blob: a9bfe8d6d9f1b6475d5fdd7e4de47eadcff48e77 [file] [log] [blame]
/*
* NOTE: Autogenerated file by gen_board_pinctrl.py
* for MK66FN2M0VMD18/signal_configuration.xml
*
* Copyright (c) 2022, NXP
* SPDX-License-Identifier: Apache-2.0
*/
#include <nxp/kinetis/MK66FN2M0VMD18-pinctrl.h>
&pinctrl {
mdio_default: mdio_default {
group0 {
pinmux = <RMII0_MDIO_PTB0>;
drive-strength = "low";
drive-open-drain;
bias-pull-up;
slew-rate = "fast";
};
group1 {
pinmux = <RMII0_MDC_PTB1>;
drive-strength = "low";
slew-rate = "fast";
};
};
enet_default: enet_default {
group0 {
pinmux = <RMII0_RXER_PTA5>,
<RMII0_RXD1_PTA12>,
<RMII0_RXD0_PTA13>,
<RMII0_CRS_DV_PTA14>,
<RMII0_TXEN_PTA15>,
<RMII0_TXD1_PTA17>,
<RMII0_TXD0_PTA16>;
drive-strength = "low";
slew-rate = "fast";
};
};
flexcan0_default: flexcan0_default {
group0 {
pinmux = <CAN0_RX_PTB19>,
<CAN0_TX_PTB18>;
drive-strength = "low";
slew-rate = "fast";
};
};
flexcan1_default: flexcan1_default {
group0 {
pinmux = <CAN1_RX_PTC16>,
<CAN1_TX_PTC17>;
drive-strength = "low";
slew-rate = "fast";
};
};
ftm0_default: ftm0_default {
group0 {
pinmux = <FTM0_CH0_PTC1>,
<FTM0_CH3_PTA6>,
<FTM0_CH4_PTD4>,
<FTM0_CH5_PTD5>;
drive-strength = "low";
slew-rate = "fast";
};
};
/* conflicts with UART2 */
ftm3_default: ftm3_default {
group0 {
pinmux = <FTM3_CH1_PTD1>,
<FTM3_CH4_PTC8>,
<FTM3_CH5_PTC9>,
<FTM3_CH6_PTE11>,
<FTM3_CH7_PTE12>;
drive-strength = "low";
slew-rate = "fast";
};
};
i2c0_default: i2c0_default {
group0 {
pinmux = <I2C0_SCL_PTE24>;
drive-strength = "low";
slew-rate = "fast";
};
group1 {
pinmux = <I2C0_SDA_PTE25>;
drive-strength = "low";
slew-rate = "fast";
drive-open-drain;
};
};
i2c1_default: i2c1_default {
group0 {
pinmux = <I2C1_SCL_PTC10>;
drive-strength = "low";
slew-rate = "fast";
};
group1 {
pinmux = <I2C1_SDA_PTC11>;
drive-strength = "low";
slew-rate = "fast";
drive-open-drain;
};
};
lpuart0_default: lpuart0_default {
group0 {
pinmux = <LPUART0_RX_PTD8>;
drive-strength = "low";
bias-pull-up;
slew-rate = "fast";
};
group1 {
pinmux = <LPUART0_TX_PTD9>;
drive-strength = "low";
slew-rate = "fast";
};
};
spi0_default: spi0_default {
group0 {
pinmux = <SPI0_PCS2_PTC2>,
<SPI0_SCK_PTC5>,
<SPI0_SIN_PTC7>,
<SPI0_SOUT_PTC6>;
drive-strength = "low";
slew-rate = "fast";
};
};
spi1_default: spi1_default {
group0 {
pinmux = <SPI1_PCS0_PTB10>,
<SPI1_PCS1_PTB9>,
<SPI1_SCK_PTB11>,
<SPI1_SIN_PTB17>,
<SPI1_SOUT_PTB16>;
drive-strength = "low";
slew-rate = "fast";
};
};
spi2_default: spi2_default {
group0 {
pinmux = <SPI2_PCS0_PTB20>,
<SPI2_SCK_PTB21>,
<SPI2_SIN_PTB23>,
<SPI2_SOUT_PTB22>;
drive-strength = "low";
slew-rate = "fast";
};
};
uart0_default: uart0_default {
group0 {
pinmux = <UART0_RX_PTA1>,
<UART0_TX_PTA2>;
drive-strength = "low";
slew-rate = "fast";
};
};
uart1_default: uart1_default {
group0 {
pinmux = <UART1_RX_PTC3>,
<UART1_TX_PTC4>;
drive-strength = "low";
slew-rate = "fast";
};
};
/* conflicts with FTM3 */
uart2_default: uart2_default {
group0 {
pinmux = <UART2_RX_PTD2>,
<UART2_TX_PTD3>;
drive-strength = "low";
slew-rate = "fast";
};
};
uart4_default: uart4_default {
group0 {
pinmux = <UART4_CTS_b_PTC13>,
<UART4_RTS_b_PTE27>,
<UART4_RX_PTC14>,
<UART4_TX_PTC15>;
drive-strength = "low";
slew-rate = "fast";
};
};
};