blob: 59c671bc121bc4f210e581489a04349025e679fc [file] [log] [blame]
/*
* Copyright (c) 2018-2019 PHYTEC Messtechnik GmbH
* Copyright (c) 2017 Linaro Limited
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "reel_board.dtsi"
#include "reel_board-pinctrl.dtsi"
/ {
model = "reel board";
compatible = "phytec,reel_board";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
zephyr,display = &ssd16xx;
};
leds {
compatible = "gpio-leds";
back_led: led_3 {
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
label = "User D13 green";
};
};
pwmleds {
compatible = "pwm-leds";
back_pwm_led: pwm_led_3 {
pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
};
};
aliases {
led3 = &back_led;
pwm-led3 = &back_pwm_led;
watchdog0 = &wdt0;
};
mipi_dbi {
compatible = "zephyr,mipi-dbi-spi";
spi-dev = <&spi1>;
reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
dc-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ssd16xx: ssd16xxfb@0 {
compatible = "gooddisplay,gdeh0213b1", "solomon,ssd1673";
mipi-max-frequency = <4000000>;
reg = <0>;
width = <250>;
height = <122>;
busy-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
full {
gdv = [10 0a];
sdv = [19];
vcom = <0xa8>;
border-waveform = <0x71>;
dummy-line = <0x1a>;
gate-line-width = <0x08>;
lut = [
22 55 AA 55 AA 55 AA 11
00 00 00 00 00 00 00 00
1E 1E 1E 1E 1E 1E 1E 1E
01 00 00 00 00
];
};
partial {
gdv = [10 0a];
sdv = [19];
vcom = <0xa8>;
border-waveform = <0x71>;
dummy-line = <0x1a>;
gate-line-width = <0x08>;
lut = [
18 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
0F 01 00 00 00 00 00 00
00 00 00 00 00
];
};
};
};
};
&spi1 {
compatible = "nordic,nrf-spi";
status = "okay";
cs-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&spi1_default>;
pinctrl-1 = <&spi1_sleep>;
pinctrl-names = "default", "sleep";
};