blob: 4f464a21b344571d7a873677e39a45ce6ace55f4 [file] [log] [blame]
/*
* Copyright 2018 Foundries.io Ltd
* SPDX-License-Identifier: Apache-2.0
*/
#include <riscv/rv32m1.dtsi>
/ {
aliases {
intmux = &intmux0;
system-lptmr = &lptmr0;
};
cpus {
/delete-node/ cpu@1;
};
};
&m4_flash {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* This configuration assumes the Arm cores are disabled, as
* these base addresses contain the Arm core vector tables if
* they are used.
*/
ri5cy_code_partition: partition@0 {
label = "ri5cy-code";
reg = <0x00000000 0x000fff00>;
};
ri5cy_vector_partition: partition@fff00 {
label = "ri5cy-vector";
reg = <0x000fff00 0x100>;
};
};
};
/*
* INTMUX channels below are somewhat arbitrary.
*
* The system timer (assumed at LPTMR0) is placed on channel 0, and peripherals
* are in channel 1. This can be overridden with overlays, e.g. to manage IRQ
* priorities, and it will Just Work, but using fewer channels here allows
* disabling unused ones in Kconfig, making the binary smaller.
*
* Each enabled channel requires 256 bytes in _sw_isr_table, so the savings for
* disabling channels can add up.
*/
&intmux0 {
interrupt-parent = <&event0>;
interrupts = <INTMUX_CH0_IRQ>, <INTMUX_CH1_IRQ>, <INTMUX_CH2_IRQ>, <INTMUX_CH3_IRQ>, <INTMUX_CH4_IRQ>, <INTMUX_CH5_IRQ>, <INTMUX_CH6_IRQ>, <INTMUX_CH7_IRQ>;
status = "okay";
};
&lptmr0 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH0, 7)>;
};
&lptmr1 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 8)>;
};
&lptmr2 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 22)>;
};
&gpioa {
interrupt-parent = <&event0>;
interrupts = <18>;
};
&gpiob {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 15)>;
};
&gpioc {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 16)>;
};
&gpiod {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 17)>;
};
&gpioe {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 27)>;
};
&uart0 {
interrupt-parent = <&event0>;
interrupts = <17>;
};
&uart1 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 13)>;
};
&uart2 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 14)>;
};
&uart3 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 26)>;
};
&i2c0 {
interrupt-parent = <&event0>;
interrupts = <15>;
};
&i2c1 {
interrupt-parent = <&event0>;
interrupts = <16>;
};
&i2c2 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 11)>;
};
&i2c3 {
interrupt-parent = <&intmux0>;
interrupts = <INTMUX_LEVEL2_IRQ(INTMUX_CH1, 24)>;
};