blob: 104439e9a565825ad318a063a3b71be64deb3136 [file] [log] [blame]
/*
* SPDX-License-Identifier: Apache-2.0
*
* Copyright (c) 2023 Nuvoton Technology Corporation.
*/
#define DT_DRV_COMPAT nuvoton_numaker_spi
#include <errno.h>
#include <zephyr/kernel.h>
#include <zephyr/drivers/reset.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/clock_control/clock_control_numaker.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(spi_numaker, CONFIG_SPI_LOG_LEVEL);
#include "spi_context.h"
#include <NuMicro.h>
#define SPI_NUMAKER_TX_NOP 0x00
struct spi_numaker_config {
SPI_T *spi;
bool is_qspi;
const struct reset_dt_spec reset;
/* clock configuration */
uint32_t clk_modidx;
uint32_t clk_src;
uint32_t clk_div;
const struct device *clk_dev;
const struct pinctrl_dev_config *pincfg;
};
struct spi_numaker_data {
struct spi_context ctx;
};
/*
* CPOL/CPHA = 0/0 --> SPI_MODE_0
* CPOL/CPHA = 0/1 --> SPI_MODE_1
* CPOL/CPHA = 1/0 --> SPI_MODE_2
* CPOL/CPHA = 1/1 --> SPI_MODE_3
*/
static const uint32_t smode_tbl[4] = {
SPI_MODE_0, SPI_MODE_1, SPI_MODE_2, SPI_MODE_3
};
static const uint32_t qsmode_tbl[4] = {
QSPI_MODE_0, QSPI_MODE_1, QSPI_MODE_2, QSPI_MODE_3
};
static int spi_numaker_configure(const struct device *dev, const struct spi_config *config)
{
int mode;
struct spi_numaker_data *data = dev->data;
const struct spi_numaker_config *dev_cfg = dev->config;
LOG_DBG("%s", __func__);
if (spi_context_configured(&data->ctx, config)) {
return 0;
}
if (SPI_MODE_GET(config->operation) & SPI_MODE_LOOP) {
LOG_ERR("Loop back mode not support");
return -ENOTSUP;
}
if (SPI_OP_MODE_GET(config->operation) == SPI_OP_MODE_SLAVE) {
LOG_ERR("Slave mode not support");
return -ENOTSUP;
}
/* Clear FIFO */
SPI_ClearRxFIFO(dev_cfg->spi);
SPI_ClearTxFIFO(dev_cfg->spi);
if (SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) {
mode = (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) ? 3 : 2;
} else {
mode = (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) ? 1 : 0;
}
/* Make SPI module be ready to transfer */
if (dev_cfg->is_qspi) {
QSPI_Open((QSPI_T *)dev_cfg->spi,
(SPI_OP_MODE_GET(config->operation) == SPI_OP_MODE_SLAVE) ? QSPI_SLAVE
: QSPI_MASTER,
qsmode_tbl[mode],
SPI_WORD_SIZE_GET(config->operation), config->frequency);
} else {
SPI_Open(dev_cfg->spi,
(SPI_OP_MODE_GET(config->operation) == SPI_OP_MODE_SLAVE) ? SPI_SLAVE
: SPI_MASTER,
smode_tbl[mode],
SPI_WORD_SIZE_GET(config->operation), config->frequency);
}
/* Set Transfer LSB or MSB first */
if ((config->operation) & SPI_TRANSFER_LSB) {
SPI_SET_LSB_FIRST(dev_cfg->spi);
} else {
SPI_SET_MSB_FIRST(dev_cfg->spi);
}
/* full/half duplex */
if (config->operation & SPI_HALF_DUPLEX) {
/* half duplex, which results in 3-wire usage */
SPI_ENABLE_3WIRE_MODE(dev_cfg->spi);
} else {
/* full duplex */
SPI_DISABLE_3WIRE_MODE(dev_cfg->spi);
}
/* Active high CS logic */
if (config->operation & SPI_CS_ACTIVE_HIGH) {
SPI_SET_SS_HIGH(dev_cfg->spi);
} else {
SPI_SET_SS_LOW(dev_cfg->spi);
}
/* Enable the automatic hardware slave select function. Select the SS pin and configure as
* low-active.
*/
if (data->ctx.num_cs_gpios != 0) {
SPI_EnableAutoSS(dev_cfg->spi, SPI_SS, SPI_SS_ACTIVE_LOW);
} else {
SPI_DisableAutoSS(dev_cfg->spi);
}
/* Be able to set TX/RX FIFO threshold, for ex: SPI_SetFIFO(dev_cfg->spi, 2, 2) */
data->ctx.config = config;
return 0;
}
static int spi_numaker_txrx(const struct device *dev)
{
struct spi_numaker_data *data = dev->data;
const struct spi_numaker_config *dev_cfg = dev->config;
struct spi_context *ctx = &data->ctx;
uint32_t tx_frame, rx_frame;
uint8_t word_size, spi_dfs;
uint32_t time_out_cnt;
LOG_DBG("%s", __func__);
word_size = SPI_WORD_SIZE_GET(ctx->config->operation);
switch (word_size) {
case 8:
spi_dfs = 1;
break;
case 16:
spi_dfs = 2;
break;
case 24:
spi_dfs = 3;
break;
case 32:
spi_dfs = 4;
break;
default:
spi_dfs = 0;
LOG_ERR("Not support SPI WORD size as [%d] bits", word_size);
return -EIO;
}
LOG_DBG("%s -->word_size [%d]", __func__, word_size);
if (spi_context_tx_on(ctx)) {
tx_frame = ((ctx->tx_buf == NULL) ? SPI_NUMAKER_TX_NOP
: UNALIGNED_GET((uint8_t *)(data->ctx.tx_buf)));
/* Write to TX register */
SPI_WRITE_TX(dev_cfg->spi, tx_frame);
spi_context_update_tx(ctx, spi_dfs, 1);
/* Check SPI busy status */
time_out_cnt = SystemCoreClock; /* 1 second time-out */
while (SPI_IS_BUSY(dev_cfg->spi)) {
if (--time_out_cnt == 0) {
LOG_ERR("Wait for SPI time-out");
return -EIO;
}
}
LOG_DBG("%s --> TX [0x%x] done", __func__, tx_frame);
} else {
/* Write dummy data to TX register */
SPI_WRITE_TX(dev_cfg->spi, 0x00U);
time_out_cnt = SystemCoreClock; /* 1 second time-out */
while (SPI_IS_BUSY(dev_cfg->spi)) {
if (--time_out_cnt == 0) {
LOG_ERR("Wait for SPI time-out");
return -EIO;
}
}
}
/* Read received data */
if (spi_context_rx_on(ctx)) {
if (SPI_GET_RX_FIFO_COUNT(dev_cfg->spi) > 0) {
rx_frame = SPI_READ_RX(dev_cfg->spi);
if (ctx->rx_buf != NULL) {
UNALIGNED_PUT(rx_frame, (uint8_t *)data->ctx.rx_buf);
}
spi_context_update_rx(ctx, spi_dfs, 1);
LOG_DBG("%s --> RX [0x%x] done", __func__, rx_frame);
}
}
LOG_DBG("%s --> exit", __func__);
return 0;
}
/* Remain TX/RX Data in spi_context TX/RX buffer */
static bool spi_numaker_remain_words(struct spi_numaker_data *data)
{
return spi_context_tx_on(&data->ctx) || spi_context_rx_on(&data->ctx);
}
static int spi_numaker_transceive(const struct device *dev, const struct spi_config *config,
const struct spi_buf_set *tx_bufs,
const struct spi_buf_set *rx_bufs)
{
struct spi_numaker_data *data = dev->data;
struct spi_context *ctx = &data->ctx;
const struct spi_numaker_config *dev_cfg = dev->config;
int ret;
LOG_DBG("%s", __func__);
spi_context_lock(ctx, false, NULL, NULL, config);
ctx->config = config;
ret = spi_numaker_configure(dev, config);
if (ret < 0) {
goto done;
}
SPI_ENABLE(dev_cfg->spi);
spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, 1);
/* if cs is defined: software cs control, set active true */
if (spi_cs_is_gpio(config)) {
spi_context_cs_control(&data->ctx, true);
}
/* transceive tx/rx data */
do {
ret = spi_numaker_txrx(dev);
if (ret < 0) {
break;
}
} while (spi_numaker_remain_words(data));
/* if cs is defined: software cs control, set active false */
if (spi_cs_is_gpio(config)) {
spi_context_cs_control(&data->ctx, false);
}
SPI_DISABLE(dev_cfg->spi);
done:
spi_context_release(ctx, ret);
LOG_DBG("%s --> [%d]", __func__, ret);
return ret;
}
static int spi_numaker_release(const struct device *dev, const struct spi_config *config)
{
struct spi_numaker_data *data = dev->data;
struct spi_context *ctx = &data->ctx;
if (!spi_context_configured(ctx, config)) {
return -EINVAL;
}
spi_context_unlock_unconditionally(ctx);
return 0;
}
static const struct spi_driver_api spi_numaker_driver_api = {
.transceive = spi_numaker_transceive,
.release = spi_numaker_release
};
static int spi_numaker_init(const struct device *dev)
{
struct spi_numaker_data *data = dev->data;
const struct spi_numaker_config *dev_cfg = dev->config;
int err = 0;
struct numaker_scc_subsys scc_subsys;
SYS_UnlockReg();
/* CLK controller */
memset(&scc_subsys, 0x00, sizeof(scc_subsys));
scc_subsys.subsys_id = NUMAKER_SCC_SUBSYS_ID_PCC;
scc_subsys.pcc.clk_modidx = dev_cfg->clk_modidx;
scc_subsys.pcc.clk_src = dev_cfg->clk_src;
scc_subsys.pcc.clk_div = dev_cfg->clk_div;
/* Equivalent to CLK_EnableModuleClock() */
err = clock_control_on(dev_cfg->clk_dev, (clock_control_subsys_t)&scc_subsys);
if (err != 0) {
goto done;
}
/* Equivalent to CLK_SetModuleClock() */
err = clock_control_configure(dev_cfg->clk_dev, (clock_control_subsys_t)&scc_subsys, NULL);
if (err != 0) {
goto done;
}
err = pinctrl_apply_state(dev_cfg->pincfg, PINCTRL_STATE_DEFAULT);
if (err) {
LOG_ERR("Failed to apply pinctrl state");
goto done;
}
err = spi_context_cs_configure_all(&data->ctx);
if (err < 0) {
goto done;
}
spi_context_unlock_unconditionally(&data->ctx);
/* Reset this module, same as BSP's SYS_ResetModule(id_rst) */
if (!device_is_ready(dev_cfg->reset.dev)) {
LOG_ERR("reset controller not ready");
err = -ENODEV;
goto done;
}
/* Reset SPI to default state */
reset_line_toggle_dt(&dev_cfg->reset);
done:
SYS_LockReg();
return err;
}
#define NUMAKER_SPI_INIT(inst) \
PINCTRL_DT_INST_DEFINE(inst); \
static struct spi_numaker_data spi_numaker_data_##inst = { \
SPI_CONTEXT_INIT_LOCK(spi_numaker_data_##inst, ctx), \
SPI_CONTEXT_INIT_SYNC(spi_numaker_data_##inst, ctx), \
SPI_CONTEXT_CS_GPIOS_INITIALIZE(DT_DRV_INST(inst), ctx)}; \
static struct spi_numaker_config spi_numaker_config_##inst = { \
.spi = (SPI_T *)DT_INST_REG_ADDR(inst), \
.is_qspi = DT_INST_NODE_HAS_PROP(inst, qspi), \
.reset = RESET_DT_SPEC_INST_GET(inst), \
.clk_modidx = DT_INST_CLOCKS_CELL(inst, clock_module_index), \
.clk_src = DT_INST_CLOCKS_CELL(inst, clock_source), \
.clk_div = DT_INST_CLOCKS_CELL(inst, clock_divider), \
.clk_dev = DEVICE_DT_GET(DT_PARENT(DT_INST_CLOCKS_CTLR(inst))), \
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
}; \
DEVICE_DT_INST_DEFINE(inst, &spi_numaker_init, NULL, &spi_numaker_data_##inst, \
&spi_numaker_config_##inst, POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, \
&spi_numaker_driver_api);
DT_INST_FOREACH_STATUS_OKAY(NUMAKER_SPI_INIT)