| /* |
| * Copyright (c) 2024 Luis Ubieda |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf52840_qiaa.dtsi> |
| #include "croxel_cx1825_nrf52840-pinctrl.dtsi" |
| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| |
| / { |
| model = "Croxel CX1825 NRF52840"; |
| compatible = "croxel,cx1825-nrf52840"; |
| |
| chosen { |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| zephyr,console = &cdc_acm_0; |
| zephyr,shell-uart = &cdc_acm_0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0: led_0 { |
| gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
| label = "Red LED"; |
| }; |
| led1: led_1 { |
| gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
| label = "Green LED"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| gpios = <&gpio0 16 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button switch 0"; |
| zephyr,code = <INPUT_KEY_0>; |
| }; |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| led0 = &led0; |
| led1 = &led1; |
| sw0 = &button0; |
| bootloader-led0 = &led0; |
| mcuboot-button0 = &button0; |
| mcuboot-led0 = &led0; |
| watchdog0 = &wdt0; |
| }; |
| }; |
| |
| &adc { |
| status = "okay"; |
| }; |
| |
| &uicr { |
| gpio-as-nreset; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| pinctrl-0 = <&pwm0_default>; |
| pinctrl-1 = <&pwm0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &i2c0 { |
| compatible = "nordic,nrf-twi"; |
| status = "okay"; |
| pinctrl-0 = <&i2c0_default>; |
| pinctrl-1 = <&i2c0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| |
| hts221: hts221@5f { |
| compatible = "st,hts221"; |
| status = "okay"; |
| reg = <0x5f>; |
| drdy-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| lps22hb: lps22hb-press@5c { |
| compatible = "st,lps22hb-press"; |
| status = "okay"; |
| reg = <0x5c>; |
| }; |
| |
| apds9960: apds9960@39 { |
| compatible = "avago,apds9960"; |
| status = "okay"; |
| reg = <0x39>; |
| int-gpios = <&gpio0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| }; |
| |
| lis3dh: lis3dh@18 { |
| compatible = "st,lis3dh", "st,lis2dh"; |
| status = "okay"; |
| reg = <0x18>; |
| irq-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| zephyr_udc0: &usbd { |
| compatible = "nordic,nrf-usbd"; |
| status = "okay"; |
| |
| cdc_acm_0: cdc_acm_0 { |
| compatible = "zephyr,cdc-acm-uart"; |
| }; |
| }; |
| |
| &flash0 { |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0x0000C000>; |
| }; |
| slot0_partition: partition@c000 { |
| label = "image-0"; |
| reg = <0x0000C000 0x00076000>; |
| }; |
| slot1_partition: partition@82000 { |
| label = "image-1"; |
| reg = <0x00082000 0x00076000>; |
| }; |
| |
| /* |
| * Storage partition will be used by FCB/LittleFS/NVS |
| * if enabled. |
| */ |
| storage_partition: partition@f8000 { |
| label = "storage"; |
| reg = <0x000f8000 0x00008000>; |
| }; |
| }; |
| }; |