; |
| }; |
| |
| hsmci: hsmci@40080000 { |
| compatible = "atmel,sam-hsmci"; |
| reg = <0x40080000 0x1000>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; |
| status = "disabled"; |
| }; |
| |
| rtc: rtc@400e1860 { |
| compatible = "atmel,sam-rtc"; |
| reg = <0x400e1860 0x100>; |
| interrupts = <2 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; |
| alarms-count = <1>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <4>; |
| }; |
