blob: e29f214a1833a736d707885c49373c41252608fa [file] [log] [blame]
/*
* Copyright (c) 2023 Nuvoton Technology Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nuvoton_numaker_pinctrl
#include <zephyr/drivers/pinctrl.h>
#include <NuMicro.h>
/* Get mfp_base, it should be == (&SYS->GPA_MFP0) */
#define MFP_BASE DT_INST_REG_ADDR_BY_NAME(0, mfp)
#define MFOS_BASE DT_INST_REG_ADDR_BY_NAME(0, mfos)
#define GPA_BASE DT_REG_ADDR(DT_NODELABEL(gpioa))
#define GPIO_SIZE DT_REG_SIZE(DT_NODELABEL(gpioa))
#define SLEWCTL_PIN_SHIFT(pin_idx) ((pin_idx) * 2)
#define SLEWCTL_MASK(pin_idx) (3 << SLEWCTL_PIN_SHIFT(pin_idx))
#define DINOFF_PIN_SHIFT(pin_idx) (pin_idx + GPIO_DINOFF_DINOFF0_Pos)
#define DINOFF_MASK(pin_idx) (1 << DINOFF_PIN_SHIFT(pin_idx))
static void gpio_configure(const pinctrl_soc_pin_t *pin, uint8_t port_idx, uint8_t pin_idx)
{
GPIO_T *port;
port = (GPIO_T *)(GPA_BASE + port_idx * GPIO_SIZE);
port->SMTEN = (port->SMTEN & ~BIT(pin_idx)) |
((pin->schmitt_enable ? 1 : 0) << pin_idx);
port->SLEWCTL = (port->SLEWCTL & ~SLEWCTL_MASK(pin_idx)) |
(pin->slew_rate << SLEWCTL_PIN_SHIFT(pin_idx));
port->DINOFF = (port->DINOFF & ~DINOFF_MASK(pin_idx)) |
((pin->digital_disable ? 1 : 0) << DINOFF_PIN_SHIFT(pin_idx));
}
/**
* Configure pin multi-function
*/
static void configure_pin(const pinctrl_soc_pin_t *pin)
{
uint32_t pin_mux = pin->pin_mux;
uint8_t pin_index = PIN_INDEX(pin_mux);
uint8_t port_index = PORT_INDEX(pin_mux);
uint32_t mfp_cfg = MFP_CFG(pin_mux);
uint32_t *GPx_MFPx = ((uint32_t *)MFP_BASE) + port_index * 4 + (pin_index / 4);
uint32_t *GPx_MFOSx = ((uint32_t *)MFOS_BASE) + port_index;
uint32_t pinMask = NU_MFP_MASK(pin_index);
/*
* E.g.: SYS->GPA_MFP0 = (SYS->GPA_MFP0 & (~SYS_GPA_MFP0_PA0MFP_Msk) ) |
* SYS_GPA_MFP0_PA0MFP_SC0_CD;
*/
*GPx_MFPx = (*GPx_MFPx & (~pinMask)) | mfp_cfg;
if (pin->open_drain != 0) {
*GPx_MFOSx |= BIT(pin_index);
} else {
*GPx_MFOSx &= ~BIT(pin_index);
}
gpio_configure(pin, port_index, pin_index);
}
/* Pinctrl API implementation */
int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt, uintptr_t reg)
{
ARG_UNUSED(reg);
/* Configure all peripheral devices' properties here. */
for (uint8_t i = 0U; i < pin_cnt; i++) {
configure_pin(&pins[i]);
}
return 0;
}