| /* |
| * Copyright 2023 Google LLC |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| / { |
| test { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| test_adc: adc@adc0adc0 { |
| compatible = "vnd,adc"; |
| reg = <0xadc0adc0 0x1000>; |
| #io-channel-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| channel@0 { |
| reg = <0>; |
| zephyr,gain = "ADC_GAIN_1"; |
| zephyr,reference = "ADC_REF_VDD_1"; |
| zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>; |
| }; |
| }; |
| |
| test_gpio: gpio@0 { |
| compatible = "vnd,gpio"; |
| gpio-controller; |
| reg = <0x0 0x1000>; |
| #gpio-cells = <0x2>; |
| status = "okay"; |
| }; |
| |
| adc-keys { |
| compatible = "adc-keys"; |
| io-channels = <&test_adc 0>; |
| keyup-threshold-mv = <0>; |
| button_0 { |
| press-thresholds-mv = <1500>, <1750>; |
| zephyr,code = <0>; |
| }; |
| button_1 { |
| press-thresholds-mv = <2500>, <1750>; |
| zephyr,code = <1>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| debounce-interval-ms = <30>; |
| button_0 { |
| gpios = <&test_gpio 0 0>; |
| zephyr,code = <0>; |
| }; |
| }; |
| |
| gpio-keys-polled { |
| compatible = "gpio-keys"; |
| debounce-interval-ms = <30>; |
| button_0 { |
| gpios = <&test_gpio 0 0>; |
| zephyr,code = <0>; |
| }; |
| polling-mode; |
| }; |
| |
| evdev { |
| compatible = "zephyr,native-linux-evdev"; |
| }; |
| |
| kbd-matrix-0 { |
| compatible = "gpio-kbd-matrix"; |
| row-gpios = <&test_gpio 0 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>, |
| <&test_gpio 1 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| col-gpios = <&test_gpio 2 GPIO_ACTIVE_LOW>, |
| <&test_gpio 3 GPIO_ACTIVE_LOW>, |
| <&test_gpio 4 GPIO_ACTIVE_LOW>; |
| actual-key-mask = <0x0f 0x0a 0x0b>; |
| |
| keymap { |
| compatible = "input-keymap"; |
| keymap = <0 1 2>; |
| row-size = <2>; |
| col-size = <2>; |
| }; |
| }; |
| |
| kbd-matrix-1 { |
| compatible = "gpio-kbd-matrix"; |
| row-gpios = <&test_gpio 0 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, |
| <&test_gpio 1 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, |
| <&test_gpio 2 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>; |
| col-gpios = <&test_gpio 3 GPIO_ACTIVE_HIGH>, |
| <&test_gpio 4 GPIO_ACTIVE_HIGH>; |
| col-drive-inactive; |
| idle-mode = "poll"; |
| }; |
| |
| kbd-matrix-2 { |
| compatible = "gpio-kbd-matrix"; |
| row-gpios = <&test_gpio 0 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, |
| <&test_gpio 1 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, |
| <&test_gpio 2 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>; |
| col-gpios = <&test_gpio 3 GPIO_ACTIVE_HIGH>, |
| <&test_gpio 4 GPIO_ACTIVE_HIGH>; |
| poll-timeout-ms = <0>; |
| idle-mode = "scan"; |
| }; |
| |
| qdec-gpio { |
| compatible = "gpio-qdec"; |
| gpios = <&test_gpio 0 0>, <&test_gpio 1 0>; |
| steps-per-period = <4>; |
| zephyr,axis = <0>; |
| sample-time-us = <2000>; |
| idle-timeout-ms = <200>; |
| }; |
| |
| qdec-gpio-polled { |
| compatible = "gpio-qdec"; |
| gpios = <&test_gpio 0 0>, <&test_gpio 1 0>; |
| led-gpios = <&test_gpio 2 0>; |
| led-pre-us = <5>; |
| steps-per-period = <4>; |
| zephyr,axis = <0>; |
| sample-time-us = <2000>; |
| idle-timeout-ms = <200>; |
| idle-poll-time-us = <5000>; |
| }; |
| |
| analog_axis { |
| compatible = "analog-axis"; |
| axis-x { |
| io-channels = <&test_adc 0>; |
| out-min = <(-127)>; |
| out-max = <127>; |
| in-deadzone = <8>; |
| in-min = <(-100)>; |
| in-max = <100>; |
| zephyr,axis = <0>; |
| invert; |
| }; |
| }; |
| |
| longpress: longpress { |
| input = <&longpress>; |
| compatible = "zephyr,input-longpress"; |
| input-codes = <0>; |
| short-codes = <0>; |
| long-codes = <0>; |
| long-delay-ms = <100>; |
| }; |
| |
| i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "vnd,i2c"; |
| reg = <0x1 0x1000>; |
| status = "okay"; |
| clock-frequency = <100000>; |
| |
| ft5336@0 { |
| compatible = "focaltech,ft5336"; |
| reg = <0x0>; |
| int-gpios = <&test_gpio 0 0>; |
| }; |
| |
| gt911@1 { |
| compatible = "goodix,gt911"; |
| reg = <0x1>; |
| irq-gpios = <&test_gpio 0 0>; |
| reset-gpios = <&test_gpio 1 0>; |
| }; |
| |
| cst816s@2 { |
| compatible = "hynitron,cst816s"; |
| reg = <0x2>; |
| irq-gpios = <&test_gpio 0 0>; |
| rst-gpios = <&test_gpio 1 0>; |
| }; |
| |
| cap1203@3 { |
| compatible = "microchip,cap1203"; |
| reg = <0x3>; |
| int-gpios = <&test_gpio 0 0>; |
| input-codes = <0 1 2>; |
| }; |
| |
| stmpe811@4 { |
| compatible = "st,stmpe811"; |
| reg = <0x4>; |
| int-gpios = <&test_gpio 0 0>; |
| panel-driver-settling-time-us = <10>; |
| touch-detect-delay-us = <10>; |
| touch-average-control = <1>; |
| tracking-index = <0>; |
| }; |
| |
| pat@5 { |
| compatible = "pixart,pat912x"; |
| reg = <0x5>; |
| motion-gpios = <&test_gpio 0 0>; |
| zephyr,axis-x = <0>; |
| zephyr,axis-y = <1>; |
| res-x-cpi = <0>; |
| res-y-cpi = <0>; |
| invert-x; |
| invert-y; |
| sleep1-enable; |
| sleep2-enable; |
| }; |
| |
| cf1133@6 { |
| compatible = "sitronix,cf1133"; |
| reg = <0x6>; |
| int-gpios = <&test_gpio 0 0>; |
| }; |
| |
| chsc6x@7 { |
| compatible = "chipsemi,chsc6x"; |
| reg = <0x7>; |
| irq-gpios = <&test_gpio 0 0>; |
| }; |
| |
| pinnacle@2a { |
| compatible = "cirque,pinnacle"; |
| reg = <0x2a>; |
| data-ready-gpios = <&test_gpio 0 0>; |
| data-mode = "relative"; |
| primary-tap-enable; |
| swap-xy; |
| }; |
| }; |
| |
| spi@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "vnd,spi"; |
| reg = <0x2 0x1000>; |
| status = "okay"; |
| clock-frequency = <2000000>; |
| |
| /* one entry for every devices */ |
| cs-gpios = <&test_gpio 0 0>, |
| <&test_gpio 1 0>, |
| <&test_gpio 2 0>, |
| <&test_gpio 3 0>; |
| |
| xpt2046@0 { |
| compatible = "xptek,xpt2046"; |
| spi-max-frequency = <0>; |
| reg = <0x0>; |
| int-gpios = <&test_gpio 0 0>; |
| touchscreen-size-x = <10>; |
| touchscreen-size-y = <10>; |
| min-x = <0>; |
| min-y = <0>; |
| max-x = <1>; |
| max-y = <1>; |
| }; |
| |
| pmw3610@1 { |
| compatible = "pixart,pmw3610"; |
| spi-max-frequency = <0>; |
| reg = <0x1>; |
| motion-gpios = <&test_gpio 0 0>; |
| reset-gpios = <&test_gpio 1 0>; |
| zephyr,axis-x = <0>; |
| zephyr,axis-y = <1>; |
| invert-x; |
| invert-y; |
| force-awake; |
| smart-mode; |
| }; |
| |
| pinnacle@2 { |
| compatible = "cirque,pinnacle"; |
| reg = <0x2>; |
| spi-max-frequency = <0>; |
| data-ready-gpios = <&test_gpio 0 0>; |
| data-mode = "absolute"; |
| idle-packets-count = <20>; |
| clipping-enable; |
| scaling-enable; |
| invert-x; |
| invert-y; |
| }; |
| |
| paw32xx@3 { |
| compatible = "pixart,paw32xx"; |
| reg = <3>; |
| spi-max-frequency = <0>; |
| motion-gpios = <&test_gpio 0 0>; |
| zephyr,axis-x = <0>; |
| zephyr,axis-y = <1>; |
| invert-x; |
| invert-y; |
| res-cpi = <800>; |
| }; |
| }; |
| }; |
| }; |
