| # Infineon CAT1 Flash configuration options |
| |
| # Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) or |
| # an affiliate of Cypress Semiconductor Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config FLASH_INFINEON_CAT1 |
| bool "Infineon CAT1 FLASH driver" |
| default y |
| depends on DT_HAS_INFINEON_FLASH_CONTROLLER_ENABLED |
| depends on USE_INFINEON_LEGACY_HAL |
| select FLASH_HAS_PAGE_LAYOUT |
| select FLASH_HAS_DRIVER_ENABLED |
| select USE_INFINEON_FLASH |
| select FLASH_HAS_EXPLICIT_ERASE |
| help |
| Enable the Flash driver for Infineon CAT1 family. |
| |
| config FLASH_INFINEON_RRAM |
| bool "Infineon CAT1 FLASH RRAM driver" |
| default y |
| depends on DT_HAS_INFINEON_RRAM_CONTROLLER_ENABLED |
| depends on SOC_FAMILY_INFINEON_EDGE |
| select FLASH_HAS_PAGE_LAYOUT |
| select FLASH_HAS_DRIVER_ENABLED |
| select USE_INFINEON_FLASH_RRAM |
| select FLASH_HAS_NO_EXPLICIT_ERASE |
| help |
| Enable the Flash RRAM driver for Infineon Edge family. |
| |
| config FLASH_INFINEON_PSOC4 |
| bool "Infineon FLASH driver" |
| default y |
| depends on DT_HAS_INFINEON_FLASH_CONTROLLER_ENABLED |
| depends on !USE_INFINEON_LEGACY_HAL |
| select FLASH_HAS_DRIVER_ENABLED |
| select FLASH_HAS_PAGE_LAYOUT |
| select FLASH_HAS_NO_EXPLICIT_ERASE |
| select USE_INFINEON_FLASH |
| help |
| Enable the Flash driver for Infineon PSoC4 family. |
| |
| config INFINEON_CAT1_QSPI_FLASH |
| bool "Infineon CAT1 QSPI FLASH driver" |
| default y |
| depends on DT_HAS_INFINEON_QSPI_FLASH_ENABLED |
| select FLASH_HAS_PAGE_LAYOUT |
| select FLASH_HAS_DRIVER_ENABLED |
| select USE_INFINEON_FLASH |
| select USE_INFINEON_SMIF |
| select USE_INFINEON_DMA |
| select PINCTRL |
| select FLASH_HAS_EXPLICIT_ERASE |
| help |
| Enable the QSPI Flash driver for Infineon CAT1 family. |
| |
| config FLASH_INFINEON_SMIF_HW_INIT |
| bool "Initialize SMIF hardware in the flash driver" |
| depends on INFINEON_CAT1_QSPI_FLASH |
| depends on SOC_SERIES_PSE84 |
| help |
| Enable full SMIF hardware initialization (pins, clocks, peripheral |
| groups, and SMIF peripheral) in the flash driver init function. |
| This is required when the first application boots from internal |
| RRAM and the ROM extended boot has not configured SMIF. |
| When disabled, the driver assumes SMIF is already initialized |
| (e.g., by the ROM when booting from external flash). |
