| /* |
| * Copyright (c) 2022 Actinius |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include "actinius_icarus_som_dk_common-pinctrl.dtsi" |
| #include <dt-bindings/led/led.h> |
| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| |
| / { |
| model = "Actinius Icarus SoM DK"; |
| compatible = "actinius,icarus_som_dk"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| blue_led: led_0 { |
| gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; |
| label = "Blue LED"; |
| }; |
| }; |
| |
| pwmleds { |
| compatible = "pwm-leds"; |
| |
| blue_pwm_led: led_pwm_0 { |
| pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>; |
| label = "Blue PWM LED"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| |
| button0: button_0 { |
| gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push Button 1"; |
| zephyr,code = <INPUT_KEY_0>; |
| }; |
| }; |
| |
| aliases { |
| led0 = &blue_led; |
| pwm-led0 = &blue_pwm_led; |
| blue-pwm-led = &blue_pwm_led; |
| sw0 = &button0; |
| bootloader-led0 = &blue_led; |
| mcuboot-button0 = &button0; |
| mcuboot-led0 = &blue_led; |
| watchdog0 = &wdt0; |
| accel0 = &lis2dh12_accel; |
| led-strip = &neopixel_led; |
| }; |
| |
| sim_select: sim-select { |
| compatible = "actinius-sim-select"; |
| sim-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
| sim = "esim"; |
| }; |
| }; |
| |
| &adc { |
| status ="okay"; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| |
| current-speed = <115200>; |
| pinctrl-0 = <&uart0_default>; |
| pinctrl-1 = <&uart0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| neopixel_spi: &spi1 { |
| compatible = "nordic,nrf-spim"; |
| status = "okay"; |
| |
| pinctrl-0 = <&neopixel_spi_default>; |
| pinctrl-1 = <&neopixel_spi_sleep>; |
| pinctrl-names = "default", "sleep"; |
| |
| neopixel_led: ws2812@0 { |
| compatible = "worldsemi,ws2812-spi"; |
| |
| reg = <0>; /* ignored, but necessary for SPI bindings */ |
| spi-max-frequency = <4000000>; |
| |
| chain-length = <1>; |
| color-mapping = <LED_COLOR_ID_GREEN |
| LED_COLOR_ID_RED |
| LED_COLOR_ID_BLUE>; |
| spi-one-frame = <0x70>; |
| spi-zero-frame = <0x40>; |
| }; |
| }; |
| |
| &i2c2 { |
| compatible = "nordic,nrf-twim"; |
| status = "okay"; |
| |
| clock-frequency = <I2C_BITRATE_FAST>; |
| |
| pinctrl-0 = <&i2c2_default>; |
| pinctrl-1 = <&i2c2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| lis2dh12_accel: lis2dh12-accel@19 { |
| compatible = "st,lis2dh12", "st,lis2dh"; |
| reg = <0x19>; |
| irq-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>, |
| <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &spi3 { |
| compatible = "nordic,nrf-spim"; |
| status = "okay"; |
| |
| cs-gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| |
| pinctrl-0 = <&spi3_default>; |
| pinctrl-1 = <&spi3_sleep>; |
| pinctrl-names = "default", "sleep"; |
| w25q64: w25q64jv@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <80000000>; |
| jedec-id = [ef 40 17]; |
| size = <0x4000000>; |
| has-dpd; |
| t-enter-dpd = <3500>; |
| t-exit-dpd = <3500>; |
| }; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| |
| pinctrl-0 = <&pwm0_default>; |
| pinctrl-1 = <&pwm0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| /* Include file with mappings and aliases for arduino compatibility */ |
| #include "arduino_connector.dtsi" |
| |
| /* Include default memory partition configuration file */ |
| #include <common/nordic/nrf91xx_partition.dtsi> |