| set ESP_RTOS none | |
| # ESP32C3 has built-in JTAG interface over USB port in pins GPIO18/GPIO19 (D-/D+). | |
| # Uncomment the line below to enable USB debugging. | |
| # source [find interface/esp_usb_jtag.cfg] | |
| # Otherwise, use external JTAG programmer as ESP-Prog | |
| source [find interface/ftdi/esp32_devkitj_v1.cfg] | |
| source [find target/esp32c3.cfg] | |
| adapter_khz 5000 |