| /* |
| * Copyright (c) 2021 Espressif Systems (Shanghai) Co., Ltd. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include <mem.h> |
| #include <freq.h> |
| #include <zephyr/dt-bindings/adc/adc.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/interrupt-controller/esp-esp32c3-intmux.h> |
| #include <zephyr/dt-bindings/clock/esp32c3_clock.h> |
| #include <dt-bindings/pinctrl/esp32-pinctrl.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| die-temp0 = &coretemp; |
| }; |
| |
| chosen { |
| zephyr,canbus = &twai; |
| zephyr,entropy = &trng0; |
| zephyr,flash-controller = &flash; |
| zephyr,bt-hci = &esp32_bt_hci; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "espressif,riscv", "riscv"; |
| riscv,isa = "rv32imc_zicsr"; |
| reg = <0>; |
| cpu-power-states = <&light_sleep &deep_sleep>; |
| clock-source = <ESP32_CPU_CLK_SRC_PLL>; |
| clock-frequency = <DT_FREQ_M(160)>; |
| xtal-freq = <DT_FREQ_M(40)>; |
| }; |
| |
| power-states { |
| light_sleep: light_sleep { |
| compatible = "zephyr,power-state"; |
| power-state-name = "standby"; |
| min-residency-us = <200>; |
| exit-latency-us = <60>; |
| }; |
| |
| deep_sleep: deep_sleep { |
| compatible = "zephyr,power-state"; |
| power-state-name = "soft-off"; |
| min-residency-us = <660>; |
| exit-latency-us = <105>; |
| }; |
| }; |
| }; |
| |
| pinctrl: pin-controller { |
| compatible = "espressif,esp32-pinctrl"; |
| status = "okay"; |
| }; |
| |
| wifi: wifi { |
| compatible = "espressif,esp32-wifi"; |
| status = "disabled"; |
| }; |
| |
| esp32_bt_hci: esp32_bt_hci { |
| compatible = "espressif,esp32-bt-hci"; |
| status = "disabled"; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| |
| sram0: memory@3fc7c000 { |
| compatible = "mmio-sram"; |
| reg = <0x3fc7c000 0x50000>; |
| }; |
| |
| intc: interrupt-controller@600c2000 { |
| compatible = "espressif,esp32-intc"; |
| #address-cells = <0>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x600c2000 0x198>; |
| status = "okay"; |
| }; |
| |
| systimer0: systimer@60023000 { |
| compatible = "espressif,esp32-systimer"; |
| reg = <0x60023000 0x80>; |
| interrupts = <SYSTIMER_TARGET0_EDGE_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| status = "okay"; |
| }; |
| |
| rtc: rtc@60008000 { |
| compatible = "espressif,esp32-rtc"; |
| reg = <0x60008000 0x1000>; |
| fast-clk-src = <ESP32_RTC_FAST_CLK_SRC_RC_FAST>; |
| slow-clk-src = <ESP32_RTC_SLOW_CLK_SRC_RC_SLOW>; |
| #clock-cells = <1>; |
| status = "okay"; |
| }; |
| |
| xt_wdt: xt_wdt@60008004 { |
| compatible = "espressif,esp32-xt-wdt"; |
| reg = <0x60008004 0x4>; |
| clocks = <&rtc ESP32_MODULE_MAX>; |
| interrupts = <RTC_CORE_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| rtc_timer: rtc_timer@60008004 { |
| reg = <0x60008004 0xC>; |
| compatible = "espressif,esp32-rtc-timer"; |
| clocks = <&rtc ESP32_MODULE_MAX>; |
| interrupts = <RTC_CORE_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| status = "okay"; |
| }; |
| |
| flash: flash-controller@60002000 { |
| compatible = "espressif,esp32-flash-controller"; |
| reg = <0x60002000 0x1000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| flash0: flash@0 { |
| compatible = "soc-nv-flash"; |
| reg = <0 0x400000>; |
| erase-block-size = <4096>; |
| write-block-size = <4>; |
| }; |
| }; |
| |
| gpio0: gpio@60004000 { |
| compatible = "espressif,esp32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x60004000 0x800>; |
| interrupts = <GPIO_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| /* Maximum available pins (per port) |
| * Actual occupied pins are specified |
| * on part number dtsi level, using |
| * the `gpio-reserved-ranges` property. |
| */ |
| ngpios = <26>; /* 0..25 */ |
| }; |
| |
| i2c0: i2c@60013000 { |
| compatible = "espressif,esp32-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x60013000 0x1000>; |
| interrupts = <I2C_EXT0_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_I2C0_MODULE>; |
| status = "disabled"; |
| }; |
| |
| uart0: uart@60000000 { |
| compatible = "espressif,esp32-uart"; |
| reg = <0x60000000 0x400>; |
| status = "disabled"; |
| interrupts = <UART0_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_UART0_MODULE>; |
| }; |
| |
| uart1: uart@60010000 { |
| compatible = "espressif,esp32-uart"; |
| reg = <0x60010000 0x400>; |
| status = "disabled"; |
| interrupts = <UART1_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_UART1_MODULE>; |
| current-speed = <115200>; |
| }; |
| |
| ledc0: ledc@60019000 { |
| compatible = "espressif,esp32-ledc"; |
| pwm-controller; |
| #pwm-cells = <3>; |
| reg = <0x60019000 0x1000>; |
| clocks = <&rtc ESP32_LEDC_MODULE>; |
| status = "disabled"; |
| }; |
| |
| usb_serial: uart@60043000 { |
| compatible = "espressif,esp32-usb-serial"; |
| reg = <0x60043000 0x400>; |
| status = "disabled"; |
| interrupts = <USB_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_USB_MODULE>; |
| }; |
| |
| timer0: counter@6001f000 { |
| compatible = "espressif,esp32-timer"; |
| reg = <0x6001F000 DT_SIZE_K(4)>; |
| group = <0>; |
| index = <0>; |
| interrupts = <TG0_T0_LEVEL_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| timer1: counter@60020000 { |
| compatible = "espressif,esp32-timer"; |
| reg = <0x60020000 DT_SIZE_K(4)>; |
| group = <1>; |
| index = <0>; |
| interrupts = <TG1_T0_LEVEL_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| trng0: trng@3ff700b0 { |
| compatible = "espressif,esp32-trng"; |
| reg = <0x3FF700B0 0x4>; |
| status = "disabled"; |
| }; |
| |
| twai: can@6002b000 { |
| compatible = "espressif,esp32-twai"; |
| reg = <0x6002b000 DT_SIZE_K(4)>; |
| interrupts = <TWAI_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_TWAI_MODULE>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@60024000 { |
| compatible = "espressif,esp32-spi"; |
| reg = <0x60024000 DT_SIZE_K(4)>; |
| interrupts = <SPI2_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_SPI2_MODULE>; |
| dma-clk = <ESP32_GDMA_MODULE>; |
| dma-host = <0>; |
| status = "disabled"; |
| }; |
| |
| wdt0: watchdog@6001f048 { |
| compatible = "espressif,esp32-watchdog"; |
| reg = <0x6001f048 0x20>; |
| interrupts = <TG0_WDT_LEVEL_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_TIMG0_MODULE>; |
| status = "disabled"; |
| }; |
| |
| wdt1: watchdog@60020048 { |
| compatible = "espressif,esp32-watchdog"; |
| reg = <0x60020048 0x20>; |
| interrupts = <TG1_WDT_LEVEL_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_TIMG1_MODULE>; |
| status = "disabled"; |
| }; |
| |
| coretemp: coretemp@60040058 { |
| compatible = "espressif,esp32-temp"; |
| friendly-name = "coretemp"; |
| reg = <0x60040058 0x4>; |
| status = "disabled"; |
| }; |
| |
| adc0: adc@60040000 { |
| compatible = "espressif,esp32-adc"; |
| reg = <0x60040000 4>; |
| unit = <1>; |
| channel-count = <5>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| adc1: adc@60040004 { |
| compatible = "espressif,esp32-adc"; |
| reg = <0x60040004 4>; |
| unit = <2>; |
| channel-count = <2>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| dma: dma@6003f000 { |
| compatible = "espressif,esp32-gdma"; |
| reg = <0x6003f000 DT_SIZE_K(4)>; |
| #dma-cells = <1>; |
| interrupts = |
| <DMA_CH0_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>, |
| <DMA_CH1_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>, |
| <DMA_CH2_INTR_SOURCE IRQ_DEFAULT_PRIORITY 0>; |
| interrupt-parent = <&intc>; |
| clocks = <&rtc ESP32_GDMA_MODULE>; |
| dma-channels = <6>; |
| dma-buf-addr-alignment = <4>; |
| status = "disabled"; |
| }; |
| |
| }; |
| |
| }; |