| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef _FSL_DSPI_EDMA_H_ |
| #define _FSL_DSPI_EDMA_H_ |
| |
| #include "fsl_dspi.h" |
| #include "fsl_edma.h" |
| /*! |
| * @addtogroup dspi_edma_driver |
| * @{ |
| */ |
| |
| /*********************************************************************************************************************** |
| * Definitions |
| **********************************************************************************************************************/ |
| |
| /*! |
| * @brief Forward declaration of the DSPI eDMA master handle typedefs. |
| */ |
| typedef struct _dspi_master_edma_handle dspi_master_edma_handle_t; |
| |
| /*! |
| * @brief Forward declaration of the DSPI eDMA slave handle typedefs. |
| */ |
| typedef struct _dspi_slave_edma_handle dspi_slave_edma_handle_t; |
| |
| /*! |
| * @brief Completion callback function pointer type. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the handle for the DSPI master. |
| * @param status Success or error code describing whether the transfer completed. |
| * @param userData An arbitrary pointer-dataSized value passed from the application. |
| */ |
| typedef void (*dspi_master_edma_transfer_callback_t)(SPI_Type *base, |
| dspi_master_edma_handle_t *handle, |
| status_t status, |
| void *userData); |
| /*! |
| * @brief Completion callback function pointer type. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the handle for the DSPI slave. |
| * @param status Success or error code describing whether the transfer completed. |
| * @param userData An arbitrary pointer-dataSized value passed from the application. |
| */ |
| typedef void (*dspi_slave_edma_transfer_callback_t)(SPI_Type *base, |
| dspi_slave_edma_handle_t *handle, |
| status_t status, |
| void *userData); |
| |
| /*! @brief DSPI master eDMA transfer handle structure used for the transactional API. */ |
| struct _dspi_master_edma_handle |
| { |
| uint32_t bitsPerFrame; /*!< The desired number of bits per frame. */ |
| volatile uint32_t command; /*!< The desired data command. */ |
| volatile uint32_t lastCommand; /*!< The desired last data command. */ |
| |
| uint8_t fifoSize; /*!< FIFO dataSize. */ |
| |
| volatile bool |
| isPcsActiveAfterTransfer; /*!< Indicates whether the PCS signal keeps active after the last frame transfer.*/ |
| |
| uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */ |
| volatile uint8_t state; /*!< DSPI transfer state , _dspi_transfer_state.*/ |
| |
| uint8_t *volatile txData; /*!< Send buffer. */ |
| uint8_t *volatile rxData; /*!< Receive buffer. */ |
| volatile size_t remainingSendByteCount; /*!< A number of bytes remaining to send.*/ |
| volatile size_t remainingReceiveByteCount; /*!< A number of bytes remaining to receive.*/ |
| size_t totalByteCount; /*!< A number of transfer bytes*/ |
| |
| uint32_t rxBuffIfNull; /*!< Used if there is not rxData for DMA purpose.*/ |
| uint32_t txBuffIfNull; /*!< Used if there is not txData for DMA purpose.*/ |
| |
| dspi_master_edma_transfer_callback_t callback; /*!< Completion callback. */ |
| void *userData; /*!< Callback user data. */ |
| |
| edma_handle_t *edmaRxRegToRxDataHandle; /*!<edma_handle_t handle point used for RxReg to RxData buff*/ |
| edma_handle_t *edmaTxDataToIntermediaryHandle; /*!<edma_handle_t handle point used for TxData to Intermediary*/ |
| edma_handle_t *edmaIntermediaryToTxRegHandle; /*!<edma_handle_t handle point used for Intermediary to TxReg*/ |
| |
| edma_tcd_t dspiSoftwareTCD[2]; /*!<SoftwareTCD , internal used*/ |
| }; |
| |
| /*! @brief DSPI slave eDMA transfer handle structure used for the transactional API.*/ |
| struct _dspi_slave_edma_handle |
| { |
| uint32_t bitsPerFrame; /*!< The desired number of bits per frame. */ |
| |
| uint8_t *volatile txData; /*!< Send buffer. */ |
| uint8_t *volatile rxData; /*!< Receive buffer. */ |
| volatile size_t remainingSendByteCount; /*!< A number of bytes remaining to send.*/ |
| volatile size_t remainingReceiveByteCount; /*!< A number of bytes remaining to receive.*/ |
| size_t totalByteCount; /*!< A number of transfer bytes*/ |
| |
| uint32_t rxBuffIfNull; /*!< Used if there is not rxData for DMA purpose.*/ |
| uint32_t txBuffIfNull; /*!< Used if there is not txData for DMA purpose.*/ |
| uint32_t txLastData; /*!< Used if there is an extra byte when 16bits per frame for DMA purpose.*/ |
| |
| uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */ |
| |
| volatile uint8_t state; /*!< DSPI transfer state.*/ |
| |
| dspi_slave_edma_transfer_callback_t callback; /*!< Completion callback. */ |
| void *userData; /*!< Callback user data. */ |
| |
| edma_handle_t *edmaRxRegToRxDataHandle; /*!<edma_handle_t handle point used for RxReg to RxData buff*/ |
| edma_handle_t *edmaTxDataToTxRegHandle; /*!<edma_handle_t handle point used for TxData to TxReg*/ |
| }; |
| |
| /*********************************************************************************************************************** |
| * API |
| **********************************************************************************************************************/ |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif /*_cplusplus*/ |
| |
| /*Transactional APIs*/ |
| |
| /*! |
| * @brief Initializes the DSPI master eDMA handle. |
| * |
| * This function initializes the DSPI eDMA handle which can be used for other DSPI transactional APIs. Usually, for a |
| * specified DSPI instance, call this API once to get the initialized handle. |
| * |
| * Note that DSPI eDMA has separated (RX and TX as two sources) or shared (RX and TX are the same source) DMA request |
| * source. |
| * (1) For the separated DMA request source, enable and set the RX DMAMUX source for edmaRxRegToRxDataHandle and |
| * TX DMAMUX source for edmaIntermediaryToTxRegHandle. |
| * (2) For the shared DMA request source, enable and set the RX/RX DMAMUX source for the edmaRxRegToRxDataHandle. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle DSPI handle pointer to dspi_master_edma_handle_t. |
| * @param callback DSPI callback. |
| * @param userData A callback function parameter. |
| * @param edmaRxRegToRxDataHandle edmaRxRegToRxDataHandle pointer to edma_handle_t. |
| * @param edmaTxDataToIntermediaryHandle edmaTxDataToIntermediaryHandle pointer to edma_handle_t. |
| * @param edmaIntermediaryToTxRegHandle edmaIntermediaryToTxRegHandle pointer to edma_handle_t. |
| */ |
| void DSPI_MasterTransferCreateHandleEDMA(SPI_Type *base, |
| dspi_master_edma_handle_t *handle, |
| dspi_master_edma_transfer_callback_t callback, |
| void *userData, |
| edma_handle_t *edmaRxRegToRxDataHandle, |
| edma_handle_t *edmaTxDataToIntermediaryHandle, |
| edma_handle_t *edmaIntermediaryToTxRegHandle); |
| |
| /*! |
| * @brief DSPI master transfer data using eDMA. |
| * |
| * This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data |
| * is transferred, the callback function is called. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state. |
| * @param transfer A pointer to the dspi_transfer_t structure. |
| * @return status of status_t. |
| */ |
| status_t DSPI_MasterTransferEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, dspi_transfer_t *transfer); |
| |
| /*! |
| * @brief DSPI master aborts a transfer which is using eDMA. |
| * |
| * This function aborts a transfer which is using eDMA. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state. |
| */ |
| void DSPI_MasterTransferAbortEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle); |
| |
| /*! |
| * @brief Gets the master eDMA transfer count. |
| * |
| * This function gets the master eDMA transfer count. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state. |
| * @param count A number of bytes transferred by the non-blocking transaction. |
| * @return status of status_t. |
| */ |
| status_t DSPI_MasterTransferGetCountEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, size_t *count); |
| |
| /*! |
| * @brief Initializes the DSPI slave eDMA handle. |
| * |
| * This function initializes the DSPI eDMA handle which can be used for other DSPI transactional APIs. Usually, for a |
| * specified DSPI instance, call this API once to get the initialized handle. |
| * |
| * Note that DSPI eDMA has separated (RN and TX in 2 sources) or shared (RX and TX are the same source) DMA request |
| * source. |
| * (1)For the separated DMA request source, enable and set the RX DMAMUX source for edmaRxRegToRxDataHandle and |
| * TX DMAMUX source for edmaTxDataToTxRegHandle. |
| * (2)For the shared DMA request source, enable and set the RX/RX DMAMUX source for the edmaRxRegToRxDataHandle. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle DSPI handle pointer to dspi_slave_edma_handle_t. |
| * @param callback DSPI callback. |
| * @param userData A callback function parameter. |
| * @param edmaRxRegToRxDataHandle edmaRxRegToRxDataHandle pointer to edma_handle_t. |
| * @param edmaTxDataToTxRegHandle edmaTxDataToTxRegHandle pointer to edma_handle_t. |
| */ |
| void DSPI_SlaveTransferCreateHandleEDMA(SPI_Type *base, |
| dspi_slave_edma_handle_t *handle, |
| dspi_slave_edma_transfer_callback_t callback, |
| void *userData, |
| edma_handle_t *edmaRxRegToRxDataHandle, |
| edma_handle_t *edmaTxDataToTxRegHandle); |
| |
| /*! |
| * @brief DSPI slave transfer data using eDMA. |
| * |
| * This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data |
| * is transferred, the callback function is called. |
| * Note that the slave eDMA transfer doesn't support transfer_size is 1 when the bitsPerFrame is greater |
| * than eight. |
| |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state. |
| * @param transfer A pointer to the dspi_transfer_t structure. |
| * @return status of status_t. |
| */ |
| status_t DSPI_SlaveTransferEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, dspi_transfer_t *transfer); |
| |
| /*! |
| * @brief DSPI slave aborts a transfer which is using eDMA. |
| * |
| * This function aborts a transfer which is using eDMA. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state. |
| */ |
| void DSPI_SlaveTransferAbortEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle); |
| |
| /*! |
| * @brief Gets the slave eDMA transfer count. |
| * |
| * This function gets the slave eDMA transfer count. |
| * |
| * @param base DSPI peripheral base address. |
| * @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state. |
| * @param count A number of bytes transferred so far by the non-blocking transaction. |
| * @return status of status_t. |
| */ |
| status_t DSPI_SlaveTransferGetCountEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, size_t *count); |
| |
| #if defined(__cplusplus) |
| } |
| #endif /*_cplusplus*/ |
| /*! |
| *@} |
| */ |
| |
| #endif /*_FSL_DSPI_EDMA_H_*/ |