| CONFIG_IPC_SERVICE=y |
| CONFIG_MBOX=y |
| |
| CONFIG_ISR_STACK_SIZE=1024 |
| CONFIG_IDLE_STACK_SIZE=256 |
| CONFIG_MAIN_STACK_SIZE=512 |
| CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512 |
| CONFIG_IPC_SERVICE_BACKEND_RPMSG_WQ_STACK_SIZE=512 |
| CONFIG_HEAP_MEM_POOL_SIZE=8192 |
| |
| CONFIG_BT=y |
| CONFIG_BT_HCI_RAW=y |
| CONFIG_BT_HCI_RAW_RESERVE=1 |
| CONFIG_BT_MAX_CONN=2 |
| |
| # Workaround: Unable to allocate command buffer when using K_NO_WAIT since |
| # Host number of completed commands does not follow normal flow control. |
| CONFIG_BT_BUF_CMD_TX_COUNT=10 |
| |
| CONFIG_BT_BUF_EVT_RX_COUNT=16 |
| |
| CONFIG_BT_BUF_EVT_RX_SIZE=255 |
| CONFIG_BT_BUF_ACL_RX_SIZE=255 |
| CONFIG_BT_BUF_ACL_TX_SIZE=251 |
| CONFIG_BT_BUF_CMD_TX_SIZE=255 |
| |
| # Tx/Rx Thread Stack Sizes |
| CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT=y |
| CONFIG_BT_HCI_TX_STACK_SIZE=1152 |
| CONFIG_BT_RX_STACK_SIZE=640 |
| CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE=448 |
| |
| # Host features |
| CONFIG_BT_EXT_ADV=y |
| CONFIG_BT_PER_ADV=y |
| CONFIG_BT_PER_ADV_SYNC=y |
| CONFIG_BT_PER_ADV_SYNC_MAX=2 |
| |
| # Controller |
| CONFIG_BT_LL_SW_SPLIT=y |
| CONFIG_BT_CTLR_ASSERT_HANDLER=y |
| CONFIG_BT_CTLR_DTM_HCI=y |
| |
| # Rx ACL and Adv Reports |
| CONFIG_BT_CTLR_RX_BUFFERS=9 |
| CONFIG_BT_CTLR_DATA_LENGTH_MAX=251 |
| |
| # Coded PHY support |
| CONFIG_BT_CTLR_PHY_CODED=y |
| |
| # Advertising Sets and Extended Scanning |
| CONFIG_BT_CTLR_ADV_EXT=y |
| CONFIG_BT_CTLR_ADV_SET=3 |
| CONFIG_BT_CTLR_ADV_DATA_LEN_MAX=191 |
| CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX=1650 |
| |
| CONFIG_BT_CTLR_ADVANCED_FEATURES=y |
| CONFIG_BT_CTLR_ADV_AUX_SET=3 |
| CONFIG_BT_CTLR_ADV_AUX_PDU_BACK2BACK=y |
| CONFIG_BT_CTLR_ADV_SYNC_SET=3 |
| CONFIG_BT_CTLR_ADV_SYNC_PDU_BACK2BACK=y |
| CONFIG_BT_CTLR_ADV_DATA_BUF_MAX=6 |
| |
| # Increase the below to receive interleaved advertising chains |
| CONFIG_BT_CTLR_SCAN_AUX_SET=1 |
| |
| CONFIG_BT_CTLR_SCAN_UNRESERVED=y |
| CONFIG_BT_TICKER_NEXT_SLOT_GET_MATCH=y |
| |
| # Control Procedure |
| CONFIG_BT_CTLR_LLCP_LOCAL_PROC_CTX_BUF_NUM=6 |
| |
| # Direction Finding |
| CONFIG_BT_CTLR_DF=y |
| CONFIG_BT_CTLR_DF_PER_ADV_CTE_NUM_MAX=3 |
| CONFIG_BT_CTLR_DF_PER_SCAN_CTE_NUM_MAX=3 |
| |
| # Direction Finding Tx |
| CONFIG_BT_CTLR_DF_CTE_TX=y |
| CONFIG_BT_CTLR_DF_CONN_CTE_TX=y |
| CONFIG_BT_CTLR_DF_ANT_SWITCH_TX=y |
| CONFIG_BT_CTLR_DF_CONN_CTE_RSP=y |
| |
| # Direction Finding Rx |
| CONFIG_BT_CTLR_DF_CTE_RX=y |
| CONFIG_BT_CTLR_DF_CONN_CTE_RX=y |
| CONFIG_BT_CTLR_DF_ANT_SWITCH_RX=y |
| CONFIG_BT_CTLR_DF_CONN_CTE_REQ=y |
